Counting matching models…
DeWalt 18V XR Battery (Transport) Cover/ Holder (With a hole for a hanging loop). Print settings: 🖨⚙ Material: PLA Layer height: 0.2 Infill: 25% Support: NO Print speed: 30mm/s ⚠ (Notes: The cover is printed in portrait. Also works with…
Atorch DL24 150W Electronic Load Case For the newer version that can be powered by a 5V USB-C power supply . The top cover can be installed without having to disassemble the heatsink with fan and re-paste the transistor - The top cover…
Sanding Block — With Sliding Lock Button: You will need: Spring from an old ballpoint pen (support for two spring sizes, 20 and 26 mm long) M3 countersunk head screw, length 40 mm M3 nut Strip of sandpaper 230 mm x 40 mm (It is suitable…
Xiaomi Redmi 13C Phone Case: The case is slightly taller than the phone (+0.7 mm) and will also cover the height of the phone with protective glass (e.g. 0.4mm Gorilla glass, etc). Tolerances for model are 0.2 mm (offset from phone). The…
Power Distribution Block for Three 221-415 (Five Socket) Wago Clamps, with Clips and DIN Rail Mount. About model: There is a version for classic M3 nuts and for heat-set M3 nuts. Three zip ties holes in the front for securing secondary…
Four boxes as an insert organizer for the Systaner³ SYS3 M 112 suitcase. Model info: Variant A and Variant B are available, refer picture. (Note: box 1 and box 2 are the same for both variants (A, B)) Print settings: 🖨⚙ Material: PLA…
Magnified Lego Streamer Flag with Stand and Pole Here you will find: Lego Flag with Stand and Pole. (Only) Lego Flag for TP-link router wifi antenna (with smaller inner hole diameter). Big Boy Lego bricks (Accessories compatible with the…
Battery Box with Slide Lock Button: You will need: Spring from an old pen (length: 20-25mm, diameter: 4-4.6mm). A piece of filament for the hinges (seal the ends with a lighter). (Hint: Some ballpoint pens have longer springs, like 30mm,…
Mounting Wedges: For work such as laying floors and for other applications… Self-Locking: 🔒🔑 Works with each other when used in pairs, but the wedge will also work well alone. Bended: ➰ Works as a compression spring and secures the wedge…
Funnel for 5L Canister: A pouring aid for a 5L canister into smaller containers, either through another triangular funnel, or directly into a smaller container if the neck fits into it (the outer diameter at the outlet is 17 mm). ◦ Two…
Stand for Uni-T UT123T multimeter and its accessories: Sarcophagus stand with rear drawer (for storing the thermal probe and others stuff), probe and test tweezers holder (with a back pocket to store tweezers connectors) and hooks on the…
HoneyComb fanduct for Turbo Fan (40x40x20) like add-on for E3DV6 hotend (ideally combined with BMG BondTech direct drive extruder). I revised the model to a new version, Rev2_2024, the main changes are: More accurate dimensions It is…
Dimensions: 📐Width 53 x Height 35 x Length 110 mm (External dimensions without handle). Print Settings: 🖨⚙ Filament: PLA, PETG Layer Height: 0.3 Infill: 30% Support: NO
Phoenix ashtray: For personal/travel usage With groove for sealing rubber (For a regular hair band with a diameter of 4 cm) Bayonet thread Print Settings: 🖨⚙ ◦ Material: ASA ◦ Flow rate: 96% (But first layer at 110%) ◦ Nozzle diameter:…
Sandworm 3D printer - Main page: Signpost: Main Scheme of Boards Drive Mount XY Axis Z Axis Chassis Top Chassis Middle Chassis Bottom Electronics Extruder Filament and Spool Levelup Addons PrusaSlicer Tools Bill of materials (BOM) Gallery…
Stand for Alientek DM40 Multimeter and its Accessories: Improvements: ◦ Test probes can be inserted into the stand with or without protective caps ◦ Model has built-in ON / OFF / LOCK button Non-printing necessary accessories: ◦ 4x M3…
Sandworm 3D printer - Electronics: Signpost: Main Scheme of Boards Drive Mount XY Axis Z Axis Chassis Top Chassis Middle Chassis Bottom Electronics Extruder Filament and Spool Levelup Addons PrusaSlicer Tools Bill of materials (BOM)…
Sandworm 3D printer - Levelup Addons: Signpost: Main Scheme of Boards Drive Mount XY Axis Z Axis Chassis Top Chassis Middle Chassis Bottom Electronics Extruder Filament and Spool Levelup Addons PrusaSlicer Tools Bill of materials (BOM)…
Sandworm 3D printer - Bill of materials: Signpost: Main Scheme of Boards Drive Mount XY Axis Z Axis Chassis Top Chassis Middle Chassis Bottom Electronics Extruder Filament and Spool Levelup Addons PrusaSlicer Tools Bill of materials (BOM)…
Depth Stop for Makita SP6000J Plunge Saw: Improvements over the original: ◦ Corrected depth stop for measuring cutting depth on a plunge saw with a guide rail Recommended Print Settings: 🖨⚙ ◦ Material: PLA, PETG ◦ Nozzle diameter: 0.6 mm…
Sandworm 3D printer (SN 001) - Gallery: Signpost: Main Scheme of Boards Drive Mount XY Axis Z Axis Chassis Top Chassis Middle Chassis Bottom Electronics Extruder Filament and Spool Levelup Addons PrusaSlicer Tools Bill of materials (BOM)…
These are all currently available results.
