163 models
Inspired by the Benchmade™ SOCP line of daggers, this pointy-ish defensive tool is not easily knocked out of your hand as you counterattack, gouging the thug's neck and eyeballs and whatnot. See Also Jérémy’s Weaponry Collection
Print approx. €0.61–€0.75 excl. taxPreliminary estimate for one variant
I adjusted the print settings to achieve a mass of 3 grams, in order to match the mass of my golf-club weights.
Print approx. €0.12–€0.15 excl. taxPreliminary estimate for one variant
This is a small model of the Cedar City temple of the Church of Jesus Christ, based on Kevin Carter's design. I print the perimeters very slowly and the innards very fast. See Also Pocatello Temple
Print approx. €5.41–€6.62 excl. taxPreliminary estimate for one variant
A fun toy for Asha dressup playtime, which also serves as a decoration or nightlight. Printing Note the zero bottom layers at the topmost segment of the candle compartment, the thin top, and the minimal infill throughout. These features…
Print approx. €1.79–€2.19 excl. taxPreliminary estimate for one variant
Sweet, now my tactical chapstick's got a new sheath* to replace the one that got smashed! * Sheath, cap, whatever you want to call it. Its purposes are to cap the container's end and to guard the adjustment mechanism. Unlike a typical…
Print approx. €0.71–€0.86 excl. taxPreliminary estimate for one variant
Print the pieces with spiral vase mode enabled, as well as sequential mode. In each color, you'll need: 1 sage 1 fool 2 couriers 4 pawns Print the bases with no top, no infill, and 0.6mm of total bottom thickness. Use sequential mode and…
Print approx. €0.23–€0.28 excl. taxPreliminary estimate for one variant
Raise your kid right. That American Girl™ doll needs a weapon, because the peace ain't gonna keep itself! At 26% of actual size, this scaled-down RC1 is well suited for use by any 18" doll. And when she's not using it, it'll look lovely…
Print approx. €1.28–€1.57 excl. taxPreliminary estimate for one variant
Print in spiral vase mode, just as with the rest of the set . Mount it on a penny-weighted base .
Print approx. €0.30–€0.37 excl. taxPreliminary estimate for one variant
Print in spiral vase mode, ideally with external-perimeter extrusion width of exactly 1.0mm. Solid bottom layers must total at least 1.0mm.
Print approx. €7.33–€8.96 excl. taxPreliminary estimate for one variant
Instructions Print in spiral vase mode , with very wide external-perimeter extrusions.
Print approx. €1.78–€2.18 excl. taxPreliminary estimate for one variant
RC1 Buttstock Decal ‘RC1’ is in a bold Asul font; the rest in Gidolinya . The smaller size of the other letters turned out terribly difficult to work with, so I ended up using only the 'RC1‘ part. Reeder Handguard Label The ‘Reeder’ label…
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for one variant
A simple top-loading blowgun of ½” PVC works well once a mini marshmallow reaches the chamber, but the ammunition tends to jam up in the loading tube. My 3D-printed loading tube resolves this with a tapered inner diameter that gets larger…
Print approx. €0.29–€0.36 excl. taxPreliminary estimate for one variant
PrusaSlicer filament profiles* for the various lines of filament produced by Polymaker. Because well-tuned material-specific settings outperform generic default settings. * Or ‘presets’ as the kids are now calling them. Observations…
This 90mm shoe is a display piece that I'm making as a gift for a little girl. It's meant to be printed in clear PVB filament and polished with alcohol in a vapor chamber. I provide two variants of the slipper, either of which will ensure…
These print profiles (or “presets” as the kids are now calling them) make for faster prints, compared to Josef Průša's profiles of similar Z-axis resolution. They can often produce fantastic aesthetics despite their speed, but their focus…
The source marked this model as adult content.
