Counting matching models…
I was looking for a tight-fitting cover for my patio USB power outlets. After printing a few and finding none that fit tight and had a handle you could easily grip, I did my own. Two gcodes are offered here; one in PLA on the M3 and…
A screw-on funnel for standard wide mouth glass jars. Print funnel end on build plate, no support needed. Print in PET-G at 0.2mm
I needed a bigger vise on my desk. Couldn't find one so I made this. printed in PET-G except for the pads (TPU). The vise and clamp are separate files as they are quite large. No support was needed for any parts. The jaw is designed to be…
After trying other similar designs, I found it hard to get the thread print clean. This design is done for a extension pole set where the two sections are 31.5 MM and 28.7 MM respectively. It should be scalable to other diameters. The…
Printed here in Overture PET-G on a Bambu X1C. 0.16 layer height 2 walls, snug support for cross and finger groove only. Files are for Prusa Mk4S. .3MF file was generated using the Bambu slicer and should fork for anything. Photo shows…
UPDATE: several ppl said the labels were too deep and left holes. this version corrects that. All .STL files are at 100% size (~41 mm wide) My take on a stackable daily (up to 3 times/ day) pill box system. sections are easily unscrewed…
Printed here in PET-G 0.20 layer height 15% infill 2 perimeters, organic (tree) support for lid
Eliminated the support “leg” as this was not sufficient for PET-G. result is sturdier and a better print. Will print with either PLA or PET-G. I have the FreeCAD file with spreadsheet for anyone who wants the design
This a 2-piece (2 of the same part that can nest) form intended to hold a plastic freezer bag. The bag can then be filled with various foods (soups, chili, pretty much anything) and frozen into a “brick” for easy storage. Two versions are…
After loads of experiments, I came up with a way to print these (print-in-place) hinged boxes for sorting daily pills. The boxes are labeled and use different color filaments. Print is PET-G printed over 1 MM of TPU. Print settings are…
Two types of add-on swivels for my bench vice with desk clamp. Version ‘B' is a simple bayonet that allows easy removal of the vice from the desk clamp so it can be moved around. the ’A' version is also removable, but is pinned in place…
Printed in PET-G. done mostly at 0.3 layer height with 70% (or better) infill for strength. Supports needed for the outside box, sieve and press (organics work well). Assembly is as shown in the photos. Take care putting in the 4 pegs…
A lid for a “Mason” jar that provides a pour spout as well as a opening for a measuring spoon and a leveling edge. Print in PET-G (though I am sure PLA would work as well) at 0.2 layer height. The “base” is printed without support, but…
a direct replacement for the worn out, broken gas cap leash on my 2002 V70. See photo; original part is in black Printed in TPU at 0.2 layer height. no brim or support. Remove the old part by pushing our the two small pins located on the…
Printed here in PET-G
Prints in any material, very strong, center hole can be tapped easily for ¼" screw Serves well as a stand for cameras, sensors or decorative items
A design exercise to make a parametric u Joint. The attached FreeCAD file has a spreadsheet. simply supply the width of the central cross part and the rest will scale. at small sizes, there is no need for support (though a brim is needed)…
A clip for your visor that fits the Chamberlain (liftmaster) garage door remote. 2 sizes here for thick and thin visors Print in PET-G as PLA will likely soften in the heat inside car. Support is required. Sliced versions for both the…
UPDATE: I found the original was less robust than I wanted, this version is better. for extra strength i printed in ABS at .0 layer height and 4 perimeters
It is difficult to get an even slice on these soft buns, so I made this device which holds 4 slider buns (here using the very popular King's Hawaiian rolls) and provides a slot to place a knife at the midpoint of the bun. The device is…
Printed here in PET-G .2 layer, 15% infill no supports. Funnel also fits many popular desiccant boxes for the Bambu AMS
Oxo, made an awesome spatula that was perfect for use with stand mixers (notably KitchenAid), but has since dropped it in favor of a new design which is terrible. The old version is impossible to find (many have tried), so I took on the…
a simple drill guide for standard 3 or 4 inch door and drawer pulls to aide in getting everything square and clean. Printed here in PET-G since it is a tool and may get exposed to heat. I made this for a bathroom installer.
Printed here in PET-G. The 3MF files are for Bambu X1C and will produce flush labels on the box lids. For embossed or debossed labels the STLs for the labels can be added as parts onto the lid or the box STLs in any slicer
These were done expressly for my wife as I could find an opener aide that would fit US standard Orange juice, cream, egg whites, etc sold in cartons with a screw cap. 3 sizes 26, 29 and 40 mm seem the most popular. these aides are small…
This is a design done in FreeCAD 0.21.1 that allows parametric designs of nearly any size substrate and any size drill. Guides now show both metric and inch sizes on the guide Only issue will be the font file for the lettering, this will…
This filament guide works to adaptively overcome spool inertia drag that can stall soft filaments in the extruder. I found this to be the final fix for avoiding extruder jams when using TPU. Prints with support. Take care removing support…
I needed some cable management for the OctoPrint mod I installed. Clearance is tight along the frame, so this little clamp is thin, but still holds nicely. (photos have been “photoshoppped” to show detail, as I printed these in black)
The Standard Tablecraft funnel tends to be too restrictive for some condiments. theses two replacement funnels provide easier flow and have fitted caps for storage. Printed here in Overture Pure white 15% infill with with no support
using only two types of part, a roller squeeze (ala old-time wringer washer). assemble 4 roller parts with 2 braces with M2.5x10 screws. Very cool as a fidget thing as well
For those looking for protection of the the other end
This keeps your brush and brush heads in one place. prints fine at 0.3 layer height, no support
Printed using PET-G but likely will work with PLA, no support needed.
