Counting matching models…
Story: I always have small things like screws, ball bearings, sensors, … lying around and I wanted to have a neat place to store them. The old wardrobe beside my desk offered a neat space to attach a small cupboard. Therefore I designed…
Story: The hair clip of my gf broke and I promised her to 3D-print one for her. I have used the old spring of her hair clip, but apparently, you can also buy one . You need to print the upper and the lower part with minimal support. 100%…
I often encountered the problem that I had to cut open my net pots when I wanted to transfer or harvest plants (see picture below) in my hydroponic system. Therefore I have designed a few net pots that can be opened and closed in order to…
To manipulate the output of the air hoses of my air pump I have designed this hose clamp. It consists of three parts: frame, screw and cap. After screwing the screw through the frame you can screw on the cap. You turn the screw with your…
Traveling case with aeration holes and a sliding lid for Oral-B electric toothbrush with 2 heads
Story: I bought a 60x40x40 Eurobox at my local Bauhaus. However, they were only available with open handles. I have searched for a suitable model and printed the model by Scruffy for 60x40x32 eurobox. Unfortunately, it was a loose fit.…
Story: My brother gifted me a Smarttag 2 for my birthday and I wanted to be able to locate my bike. Therefore I needed to find a way to attach the Smarttag to my bike . I have designed a case that can be attached under a bike seat with…
Story: I needed to connect the hose of my mini pump to a regular 13mm hose to be able to attach a Gardena quick connector . After the first version, I have added some chamfers so you can print without any support. If you have any trouble…
As I could not find a suitable mount for my servo, I have decided to design it myself. This model (there are two versions) mainly serves the purpose of mounting the servo to use the winch. This is the 2nd version of the model. That means…
Story: I accidentally broke the lamp shade of my gfs lamp. Immediately I told her that I will print a new one for her. She asked for a lamp shade in the shape of an umbrella. After doing some research I could not find a suitable model and…
Designing a 3D-printable nightstand was one of my first bigger projects because I could not find a good one that was not too overpriced. I have maxed out the build plate of my Neptune 4 to make the nightstand as big as possible. It is…
For everyone who has already printed the HolderArm_SnapIn_18mm and wants to use the TS101 :)
Story: We have recently moved into a new apartment. It is a nice flat, but pretty old. The bedroom and living room have two rows of windows each. During the winter months a lot of humidity accumulates between those windows. In order to…
My lovely co-worker blessed me with another project :). The original knob of her camping gas stove broke due to thin walls and years of usage. My design is a snug fit and has thick walls. It is recommended (but not really necessary) that…
Update (27/02/2025): I have added a heavy-duty and a wide (which works best!) version so you can hang heavier objects (e.g. a wet towel). Heavy-duty: you need to two magnets for each of the five slots. Wide: I have added three more slots…
Story: We started germinating our plants for our balcony. I used my LED-grow lamp ( LED grow strips + power cable + LED U-profile ) to support the little ones :). However, it wasnt easy to position the LED in the right position and…
Redesign of shower head holder with slide-in function to avoid screws! Perfect for rental apartments!
We have ordered a watering can Watering can , however the sprinkler head did not fit. That is why I have designed a simple adapter with an inner diameter of 24.5mm on the one side and outer diameter of 27mm on the other side. Now it is a…
Story: Our balcony got flooded with water and we were concerned that the legs of our table would rot. Therefore, I have designed this table leg protection. The model is specifically designed for this table . If you print one, please post…
Story: We needed a few plant coasters for our apartment, and I convinced my gf that I would print some for us. Inspired by this model by Michael , I have designed two different sizes (so far ;)). No supports needed! I have used PETG , but…
Story: I wanted to add a small drawer to my Flexispot desk . I played around with the idea and modelled this small but useful drawer. Inner diameter: 150mm x 209mm x 18mm Tabletop thickness: 25mm Print with Brim and without supports! No…
Story: We are planning our wedding and wanted to do something special for our Best Man and Maid of Honor. Thats why I have designed those rings for them. Two versions available: in German and English inner diameter Maid of…
Story: I wanted a higher desk without buying a new one. Therefore, I have designed table / desk elevation feet for different desks/tables. I will probably add new models over time :) No supports needed! I have used PETG , but you can also…
Story: We needed to insert different water level sensors into a DN 110 KG PVC pipe (see sensor-holder-for-kg-pvc-pipe ) and wanted to organise but also protect them. Thats why I have designed a lid which covers most of the top of the pipe…
Story: Our bags were (f)lying around in the kitchen, taking up a lot of space. Therefore, I have designed this little hanger to hang our grocery bags and can easily be attached to the shelving unit . The design has some play, so after…
Story: We needed to insert a water level sensor into a DN 110 KG PVC pipe for a project. Therefore, I have designed a holder that can hold such a sensor and perfectly aligns with the inner shape of the pipe. You need to drill a hole…
Story: During my daily commute to work, I was tired of holding my phone in my hand in order to watch videos. I have noticed a small gap in the cushion of the backrests of the ODEG (Ostdeutsche Eisenbahn GmbH) trains. It took me two…
These are all currently available results.