I designed this shelf to hold a diffuser on the side of my kitchen cupboard. No fancy curve, just a lopped-off corner. I painted it with my Woodgrain Stencil to mimic the appearance of a wooden shelf. Mounting Instructions Fasten the two…
Here's an ornament for your Christmas tree, to commemorate the birth of Jesus Christ. JOY is written in the Asul font, with a nativity scene in place of the O.
A divider for a closet's clothes-hanging rod.
My daughter uses this to hold a wedding veil on her doll's head.
The crawfish trap is just small enough to print on a 180x180mm bed, and just big enough to catch some gnarly crawfish. Directions Print three of the square panel. Print one back. Print one gate. Print one hardware kit. Attach the base…
Chunky square handguards, externally fluted to complete the distinctive Colt™ LMG look. Internally ribbed for extra strength. Each is made of two dovetail-jointed, pinned halves. Models are provided for rifle-length and mid-length gas…
Print in spiral vase mode with wide perimeter extrusions and several solid bottom layers. See my Watertight Spiral Print Profiles . If using this with a printed plant, consider printing my Potting Soil as well.
This stencil is ideally suited for use on pages at least 140mm wide, such as A5-size notebook pages. Line spacing is 7mm. The openings work well with the tips of Pilot G2-07 pens. For larger or finer tips, you may want to use your…
This is an insert for a boxing glove, designed to make it stay open wider when not in use so that the sweat inside it can dry up. I use it for my Krav Maga gloves. Its dimensions are identical to Isaac Howard's dryer, but mine is…
I use the silky stuff for shiny décor, and the polycarbonate is my favorite for durable outdoor prints. Instructions Put the .ini files in the directory where you keep your filament profiles (or ‘presets’, as the kids are now calling…
This screw-on sleeve is designed to protect the muzzle threads of certain firearm barrels when no muzzle device is installed. Its circumference is ribbed for grip so that it can be screwed on and off by hand. Supported thread specs are:…
These three- and four-compartmented paint-pouring cups allow you to pour multiple colors of paint simultaneously. Use them with acrylic paints to make pretty flower pots and whatnot. These models are derived from the designs of Jacob…
To vary the boldness of the grains, adjust the “XY size compensation” setting (aka “horizontal expansion”). The holes in the stencil get smaller as the value gets larger.
This is a minimalist bottle-rocket system with no complicated launchers and no unnecessary parts, so we can get straight to the fun part of flying the rocket. I'll be launching mine as soon as these crazy winds die down. Ingredients Air…
This is a small model of the Pocatello temple of the Church of Jesus Christ, based on Colton Jensen's design . See Also Cedar City Temple
This KRYPTEX is a longer variant of Hiob's 6-wheel cryptex. With a billion possible combinations as opposed to a million, it's a bit harder to crack. Hence the unambiguously hard K instead of a C in the name. ;-) Hiob's design is based on…
This set of “executive-size” (45mm) checkerboard squares is a simplified, frameless variant of Martin_au's larger modular modular tournament-size board . Interlock any number of squares to create a custom checkerboard grid. Common…
Based on Stephen Unser's two-piece star design.
