Jig Holder for Magswitch MagJig 95
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This thing holds a Magswitch MagJig 95 so it can easily be mounted to something else such as a shop jig.
- Rating
- 5 / 5
- Likes
- 84
- Downloads
- 223
- Makes
- 2
- Views
- 1,313
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This thing holds a Magswitch MagJig 95 so it can easily be mounted to something else. For my use I mounted two of them to a piece of plywood to make a drill press fence. It could also be used for other jigs on a table saw, router table, bandsaw, etc.
There are two versions: (1) the standard size "MagSwitchHolder-MK1.STL" and (2) a version with a slightly larger hole for the Magswitch called "MagSwitchHolder-MK1-extraTolerances.STL".
Printing:
- I used an adaptive layer height, but it could easily be printed with 0.2 to 0.3mm layers.
- 3 top and bottom layers
- 4 perimeters (for extra strength)
- 25% infill
- I used PETG as my garage gets quite hot in the summer
Mounting Hardware:
- To mount the holder to a jig (plywood in my case) I used #8 screws (4mm)
- To mount the MagSwitch MagJig 95 to the holder itself I used #6 screws that were 1" long. (3.5mm x 25mm)
Note: I also included the STEP files to aid in modifying the design.