Counting matching models…
Designed this to replace a cap from one of my 5 gallon blue water bottles. It's 57mm OD by 11mm tall. How I Designed This Design notes You can design your own pretty easy. Use Fusion 360 to create a cylinder of the appropriate size, drop…
Made this for larger prints and added a few holes to hook into a small nail or photo hanger. Should fit an 8 by 10" photo perfectly if your printer prints to size accurately. You can measure after the first layer goes down if you're…
A pull knob for accordion closet doors, cabinets, drawers, etc. It's designed to be fixed from the other side by a #6 screw, such as a long enough drywall or construction screw. Prints pretty easy on a sticky build surface. Recommend you…
Updated Oct 26, 2021 - Completely redesigned from scratch to be more durable, retain its sheeting effect for a greater distance, and have a better fitting connector for NPT 1/2" shower connectors used in the US. Folks not using that…
I have produced this design by trying lots of ideas and printing a lot of imperfect baseboards for my bathrooms. By the time the model here was refined, the prints were coming across very reliably good. I recommend priming and painting…
This version is modified to be built on its side, with supports. A small amount of material was removed to ensure it lies flat. Placing it in this orientation makes it stronger due to where the layer lines form. It will not print without…
I discovered the free and pretty good MobileWebCam android app that runs on all android devices going back to 1.5 and thought, why not build a mount and use this with an otherwise worthless old cellphone to keep an eye on my prints with…
There is a sacrificial strip included to help your print not pop off the build plate as shrinkage happens, especially if you use ABS. You'll cut that off. I suggest a brim with a small gap too. Make sure the bridging angle is good for…
PETG seems to hold up the longest, so I suggest printing it with that. Use Voron standard print settings for best results (no higher than .2 layer height or the snaps will not work). The tabs can be cut off to make end pieces. Each…
Designed to print easily on most FDM (or, layer-by-layer) 3d printers. Note that only PETG can be (fairly) reliably waterproof of the filaments we commonly print. Slow, hot, and with 3+ walls. Looks like a cupcake, which all fish…
This is a work in progress, but I have been feeding my chickens with it for about a month and it is working great for me. You'll need to buy a length of 4" PVC drain / irrigation pipe, for which a photo is offered.
12/12/21 - added a new pair of CableChain stls that use a larger clip. These should work better for less precise printers. A new design easy-print inner open cable chain, now that I've learned CAD. See also my somewhat more hackneyed…
The parent design had odd sized (20.26) X, Y, and a smaller Z axis. This should be precisely 20 on each side so you actually are calibrating. Thanks to original designer for the rounded edges, it does permit better measuring accuracy.…
While you can print it on its back if you have no faith in your printer's ability to bridge, or your bedslinger really slings it hard, it will benefit from being printed in the orientation it's offered in here. On a bedslinger, you'll…
Dough scraper with rounded handle, made it because I didn't find one here and I like working with sticky sourdough. Should scale up if you want it bigger without much difficulty. Print Settings Printer Brand: Creality Printer: Ender 3 Pro…
Prints as-is without much difficulty, virtually any printer should be able to handle the overhangs etc. Some bridging required. Should be printed in PET or ABS for strength, ideally, but for short term use PLA will work. Includes a cutout…
My office was short on file organizers, so I designed this. It is sturdy enough now to handle the job. The overhangs aren't too bad, most printers probably won't need supports.
Update 20210718 - The spacer-free versions are now tested. They work, though some fittings are a little tight. You may need to ream a few holes slightly or use the hole expansion feature of your slicer to get it perfect. Will try to…
It's a silverware drawer organizer. It's also a fairly useful retraction test that can help you tune your ideal temperature and fan for your filaments, though if you're a hardcore optimizer, you'll of course want something that tapers…
Designed for #6 drywall screws. Print with at least 3 bottom and 3 top layers. 10% gyroid with 4 perimeters works well. Any filament type is fine.
After designing and prototyping my latest corexy and delta printers, I had a lot of old empty spools of filament. How sad that they were destined for the landfill. So, I decided to try and make them useful, without using too much filament…
Just a quick remix to cross-reinforce the bracket. See the original for the remaining parts, it is the absolute best direct drive + V6 design I've seen yet, though it would frequently break off when tightened down. This remix tries to…
Make sure your bottom and top walls are at least 2mm thick. Print flat (as provided) for strength. The given dimensions are the maximum size print bed that the stl can fit on. Unfortunately the design doesn't work well with scaling…
Customized version of https://www.thingiverse.com/thing:116582 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=116582 Instructions Using the following options: cookie_cutter_dimension = 101 wall_thickness…
FreeCAD file included with one shallower variation, feel free to remix to fit your situation. Must print with supports as with all dome-shaped things. This will depend on your printer's ability to handle overhangs, but a general rule is…
Endoscopes are cheap cams, at least when you buy on ali. Here is a mount that lets you use these nice cheap cams on a 2020 or other extrusion to watch your print develop. Category: 3D Printer Accessories
I like the Nevermore series of filters a lot. But recent models are complicated and require a lot of hardware and time to make. I decided to design a probably less effective but significantly easier to print and use recirculating air…
If your filament spool holder tugs back too hard sometimes, this could be an answer. I created it in an attempt to rule out spool friction issues in Voron Issue 6. It seems to help. This thing uses your old worn out v-slot wheels to…
Laptop stand designed for a 18.5cm thick desk and virtually any size laptop, yet still printable on a 230cm bed. Mounts with two screws on underside of desk. I sleeved this with cut road bicycle inner tubes over the upper mount forks to…
Attach these printed parts first to the devices using the original screws. You'll remove two screws from the joystick bottom side (should be obvious which ones) and screw them back in through the body of the adapter. The throttle body…
Filament runout sensors need a low friction interface for the filament to pass through and the ability to tolerate variations in filament size. Vslot wheels have rubber on the outside to tolerate variations in size. Their inner core is…
matteeee's LED visor remixed to have a couple small slots to poke the leads of a LED or small LED cluster through. I happened to have a couple automotive 12v LED door lamp replacements, this turned that surplus into a great lighted…
These are all currently available results.
