Counting matching models…
I frequently change between MMU3 use and regular mode use. To avoid swapping tubes between MMU3 and regular use I created a Y-Splitter, which is compatible with the Prusa CORE One and the MMU3 Enclosed version. Since the length of the…
I frequently change between MMU3 use and regular mode use. To avoid swapping tubes between MMU3 and regular use I created a Y-Splitter, which is compatible with the Prusa CORE One and the MMU3 Enclosed version. Since the length of the…
Print instructions: Download the latest PrusaSlicer and use the following settings*: Print settings: 0.20mm STRUCTUAL Filament: PETG (tested on Prusament) 15% Grid infill Additional parts required: 12x Magnets 20x6x2mm or Magnets 20x6x2mm…
Do you know what is hidden in the swallowtail box? This magical box can store gadgets as a surprise gift. Try to disassemble the box. It is quite difficult to take it apart and reassemble it. Size: 75x75x50mm Additional parts required: 1x…
Valentine Gift Box Size: 80x80x80mm (big) or 50x50x50mm (small) Print: 1x Box Bottom_big_rev01 1x Box Lid_big_rev01 1x Heart_big_rev01 and/or 1x Box Bottom_small_rev01 1x Box Lid_small_rev01 1x Heart_small_rev01 Additional parts required:…
I frequently change between MMU3 use and regular mode use. To avoid swapping tubes between MMU3 and regular use I created a Y-Splitter, which is compatible with the Prusa CORE One/+ and the MMU3 Enclosed version. Since the length of the…
A deskstand for Jabra Evolve2 85 wireless headsets. Print settings Material: PLA or PETG Layer height: 0.20 mm Supports: Yes
I frequently change between MMU3 use and regular mode use. To avoid swapping tubes between MMU3 and regular use I created a 3-Way-Splitter, which is compatible with the Prusa CORE One and the MMU3 Lite version. Since the length of the…
Who can find a way to reassemble the six parts to the Devils Knot? Size: 60x60x60mm Print: 2x Devils Knot Part 1 1x Devils Knot Part 2 1x Devils Knot Part 3 1x Devils Knot Part 4 1x Devils Knot Part 5 Print Settings: Material: Prusament…
Business Card Box for Business Cards EU/Standard 85mm x 55mm (3,5" x 2"). Print Settings: Material: Prusament PETG or better Print Settings: 0.2mm STRUCTURAL Infill Fill density: 25% Fill pattern: Gyroid Support material Auto generated…
I frequently change between MMU3 use and regular mode use. To avoid swapping tubes between MMU3 and regular use I created a 3-Way-Splitter, which is compatible with the Prusa CORE One and the MMU3 Lite version. Since the length of the…
Who can knock out an element last? Print: 1x Frame 4x Foot 1x Hammer 1x Dial 1x Arrow 20x Game Piece 1 19 x Game Piece 2 Print Settings: Material: Prusament PLA Print Settings: 0.2mm STRUCTURAL Layers and perimeters Perimeters: 3 Seam…
I frequently change between MMU3 use and regular mode use. To avoid swapping tubes between MMU3 and regular use I created a 3-Way-Splitter, which is compatible with the Prusa CORE One and the MMU3 Lite version. Since the length of the…
The Prusa Original MMU3_C1L_BUFFER_PLATE_R1 was divided in four (4) parts ready to print. Print Settings: Print settings: 0.20mm STRUCTURAL Filament: PETG (tested on Prusament) With supports Print each part 6 times and glue part 1 to 4…
Who can find a way to reassemble the twelve parts to the Victoria's Cross? Size: 60x60x60mm Print: 11x Victoria's Cross Puzzle Part 1 1x Victoria's Cross Puzzle Part 2 Print Settings: Material: Prusament PLA Print Settings: 0.2mm…
While INDX is not (yet) available for Core ONE L, I had to install the MMU3. Due to the fact that there is no buyable Enclosure from Prusa available, I modified the Prusa Original C1L_MMU_ENCLOSURE_R1 and C1L_MMU_holder_R1 to make them…
Math Genius Game - Discover fractions, percentages, and decimals in a playful way. Size of each Frame: 250mm x 210mm x 5mm Print: 1x Frame 1 1x Bar 1 2x Bar 0.5 3x Bar 0.333 4x Bar 0.25 5x Bar 0.2 6x Bar 0.166 7x Bar 0.143 8x Bar 0.125 9x…
Who can find a way to reassemble the three individual parts into a pyramid? Size: 75x75x75mm Print Settings: Material: Prusament PLA Print Settings: 0.2mm STRUCTURAL Layers and perimeters Perimeters: 3 Seam Position: Nearest Infill Enable…
Enclosure for the GPIO "Hackerboard" . Attaches magnetically to the, f. ex. the Core ONE body, for flexible placement. Additional parts required: 1x GPIO “Hackerboard” 4x Brass Insert Nut M3x5 4x Screw DIN 912 M3x10 2x Magnet 2x6x20mm or…
I frequently change between MMU3 use and regular mode use. To avoid swapping tubes between MMU3 and regular use I created a 3-Way-Splitter, which is compatible with the Prusa CORE One and the MMU3 Lite version. Since the length of the…
Description Flyer Stand / Brochure holder 1 to 3 Paper up to A5 size Print Settings: Material: Prusament PLA or better Print Settings: 0.2mm STRUCTURAL no supports
To automatically open and close the Vent Cover on the Prusa CORE One/+ with MMU3, I added a servo which is connected via the Prusa “Hackerboard” to the Prusa CORE One/+. Via a GCODE the Vent Cover can be opened and closed during the…
I frequently change between MMU3 use and regular mode use. To avoid swapping tubes between MMU3 and regular use I created a 3-Way-Splitter, which is compatible with the Prusa CORE One/+ and the MMU3 Lite version. Since the length of the…
Müllex Lid Deckel zu Müllex ZK BOXX 55/60 Bio Zusatzbehälter Art.-Nr. 5081.05
HYLA Vacuum Cleaner to DYSON nozzle adapter to attach f. ex. DYSON Parquet floor nozzle. Additional parts required: 1x Compression Spring 0.4x5x15 (or use the spring from an other disassembled DYSON-Nozzle) Print Settings: Material: HYLA…
Robidog Service Key #7 Print Settings: Material: Prusament PETG or better Print Settings: 0.2mm STRUCTURAL Layers and perimeters Perimeters: 4 Seam Position: Nearest Infill Fill density: 25% Pill pattern: Gyroid
Turn Around Strategy Game for dogs and cats Print: 1x Stand 2x Support 1x Axis 2x Container 1x Lid 1 (or 2x Lid 1) 1x Lid 2 (or 2x Lid 2) 3x Distance piece additional Parts required: 2x Washer 10x20x1.5 2x Retaining Ring DIN471 10mm Print…
Yogurt Lid for 180g yogurt cup Print Settings: Material: Prusament TPU 95A Print Settings: 0.2mm STRUCTURAL Infill Fill densitiy: 100% Fill pattern: Rectilinear
Replacement chimney for the Domek bird feeder house.
Prusa CORE One+ (Gen 2) Purge Bin / Waste Bin with 5x Magnets 20x6x2 Additional parts required: Prusa Set of Magnes 8pcs or 5x Magnets Print Settings: 0.4mm Nozzle Material: Prusament PLA or better Print Settings: 0.2mm STRUCTURAL Support…
These are all currently available results.