Meet the Flexi Crocodile, a fun, stylized, and fully articulated crocodile model designed for Print-in-Place printing! With its adorable design, smooth articulation, and charming personality, this crocodile is perfect for collectors, toy…
A gift for a Nintendo lover. Design: I scaled rellmakes's Billy Bullet to 67%, enlarged its pegs for a better fit, and flattened their sides for easier printing. Then I designed a simple stand that fits in the bullet's cannelure to hold…
These print profiles* make for strong, gorgeous, seamless, watertight** prints in Spiral Vase Mode . (Non-spiral variants are coming soon.) Not the usual flimsy threads of Josef Průša's spiral print profiles. Notable characteristics of my…
A chess-themed chest of wood and metal, with compartments for two chess armies. Purpose I love muddymaker's treasure chests, and I needed one to store my Chess Pieces . But a legless variant with a more wooden appearance suits my taste…
This ambidextrous pouch allows the pistol operator to store two magazines of cartridges in his nondominant pants pocket. It holds the mags upright, minimizes rattle, and keeps pocket lint out, in contrast to carrying magazines in a pocket…
This stylish board for chess or checkers folds in half and provides storage for playing pieces.* Each square of the board measures 45 mm (~1¾", or "executive size") on each side. In order to fit within a 250x210-mm print bed, each…
I designed this to replace a worn-out cardboard crayon box, at my wife's request. It's internally ribbed to keep each crayon in its own slot as opposed to falling over into adjacent slots. The crayons around our house fit loosely enough,…
A shelf just big enough for a Synology mesh router, model MR2200ac, from which the router can't be removed unless the shelf is first removed from the wall. This ensures that the router can't fall off. Here's how it's done: Print the…
Suited for USGI M16 magazines and the like. Pictured with E-Lander™ 17-round magazines for 6.5 Grendel. Instructions Only the outer perimeters are modeled, so you must print this in spiral vase mode . Use external-perimeter extrusion…
These miniature pin-tumbler tweezers are designed for industry-standard 0.115" pins. The plug follower is meant for 0.495" plugs, as used by most lock makers. These tools will fit in an Altoids tin with room to spare. I suggest using…
For my latest version, which is meant to be easier to build, see Nike of Samothraki on Prow, Simplified . The original sculpture and her warship pedestal were found in the ancient Sanctuary of the Great Gods, on the island of Samothraki…
Optimized to print well in batches on an FFF-style printer without post-processing. Note the use of sequential printing mode, which avoids inter-wheel strings and the associated surface defects. Also note the use of the ‘Archimedean…
If your BSI™ or Střední™ glue spout gets all glued up before the bottle is empty, you can now print a replacement screw-on spout. A spout cap is also included, as well as a screw-on bottle cap. These are based on the models that aelkaim…
Print with a brim. The prebuilt gcode should be usable with nozzles from 0.4 to 0.8 mm. To get a snug fit in the wings, I warmed the octangular part of the clip with a heat gun, inserted it in the octangular hole in the wings, then…
This stencil has two sizes of wavy banners for headings. It also has a line that I use as a section divider, as well as a series of checkboxes and a series bullets.
This Dutch oven is a variant of Michael Francis's , scaled down and cut up to allow printing without much support. (I found the supports to be very time-consuming, and I'm not a patient man.) Print Settings Supports: For support enforcers…
Designed by Michael Dansie. This bookmark is meant to be printed as a single two-color piece, on a single-extruder printer, with a lot of ironing.
I maintain enhanced machine, filament, and process profiles for Snapmaker Orca in the following GitHub repo: https://github.com/jeremyreeder/snorca-profiles Purposes To improve print quality compared to factory-provided profiles. To…
This ambidextrous pouch allows the pistol operator to store two magazines of cartridges in his nondominant pants pocket. It holds the mags upright, minimizes rattle, and keeps pocket lint out, in contrast to carrying magazines in a pocket…
This little MOLLE panel is designed to fit either side of a utility bicycle fork such as the one included in Vélo Orange's second-generation Pass Hunter frameset, enabling the mounting of MOLLE-compatible bags as mini panniers. Or you can…
These printer profiles (or “presets” as the kids are now calling them) are meant for use with a Prusa™ Mini or Mini+ which has a Bondtech™ BMG or Bondtech™ IFS extruder installed. Profiles are included for InputShaper-enhanced printers…
Size: 180 x 179 x 174 mm Scale: 1:210 This is not an MMU-style multi-color print. It’s a series of single-material prints that, assembled, form a full-color replica of the Meridian temple. I printed the building in gray, spray-painted it…
Remove the factory silicone plugs and replace them with these four pegs, positioning their protrusions toward the printer’s centerline. Then place an inverted Samla 45L bin ($7 at IKEA) on top. Voilà ! With that cover and this five-gram…
Robbert Bakker modeled the individual pieces but left some details of successful manufacture to the imagination. Then he fell off the face of the earth for a while.* So I created a suitable arrangement of the pieces and tuned their print…
This is a work in progress. Most pieces go together easily now with little or no finishing, but the spring cover still needs refinement. Printing The boat prints in spiral vase mode, with the intention of making it hollow, lightweight,…
This ornament is based on a two-part nativity by Stephen Unser. Adapted to be printed as a single piece, with a color change near the end. Ironing is recommended. Colors White Copper
This pendant is derived from Barbara Pierce's shamrocks . I designed it in preparation for a kids' party because the store was low on St Patrick's Day necklaces. As for the small metal keyring that attaches the pendant to a string of…
The second temple of Jerusalem.
