Counting matching models…
Double-ended Male/Female Luer Lock Cap. In the image the red parts are printed in FDM while the blue ones are the original injection-molded part. Fully 3D-printable in FDM in both orientations, no supports required. Optimized for a 0.4…
Universal Door Sliding Sign A simple frame with sliding pane to select between two large 5x5cm signs. The signage is just a simple sheet of paper and can be exchanged from above. The template (to be printed and cut-out) is also included…
Simple/robust card holder for credit-card sized badges which includes a customizable text section. Click "Open in Customizer" to personalize it, or use OpenSCAD directly. This is a further evolution of my own Single/double ID Card holder…
Simple/robust card holder for two credit-card sized badges. We use those in our biology lab to open doors and fridges. They are sturdy, hold the card securely and allow the card to be swapped very easily. The small gap between the two…
Soldering Helping hands, re-re-remixed A further evolution of the re-remix , based on this , inspired by this which originated from this . Phew.. Third-hand designed to solder wires and/or component leads , featuring: Adjustable distance…
Another take on the piston-keychain with a movable connecting rod. Designed to maximize quality at small size and reduce printing time. Only two parts: cylinder head and connecting rod. No glue/screws/pin required: the rod has to be…
You know what Thingiverse really needs? Another spool holder! TUSH FT: FatTracks Edition TUSH-style spool rollers are great if you lay filament on a flat surface: Very compact and lightweight Universal (no adjustment needed) and quick to…
A minimal tape dispenser/roller for Scotch tape (for rolls with an internal diameter of 25mm, external diameter up to 55mm). Uses a piace of blade cut from a cling-film (or other kitchenware) roll, cut to a length of 20mm. Can be used…
Complete set of generic toilet seat hinges, including left/right hinge, nut and bolt, optimized for printing. I could only find replacements that didn't fit my old seat, or didn't fit the existing parts, so I made a complete set.…
Designed for laptops 14" or smaller, this brings the display to eye level. Also works nicely for desk-side tablet viewing. Maximum thickness for the base is 15mm. Obviously needs a laptop with a display hinge that can open wide (like most…
Simple/robust card holder for credit-card sized badges in regular and "double card" versions. This is another remix of the great card holder by Jori which prints without supports. These badge holders are the most requested/printed thing…
This might not be the deity we wanted or needed, but it's the one we deserve --- Seriously though, this is a small tweak to the fantastic model Dr. Slump pink poo by @tincat , and it bears absolutely no reference to any physical or…
Rework of the original Y idler by gregsaun of the MK3 Bear full upgrade to include a belt tensioning mechanism. For a version using a toothed 20T 5ID Gates idler, look at this remix . Print instructions This is compatible with the Bear…
Minimal laundry-rack raiser for vacuum robots. Fits racks with 16mm tubing. Snap-fit without play. Wide footing. Still allows the rack to fold completely. Raises the rack by 20mm, just enough to trigger the front bumper of most vacuum…
Super-simple, minimal bumper for ST Nucleo F4* / Nucleo 64 MB1136 boards.
Replacement male side-release buckle for Quechua/Decathlon backpacks with a 40mm belt. This specific buckle was found on a “Quechua Bionassay 22” backpack, but will likely fit several other backpacks using the same design. The code on the…
A simple tray for weighting coffee beans. Optimized for 18g of beans: no overlap when leveled, which is ideal for “spritzing” them with water before pouring them in the grinder. Optimized for a 0.4 nozzle.
