Counting matching models…
Print Settings Layer Height: 0.2 Flat Top vs. Angled Top The flat top version has nicer lettering and is more neat, but one might prefer an angled top to avoid damaging wallpaper.
A cheap and simple way to remove receptable terminals from a molex microfit 3.0 pin. Usually, you need a special tool from Molex , but a stapler does the job just fine. One side takes two staplers (DIN 24/6), one takes a single one. The…
This is a remix of the original nozzlebox with options that fit Volcano and MK8 nozzles. Like the original, it prints in place and is locked by a magnet (6x2mm!) and an M3x6 (or smaller) screw. It doesn't come with any markings so that…
This is a magnetic backplate for a Voron V0.2 that replaces only the lower rear panel. It can be printed on a voron 0.2 itself and fastens together with clamps. Depending on your printer, some tolerances might be too tight and need some…
Boxes that are as close to the original as possible in all sizes from 1x1 to 7x2 (ping me if you need others, those are the ones that fit without breaking the container). Additionally, adds a corner box that fills the space between the…
I printed the test parts for the original model and quickly figured that all this needed were screws so it becomes a modular adapter, removing the necessity of reprinting the whole arm when changing iron, so here's all the original arms…
Remix of the excellent tool by @aldabest with a longer rod so it can remove both bearings on the Y-axis mounts on the Sovol SV06. Print Settings Layer height 0.2mm Sturdier settings, e.g. 1.2mm walls and stronger top/bottoms, 20% infill…
Designed to mount to the horizontal top extrusion of a v0.2 tophat, this AngryCAM remix moves the screw hole and the cable path so that the USB cable can be wired across the top extrusions to the top backpanel.
Chirpy kindly provided the STEP files for the hinge so I can make this quick adjustment. After replacing the original tophinges, the tophat will only open 125°, but can still be removed. It also prevents the tophat from falling off when…
UPDATE: There is now a “no_text” version for each style that comes without the text-object, making it easy to do a single layer swap (on Z0.3) instead. This remix uses only a single layer for the color change, making it a feasible print…
NVIDIA Tesla P40 Shroud with 2x4010 Fans on top instead of bottom
This case protects your keys when traveling and is easily attached and removed using the legs of the keyboard to lock it in place. It is based on the original dimensions and sits flush on the top surface of the keyboard. The latches lock…
Simple storage for heat-insert adapters like this . Print standing. Different options depending on your available screws: BOM (depending on options) 7x M4x12 or M4x10 BHCS/Countersunk 7x Hex Nut M4 With Hex nuts it's a bit nicer as you…
My take on a replacement bottom panel
These skirts come with 0-3 keystones on each side, in all directions a keystone can be rotated. They also come with an optional mesh that can be printed with a single filament swap. As the hex grid is prepared in the model, they will line…
Klipper's SCREWS_TILT_CALCULATE shows minutes to turn the screws. This gauge has a quarter hour on it and the hole has space for the allen-key to freely rotate.
A simple wedge that can be wedged between Adapter and spool so the spool rotates along the axis. Print with a coarse layer height so that it creates a staircase.
A remix of Malolo's case that an be mounted to the extrusion of the SV06
Print on the side, in PETG and use double-sided tape (VHB or other) to mount it on the rice cooker. It might be easier to first coil up the cable and then fix the mount to the rice cooker so lengths match up. Works for rice cookers with a…
A set of queue protectors for a pool cue (currently 5/16-18 and 12.5mm tip width only)
A fanduct that can be used instead of a carbon filter cartridge on a Nevermore V6 Micro. Attaches using magnets, keeps clearance for Rainbow on a Matchstick. As the model is currently prone to warping on the floor, there's clearance for…
Gantry mount that adds a WS2812B LED to the gantry of the Sovol SV06 using the screws used to mount the hotend to the gantry. Printing Layer height should be fine (≤ 0.2mm) to properly trap the LED, but otherwise prints fine with a 0.6mm…
Prints on the side, 0.2mm layer height is just fine. Use supports for a nice finish and slow external perimeters for better grip
A simple lamp shade for a clip reading lamp
A remix of malolo's infamous snap case adopted to work for the BTT Pi 1.2
Each time I take out a spool of filament and forget it has one of the silica containers in it, I drop it, the hygrometer will pop out and silica gel will be spilled in each ever-so-small crevice of my floor. This is my attempt at fixing…
This funnel can be used to trap a waste-bag under so that food waste doesn't miss the bag. UPDATE 2024-07-20: Now prints without supports!
I needed a wall anchor bridging ~50mm that may be taken off but is fast to reattach so I came up with this: The Base is screwed into the wall using a 3.5-4mm countersunk screw. The Spacer is mounted to the furniture piece using a M5 screw…
Properties Hole diameter: 5mm Distance between both holes: 32mm Distance from edge to first hole: 17mm Opening angle for a tube holder: 130° Tube diameter: 28.8mm Max tube cap diameter 35mm (with 1.75mm space between) Printing The pins…
Three takes on a stand for a cube. The files are normalized so that a cube of 100mm side length fits exactly (other than in the photos!). Scale it down to e.g. 80% so if you want a 100mm cube to extend beyond the stand like in the photos.
A simple three-layer label that fits into the label space on top of a SORTERA bin. The measurements are 79mm side-length, and a 2.5mm fillet. paper recycling by Vectors Point from Noun Project (CC BY 3.0)
Print with support. If you don't have enough hex-nuts, replace the bottom one with a heat-insert (M3x5x4 [5mm wide, 4mm deep]) Use M3x16 screws through the spoolholder, and the original M3x10 screws for the back-side.
These labels clip right on to the handle of a IKEA HÅLLBAR trash bin. This way even with the bin open, the bins can quickly be identified. Printing First layer (and the only color-change) should be 0.3mm Make the first layer squish…
Simple cable clips that can be printed in vase mode or with a thicker base and screw holes. Extrusion width should be at least 0.8mm. Pictured is cable-capture_7d1.2o7s_x5_vase which fits single USB cables fine. I recommend the 10mm 0.6mm…
I recently ran into some problems with the servo and had to take it apart again. This mount temporarily serves the same function as the rotating one. It also adds 3mm play on the mounting holes in order to make it easier to calibrate the…
Uses M3 3x4x4.5 / 3x6x4.5 heat inserts for mounting the bracket. The lightbar is mounted at an angle that should hit the nozzle in the center. I've printed it on the side as a tower with variable layer height for the heat insert mounts.…
This bathroom shelf comes in a few simple configurations for a two-person household, but you can also generate your own to accommodate any number of toothbrush heads, interdental brushes, lash combs etc. using the massively overengineered…
Print in TPU. If they are too loose, use tape or glue.
A new take on one of my early models, with extra pegs, no supports needed
This is a parametric glass lid holder. The STL is configured with 58mm, 72mm and 87mm diameter, which fits a lot of European glass lids. It can be customized with this onshape model .
I needed a tray to inspect 30g+ beans, so I designed this tray.
Fits hairdryers that take 64mm diameter adapters
An adapter to use m5 nuts instead of t-slot adapters for the cue lathe
These are all currently available results.
![Nevermore V6 Micro Aux Fan Duct Adapter [Proof of Concept] for Voron V0](https://media.printables.com/media/prints/769438/images/5986970_c956c956-9851-4992-aae7-aeba00a74413_28959fe5-24ce-4ac2-b408-f1cbc0bfb969/img_20240217_212102.jpg)
