Counting matching models…
I recently found the guitar amp-styled key holders here on the platform, which I really like, but I wanted something closer to a fifties or sixties style radio receiver - the ones with bakelite housings in gaudy pastel colours. I also did…
Update 5/24: You need 6 screws @ M3x30 for the hinges and latches. As described in some makes, the fit of the two halves of the case is quite snug. Some prnters seem to be over-extruding when standard profiles are used - that's when the…
*** Update September 2024: Added an adapted middle piece that fits the new MK4S cover, that has slightly different dimensions vs. the MK4. *** Update July 2024: I added a remix where the center piece accepts th flush xLCD cover by…
Knurled screw-top container as 7-day pillbox I combined the container with the lid to make stackable containers (which I recognize has been done in other makes before). Also, I modified the ring piece of one container to be square on one…
Network connector box for Original Prusa Enclosure using Neutrik A-Type or D-Type sockets - suitable for USB and RJ45 connectors (22mm or 24mm hole). The box houses two Neutrik connectors and has two mounting holes spaced 60mm apart so it…
*** Update September 2024: Added an adapted middle piece that fits the new MK4S cover, that has slightly different dimensions vs. the MK4.*** *** Update July 2024: I added a remix where the center piece accepts the flush xLCD cover by…
I built a quick dummy 18650 cell to use a charger as power source to charge a cell, that needs to remain inside a battery case. After printing I used adhesive copper strip to wrap around the ends and tinned the copper quickly (to avoid…
Update: Optional version: top part of the box now has a recess that holds the key. (see picture). To get that, print “top-.stl” . I created another gift card torture box - inspired by Bobby Thunders design, but slightly different: The Box…
Just a sturdy box for the most popular whisky glass. Based on the wonderful Penguin Box design. Fits 1 or 2 standard Glencairn glasses. The box comes with a matching TPU seal (separate stl). I also included the imho most suitable hinge…
When you add the hinged lid to the Prusa enclosure you are in fact turning the original metal lid upside down -
numbered lids for standard Glencairn glasses or any tasting glass up to 50mm diameter. Comes with a little shelf for 8 lids. I included the OpenScad files so you can change numbers or the size of the shelf as needed. I suggest printing in…
I edited the great customizable OpenScad-based penguin box file by* ctag * to house my "driver's kit" for whisky samples. The remix features a TPU seal. The scad-file now also features an option "oring_only" where previously you could…
So I created this insert for the bottom storage shelf of the center console. It is a press fit and holds the phone securely, + has space for three pens.
I designed this PZB input panel to use in a railsim / driver's console environmant. Switches are based on readily available components and the appearance is pretty close to what you can find in many driver's cabs of locomotives / EMUs /…
I previously printed Twxii's beautiful case for the Wowstick 1f+ set. Then I thought I should have this in a rugged case - so I customized Rainer Backes parametric rugged box to fit the case snugly. I actually fits so well you don't even…
generously-sized piggy bank in the style of an old transistor radio, allowing a peek at the collected fortunes through the front (speaker) grate. It is quite sturdy and can also be used for collecting cash donations at a public or club…
I built this very simple case for the Treedix USB cable tester
I used the knurled container script by M_D_K to create a container for hand cream that fits my toilet bag, but isn't too tiny and can be refilled. This is 90mm in diameter and 20mm flat. It can be closed securely with a nice long thread…
A second version of the case for whisky sample bottles. As requested this is adapted to fit 2oz bottles that seem to be ~97mm tall and 41mm wide. Pls note: I do not have this bottle type (they are not common where I live), so I can not…
I created a fully customizable clip for wall mounting power supplies, docking stations, etc. using OpenScad. Easy print in PLA or any filament you fancy (the final product could be a bit useless when printed in soft TPU I guess). Just…
modified the original key so it does NOT open the lock. Indent no.3 would now require a mid-size pin, but the lock has a short pin in that position. --- modifizierter Schlüssel zu Thorins wunderbarem Modell eines Profilzylinders - er…
