Counting matching models…
This was scanned from an OEM hoodprop. I have printed this in Polylite ASA and mounted it on my car. The provided orientation provided the best quality on visible surfaces especially after vapor smoothing but you can easily print this on…
This was captured using a Revopoint Mini on a broken OEM trim piece and then repaired using Cloudcompare and Meshlab by cloning the opposite side and mirroring it to recreate the broken section. I created this for another individual and…
This model has not been test fitted yet, I will update here when it is but side-by-side looks promising. Captured using a Revopoint Mini, the STL uploaded is significantly lower resolution as the scanned file was half a gig and didn't…
Print Settings Material: Polymaker CoPA or any other Nylon (Annealing is recommended) Infill: 20% Supports: Tree supports on Build Plate Only Nozzle: I used a 0.2 Nozzle for this, 0.4 may work as well but it's a pretty small model so I…
Traced this out in FreeCAD from a flatbed printer scan (image included in photos), FreeCAD file is included for any alterations or changes. Unsure of if the bricknose trucks had these so labeling for 92-97 only for now. I started off with…
Had to shave off a little of the original design to fit on my 1990 Ford Mustang GT Vert as my hood prop retainer mounting location is 7.6mm wide and the print came out at around 7.9. Total print height came out at 12.6mm which is what the…
Based off of my 92-97 OBS Ford F-Series Truck Firewall Clip . I wanted to mount an Evil Energy Oil Catch Can to my 1997 F-250HD 7.5L (old body style) but couldn't find a good place to mount it so decided to create a drop-in replacement…
Part has been tested on an 87 Hardbody and appears to work well. Built with OpenSCAD, file included if you need to make any adjustments. Print Settings: Supports: Touching Buildplate Infill: 100%
Scale up/down as needed! Simple replacement belt that interchanges with Bissel Part Number 3031120 that can be printed in TPE/TPU. This belt is a little thicker than the original, FreeCAD file included if you would like to adjust. Printed…
Baseplate that sits between the metal antenna plate and the fender of the car. Did not see this part readily available for sale so decided to scan it and do a little cleanup to get it printable. Intention for this was to use it to design…
Should Fit Part Numbers 210-1009, 210-1010, 210-1011, 210-1012. Replacement Plastic Gear for the Motor. PolyGear was used to create the gear teeth which worked much better than the other gear libraries as it allowed me to set backlash…
I designed this shroud to keep my 14TB EasyStore cool as it would consistently run around 55C which is way too hot for a drive. After this mod, my temps are typically 31C which matches that of the drives in my computer case with dual…
Designed this to replace a missing part on my mustang, CAD file is available should you need to tweak, the push pin fins came out fairly ugly but do the job. If anyone knows how to make them more printable please feel free to modify and…
Designed to print in TPU (I used Overture 95A Red). Fuel Filter mount for an Older Trax 2 Transferflow tank, did not originally come with a filter but was added due to the stock pump failing and the newer systems using filters. If you use…
Replacement cam for the locks on my Snugtop Fiberglass Top for my 97 F-250HD. These should probably stay metal but I didn't want to pay to replace them. Customizer enabled to allow tweaking of dimensions. Note that the Customizer will…
Replacement for the two retaining tabs on the bottom of the power mirror switch face plate. tab.stl is the printable replacement, I printed one and epoxied it back on. tab.scad you can modify if you need to make adjustments for any…
Disclaimer: Photo looks slightly off as the gasket paper came from a roll, it was cut held down flat but has a tendency to bow when resting as it is in that photo Custom gasket for the BBK 3502 throttle body as the one BBK Sells (Part…
Measured from the dimensions of my original, it was broken already so they may be slightly off but the fit feels good on my Large Fitbit Surge. I would recommend printing in PETG or TPU if you're able to remove the supports on the TPU…
Designed to print in TPU (I used Overture 95A Red). This is used to locate the RV002 pump as it does not come with welded-on mounting tabs like the original pump. I still kept my ground wire on the stud without changing any hardware, just…
Simple case with a stand for a webcam that was harvested out of a Lenovo Laptop for it to be repurposed. The front and rear case simply press together, if you have issues pressing them together ensure that your printer is not…
These are all currently available results.
