Counting matching models…
UPDATE: V2 has been added. This just splits each side into left/right side & left/right clamp. This allows easy attaching and detaching. Other than that it is the same as V1. I haven't tested if having one side V1 and the other side V2…
Kung Fu style grip for HPA Airsoft ARs with V2 Gearbox
M4 Lower for the Airsoft ASG Scorpion Evo. MAKE SURE YOU KNOW WHAT YEAR YOUR EVO WAS PRODUCED. 2018 and newer Evos are a bit different from the older, pre-2018 Evo. If you pull back the bolt and your gearbox has the ASG logo, it is most…
A conversion kit for a Hawsan Airsoft Shotgun, to use APS Shells. Printing: All parts with 100% infill or 1x Shell Extractor 0.1mm (No supports, maybe brim) 2x Valve Pusher 0.1mm (Supports on Buildplate) 2x Chamber Sleeve 0.2mm (Supports…
Replacement Lid for the Odin Speedloader for easy unloading of mags. BB stopper is only necessary to stop bbs from comiing out while transporting the speedloader in a bag Lid might need some sanding at the edges to move freely I printed…
UPDATE: V2 has been added. This just splits each side into left/right side & left/right clamp. This allows easy attaching and detaching. Other than that it is the same as V1. I haven't tested if having one side V1 and the other side V2…
This Grip is designed for the AEG version of the ASG Scorpion Evo. For HPA grips, check my other Evo projects. Make sure you know what you are doing, as you will have to realign the motor with the gearbox and the cable fitment is pretty…
This Grip only works with the HPA version of the ASG Scorpion Evo. For AEG grips, check my other Evo projects. This is designed for Evos that have the Battery in the top compartment. You might be able to fit the battery/fcu wire through…
This Grip is designed for the AEG version of the ASG Scorpion Evo. For HPA grips, check my other Evo projects. Make sure you know what you are doing, as you will have to realign the motor with the gearbox and the cable fitment is pretty…
Be aware that this grip is designed for looks more than ergonomics. Feels comfortable to me, but might be less good on smaller/bigger hands. Also : This grip is just a rounded version of the futuristic grip, but I have not test-printed…
Be aware that this grip is designed for ergonomics for a specific hand size. Feels comfortable to me, but might be less good on smaller/bigger hands. This grip might need some sanding or filing on the insides to properly sit on your…
These designs can be used to extend the new arp9 68rnd mags. The small extends it to around 84 bbs, and the big one to 104 bbs. I didn't test the medium one. You'll need new springs. I just cut up the mag spring of an M4 midcap. I cut the…
MP5 Lower for the Airsoft ASG Scorpion Evo. MAKE SURE YOU KNOW WHAT YEAR YOUR EVO WAS PRODUCED. 2018 and newer Evos are a bit different from the older, pre-2018 Evo. If you pull back the bolt and your gearbox has the ASG logo, it is most…
Be aware that this grip is designed for ergonomics for a specific hand size. Feels comfortable to me, but might be less good on smaller/bigger hands. Also : This grip is just a version of the ergonomic grip with less aggressive finger…
Replacement Lid for the Cheap Winding Speedloader for easy unloading of mags. BB stopper is only necessary to stop bbs from comiing out while transporting the speedloader in a bag Lid might need some sanding at the edges to move freely I…
Be aware that this grip is designed for ergonomics for a specific hand size. Feels comfortable to me, but might be less good on smaller/bigger hands. This grip might need some sanding or filing on the insides to properly sit on your…
Kung Fu style grip Images shamelessly taken from the Jaeger Precision video This Grip only works with the HPA version of the ASG Scorpion Evo. For AEG grips, check my other Evo projects. This is designed for Evos that have the Battery in…
This is printed in one piece, by pausing in the middle of the print, and placing the cardboard dial pieces, before resuming the print. I do this with a color change in the gcode and then just insert the same color again. I recommend…
Be aware that this grip is designed for looks more than ergonomics. Feels comfortable to me, but might be less good on smaller/bigger hands. This grip might need some sanding or filing on the insides to properly sit on your Chiappa Prints…
Selectors and Blanking Plates for the Airsoft ASG Scorpion Evo in the style of magpul selectors
Mlok handguard for the ASG Airsoft Scorpion Evo. There is a regular version, and one for the custom suppressor Pre-2018 and 2018 variants of both MAKE SURE YOU KNOW WHAT YEAR YOUR EVO WAS PRODUCED. 2018 and newer Evos are a bit different…
MWS Nozzle Return-Spring Retention-Piece Pin Punch assist Block
A simple one Piece Muzzle device with a more modern look. Requires a clearance of 30mm diameter and doesn't fit the standard Evo handguard without modifying the handguard.