these easily printed 6 parts assemble to make a pill container with a reminder function lid two rotating dials are pinned to a screw top lid. They work as follows 1) the top dial sets the pill frequency (say; every 4 hours) and the second…
Printed in PET-G on High-Z. threads are a bit ratty, but a bit of effort when putting these on solves that.
a collection of picks to mark items on a charcuterie board. I have included several as well as the sliced files to make both cheese and meat selections. The gcode files print at 80% of the size of the STL files and have a filament change…
a 3 color print mimicking the logo. Done here in Hatchbox cool gray, Overture Red, and Hatchbox Pure white. 15% infill 2 perimeters
After looking around an d/l'g several of these things, I wanted something more controllable. This tool uses a standard “Luer Lock” syringe.It features screw threads for both the lead screw and the Luer lock to form a solid fit. Printed…
This is a wall frame for the Walmart ONN 10.1 inch Tablet. Used here to run Home Assistant. The print shown is done in PLA (Polymaker Natural) with .2 layer height, extra perimeters and organic support. Notice the power connector needs a…
Nice little frame. printed here in PLA silk (gold and silver) stand in black. The “front” has plenty of room to emboss or de-boss titling in the Prusa Slicer. Assembly is as shown in the exploded view
Designed for folks that may have trouble with inhaler use. This device captures the inhaler “shot(s)” allowing normal inhale. The device is a chamber with a vortex air inlet and a check valve output that permits easy inhale without…
It occurred to me that there was enough room in these dry boxes to add additional desiccant, so that the only time a re-dry would happen is on a spool change. Not sure if this is true, but we'll find out. Printed here on the Bambu X1C in…
If you use the original base, the USB cable access is very tight. By adding a 3rd flange I raised it so that I had access to all 4 USBs on the RPI4
Containers for relish items on a (Steadware) serving tray. Lids fit under the dishes and are flipped to top as covers. Printed in PET-G at 0.2, these are dishwasher safe on the upper rack. Sliced file for the lids have a filament change…
Based on a photo of the badge on the vehicle. sliced for 3 colors could be printed for either the red stripe or blue variants Added files for EV version of vehicle
Prints easily without support in PLA at 0.3 layer height. Some clean up needed on the overhang of the long oval cutouts. it wors great for holding the standard small “tee shirt” bags available at Costco, etc. The “Hook” is optional and…
simple to print and sturdy enough to hold 10 Lbs or more. I designed it to allow use of dry boxes behind my Mk4S. Printed her in PET-G with support only on curved edges of the hinge areas. 2, "pegs" are required to attach the shelf to the…
scalable button. Example shown and .gcode are 150% of .stl file size. Printed in PLA. The .gcode is 2-up and in 3 colors; base is neutral with a second background color and the recycle arrows in a third). No brim necessary if printed in…
I made these pieces to better connect to rain barrels on my home. They allow standard PVC fittings to connect to standard downspouts. Printed here in PET-G with 4 perimeters
Two versions of this design are shown; the first “Heart” is a PIP with no support featuring a small heat on a pedestal rising in the center of the goblet. the second in two parts - the goblet with a small wedge -shaped well in the center…
Per request, AM and PM lids
Printed here in PETG and sliced for 2-color (no MMU)
I wanted a simple, semi weatherproof camera housing for an RPI/MotionEye camera.this one uses a minimum of fasteners. I made a bulkhead USB to microUSB cable for power, but a a microUSB connector (to mate up with the RPI) will fit easily…
Many hoses come with aluminum fittings. When attaching these to brass hose bids the dissimilar metals cause a cathodic reaction (the aluminum corrodes) that causes the fitting to seize and makes disconnecting the hose difficult. This…
Starting with a photo of the missing piece, I brought the photo into a vector editor (Corel Draw) sized it, traced it, and smoothed the resulting bezier trace. Then exported the file as an SVG to FreeCAD converted to sketch on the Draft…
Using FreeCAD simply put in Name, Address (short, 1 line, like city and zip) phone number and ICE (in Case of Emergency) Number then select either the "blank-Wcut" or the "blank WOcut", each of the "Extrude" text parts and export an an…
Herein are a valve wrench with a coil lanyard and attachment clip as well as a clip-on tank status indicator. All can be printed in PLA without support, but the wrench requires at least 4 perimeters and 40% in-fill (more of both the…
Update 09/23. the original STL and gcode fit the phone too loosly. the current files are a much better fit this is a 3 piece assembly. Body, “CameraRim” and “MagInsert”. The body is TPU, the other parts are PET-G. The Camera Rim provides…
The deck of the in-door ice/water dispenser of my built-in GE monogram refrigerator broke. I replaced it with this, which fits perfectly and is far more rugged than the original. The gray color even resists showing hard water marks.