Housing for a cable splitter or transition from stereo to mono cable. Print two identical pieces and hide your soldered connection in it. You can either fill the housing with epoxy resin or just use a suitable size of shrink tube to hold…
Update 12/25: I added a threaded version. Use that if you don't trust the press fit between the two parts. The thread is equivalent to an M10 threaded bolt. ---- Update 12/25: Ich habe eine Version mit Gewinde ergänzt. Das Gewinde…
Just a small add-on to the wonderful folding door mechanism: A latch that eliminates the need for extra magnets and allows for a more quiet closing of the door. The little latch makes you close the folding door by inserting the pieces…
I printed in PETG with a 0.6mm nozzle. 6 perimeters, 0.25mm layer height - makes for a very sturdy mounting bracket
I built a functioning Super Clamp style mini clamp for the spotlight made by Depronized. The clamp is inspired by the iconic Manfrotto type 035. It also works with M3 bolts and nuts. Have fun! In the picture shown above, the clamp…
This adapter was needed to flood an RV's double floor with hot air from a Truma heater. It will adapt the standard Truma flex hose (60mm inside diameter) to a rectangular outlet of 100x30 mm. The double floor in question is very shallow,…
Holder for the standard Glencairn glass and for the smaller version. I added both stl and scad files so you can integrate the glass holder into any printable box or case of suitable size. The holder is fitted with a T-grove and tennon so…
****Update 22.10.24:**** Adding a lid, that closes the underside of the base, trapping the USB lead and plug. ---------- I bought one of these little DIY sets that you can get from Aliexpress and tried to make it into a more presentable…
This is a stereo squeezebox player based on a Raspberry Pi, the components inside are: a Raspberry Pi 2 or 3 a Hifiberry audio card + a tiny amp board (or similar) or a Hifiberry Amp (or similar), Original 7" Raspberry touch screen and…
I wanted to have a more compact handle for the current Bialetti Venus (6-cup) because I use it on the road. The more compact shape means, that the handle is closer to the (hot) steel pot - so be careful and don't hurt yourself. An even…
just adding a non-slip nut to the Streamcam mount
I built a simple roller / turntable mechanism to feed tape material to a sewing machine - 25mm (1") spi tape on spools with 50 and 70mm internal diameter. Use the supplied adapter ring for 70mm spools. There are two plates (star-shaped)…
Update July 2025: The original glue card has disappeard form Thingiverse. I added the correpsonding .stl file here The idea was to use a few grams of left-over filament to create a little mixing plate and spatula as disposible items for…
I found and printed several add-ons for the Prusa enclosure, but I could not find this combination so far. I printed this with simple through holes suitable for M3 bolts/nuts. Fits regular paper towel rolls and spray bottles up to 55mm…
I love mi.strz's original design for a parachute lift to work with lifter kites. The only part of the design that did not come out very strong in my print were the hangers that go around the lifter's kite line. This is a modified version…
I modified Torstens lamp shade to fit my modified illumination spike
update: I just found an existing model in Scale I and II - obviously I previously did not find the proper search words. Still, that model is not functional (no threads) - see my " railway stuff " collection. I don't think a thread for…
I designed this tiny sensor case around the popular D1 mini and a BMP280 sensor. It is a very sturdy case that is held together by 4 bolts M3*8 and features a blind button hole at the back so you can hang it over a nail or screw head. For…
I have been building kites for many years, but when packing for my first kitemaking workshop I found that my essential sewing utensils are a bit different from what comes as a pre-made accessory kit for a Bernina 335 - so I made my own…
I created a wall-mounted box for holding Gardena accessories I need for my RV. The box is designed to hold the tap connectors in ¾" (most common in most parts of Europe), ½" (found in Sweden and Norway sometimes) and 1" (sometimes found…
I made a ridiculously over-engineered vault built like a heavy steel cylinder with flanges, two lids with matching seals, closed with 12 bolts. The vault can hold 12 small bottles of precious spirits of 40mls each (bottles 32mm diameter,…
I needed to change a cutout for a Neutrik A-type outlet (22mm cutout) to a D-type cutout (24mm). For the main hole this is easy with a step drill, but the different position of the mounting screws is a bit messy, since they overlap with…
Adding a diffusor cap for the Olight Perun. I used a (manual) color change after a couple of layers.