A simple wall-mounted remote holder for Epson projectors fitting multiple models of their remote. It can be taped or screwed to the wall. Print vertical, no supports required. Update 2019-02-06 Updated the model to fit more snugly newer…
Fancy 30° stand for the Roland MC-101. Inspired by the Roland MC-101 Compact Stand , but made lighter and with fancy ventilation holes on the platform. Can be printed vertical (as given) without supports with some minor scarring on the…
Clamp for a 30mm tube. Uses a single 20mm M5 screw (hex head) with a butterfly nut. The clamp is tall enough so that the nut can be fully turned even when the clamp is flush against another object. Print preferably in PET or ABS. Don't be…
Prusa MK3 Y Carriage bearing holder A LM8 bearing holder which replaces the original U bolts under the Y carriage. A refined version based on LM8 Bearing holder MK3 (which is turn based on the Prusa i3 Bear Bearing Holders ) which has…
A magnetic separation rack for four 1.5ml vials, optimized for a pipetting volume of 200µl and greater. See the remixes for a 12x version with faster separation. This replaces quite well some comically-expensive separation racks that go…
Those pesky exercise balls like to roll around as soon as you look away... No more! with this keeper. The ball has no chance to escape! Builds out of 6 snap-in pieces (3x supports and 3x walls) The walls come in two variants: 100cm: for a…
A simple pipetting aid fitting most 384 PCR or standard 96 well plates. Place on top of a plate and push down to lock in place. Slide the horizontal or vertical rulers to track progress and avoid mistakes. Print as given, using 0.2mm…
A Timemore Chestnut C2 attachment that provides a way to store the handle vertically alongside the grinder while also providing dust protection for the funnel. Should likely work on the C3 (please confirm with a comment). For a perfect…
A rack for 35mm petri dish containers for convenient organization and archival. Originally designed to hold 35mm Ibidi dishes. Each rack fits 30 dishes (5 for each column). Racks can also be stacked on top of each other. A single rack…
50cc of bearing grease, stat! LM8U/LM8UU greasing helper which fits a regular syringe. Great if your grease sits in a can and not in a squishy tube ;). Align the slits with the bearing tracks before injection. Print Settings Resolution:…
Wall-mount shelf for a kitchen's sponge, soap or other wetware that drains directly into the sink. This was tailored to my sink, which is mounted pretty close to the wall. Oh, and it's full of those sweet, sweet hexagons. Wall-to-drain…
A rudimentary smartphone mount for a micro/stereoscope. The clamp is designed for an ocular with an outer diameter of 31-34mm. After seeing several microscope smartphone mounts I simply wanted to try without commitment (that is, least…
A simple tripod mount for the Qumox/SJCAM/SJ4000 (and possibly other clones). The camera snaps into the support tightly. The mount has a threaded hole for a tripod screw. The camera can be mounted in both directions (facing the clamps or…
A 1Zpresso K-Max attachment that provides a way to store the handle vertically alongside the grinder while also providing dust protection for the funnel. Should likely work on the related 1Zpresso line-up (K-Plus, K-Ultra; please confirm…
The Gyroid partitions the space into two unconnected, infinite subspaces, which is what we can see here printed in two colors. We're effectively looking at the empty space as opposed to what is normally printed as infill (with a generous…
Rework of the original Y idler by gregsaun for the MK3 Bear 2.0 full upgrade with a belt tensioning and tracking mechanism which uses a Gates 20T 5ID toothed idler. For a version using the stock 20T 3ID smooth idler, look at my previous…
A simple bird feeder designed for small birds, to be attached to a flat surface such as the outer side of a window. Comes in two parts: an easily removable bowl (so that it can be cleaned or changed easily) and an attachment that needs to…
A simple container for “sport tape" (or any other tape) in 10/25/40mm width, as used for climbing and other sport activities. This is to avoid dirt immediately sticking to the sides of the tape when carrying it around. Threaded cap that…
Dead-simple battery tester for CR20?? coin-button batteries. Provides a light load to test the battery. Bright led = good. The little prongs sticking in the front can be used with crocodile clamps attached to a voltmeter in order to test…
Let your Raspberry Pi 4 Get Perpendicular! Improves passive cooling, especially when using additional shields. The wider front bracket avoids tip-over when plugging cables, however they're fully interchangeable: two small brackets can…
Simple Floatwheel Adv/Adv pro charging plug to avoid debris in the port. Designed/tested for TPU 98A, 0.4 nozzle, 0.2 layer height. No supports required. Should likely work with PETG, but untested. You might be interested in deeper…
