Jig Holder for Magswitch MagJig 95
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This thing holds a Magswitch MagJig 95 so it can easily be mounted to something else such as a shop jig.
- Ocena
- 5 / 5
- Polubienia
- 84
- Pobrania
- 223
- Wydruki
- 2
- Wyświetlenia
- 1313
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This thing holds a Magswitch MagJig 95 so it can easily be mounted to something else. For my use I mounted two of them to a piece of plywood to make a drill press fence. It could also be used for other jigs on a table saw, router table, bandsaw, etc.
There are two versions: (1) the standard size "MagSwitchHolder-MK1.STL" and (2) a version with a slightly larger hole for the Magswitch called "MagSwitchHolder-MK1-extraTolerances.STL".
Printing:
- I used an adaptive layer height, but it could easily be printed with 0.2 to 0.3mm layers.
- 3 top and bottom layers
- 4 perimeters (for extra strength)
- 25% infill
- I used PETG as my garage gets quite hot in the summer
Mounting Hardware:
- To mount the holder to a jig (plywood in my case) I used #8 screws (4mm)
- To mount the MagSwitch MagJig 95 to the holder itself I used #6 screws that were 1" long. (3.5mm x 25mm)
Note: I also included the STEP files to aid in modifying the design.