All models

Benchmade 62 balisong butterfly knife M3 fasteners

Backup Reverse Camera Cover

A cover for this generic backup camera so it doesn't look as dangly. Affix with double sided tape. The back of this cover is open so it can be installed after the camera. Category: Camera

Wavelength board game thing

Changed some things with the original model to make it easier to use/assemble. lasmaty07 is a gun. The source file is really easy to work with.

Flip knife with frame lock

A fun little knife to fidget with. https://youtu.be/hxRsqbLM88U Print Settings Rafts: No Supports: Yes Infill: 20% Notes: Supports required to prevent frame locker from fusing to rest of frame. Lefties need to mirror all parts (except pin…

DSA Spacebar 6u

kaelruland's original DSA files - https://www.thingiverse.com/thing:2172302

Dwayne Chain

Pause at appropriate layer to join the chain.

Squished Bug Earphone Holder - springy

An earphone cable spool. Uses tension to hold the cable and stop tangles. Very quick and effective to use. Bring the ends of your earphones together so the buds and plug are together. Put the 3 cables through one of the small loops so…

Folding Knife Frame Lock Kizer Begleiter

A design based loosely off Kizer V4458A1 Begleiter. Prints with minimal supports. See a video of it here: https://youtu.be/UfYGvJNmOiw Print Settings Printer Brand: Wanhao Printer: Wanhao Duplicator i3 V2 Rafts: Doesn't Matter Supports:…

Fox 38 Chain Link Storage

I tried to win a jersey but I was robbed.

Quick 10mm deep socket 1/4" drive

Drive with a ¼" socket driver or a ¼" hex bit.

Wavebird artisan keycap for MX style stems

Fine details require SLA printer or 0.2mm FDM nozzle if you're good.

Dental Implant Buddy

Forgot to take a photo of it but it's designed to be easily printable, I promise.

DSA spacebar 6.25u with rounded top

Original file had a flat top. I attempted to round it off for my dainty thumbs so it's more like normal DSA profile. Category: Electronics

Skull Spoke Bead

Please download SKull_Bead.stl by Tony_D to play around with the scad file. Category: Sport & Outdoors

Thumbs Up Bicycle Spoke Bead

Yes Category: Sport & Outdoors

Approximate Tamagotchi Model

Approximation of a Tamagotchi shape based on photos and rough measurements.

Wakizashi 40 Keyboard

Required parts M3 12mm x 6 M3 16mm x 6 M3 nut x 12 Microcontroller e.g. Arduino Pro Micro, Teensy2.0… (Optional) USB breakout board to glue to the case 45 x keyswitch 2 x 2u plate mount Cherry stabiliser 45 x diodes e.g. 1N4148 Printing…

Case for seeed studio SenseCAP Card Tracker T1000-E

use m3 heat set insert (5mm OD, 3mm length) and 6mm m3 bolt OR just use zip ties in the corners 🤷

Simple Parametric Allen Hex Key Holder

Simple allen key holder. Edit in OpenSCAD or Customizer to specify the sizes you want. The included STL has holes for 1.5, 2, 2.5, 3 and 4. Some additional things you can change in the SCAD file: Comment out the hull() function to give…

3dp fc660 v3 OLED hand wired mechanical keyboard

This is a hand wired keyboard. Please be familiar with the process of hand wiring before undertaking this project. Inspiration for this project comes from this hero . Features 5° typing angle Low profile front height Supported layouts:…

Side load bottle cage for 375mL can

Side loading bottle cage for 375 mL cans. Perfect for a mid-ride beer. Need a bottle cage in different size? Check out my parameterised version here! Category: Sport & Outdoors

Wavelength Pocket Board Game Thing

Required hardware: 3x M3 6mm bolt 1x M3 nyloc nut 2x M3 nut Print instructions: Print all the segment files without removing them or moving the build plate. If you are using a skirt, make sure it is sufficiently far from the object so…

Canyon Spectral main pivot bolt cap

Replacement for main pivot bolt cap. Needed this when my main pivot bolt worked its way loose and punched open the original. Print Settings Supports: Yes Category: Replacement Parts

Grenade Spoke Bead

Spokey doke in the shape of a grenade. Sink the model into the build plate if you think you might have trouble with adhesion. If you want to play with the SCAD file, you will need to download the original stl from which this is remixed .…

24mm wrench

Needed a spanner to tighten the nuts on my induction sensor. Category: Hand Tools

Clueboard / FC660m 66% Mechanical Keyboard v2

Before you print 3dp fc660 v3 OLED hand wired mechanical keyboard Here's a more recent version of this keyboard with optional OLED support. Printing Before printing, make sure to orient the pieces correctly. Flip the plate pieces upside…

Ortholinear Mechanical Keyboard 14u

Try your hand at an ortholinear layout without worrying too much about using too many layers like you would on smaller ortho boards. See github for more details: https://github.com/xia0/keeb_files/tree/main/3dortho14u See KLE for possible…

DSA Stepped CapsLock

Why can't I buy one??

