Counting matching models…
Link to Version 2 of this Rocket: Starship Style Model Rocket v2 This is a printable Starship model rocket designed for use with Estes 1/8" rod launch pads, and Estes C6-3 motors. This rocket is a single stage version of Starship, the…
Print approx. €0.45–€0.56 excl. taxPreliminary estimate for one variant
I love the RTX 3080 Piggy Bank by Nils Kal! I decided to draw new fans that closely match the original 3080 fans. I included STL files, a 3mf file and a gcode file. Share a picture if you print one!
Print approx. €3.03–€3.70 excl. taxPreliminary estimate for one variant
Friendly Valentines Heart - Ferrero Rocher & Baci sizes included. Share a picture if you print one!
Print approx. €2.39–€2.92 excl. taxPreliminary estimate for PETGSource material: PET
I made a Friendly Articulated Tennis Ball Stand. It also works for baseballs, pickleballs and lacrosse balls. Share a picture if you print one!
Print approx. €1.39–€1.70 excl. taxPreliminary estimate for one variant
Friendly Articulated Easter Egg - Ferrero Rocher & Baci. Share a picture if you print one!
Print approx. €1.49–€1.82 excl. taxPreliminary estimate for PETGSource material: PET
This is a model of a GAN cube center cap and logo. I turned it into a wall mount plaque. The STL files are labeled by color. I printed the blue and white parts face down on a texture bed for added detail. The model is 6"x6" but you can…
Print approx. €1.16–€1.41 excl. taxPreliminary estimate for one variant
Great original models by McGybeer and Rayo Da Tomenta . I decided to combine the two models and create a Octopus Hummingbird Feeder. Files include the Octopus Feeder x1, Flower x8, Bee Guard x8, Perch x1, Mount x1. I used epoxy to glue…
Print approx. €0.22–€0.26 excl. taxPreliminary estimate for PETGSource material: PET
I decided to make a mini hummingbird feeder to attempt to get one to land on my finger. Note: I've been having better luck with ABS material for watertight prints. Share a picture if you print one!
Print approx. €0.45–€0.55 excl. taxPreliminary estimate for PETGSource material: PET
Prusament Spool Wind Chime: I thought it would be cool to make a Prusament Spool Wind Chime. It works really well for both contests. I used the Prusa Dummy Spool to make this model. I plan on doing some testing on the tubes to hear the…
Print approx. €0.93–€1.13 excl. taxPreliminary estimate for one variant
Friendly Four Leaf Clover - Ferrero Rocher & Baci sizes included. Share a picture if you print one!
Print approx. €1.08–€1.32 excl. taxPreliminary estimate for one variant
Marble Run - Track & Field - Handheld Fidget Toy Uses Four 6mm Marbles, or Steel Balls, Beads, Airsoft BB's. Pause inserted mid print to place marbles, or snap the marbles in after printing. Color change added for white line details. Use…
Print approx. €3.29–€4.02 excl. taxPreliminary estimate for one variant
This is a handheld hummingbird feeder. I modified my window mount hummingbird feeder and created this model. I thought it would be fun to try and get one to land up close. Note: I've been having better luck with ABS material for…
Print approx. €0.48–€0.59 excl. taxPreliminary estimate for PETGSource material: PET
Marble Run - Race Track - Handheld Fidget Toy Uses Three 6mm Marbles (or as many as you want). You can also use Steel Balls, Beads, Airsoft BB's. Snap the Marbles in after printing. Color change added for white line details. Use glue to…
Print approx. €0.04–€0.05 excl. taxPreliminary estimate for one variant
This is a stand for the Estes Solo model rocket. Since the rocket has asymmetrical fins it doesn't stand on its own. Just flip the glider upside down and rest the rocket on the stand. Also included is a replacement glider ring STL if you…
Print approx. €0.47–€0.57 excl. taxPreliminary estimate for one variant
27 Bead Flexi Fidget Mala v3 - Print in Place - Testing a different hinge design. Print Instructions: Clean print bed, Print test prints first, Layer height 0.15mm, Slow speed 20 mm/s. All adjusted settings are in the 3mf file. After…
Print approx. €1.11–€1.36 excl. taxPreliminary estimate for one variant
Thug Life Glasses & Chain - CORE One Skin A fun and simple skin for the CORE One. I included 1 piece and 2 piece files. Use double sided tape to stick them to the door. Share a picture if you print one!