This little ergonomic foregrip mounts directly to a PDW's or carbine's handguard with ~23.3mm hole spacing, as an alternative to using a Picatinny rail as a middleman. Thus it keeps the added weight exceptionally low. See Also Jérémy’s…
Print in spiral vase mode with perimeter extrusions 1.2mm or wider, as the usual skinny extrusions make flimsy walls. See Also Fast Print Profiles – specifically the “Fast Sturdy Spiral” ones Simple Ribbed Box – a similar box, less prone…
Inspired by w00h's 5-compartment organizer for smaller packets . Print in spiral vase mode *, with at least 1mm of solid bottom layers. For external perimeters, I suggest an extrusion width of 1.2mm. * Since I only modeled the external…
A simple prop for martial-arts training, for use in practicing reaction to an attacker who is armed with a pistol. It's based on the dimensions of a Glock 43 with extended magazine. It has no sharp edges to cut or scrape you during…
I'm a retired safecracker. I created this slightly simplified model of a 20th-century mechanical combination safe lock to show how these locks work. It's got the dimensions and general style of Sargent & Greenleaf's left-hand-constructed…
I use these clips in conjuction with two rows of Tespo™ panels to make a rabbit pen with a bottom-hinged gate in in its top row to let kids through.
Based on PhullofPheomalanin's model, but with flat surfaces so that it can be easily printed without supports even from a larger nozzle. I recommend a layer height of 0.13mm or so. I'm no nålbinder, I just needed an alternative…
Print with a color change at a height of 6.3mm. Support is needed on the build plate only. I recommend ironing the topmost surface.
Size : 106 x 106 x 4 mm This ornament is designed to be printed with a single manual filament change. Suggested Top Infill octogram spiral on the clay background color (Z-height 1.0mm) archimedean chords on the silhouette base (1.2mm)…
A gyroid-patterned handgrip for a standard 22.2mm handlebar. I like it. With no perimeters, the infill pattern makes it nice and grippy. Future Plans I intend to make some knife handles based on this design. This would be especially…
Purpose: It’s expensive enough, having to buy a specialized lockpick for each keyway. It’s especially expensive to have to buy separate 5- and 6-pin versions for each keyway. So just buy the 6-pin version, and use this spacer when picking…
NOT YET FLIGHT-TESTED. 6mm thick, and solid. Compared with Lapjoint's ironically one-piece model, this lap-jointed model is 80% thicker. Because I like my boomerangs stiff and not too light. I added four two-dime pockets and some…
This credit-card-size stencil is meant for making lists on paper at least 76mm wide, such as 3-inch square Post-It™ sticky notes. Its line spacing is 7mm, and the openings are optimized for use with a Pilot™ G2-07 pen. If you write with a…
A nineball rack, for either of the following ball sizes: American standard 2¼" (57.15mm) 25mm, as used with Barrington™ tabletop mini pool tables
A guisarme is a medieval pole weapon with a head consisting primarily of a spike for stabbing and a hook for yanking cavaliers off of their horses. This guisarme prop is based on a traditional design, adapted to sort of resemble the one…
This bin is designed for printing in spiral vase mode.