Fake Kishsaver 3d Printed Mechanical Keyboard

A mechanical keyboard case imitating the appearance of an IBM Kishsaver keyboard. Features a 5 degree typing angle and tofu68 style layout. This model requires you to print tall for the case - make sure your Z-steps are calibrated…

cmh's tire lever but easier to print

Found the round overhang at the back of cmh's version difficult to manage. This one lays flat on the print surface. Also has a 10 mm wrench which might be useful for single speed chain tensioners. Category: Hand Tools

Stackable Beer Crate for GBA and GB/GBC Cartridges

Slight modification of the AAA tray to hold GBA cartridges. It doesn't quite fit 5 so this one will hold 4 cartridges. It would probably be too hard to take the cartridges out if they were jammed in there. Update: Added a model to hold…

Subaru XV fuse box cover

Cover for Subaru XV cabin fuse box. Fits on my 2013, not sure about newer models. Useful to punch holes in and mount switches. Also has slots to store spare fuses. Print Settings Supports: Yes How I Designed This Designed in Fusion 360.…

Binder Clip Wallet - Very slim and secure

A very simple and slim wallet to keep your cards and cash together. Print two. Post-Printing Print 2 and use a 25mm binder clip to hold the pieces together. Category: Accessories

CRKT M21-10KSF replica frame lock

Stabbing time Print Settings Printer Brand: Wanhao Printer: Wanhao Duplicator i3 V2 Supports: Yes Notes: Frame requires supports. Best to print the frame in ABS so the frame lock doesn't lose its springiness. For the blade, print one…

Soarer's converter case for AT/XT to arduino pro micro

This is a case to house a panel mount DIN socket and an arduino pro micro. Its intended use is to hold a Soarer's converter for an AT/XT keyboard. Required hardware: 2x M3 nut 2x 50 mm M3 bolt 1x arduino pro micro (ATmega 32U4) 1x panel…

Dipstick wrench for Suzuki DR-Z 400

Over time, the plastic of these dipsticks swell up or something 'cause they become impossible to turn without pliers. Well, I lost my pliers…

Snowboard bottle cage adapter

Mount a bottle cage to your snowboard. Only works if you have exposed binding mounting holes. Need a bottle cage? Here's one for a can of beer Or a parameterised one for a bicycle drink bottle Requires M6 bolts to mount to your snowboard.…

LM2596 DC-DC buck converter case

a simple case that can be assembled even after soldering. use m3 plastic screws ideally. there's enough room to tie a knot at the end for strain relief.

SUP board nut

Insert M4 nut to make a replacement nut/plate for a SUP board fin. Category: Sport & Outdoors

IBM Model M USB Mini-B breakout mount

Snugly mount a Mini-B breakout PCB with room to solder 90 degree header pins. Specs for the breakout PCB: Hole to hole: 16 mm PCB size: 20 mm x 18 mm approx Use 6 mm M3 bolts and nuts to fasten PCB to the print. Print Settings Printer…

Wanhao Duplicator i3 camera mount for Raspberry Pi

Mounts to the screws that hold the rods. You do not need longer M3 bolts but wouldn't hurt to replace the M3x6mm bolts with M3x8mm if you have them handy. You will need M2 hardware to attach the camera to the print. Before printing,…

Compact screwdriver with bit eject button

Needed a screwdriver for snowboarding that wouldn't impale me if I had a fall. This one holds the 6.35mm bit driver and a bit. It holds the bit quite firmly. To get the bit out, just depress the button on the end with your thumb and eject…

Hex Spanner Wrench Fidget Spinner - Customisable

The included STL has holes for 8mm, 10mm and 12mm. Edit in Customizer or OpenSCAD to change to the sizes you need. You can have more than 3 holes - just keep adding to the array. The position of the holes are calculated to ensure the…

Yakima Holdup 2 Licence plate and lights mount

There's no obvious location to attach a licence plate or lights to the Yakima Holdup 2. This adds some holes to mount stuff to. 2x M8 nuts and 2x M6 nuts required. The nut holders go behind the bottle opener. f3d files included for you to…

Snatchpad mechanical keyboard macropad

Natures Head 28mm fan adapter

40x40x28 fan fits snugly in the stock Natures Head fan housing. This adapter holdings the fan in place and does not require any additional hardware to mount. Simply rewire the new fan; remove the existing fan, plastic screws and…

Headless Facepalm Picard

Facepalm whoever you like. Category: Sculptures

Snowboard Binding Strap Lock Cryptex

Locks onto snowboard bindings to prevent them from being undone. Replaces the USB part in USB Flash Drive Cryptex v2 . Won't stop a determined thief but will stop someone from picking up your board and walking off with it. Print Settings…

Adapter for RepRapDiscount Full Graphic Smart Controller to Wanhao Duplicator i3 Control Box

Other required parts: 4 x M3*3 mm heat set inserts. Feel free to modify for hex nuts - source file is included 4 x 12 mm M3 bolts 4 x 1.8 mm M3 spacers between the PCBs 4 x ≈2-3 mm M3 spacers between the adapter bracket and the PCB…

Wanhao i3 Backplate with Dual 50mm fans (M3, non-countersunk holes)

Modified so the holes are not countersunk. Category: 3D Printer Parts

sd card holder for ring binder album

f3d file included. converted mesh of individual sd slot in source.

Voltage regulator 40mm fan mount for The Bitaxe Minimalist Stand

My Bitaxe came with a version of this Bitaxe Minimalist Stand stand and I didn't want to print a whole new stand just to mount a fan. This bracket is a quick and easy way to mount a 40 mm fan. A great way to repurpose the original fan…

Suzuki DR-Z 400 E Pillion Footpegs

The DR-Z E model subframe annoyingly does not have mounting points for passenger footpegs. This model aims to correct that by using existing parts on the bike to mount 3D printed footpegs. No modification to the bike is required other…