Print approx. €1.00–€1.23 excl. taxPreliminary estimate for one variant
Prusament Spool Sunflower: For the Prusament Spool Upcycling Contest I thought to make a design that can be adaptable. My idea is a Prusament Spool Sunflower that can be a Wall Mount Clock or an Outdoor Windmill. The Hexagons on the…
Print approx. €0.08–€0.09 excl. taxPreliminary estimate for one variant
Domo Kun - CORE One Skin Domo Kun the friendly Japanese monster. Use Fuzzy Skin for a nice effect. Modifiers included to block Fuzzy Skin on connections. Use glue to assemble the parts. Use double sided tape to attach the teeth to the…
Print approx. €1.93–€2.36 excl. taxPreliminary estimate for one variant
Cupid's Arrow - CORE One Skin Love at first sight, CORE One shot by Cupid's Arrow. Use glue to assemble the parts. Use snips to trim off the fletching bridging wall. Share a picture if you print one!
Print approx. €1.76–€2.15 excl. taxPreliminary estimate for one variant
This is version 2 of my Starship style model rocket. As I'm learning how to design rockets I decided to overhaul the original design. I was working on the two stage version of this rocket but decided to take a step back and rework the…
Great original models by Molodos and Oak . I combined the two models to make a Friendly Articulated Brain with arms and legs. Note: Prints well at 75% if you want to go smaller. Share a picture if you print one!
I really like the bike heartbeat by tgsparky77 on Thingiverse, so I decided to Remix it and make a Swim Bike Run version. There are two sets of STL files included. The first set is the original Heartbeat Remix. The second set incorporates…
I made Thor's Hammer for Lucky 13. I included the STL file, a 3mf file, and a gcode files for the MK3 and Mini. Share a picture if you print one!
This is a printable model rocket for use with Estes 1/8" rod launch pads. This rocket works with Estes C6-3, and C5-3 motors. The model includes the rocket base, motor cap, nose cone, and body tubes. There are two top tube files included,…
I made the Captain America Shield for Lucky 13. I made two versions, a single color version and a multi color version. The multi color version is spilt into sperate parts and then glued together. I included STL files, a 3mf file and gcode…
These are simple US coin tubes to help organize loose change. Store your pennies, nickels, dimes and quarters. The dollar value is marked on the cap. I wanted to try a simple print without using excess material and print time. The walls…
This is an Ironman logo I 3D modeled when I did triathlon. The original prints were done on a Stratasys Dimension 1200. I updated the gcode with Prusa slicer to include color changes. Three options included, 1 color, 2 colors, and 3…
I made a MrBeast 3D logo. The STL files are labeled by color. This was set up as a MMU2s print. Import the Black STL and then right click and add part, select the Blue next, and then the Pink, and then the white. Make sure to tune your…
The Chameleon rocket is a fun model rocket that features a unique thermochromic ABS plastic. The heat generated from the motor will change the color of the rocket during the launch. This rocket was designed and prototyped for use with…
I like the hex LCD dust cover by MrMinion. I decided to make a few adjustments to the hex pattern and the hex knob. I included the STL file, a 3mf file and gcode files for PLA and PET with the color changes. Share a picture if you print…
This is an Oversized Wearable Award Medal that you can Customize with different Medal Inserts. The Medal Chain can be printed in Gold, Silver, or Bronze. The Medal Insert can be printed in different accent colors for 1st, 2nd and 3rd. The…
Balisong Shoe Horn - Print In Place I thought it would be cool to make Balisong Shoe Horn. It reminds me of the fun Balisong comb version. Share a picture if you print one!
This is a two piece 13mm to 18mm motor adapter. It works with Estes 13mm motors, and you can use it in lightweight rockets that use 18mm motors. Print in ABS for better heat resistance and lighter weight. Use a brim when printing. Use a…
This is a picnic table for Chipmunks. Last year I made a picnic table for a chipmunk that visits me during the spring. I decided to update the 3D model and upload it. I included the STL files, the 3mf file, and the gcode files. Parts fit…
I made a 3D New York Rangers Logo. The Blue White STL requires print pauses to change colors. Blue first, then white, then blue, and than white. The Red STL gets printed separately and then glued on. Share a picture if you print one!
