Zipper Pull - M&M

Items you need:

• 2 x “4mm x 30cm” paracord.
• *4 x “3mm (diameter) x 2mm (thick)” magnets (neodymium magnets are recommended for better holding power).
• Super glue (for components and magnets).

*If you do not have magnets, I have included a 3D printed option - Connector.

Suggested print settings for the Main Body:

• Layer height 0.2mm.
• Infill 30%.
• Position the print in a way that the joining face is facing downwards.
• Supports are needed around the overhang of the “M Text” area (refer to image, 3mf file also provided).

Suggested print settings for M Text:

• Layer height 0.2mm.
• Infill 15%.
• Position the print in a way that the front (the side that is showing ) side is facing downwards.
• No supports needed.

Assembly
Position the text with the smoother side (the side on the print bed) facing outward. Confirm that the text is correctly positioned and secure it in place with glue.

For more interesting zipper pull charms, be sure to track this tag (Zipperrific).

We've even conjured up a little home for our zipper pulls – because they deserve a stylish rest when they're not out and about with you! And to top it off, each zipper pull features a sneaky slit perfect for showcasing photos, name cards, and more. They're not just zipper pulls; they're your new tiny, table-top pals! 🌟

NOTE
Most of our designs are printed and tested on a Prusa Mini and MK4, so tolerances may vary if you are using a different brand. While we strive for a smooth experience with our designs, we appreciate your understanding if tolerance issues arise.