A sleek, minimalist inverted salt shaker heavily inspired by Modern designer inverted salt and pepper shaker by ByronFrench. This design immediately caught my attention due to the single central big round hole which is less susceptible to…
Just a minor tweak to the great low polygon cat so that I could print it in spiral mode. When printed in clear PETG, 0.1mm layers and spiral mode it becomes both shiny and translucent. The left ear has small gaps though, it's still not…
An alternative version of the Floatwheel Adv/Adv pro charging plug to avoid debris and finer dust in the port. This version goes all the way in, touching the control box and entering the charging socket for a better seal. Designed/tested…
Fancy soap/shelf for 17.7-18mm shower tubes (as used by Grohe). No supports required. Print preferably in PETG. Can be customized for different shower tube diameters by scaling in percentage as follows: scale = diameter / 17.7 * 100
Re-remixed third hand for soldering wires This version has an adjustable distance between the clamps, as well as some internal weights inside the base in order to hold everything steady. The weight makes a big difference! The base uses…
Tweaked version of the Cat Phone Supporter to hold an IPhone 5. Not the most stable design (couldn't hold anything vertically in the original), however it wins on cuteness alone. Stretch on Z as desired. Might hold other mobiles, however…
Ergonomic snacking tongs, now coming with that extra gripping performance you always needed for those M&Ms, peanuts and more™. Remodeled from Snack Gripper - ergonomic snacking tongs/sticks which was absolutely excellent. Kudos! Use the…
This is a simple remix of the DNA playset by emmett with looser joints for those that have trouble printing the original. Includes the stl files as well as the modified scad. To cite the original source: «... This is an accurate…
A simple support to hold an avocado seed at water level for sprouting. Narrow enough to fit in a thin jar (anywhere an avocado seed would fit). Outer diameter is 4cm (~1.6in). Print instructions Print upside-down, as given. No supports…
A remixed "Worms 3D" model by LesDeuxDuFond which improves printability. The base has been flattened, overhangs reduced and scaling adjusted to metric units. Can be printed as-is without supports. Category: Creatures
Customizable Air Trimmer Suitable for holes starting at 30mm. I've used this design to regulate the airflow of a 3d printer enclosure. Perfectly circular holes are easy to make using a cheap hole saw set. The aperture with this design is…
A simple 3x3 tray to carry 35mm Petri/Ibidi dishes conveniently.
A fancy hiking stick wall mount with (optional) hidden screws. This is designed to keep the sticks away from the wall as to avoid scraping even with the winter/snow attachment. Comes with 3 pieces: base with hidden M4 countersunk screw…
Rework of the original Y idler by gregsaun for the MK3 Bear 2.0 full upgrade with a belt tensioning and tracking mechanism which uses a Gates 20T 5ID toothed idler with a 5x30mm dowel pin. The 5mm dowel pin and the design of this idler…
A simple Eppendorf container and/or light shield with cap, fitting 3x 0.5/1.5/2.0ml tubes. Optimized for a 0.4mm nozzle.
Small round hooks with a long handle (80mm from tip to center). Two versions: hook_2id.stl : 2mm internal diameter (smaller one) hook_5id.stl : 5mm internal diameter (larger one) Optimized for a 0.4 nozzle and 0.2 layer height.
Centerpiece for a dipole antenna, 5mm coax cable (RG-58) and various rod sizes (4,5,6mm). There is plenty of space inside for the wiring. The generous size also makes it pretty sturdy and has no problems to support long/heavy poles (2-3…
Wall brackets for 100mm spiral tubes. Designed to “hug” the space in-between spirals and flex as required to follow tight bends in either direction. Allows the tube to be adjusted as required without binding it permanently. Two different…
A simple German remix for the “Attack Cat” warning signs . I took the cat mesh from “Hunting cat” and redesigned the rest. Fills an MK3 sheet almost completely. If scaling down, reduce XY only (leave Z unchanged for the correct effect).…
Y belt holder compatible with all full Bear upgrade versions (2.0/2.1) when using one of the following custom y idlers: Tensioner with 20T 5ID Gates toothed pulley + dowel pin Tensioner with 20T 5ID Gates toothed pulley + M5 screw…
An enclosure/battery holder for the GM328 transistor tester. The box has a simple hinge that holds the battery in place under the tester, while leaving the board surface perfectly flush on the enclosure's rounded edge. This leaves all the…
Replacement gasket for the Titan extruder in order to use a PC4-M6 fitting instead of the original PC4-M10. Snug fit, self-tapping. Only tested on a Tevo knockoff.