Great original model by Whity . After printing the original version I decided to make a small modification. I moved the position of the upper suction cup mounts to allow for better viewing of the birds, and I made all the mounts a little…
This is a spool holder adapter for the Prusa MK3 injection molded spool holder. It allows you to use spools with smaller diameter bores on the Prusa. This prints in 3 separate pieces and then fits together. Add glue during assembly. I…
Great original model by Rayo Da Tomenta . I like the simple design of this feeder so I decided to design a new concave flower and a snap on bee guard. Share a picture if you print one!
Great original model by Luke's 3D . For some reason the original model reminds me of Starship so I redesigned the Body and the Handle to be Starship themed. Supports can be removed with needle nose pliers. No support version also…
This is a custom power switch housing I made for a Mining Rig. I printed the housing and the buttons on a texture powder coated sheet. The backplate was printed on the smooth sheet for the best adhesion. The buttons can be set up as a…
I made a TikTok 3D logo! The STL files are labeled by color. I printed the Black STL face down using the texture powered coated bed. If you print this face down set the bridging angle to 180 or you can use supports. The White, Pink and…
Great original model by M_IDEX . I redesigned the Inception Totem to fit a 45 Record Adapter. It prints in multiple pieces and gets glued together. I printed the Totem at .15mm layer height, seam position rear, and concentric top fill…
Crypto Coasters printed using the MK3s MMU2s face down on a textured powder coated steel sheet. I included the STL files, a 3mf files, and gcode files. The STL files are labeled by color. Share picture if you print one!
This is a Master Spool specifically designed for Push Plastic 500g refill. Push Plastic offers Master Spool refills in PLA, PETG, and ABS. I included angled holes to secure the filament end, but I personally prefer to use filament clips…
My sister loves Ms. Pac-Man so I made her a 3D printed logo. This print is made up of multiple parts to show depth and different textures. Each STL file is labeled by color. I also included STL files labeled Face Down or Face Up depending…
Great original model by Printin' Monkey . I decided to make a Pac-Man Ornament to complete the set. The files are labeled by color. Add a small amount of glue to attach the parts together. Print the small parts slow and let the bed cool…
Great original model by Printin' Monkey . I decided to make a Ms. Pac-Man Ornament to complete the set. The files are labeled by color. Add a small amount of glue to attach the parts together. Print the small parts slow and let the bed…
This is a custom designed display for wrist watches. I originally designed this display for my personal collection of NIXON watches. The original design was laser cut so I decided to re-draw the display so that it could be easily 3D…
Great original model by Printin' Monkey . I decided to make a Vulnerable Ghost Ornament to complete the set. The files are labeled by color. Add a small amount of glue to attach the parts together. Print the small parts slow and let the…
This is a model of a 3D Verified Badge. Why wait to be verified when you can print the badge yourself! Two options included, a standard badge and a wall mount badge. I printed the Blue STL face down on a texture power coated sheet to give…
I made the Giga Texas Cyber Rodeo logo and set it up to be printed on the MK3s MMU2s printer. I included the STL files, the 3mf file and the gcode file. The STL files are labeled by color. Share a picture if you print one!
My brother asked me if I could 3D print him a Tai Chi Ruler. He mentioned the versions you find for sale online don't have the hole passing through the center which is a very important part of the ruler and the practice. I took…
Fourth of July Rockets for Ferrero Rocher & Baci chocolates. Makes a great gift! Share a picture if you print one!