I really like the flush xLCD cover that have recently been published. The one by firetech is slightly wider than the original, does not need the “external” light bar and so it does not fit my fender pieces. So I made a new center piece…
I made a simple pocket light holder for the OPE, sized to hold an O-light Perun pocket light (Perun's diameter is 23mm). Can be customized in OpenSCAD - I attached the .scad file. There is a version available that allows you to use…
love the idea of the Octoprint progress indicator - trying to change the styling a bit by hiding the MCU
update 04/25: adding a version for 14 pcs. of 2oz bottles - same footprint of the box -------------------- I created a box to hold 24 spirit sample bottles @4cl with 31mm diameter. The shell is based on Rainers wonderful script You need 9…
I messed around with the Open SCad model created by zolkoth
Update 05/24: I changed the .stl file so it shows the individual pieces in their correct orientation for printing. You will still want to print the seal piece in a different filament though… I build a case for a nixie clock based on Claus…
I had a 4G Panorama antenna from my campervan sitting around (replaced it with a 5G antenna) that I wanted to use in a stationary environment. So I created this mounting bracket. This fits disk-shaped antennas with 170mm diameter and a…
Current models of Thüros grills come with rubber feet. For the old model I use this is not available. So I printed my own in TPU. These feet will work for anything that has 90° corners and is made from steel of ~1mm thickness. Printed…
I created a bolt with an M20-compatible thread and a wide and flat head to build fabric weights for my kitemaking projects. The Nut Job script for OpenSCAD makes this a very easy task. I added thin adhesive felt pads underneath to protect…
I tried to print the 60mm sized egg by Superbeasti (scaled up to 100mm) with two layers of transparent PLA and NO solid infill around the top and bottom end (as the infill is very visible when using transparent filament). As a result,…
I created this center connector for star kites. This can be fully customized (diameter, spar diameter, number of spars, etc.) Print in PETG or other strong filaments with good layer adhesion. I suggest using 0.15-0.2mm layers and 3…
When looking for an iris-lid container to use for solder (flux) paste (50g jar, 68mm diameter, "Felder Lötfett"), I found RADdesign's model and decided to modify it. model scaled down to 77% to fit my jar (50g) of solder paste scaled…
Case for the kite ferry - all the ferry hardware needed on the beach in one place
This is a ridiculously over-engineered gift box in the shape of a pressure cylinder for a precious item / gift - the cylindrical void inside and bolt sizes (and number of bolts) can be configured in a wide range using the OpenSCAD file.…
Many USB PD power supplies and other electronics devices from China nowadays come in cases that are built from a 50x20mm aluminum extrusion (see for example here ) and have front/back plates, that are attached with M2 screws in a…
I designed a dispenser for duct tape that will also guide a cable you want to tape to the floor. Works with duct tape spools w/ 75mm inside diameter and up to 150mm outside diameter (tape with 50mm width). I created the thread using the…
I want to monitor the onboard voltage of my camper while it is not in use, but stored in my garage. With Wifi coverage established, I can integrate this in my automation (I am using Domoticz). The project is a simple combination of…
I created this small espresso podest for my Nivona Cube 4'. It will fit a 6cm high Espresso can or cup. Please print with at least 30% infill to get some weight. Supports are a good idea for the base and use a filament that doesn't melt…
Update: I designed a different core for the beacon, that houses a piece of addressable RGBW LED string (19 LEDs fit if you have a string with 144 LEDs/m), a Wemos D1 mini, the batteries, the charging board (HW168) and the little switch. I…
I liked Hamsterprints idea, but this time it is about the S-Bahn - so I re-created the idea and here is the complete set. I used the Vegur font which should be similar enough to the correct (but copyrighted) FF Traffic font. As for colors…
For a clean print, use supports in the middle.
This is just the stl for the picture frame itself - if you don't want to use an actual, commercially available one. The frame has the required recesses so the unit designed by Kingfisher can be locked in place just like in the “real”…
I liked Hamsterprints idea, but for the Berlin U-Bahn colors and font were a bit off - so I re-created the idea and here is the complete set. I used the Vegur font which should be similar enough to the correct (but copyrighted) FF Traffic…
As described in detail in my make of Erwin's wonderful messenger that in turn was derived from these plans, I made minor modifications to a few of his parts and added two more parts. I added the files for both here. Modified parts are in…
I made these simple trays for packing sample bottles for shipping - adjust parameters in OpenSCAD for the size and number of bottles. This is a quick and easy print, use 5-10% infill. The version displayed here is for 5 bottles of 5cl.
These are sturdy mounting brackets that will allow you to mount a Raspberry Pi touchscreen housing (for the 1st gen 7" touchscreen) under a kitchen cabinet. Replace the 4 original countersunk M3 screws in the back with M3x10mm bolts and…
These are all currently available results.
