Counting matching models…
In the pictures I only used one shelf (base) for each book stack. Correct print orientation is crucial for stability, more below. My Girlfriend needs a new bookshelf every month and she wanted to try an invisible one, so I over-engineered…
Print approx. €0.08–€0.09 excl. taxPreliminary estimate for PETGSource material: PET
The Donut Espresso Shaker is an espresso shaker that enables even distribution when preparing espresso for a wide range of portafilter sizes. What makes the Donut Shaker special is that it achieves this result with any portafilter size…
Print with 0.16 mm layer height , no support An extra plate can be printed from PETG or TPU and clamped into the deflector. This prevents the purge from sticking to the deflector. If the plate does not lift, simply glue it in place. The…
This is a remix of the great Umikot by @redfoxdude https://www.printables.com/de/model/481587-umikot-58mm-version-planetary-gear-spirograph-espr (more remix information at the end). How to use: Use the printed funnel (base) and pour the…
All smthng display housings for GaggiMate: https://www.printables.com/@dubios42/collections/2861668 Support my work: https://ko-fi.com/modsmthng Latest update (12 June 2026): Reduced the screw hole diameters, increased the wall thickness…
Before pushing the display into the housing, please make sure that the flat cable is centered over the cut-out. It is best to familiarize yourself with the installation instructions before installation (found in the files). All smthng…
All smthng display housings for GaggiMate: https://www.printables.com/@dubios42/collections/2861668 This is a remix of the version for the LilyGo 1.75 Amoled real pictures. The basic housing fits very well (Var0 and 1). The individual…
Please note that this case does not have a frame around the glass and therefore offers less protection! Alternatively, I recommend version 2 of this case with a frame! Before pushing the display into the housing, please make sure that the…
This holder doesn't need fasteners, they are integrated in the design for a stable hold. How to print: place it on the bottom 0.20 mm layer 2 Perimeters (Walls) enable support A remix made by @dubios for the Honeycomb storage wall from…
Please note that this case does not have a frame around the glass and therefore offers less protection! Alternatively, I recommend version 2 of this case with a frame! Before pushing the display into the housing, please make sure that the…
Update 21.02.2025: Lid with more tolerance added to make it easier to put on and take off ("normal fit") Print with 0.16mm layer hight, no support. I recommend PETG (easier to clean than PLA). Food Safety…
Base housing of the smthng display housing 3 (with frame and back clip) for GaggiMate . This version has no brackets and is therefore perfect for remixing or attaching to flat surfaces. To do this, add holes for screws in the slicer, for…
The internal structure ensures that the water no longer shoots out forcefully, so it also works if the hole in the drip tray is not directly below the adapter/tube. I recommend printing with PETG or another material that can withstand…
There is a small and a bigger version, just pick what you need. (The picture shows the small version) Print in place use 4-6 walls/perimeters, no support. To attach , start with the double-angled side and afterwards press down on the side…
CURRENTLY IN BETA PHASE: The current focus is on testing how well the frame fits onto the base. (The frame has a rounded underside, which I would like to retain as a design feature. However, this makes it somewhat challenging to design…
NOT for HV wiring! Check your local laws for the use of materials etc. for cable covers! There are only a few filaments that you should use for high-voltage covers. PLA, PETG, ABS, ASA, etc. are NOT suitable here! Cover and clip are just…
Simple housing for the LilyGo S3 AMOLED 1.75 inch display Var0: Basic housing Var1: Basic housing with back hole Var3: Basic housing with slanted back and hole Print without support U can use two screws for attachment: 1.4mm x 4-6mm or glue
***Umikot Flair Pro 2 rework is here! Check it out: https://www.printables.com/de/model/719084-umikot-flair-pro-2-rework *** I enjoyed the Umikot for Flair Pro 2 remix from @Vert, but in my workflow, I discovered things that didn't work…
Print horizontally (on the flat side) 6 Walls / Perimeters Infill: 25% Gyroid 0.2mm layer height Fast printer? Use a “strength” preset or lower the print speed (this improves stability) The holder supports rolls with a width of up to 120…
This switch bank mod can be used with or without an additional iron plate. The holes for the switches are 12mm in size. How to print: To print, position as shown in the image. Activate brim and support. Material should be heat-resistant…
Ikea's cooker hood solution, with the recirculation mode solution, typically comes with the NYTTIG TUB 150 (150mm diameter pipe). However, a cover for this is not offered. My solution can simply be plugged in and cannot be closed…
For gaggimate-pro-rev1 PCB housing Simply screw on during installation with a screw from the cover of the Gaggia. After installation, the holder can be cut off or used for cable routing (I personally use it for cable routing). Can also be…
How to print: Set the wall generator on Arachne and activate ironing if possible. Decals should look best/as original when they are painted to match afterwards. The images are currently placeholders, as I don't have a suitable paint yet.…
No longer current, version 1.6 of the “press fit” versions replace the “glue” versions, see table below: smthng display housings for GaggiMate: smthng display housing 1 (press fit) smthng display housing 1 (press fit and back clip)…
Added a finger loop to the Umikot58s - Spin Ring V2.1 NoHandle NoCountersunk
These are all currently available results.