This is a 3D model of Genuine Giraffe from VeeFriends Series 2. The model is made up of a lot of small individual parts that get assembled and glued together. It also includes a mounting hook on the back. The STL files and gcode files are…
This is a window mount hummingbird feeder. I thought it would be fun to see them up close in the window. I also included a picture of the suction cups I used. Note: I've been having better luck with ABS material for watertight prints.…
Touch Grass Light Switch Cover! Gently cut off the bridging wall after printing. Update: I added a second version replacing the bridging wall with another light switch cover. This is so you don't have to throwaway the bridging wall. After…
Orange Slice Drawer Storage! Includes 8 small removable storage drawers. The complete unit is also stackable if you print a second one. Use fuzzy skin for an orange skin texture effect on the outer part. I included a fizzy skin modifier.…
In a effort to design a functional flower and bee guard for my hummingbird feeders I felt bad for the bumblebees so I came up with a fun feeder just for them, a Bumblebee Kiddie Pool. I reused the bee guards from from my hummingbird…
I made an MK3s+ FS Cover with Collet for 4mm PTFE Tube. Share a picture if you print one!
I made a 3D NFT Logo. This model was set up for MMU2s color printing: Place the White NFT STL first and then right click and select add part and then select the Blue NFT STL to orient the parts correctly. I added extra detail to the White…
USA 3D Plaque. The USA Map file requires a color change for the outline to show, I also saved STL files for an MMU setup. The Base requires supports for the map cutout, and the Letters are a simple print. I printed the parts face down on…
Penny Clog Charm! Share a picture if you print one!
This is a dining table set for the sophisticated chipmunk. There are a lot of small pieces that make up this model. I added superglue just to keep everything in place. I have yet to get two chipmunks dining at the same time :) Share a…
I made a Lithophane of Elon Musk the Doge Father. I took a screenshot of Elon in character during one of his Saturday Night Live skits. Next I added the Dogecoin and the Bitcoin in Photoshop. Then I generated the Lithophane and added a…
27 Bead Flexi Fidget Mala - Print in Place Print Instructions: Clean print bed, Print test prints first, Layer height 0.15mm, Slow speed 20 mm/s. All adjusted settings are in the 3mf file. After printing snap each hinge loose and then…
I made 3D logos for the JRNY NFT Club. This is a simple dual color print, just add a pause when slicing. There are four versions of the logo to download, 1a original logo, 1b inverse logo, 2a original logo with a border, 2b inverse logo…
This is a Starship Rocket made to hold 2 Baci chocolates or 2 Ferrero Rocher chocolates. It makes a great gift for SapceX fans. 2 STL Files: Starship_Baci and Starship_Ferrero_Rocher. Print Settings: 0.3mm layer height, 3 perimeter walls,…
27 Bead Flexi Fidget Mala v2 - Print in Place - Easier version to twist the beads loose. Print Instructions: Clean print bed, Print test prints first, Layer height 0.15mm, Slow speed 20 mm/s. All adjusted settings are in the 3mf file.…
Lions Head Badge - Wall Mount. Files set up to be printed on the MMU. Share a picture if you print one!
This is a model of Diamond Hands Hen from VeeFriends Series 2. Some of the parts are oriented face down to be printed on a texture bed. Add some glue during assembly. The STL files are labeled by color. Be careful printing the small…
This is a model of Diamond Hands Hen from VeeFriends Series 1. Some of the parts are oriented face down to be printed on a texture bed. Add some glue during assembly. The STL files are labeled by color. Be careful with the small detail…
Reverse Coin - For Playing Cards Share a picture if you print one!
Elon Musk said he wanted a small trophy for paying the largest personal tax bill in US history. So I made one for him. There are three parts, the cup, the base, and the plaque. Use some glue to attach the parts together. Share a picture…
Articulated Hand - Spinning Battle Top I thought it would be funny to make an articulated hand spinning battle top. A slap battel with two of these tops each with different color hands. Just be careful if any of the hands break loose…
I’ve been listening to Thrice for close to twenty years now. It’s amazing how the band’s sound has evolved over the years. I really like the album artwork on their album Palms. It was designed by Jordan Butcher from Studio Workhorse. More…
As a fan of George Nelson’s design work, I decided to recreate his Vintage Sunburst Clock and turn it into a 3D printing project. Someday I would like to own an original George Nelson clock, but for now I decided to build my own. Parts:…
This model has been updated and reuploaded. The parts have been redesigned to make the clock stronger and incorporate removable spokes. As a fan of George Nelson’s design work, I decided to recreate his Vintage Spindle Clock and turn it…
These are all currently available results.
