1 / 4
Squash Ball Feets for Prusa i3 MK3 (3030 profile)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This feet attaches to the Prusa i3 MK3 (or similar 3030 extrusion profiles). It holds a regular squash ball and lowers…
- Rating
- 4 / 5
- Likes
- 18
- Downloads
- 71
- Makes
- 1
- Views
- 874
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This feet attaches to the Prusa i3 MK3 (or similar 3030 extrusion profiles). It holds a regular squash ball and lowers the amount of vibration going into the ground. The shape resembles the overall design language of the Prusa printers.
Parts needed:
- M3x10 hex socket screw
- M3 T-Slot nut for 3030 profiles
- squash ball (d ~ 40 mm, double yellow)
Print Settings
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
25%
Filament:
Prusament PETG Prusa Orange
Notes:
Supports are not required. But if you enable them, the hexagon shaped hole on the front side may come out a bit nicer.