Custom Mock-Suppressor for the ASG Airsoft Scorpion Evo Has space for a tracer, with different length shells for different Acetech tracers with a max Diameter of 31.8mm It will not fit a regular Evo Handguard and needs a clearance of 37mm…
Arp9 Lower for the Airsoft ASG Scorpion Evo. MAKE SURE YOU KNOW WHAT YEAR YOUR EVO WAS PRODUCED. 2018 and newer Evos are a bit different from the older, pre-2018 Evo. If you pull back the bolt and your gearbox has the ASG logo, it is most…
MTW 9 Buffer tube cap, when you have the battery inside the pistol grip and want to have more space at the stock with a Paintball Mask
A relatively simple Micron style handguard with a rail piece in the front and M-lok on the sides. Three versions. Measure your hand width. Short: 53mm Medium: 63mm Long: 73mm medium is the OG design, the other's are slightly different,…
This is a dummy compensator for the airsoft Mk23 to hide a slightly extended innerbarrel, that sticks out about 35mm Requires an M4 grub screw to lock in place. You should just be able to create the threads for the grub screw, by screwing…
A replacement front cap for the Acetech Lighter R. Only difference between versions is the thread width. V1 is least wide, while V3 is widest. This means that V1 will have a loose fit on the tracer, while V3 will have a tight fit,…
A relatively simple P90 style handguard with a rail piece in the front and M-lok on the sides Re-upload of my design on thingiverse, since I prefer Printables
This Grip only works with the HPA version of the ASG Scorpion Evo. For AEG grips, check my other Evo projects. This is designed for Evos that have the Battery in the top compartment. You might be able to fit the battery/fcu wire through…
Top tubes for the B&T MP5K with a separate cocking tube piece. Replaces the original part and gives more battery space. One with rail and one without. Other than that exactly the same models. Reinforced at the two points where it attaches…
Stripper clip for the KWC desert eagle. Feeds 21 bbs into the mag without removing it from the gun. You only need to print one of the pusher pieces per stripper clip. I recommend the two sided one, but the one sided one works too. You'll…
An integrated suppressor for the Airsoft Chiappa Rhino. One version for tracers (Brighter R or CS) and an empty version for foam. You will need: 2x M3x40 Screws ISO4762 2x M3 nuts 1x Spring that fits around the barrel (Further details…
Quick Speedloader Adapter design. Print as oriented. Should fit most speedloaders
This Grip only works with the HPA version of the ASG Scorpion Evo. For AEG grips, check my other Evo projects. This is designed for Evos that have the Battery in the top compartment. You might be able to fit the battery/fcu wire through…
There wasn't really good way to mount a flashlight on the mk23. I realised that one version of the X300 comes with a plastic mounting piece, that is screwed onto the light. Image source: Evike.com I essentially just replaced that with a…
This is a slim battery cover that will still fit compact batteries, but leave more space for mask users
Acetech Brighter R Tracer Adapter for the Jaeger Precision STFU Mock Suppressor Designed for a 11mm right hand to 14mm adapter that the tracer screws onto
These are all currently available results.