Put the .ini files in the directory where you keep your filament profiles (or ‘presets’ as the kids are now calling them). In Linux: ~/.config/PrusaSlicer/filament In Windows: C:\Users\ [name] \AppData\Roaming\PrusaSlicer\filament In…
This box mounts to the wall with Command™ Picture Hanging Strips, which fit in the channels at the back of the box. It holds four business-size envelopes. Print in spiral vase mode, with 1.2mm perimeter extrusions. See my Fast Print…
Not yet tested, but I figure bridges beat shallow slopes.
There are plenty of other parametric dice available, but this model is special because it’s mine. Pip placement conforms to JackAce’s die schematic . Now if only I could figure out how to make a multicolor 3MF that displays properly in…
This is not another of those test models meant to help you calibrate the Linear Advance for your specific hardware. Rather, it is a bit of simplified G-code which takes standard 0.4mm-nozzle K-factor values and adapts them based on your…
Nike is a goddess also known as Winged Victory. A statue of her was found at the Sanctuary of the Great Gods, along with a pedestal in the shape of a ship's prow. This design is meant to produce a replica of that statue and a replica of…
A small checkerboard for playing 8x8 games like English “draughts” (aka checkers) or the Russian “shashki”. Includes 12 draughtsmen of each color and integrated storage for them. Designed for convenience of transport and of assembly. At…
I use these to cap the handlebar ends of my flat-bar road bike. I make them out of a polycarbonate-polyethylene blend. With a shaft diameter of 17.2mm, they fit snugly inside my Deda Dritto handlebar. I use the standard-length endcap on…
A set of dovetail-jointed compartments to fit within the 192x140x54mm space inside a Disney Store jewelry box. Tolerances are created entirely through the slicer's XY size compensation (aka horizontal expansion ). Adjust that value if…
For permanently disabling the whammy bar of a Stratocaster-style guitar, such as Ibanez™ Gio or a Bexgears ST, conveeting it to a hardtail strat.
I designed a Command™-strip mount for my daughter's lightsaber. The saber itself is just half of a pool noodle, wrapped at one end in three colors of duct tape.
Instructions Print with an outdoor-safe filament, like polycarbonate. Use a coarse gyroid infill and no solid bottom layers. Coat two rods of up to 3mm diameter with epoxy and insert them into the reinforcement channels. I used 3mm…
Instructions Put the .ini files in the directory where you keep your filament profiles (or ‘presets’ as the kids are now calling them). In Linux: ~/.config/PrusaSlicer/filament In Windows: C:\Users\ [name]…
These glorious chessmen are weighted with 10-mm socket-head screws which screw into their bases to give them stability and a satisfying heft. His majesty towers a head above other tournament kings. The threaded bases of all pieces,…
A credit-card-size stencil for drawing flow diagrams in the DeMarco style.
This rack is suited for Heckler & Koch™ G3 magazines, which are used in HK G3-series rifles and carbines – including variants like the HK91 and the American-made PTR. Those two dozen G3 magazines that you’ve got layin‘ around aren’t going…
I’m not quite satisfied with the results that I get from PrusaSlicer’s standard print settings. In particular: The seams are often too visible, especially on flat or convex perimeters. First-layer adhesion is unreliable because of…
My daughter wanted a bookmark depicting snow falling to the ground, so I helped her design this one. It's meant to be printed on a single-extruder printer, with one color change and a lot of ironing.
A larger version of my medieval German Courier Chess Set , printable as two identical interlocking halves on a 270x270mm print bed. This brings it into the historically accurate size range, with 32mm squares. An equally large one -piece…
It can be challenging to mount and dismount a bike when it's on the dynamometer, so here's my solution. It's a pair of steps to mount on the side rails of a set of Tacx™ Galaxia rollers. These steps will allow the rider to mount and…