An improvement that handles the filament better. Printed in both PLA and PET-G (PLA seems better) at 0.1 layer height (brim suggested, but not essential). Photo shows both the original and this version
I developed this as a tool to provided sensor inputs that would drive 4, separate relay outputs from a 30 Vdc PS. It uses a RPI3b, a 5 Vdc buck converter and a quad relay module. It also includes a 2 line LCD display
Designed this for drybox use. it is a feedthrough that allows a 45 degree outlet. Threads for the "10mm" PC4-10M are NOT 10mm standard. (in fact they are BSPT 1/8in, tapered). the threads in this design are 10mm, .91 pitch non-tapered - a…
Modified from the latest heatbed cover (top) from Prusa. place a 6 inch (or so) filament (with some curve to it) into the small hole in the part, then slide the filament into the wire bundle and attach the top to the heatbed. I did this…
Simple hex (close-fit) box with press-on lid for airtag. Works well with most ID tag clips and internal luggage straps. Print in either PET-G or PLA no support needed
Printed here in 3 colors (Red, Gray and White) in PET-G
Need a bit of horizontal space for bubble bath, a razor, scrub, etc while bathing in you freestanding tub? Printed here in PET-G and set to the angle of my tub, the x or y scale could be changed to accommodate other angles. The “clamp”…
Replacement for broken and hard-to -use fan switch operator. Printed here in PET-G @ 0.3 layer height. Remove the front panel and un-snap the existing operator from the slide switch. Some small filing on the case will be needed to fit the…
After printing other racks for my 910MM shelf, I wanted one that had no separators that took up space. This design is strong and fits perfectly to any shelf. (Two end caps are available, one that grabs the shelf end and one that sits…
Printed here in PLA (0.2 (Structural) no support. Install by bending box lid enough to get the pegs to fit into the box lid recesses. its a bit tough to do, but once installed the catch works very well
Printed here in ABS with 4 perimeters and 25% infill. will likely work with other materials as the sections are very thick
This was a real hit at a dinner party the other night. everyone wanted to take their charm home. Printed here in PLA (though I also used PET-G). No support The plane and the clip can be assembled 2 ways
A place to hold the “Color Catcher” sheets used to keep color from bleeding onto lighter colors in the washing machine Printed here in PLA (PolyMaker Pro dark grey and cotton white). .2 layer height box and name plate no support, lid used…
Print with logo facing up and support for key and chip recess
Printed in PET-G on Mk4s using 4 colors. FeeCAD file included
A bespoke grip for the iPhone 14. I designed this for hiking. While there are many "universal" grips out there, the "clamp" style is too bulky and the "MagSafe" style does not hold the phone securely enough. after purchasing this grip :…
Printed here in PLA with 15% infill and no support. support is provided by the small, removable “stalks” with spreaders up the center of the springs. Although the result is still a bit stringy, the device works well in tests supporting up…
a simple platform with holes to fit round toothpicks for a spacer that keeps foil or plastic wrap from sticking to food . NOT FOR USE WHILE BAKING only for storing in refrigerator. PET-G recommended
This is a mount and dust-proof cover for a POE injector mounted in an outdoor area. While the POE injector is no exposed to rain it is subject to dust and humidity. The device used here is the iCreatin Gigabit PoE+ Injector, 30W POE Power…
If you hike, you may use the Cotton Carrier Twist and Lock camera harness or sling. These use a special fitting attached to the tripod mount. While this fitting still has a standard 1/4-20 tripod thread, wouldn't it be easier if the…
slips on to a standard Boost oxygen bottle. keeps it handy when you need a quick "boost" For medium and small bottles with and without a leash. Designed to fit on a carabiner or strap
A ruler using popular amino acids. Ruler is in CM. Printed here in PET-G S - serine - SER E - glutamic acid -GLU C- cysteine - CYS N - asparagine - ASN I - solencine - ILE T - threonine - THR
The riser is printed in PET-G here as it sees little sun (and is quite bulky. I used 5% infill, .16 layer height and 3 perimeters. - no support The drip irrigation clip is printed here in ASA (for UV resistance)25% infill, 0.20 layer…
Printed here in PLA using Overture red and white, generic purple and Justmaker silk bronze. 3MF file is for a Bambu X1C. At 0.2 layer height, there are 4 color changes; begin with purple (slot 1 in an AMS) At 2, Bronze (in slot 4), at 9,…
These are all currently available results.
