Counting matching models…
I always wanted to design a nice looking stackable crate primarily for testing my 3D printer. This crate is designed to be printed without supports by relying on bridging capabilities of filament and printer. Best print settings are 0.2mm…
I always was curious about, whats the best compromise of the original gardena variable jet for maximum water flow, to minimize my time efffort for watering my garden. So i tried many different designs by myself and came to this simplified…
Replacement power outlet (EU type) for Gira System 55. All my original frames, plates and power outlets (white) are breaking after 15 years, so i decided to CAD and print them, adding some design improvements compared to the original.…
Most of the existing designs have all sides rounded, so that you start printing with massive overhangs. This design uses one flat surface without rounded edges to be printable with moderate overhangs. Print it with the back side on the…
This is a simple box for blister plasters from Compeed or other manufacturers. The hinge is designed to get a piece of 1.75mm filament to hold the box and the lid together. Print it with your default settings for your filament type you're…
May i introduce Flossy, the floss holder. I was tired of using long pieces of dental floss to be able to hold it while using. So i designed a easy to print and simple to use dental floss holder, where you can easily wrap around a 10cm…
Intro Welcome! This is a very cute and stable looking travel case for toothbrushes. Your wife or girlfriend will love it! It's printed in place with a hinge. There are two different sizes for download at the moment. S for Dr. Best…
Replacement frames for Gira System 55. You can choose from single outlet to 5x outlet frames. All my original frames and plates (white) are breaking after 15 years, so i decided to CAD and print them, adding some design improvements…
Replacement socker/switch plate for Gira System 55. All my original frames, plates and power outlets (white) are breaking after 15 years, so i decided to CAD and print them, adding some design improvements compared to the original. Print…
Print this lemon press without support. Take food grade filament. I've printed it with PETG, 0,2mm layers and 0,4mm nozzle at 50mm/s. v2 provides larger juice volume and a optimized outlet, less dripping and better juice flow. The dome is…
I wanted a infinity cube, which has complete hinges instead of cones for the joints, which can be printed without infinite overhangs because of the fillets of the joints or edges of the cube. So i designed one on my own. Improvements…
Print this lemon press without support. Take food grade filament. I've printed it with PETG, 0,2mm layers and 0,4mm nozzle at 50mm/s.
I always was curious about, whats the best compromise of the original gardena variable jet for maximum water flow, to minimize my time efffort for watering my garden. So i tried many different designs by myself and after hours of testing…
To prevent the bubble level from getting trashed, which comes with every Ubiquiti Unifi Access Point, i designed this carrier thing for the bubble level to snap in. Print it with the slide-opening looking upwards with your most liked…
If you're also tired of the question “who's glass is this, is it mine?”, this simple marker clips are especially for you! If you have >0,3m of filament and about 1 minute left, you can print one clip. No supports, easy to print. I printed…
Intro Welcome! This is a very cute and stable looking travel case for toothbrushes. It's printed in place with a hinge. Print settings recommendation Layer height: 0.2mm Line width: 0.4mm Cooling: 40-80% Minimum layer time: 5s Speed:…
Description A simple clip for socks to keep them paired for traveling, laundering and drying. This ist the stiffer version with 3mm height Best working slow printed from ASA without cooling . Do not use PLA, because it will deform in the…
For all you 3D printing nerds… This is a 5mm nozzle for your Gardena watering system. If the interrest is big enough i will create different diameters, if you want your water to leave the nozzle with a higher line width. But your water…
This was a proof of concept to design a completely self printed picture frame for hanging on nails or screws on the wall. It has a score on each side to auto align to the nail or screw. Every part needs to be printed 1x exept for the…
After being annoyed long enough by the division of IKEA Glis boxes, i designed inserts for a better organisation of the big compartments. See through the provided models and select your favourite one. If you would like to have another…
A nice looking christmas decoration. You can download the base an top part seperate, or a single solid model. Sample images was printed with 0.6mm nozzle, 0.3mm layer height, white PLA for all but the last complete layer (7). The layer 7…
A simple clip for socks to keep them paired for laundering and drying. Best working slow printed from ASA without cooling . Do not use PLA, because it will deform in the washing machine because of obvious reasons. I lay my used socks…
A coat hook for our wardrobe. It has two holes on the back side for long M5 screws. Our purpose was a large oak plate, where the hooks can be mounted from the back before hanging the oak plate to the wall. A good method for hanging the…
Nice looking cup for Sockstar Sock Clips organization. The clips can be bought at amazon (https://www.amazon.de/Sockstar-Paarungshelfer-Basic-Line-Family/dp/B000NZSRUW) Print with 3 walls, 0.4mm line width and 0.2mm layer height. It…
Super easy to print and beautiful stars to put together. Print each star one time and put them together. I printed these in vase mode to save material. I would appreciate if you post your make in your chosen colors - because i'm curious…
Antler inspired cloth hook with mounting holes on the back for mounting from behind with M5 screws. The screws are just as large for a M5 screw to cut its own thread into the plastic. I printed it succesfully with ASA and PLA lying on the…
A very simple but perfectly working filament sensor designed around the endstops, RatRig sends with their 3D printing kits. You can get this kind of endstops everywhere (https://de.aliexpress.com/item/1005001598848888.html) In- and outlet…
Print it as you like. Choose your model, with or without hole. I print it in 4 minutes with 0.6 nozzle, 0.3 layer height and 40/80mm/s. What time can you achive for a still nice looking tree?
These are all currently available results.
