Creality Ender 3 V3 SE dual 5015 blower minimal weight 2pcs
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
ender 3 v3 se dual 5015 blower minimal weight 2pcs
- Rating
- 5 / 5
- Likes
- 51
- Downloads
- 154
- Makes
- 2
- Views
- 3,453
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution
Ender 3 v3 se dual 5015 blower minimal weight 2pcs - base and fanduct hight is adjustable.
I wanted to make the lightest dual 5015 fan setup - ONLY 14 grams (no hardware - screws, fans and inserts).
what you need:
4 - heated inserts for M3 screws 4.5 mm OD and 6mm hight (3-6mm hight would work fine).
4 - 18mm M3 screws.
3 - 6mm M3 screws.
2 - 5015 blower fans connected parallel to each other. (JST 1.25mm head)
print with no supports, base flat on its back and 15-20 brim lines for the fanduct both 20% line infill. connect the base to the extruder and the fanduct just snaps on the fans.
printed in PLA and had no problems up to 220deg C with no problems at all , maybe higher temp is possible too havent checked yet , for ease of mind would use ASA or PETG.
if you have too much cooling problems i limited the fan in the slicer to 67%.
Please like if you like my design.
for more ender 3 v3 se mods check my profile.