Keep your enclosure's temperature optimal using this (manual) air trimmer. Designed for a 64mm bore (press-fit). I placed two holes in the enclosure: one directly under the build plate (to avoid side drafts) and one on the side near the…
Running out of walls here, so I started using shelf ceilings. Here's an universal screwdriver holder based on a 6mm U profile. It can be of any length and support screwdrivers of any size thanks to the freely re-positionable snap-on bits.…
Improved magnetic separation rack for 12x 1.5ml vials, optimized for a pipetting volume of 200µl and greater. This version holds 12x vials, with bigger magnets and shorter distance to the vial, making the separation faster. Requires 6x…
Transform this cheap "support for mobile phone repair" that you can find everywhere into an amazing little vise just by swapping the crappy metal clamps. With these improved clamps you can now hold almost any small PCB with components on…
Vertical stand for a MacBook Pro 15" from 2009-2010. Very stable, slides in without play. Two copies needed for a complete stand. Print preferably flat for a smoother finish.
Dosing funnel explicitly designed for the 9barista, although should fit other machines having a 53mm basket. Allows dumping the coffee grounds into the basket more easily without making a mess. Intentionally very steep. Contrarily to some…
This adapter fits both the catch cup of the 1zpresso K-Max/J-Max and the rim of the 9barista (or any other 53mm coffee basket). This allows for a very convenient and clean way to move the grounds from the K-Max to the 9barista: place the…
We're using two of these large hooks to hold open the bag of dirty coats inside a cabinet chute. The middle hook prevents the bag falling off when coats are thrown inside. Fix using glue or strong double-sided tape. Print base-down, no…
Bottom cover for the ICOM IC-A20 for use without a battery. Two versions provided: ica20-cap-supports.stl : version with hand-crafted supports ica20-cap-nosupp.stl : no built-in supports The cap slides and clicks without play. Use a 0.4…
An internal sleeve for the Floatwheel Adv/Adv pro power button to avoid debris entering the board from the small gap between the rail and internal controller box. Requires a flexible material: designed/tested for TPU 98A. Almost invisible…
When "Ultimate" just doesn't cut it anymore, enter the... De-Luxe Eppendorf pipette holder Height-and-tilt adjustable Eppendorf pipette holder for wall or under-the-shelf mount. The patent-pending™ Quick-Draw© holster allows to insert and…
IFlight XL5 BN-880 GPS holder An absolutely minimal mount that wraps around the GPS pcb and is being held by the two rear bolts. Print at 0.2 layers, 0.4 nozzle using PETG or TPU96+. After printing open the arms of the support and insert…
Drying stand for the middle section of the 9barista, so that it can be kept vertical. With a fancy shape, because why not.
