Counting matching models…
A remix of Sneaks excellent ‘Articulating Raspberry Pi Camera Mount’ -camera housing to suit the new v3 Raspberry Pi camera. The V3 camera has a much bigger sensor and comes with autofocus- quite a big upgrade from the V2 camera. However,…
Update 08/02/2023 - I have added a ‘Wide Angle Camera’ version, the lens has a larger diameter than the standard so will need to be taken into consideration on some designs. I don't have a physical v3 wide camera, and have just gone off…
Printed this for a friend's daughter, who loves both dinosaurs and skulls. This model was a win! Using https://www.printables.com/model/19871-t-rex-skeleton-fixed-and-printable I printed only the skull at 200% but then realised I could do…
Update 22/12/2022 There is a new version of the hinge uploaded that may be easier to print. It is only of the model without the locking latch and it prints open at 90 degrees. It should also be a tighter snap open for the leg. I have not…
My design for a modular E3D Revo nozzle holder. I wanted something that fitted to my printer (PrusaMK3s), wasn't too large, could take at least 3 nozzles and looked a bit funky. UPDATE - This design has been expanded and is now compatible…
UPDATE: 28/01/2023 - I've added a copper coil model and a plate model. No cutout/top/bottom versions of the coil, I expect it will be too fiddley to print. Using TheSameNameTwice 's belt design, I sketched up some Circuits and Gears to…
This is a back massage roller designed to be entirely 3D printed. No additional hardware required! UPDATE: 15th Feb 23 - It's a win! :) Also added a slightly improved wheel print that should spin easier. There are a -lot- of components to…
I originally posted this on Thingiverse back in 2013 after I sketched one up to get me out of a tight spot. See https://www.thingiverse.com/thing:166965 I've slightly amended the design here so it should be a better print. There is a…
This is an updated version of my magnetic filament management system. I have combined two of my previous Prusa accessories so that they now play nicely together (this, and the Revo nozzle holder), and I have included designs here for the…
Somewhere to keep and attach those nozzles that come with bike pumps and compressors. Very handy to use up that last meter of filament too! Two versions to choose from; 3x holes 4x holes The thread of the Schrader valve is very fine - too…
The Oclip Pro is one brilliant EDC torch, but it's keyring attachment location is too fiddly to use. This is a mounting clip that attaches to a keyring, and that perfectly mates with the Oclip Pro's strong rear spring clip. It clips in…
A no-nonsense reusable lid for that half tin of baked beans you have in the fridge. Got fed up of mucking about with cling film. This has to be printed in TPU, but works a treat on the standard tins in the UK. Should fit cans with a…
I wanted to add the official Maghandle to my Onewheel XR (because I’m a sucker for magnets!) but couldn’t justify the price of it. £30 for the handle itself, and another £50 for the bracket needed to fit it to an XR. By the time you add…
I couldn't choose between these two prints to sit on top of the PSU, so I mashed them into one. Also added some holes for hex keys, but they are a little on the tight side.
E3D Revo Nozzle collection, 0.25 - 0.8mm For all your nozzle-holder design needs! I sketched this up for my custom Revo Nozzle holder design: https://www.printables.com/model/299201-revo-nozzle-holder External dims measured for my custom…
A storage solution for 115mm angle grinder disks. Add as many compartments of different lengths as you need to store, organize and protect your disks. Printing I've grouped several of the components together to make it easier to download…
This is a full CAD model of the three main plastic gimbal components of a ‘Miranda Titan 404’ tripod - I believe - it was acquired second hand and had been heavily ‘repaired’! All the three large plastic components (orange, red and yellow…
A drink holster that attaches to garden chairs. It holds pint glasses, cans, wine glasses, and even some cups. I made this a few years back, and they have held up surprisingly well! The clip part and the holder part are printed…
14/05/2023 UPDATE - I’ve added an updated and improved version of this system here: https://www.printables.com/model/465985-magnetic-reverse-bowden-system 23/12/2022 UPDATE Added a STEP file containing some slightly updated components for…
Straightforward print. Includes a hole to leave a bit fitted into the screwdriver handle if you prefer. Make sure you enable tree supports for the two upper Skadis mounting hooks.
This was a quick fix to add a hook to the wife’s new hairdryer, to hang it up when not in use. A (UK) 2 core cable is a tight fit to push in and has never come off. Best fitting method I’ve found is to get the cable just held by the…
This is an add on for the Scribit drawing robot that allows the pens to be fitted and removed in a snap, magnetically. The original Scribit uses a plastic screw and a ‘O’ ring to hold onto the pens, but I was constantly having pens and…
A simple holder for the Fantikk screwdriver set that mounts onto the Ikea Skadis pegboard. Print with tree supports for the Skadis hooks.
This is a model I quickly sketched up when our little one started pulling at the cabinet knobs. The big rounded edges should be a fair bit safer than the edge of the pre-existing knobs in case of falls and head-bumps. There is a slight…
A neat little holster for mounting the Wera Toolcheck Plus to an Ikea Skadis pegboard. This is an improved version with a forward tilt of 5 degrees for easier stowage and removal. PRINTING There are 3 version to choose from; Glued in logo…
This was a quick request by somebody who wanted https://www.printables.com/model/103898-connector-box-for-rpi-csi-cables to match the hexagon pattern RasperryPi - Camera Module 3 case pattern of my remix:…
This is a little gizmo I made to keep in my desk drawer so I always have an easy way to connect wires & circuits to a few different voltages, without faff of crocodile clips, terminals or digging a big power supply out. Very handy for LED…
Just a small bumper for a USB Cable Checker board commonly available from Amazon, Ali Express, eBay, etc. It keeps all metal contacts off your work surface, adds a small buffer to the edge of the PCB and also includes a hanging loop. If…
A simple print to pop on the edge or over the top of a door to prevent it fully closing. Made this to protect a little people's little fingers. It also prevents drafts from clunking doors through the night. The gap in the middle is to…
A low profile, socket-style mount to quickly store standard UK plugs & chargers on an Ikea Skadis pegboard. It keeps a low profile by allowing the earth pin to pass through a Skadis slot. Print plug-face down, and should print as one part…
A mount for the great Omnifixo set for the Ikea Skadis board. There were already a few of these out there, but space is at a premium for me. I designed this one so it mounts the Omnifixo board perpendicular to the Skadis. This means it…
Fit 6x 3x2mm magnets into the reverse of the print - (make sure they match the orientation of the Styrbar!) Release the light switch plate and pass it through the opening. Reattach the light switch to hold everything in place.
A little holster for the Stanley Fatmax Folding Knife. It's a nice drop-in fit, and slightly angled so you can access it without having to leave the area above it on the Skadis clear. Includes additional storage for a few spare blades…
These are all currently available results.
