Zipper Pull - Elmo (Sesame Street)
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.06 – €0.07 net (excluding VAT)
For file: Sesame Street - Elmo (Eyes Black)_0.4n_0.2mm_PLA_MINI_3m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.06 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 3 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Boring zippers no more! Expanding the Zipper Pull collection - Elmo from Sesame Street! New holder!
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 49
- Makes
- 0
- Views
- 313
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Fashion Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Items you need:
- 2 x “4mm x 30cm” paracord.
- *4 x “3mm (diameter) x 2mm (thick)” magnets (neodymium magnets are recommended for better holding power).
- Super glue (for the eyes, nose, mouth and magnets).
*If you do not have magnets, I have included a 3D printed Connector.
Suggested print settings for the Main Body:
- Layer height 0.2mm.
- Infill 30%.
- Position the print in a way that the joining face is facing downwards.
- No supports needed.
- Selected areas require a fuzzy feature (please refer to the attached 3MF files for guidance):
- Fuzzy Skin: Outside walls.
- Fuzzy skin point distance: 0.8mm (default).
- Fuzzy skin thickness: 0.3mm (default).
Suggested print settings for the Eyes, Nose & Mouth:
- Layer height 0.2mm.
- Infill 15%.
- Position the print in a way that the chamfered face is facing upwards (except for the Nose where the joining face is facing downwards).
- No supports needed.
Suggested print settings for Holder-Peg:
- Layer height 0.2mm.
- Infill 30%.
- Perimeters: 5 (for strength).
Suggested print settings for the Holder-Body:
- Layer height 0.2mm.
- Infill 15%.
- No supports needed.
- Selected areas require a fuzzy feature (please refer to the attached 3MF files for guidance):
- Fuzzy Skin: Outside walls.
- Fuzzy skin point distance: 0.8mm (default).
- Fuzzy skin thickness: 0.3mm (default).
Assembly
For the eyes and mouth, attach the chamfered side to the main body. Ensure the smoother side (the side on the print bed) faces outward.
For more interesting zipper pull charms, be sure to track this tag (Zipperrific).
We've even conjured up a little home for our zipper pulls – because they deserve a stylish rest when they're not out and about with you! And to top it off, each zipper pull features a sneaky slit perfect for showcasing photos, name cards, and more. They're not just zipper pulls; they're your new tiny, table-top pals!
NOTE
Most of our designs are printed and tested on a Prusa Mini and MK4, so tolerances may vary if you are using a different brand. While we strive for a smooth experience with our designs, we appreciate your understanding if tolerance issues arise.