1 / 6
TPU gasket for X1C/P1S/P1P top plate REMIX
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I remixed the model by @SrenHejnfelt_1203880 for use on the top of the printer rather than on a riser.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 54
- Makes
- 0
- Views
- 511
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
- I printed this in 95a TPU with a 15% concentric infill.
- I used a .4mm nozzle with a .16 layer height using the “Generic TPU” preset in Bambu Slicer. I'm sure a .2mm nozzle with even a finer layer height would look a lot better as well.
- I used standard supports everywhere.
- I also printed this on the Bambu Lab High-Temperature plate. (not recommended without applying glue or some kind of separator before)
- I was testing out the fitment and have not glued it down to the printer yet. I'm deciding to print this in a black 95a TPU then deciding to glue down.
- *From the prints that I've ran after including the gasket under the lid* The vibration of the lid was way quieter especially when the printer was performing the input shaping calibration.