3TSS: 30mm Tube Spool System This is a complete solution to convert a regular 30mm tube into a horizontal/vertical (suspended!) spool holder for one or more rolls. It includes: Fixed spool hub adapter Axial bearing spool adapter using 6mm…
Continuing on the tradition of the “probably” over-engineered remix series, this is a modified sheet holder optimized for horizontal size. Fits two steel sheets side-by-side with a central eject button mechanism, fitting in just 56cm…
If you remember this scene: Well, that's the best I could do after about 15 minutes: Materials and Assembly The Hattori Hanzo™ knife bar is actually super-simple to make. Fits on most print beds printed diagonally without supports and can…
An adapter ring to fix the attachment of various accessories on a Technostar HD 2000 hair dryer. The teeth on all the bundled accessories of this hair dryer are prone to failure. They either get scraped (failing to snap in place after…
This is a remix of the awesome Radial Fan Fang modified to be easier to print in ABS. It fits a Tevo Tarantula with the stock carriage using a 4020 radial fan, with or without a BLTouch. The Radial Fan Fang is hands-down the most…
Title speaks for itself. You know the real problem here? The design of this device. How are you supposed to "use" it? Laying on a table? Nope.. it's round on all sides: front, back, top and bottom: it keeps rocking about. A wobbly…
This is a tweaked version of the excellent MK3 Nozzle RHD Rev. C by RH_Dreambox fitted for the stock MK3S extruder and optimized for FDM slicing with PrusaSlicer/Slic3r. Besides offering superior part cooling (esp. for low airflow), it…
Small and long hexagonal 5.5 angled hex wrench/spanner. Designed explicitly to adjust the U bolts under the MK2S/MK3 Prusa bed. Printed with PLA with 5 perimeters, the key more than strong enough to do the job (the bolts shouldn't be…
Replacement IKEA Vilmar seat connector piece (id 123663) Functionally equivalent (seat distance and stacking capabilities unchanged). Optimized for printing: use the provided orientation, 4 perimeters, no supports required. PLA is…
Replacement feet for the Sony TA F222ES stereo amplifier (and probably similar series). Adding an additional 1mm (±0.1mm) adhesive rubber pad at the bottom is advisable. Vertical spacing is identical to the original once the pad is added.…
Suspended underside shelf for two Remarkable tablets, or any other generic tablet with a maximum thickness of 8mm and side length of 21cm. When used with the Remarkable, it's designed to fit 1/2/Pro even when mixed (as shown). Recommended…
A simple holder for the Vacusafe "wand" to be fixed to a vertical surface (such as the external side of the hood). The wand slides nicely from above and is held securely. Note: the holder is not symmetrical (it won't lock as tight when…
TP Cows! These cute cows can be made with an empty toilet paper roll and some flashy colors :) Printing instructions Print at 0.2 layer height for best results Assembly instructions Start with an empty toilet paper roll and the printed…
An "Emergency Stop" button sign. Change the filament color for the top layers to get the proper effect.
A light shield for a Corning 500mL EasyGrip bottle. The cap position allows easy one-handed operation. Print in black with at least 3 perimeters for good shielding.
Dual-sided and multi-color Ice-cream for your hair! Can be scaled down to 70% if needed (the original size is pretty flamboyant )
Light shield designed explicitly to fit a Nikon Eclipse Ti2, attaching directly to the lens barrel. Contrarily to the original "light shield", this accessory blocks light coming from all sides, allowing operation in a fully lit…
Printable 2-part 9barista basket cap mold. Allows making a suitable silicone replacement for the custom basket cap used by the 9barista. Not cost effective, but definitely satisfying ;) Optimized for a 0.4mm nozzle, 0.15 layer height. Use…
A handy cap to avoid beans jumping out while grinding. Check your grinder first: this is for a cup with an outer diameter of 92mm. Print instructions Print the two parts as given (no supports required). PETG with 0.4 nozzle, 0.2 layer…
Remixed front-facing Z end-stop from RC-3D for the Tevo Tarantula. The switch holder is exactly the same (included here for convenience). The remixed screw-holder has the following changes compared to the original: Uses two M3 20mm screws…
An absolutely bonkers vertical (aka "portrait") laptop stand designed for the 14" Dell Latitude 7410 laptop. It keeps the laptop at eye level, resulting in a second screen whose position and height is comparable to the vertical side of a…
A no-bs handle to get better leverage when pulling the stator off/on the CannonCore motor.
A simple cap for a standard petri dish. In this case it was printed in black to act as a light shield. Category: Biology
A light shield for a STEMCELL 500mL bottle (mTeSR 1 Basal Medium & others). The cap position allows easy one-handed operation. Print in black with at least 3 perimeters for good shielding.
This is a very compact transport container for 6x 15mL falcon/corning tubes that doubles as a temporary light shield for use under the hood, replacing the dreaded tin foil. Optimized for a 0.4mm nozzle, 0.2mm layers. Print in black with…
