Counting matching models…
this is a slime that i printed in tpu 95. tpu 95 is not as soft and squishy as i would like it. i bet it would be better with tpu 85. i designed this profile to print slow. print this at .12 layer height. i have tried printing this at .2…
this is based off the bo3/bo4 zombies aether mystery box. the brown that i used is not the actual color of the mystery box from the game. this is v3, and i think i got the dimensions for the box right. i believe the correct color for the…
this is based off the bo1/bo2 zombies aether mystery box. the brown that i used is not the actual color of the mystery box from the game. this is v3, and i think i got the dimensions for the box right. i believe the correct color for the…
this is based off the booze bottle from the bo2 zombies buried map. you can print the bottom with black XXX but it will have a lot of filament changes with about 72 grams of waste.
this is based off the golden spork knife from the bo4 zombies blood of the dead map. you dont have to do a long easter egg to print this, enjoy! dimensions: about 8.6 x 1.6 x 0.8 inches This is printed with 100% infill. glue the gems in…
this is based off a pretty simple scythe. this is a shell for a bic pen ink refill stick. other pen refill sticks might work. if the refill stick is too long, try cutting off the end of it. 7 inches long. handle is .375 inches in…
the artist is Ryan Ottley. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 176x220mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x160mm in size You may print at higher layer heights below the Base Thickness of 0.4mm The Max allowed Thickness is 2.16mm and the Actual…
this is a 8mm tunnel earring. this is a remix of one of brentglover1970 plugs. i remixed this to make it look like a spur gear. i do not know if this is scalable.
this is based off a pretty simple magic staff. this is a shell for a bic pen ink refill stick. other pen refill sticks might work. if the refill stick is too long, try cutting off the end of it. 6.5 inches long. the cap fits pretty snug.…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in size You may print at higher layer heights below the Base Thickness of 0.32mm The Max allowed Thickness is 2.08mm and the Actual…
this is based off a medieval battle axe. this is a shell for a bic pen ink refill stick. other pen refill sticks might work. if the refill stick is too long, try cutting off the end of it. 7 inches long. handle is .375 inches in diameter.…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x160.03mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.24mm and the Actual…
the artist is luciano vecchio. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in size You may print at higher layer heights below the Base Thickness of 0.64mm The Max allowed…
this is a 8mm plug earring. this is a remix of one of brentglover1970 plugs. i remixed this to make it look like a hand is grasping the ear. i do not know if this is scalable.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x160mm in size You may print at higher layer heights below the Base Thickness of 0.64mm The Max allowed Thickness is 2.4mm and the Actual…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 230x153.33mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.24mm and the Actual…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 160x200mm in size You may print at higher layer heights below the Base Thickness of 0.32mm The Max allowed Thickness is 2.08mm and the Actual…
this is based off the weapons locker from the bo2 zombies die rise map. glue the gray handles to the door. the rounded part of the handles should be at the top and bottom part of the door, not the center. glue the gray square to the top…
this is based off a medieval flanged mace. this is a shell for a bic pen ink refill stick. other pen refill sticks might work. if the refill stick is too long, try cutting off the end of it. 6.75 inches long. handle is .375 inches in…
the artist is john tyler christopher. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 159.97x200mm in size You may print at higher layer heights below the Base Thickness of 0.64mm The Max…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 230x129.38mm in size You may print at higher layer heights below the Base Thickness of 0.64mm The Max allowed Thickness is 2.4mm and the Actual…
the artist is dike ruan. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in size You may print at higher layer heights below the Base Thickness of 0.64mm The Max allowed Thickness is…
this is based off the weapons locker from the bo2 zombies buried map. glue the front piece to the main body. glue the legs to the main body. glue all the little cabinet parts to the their designated locations. there are guide bumps on the…
This is faputa from made in abyss, sosu. this is based off a screenshot from the anime, sosu. this is a small relief sculpture i made while messing around on makerlab, sosu.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in size You may print at higher layer heights below the Base Thickness of 0.32mm The Max allowed Thickness is 2.08mm and the Actual…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 159.94x200mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.24mm and the Actual…
the artists are Khoi Pham, Tom Palmer, and Sunny Gho. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 157x220mm in size You may print at higher layer heights below the Base Thickness of 0.48mm…
This is sam fisher from the splinter cell video games. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 159.91x200mm in size You may print at higher layer heights below the Base Thickness of…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in size You may print at higher layer heights below the Base Thickness of 0.64mm The Max allowed Thickness is 2.48mm and the Actual…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.24mm and the Actual…
This is Mob (Shigeo Kageyama) from mob psycho 100. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 160x200mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 230x129.38mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.24mm and the Actual…
These are all currently available results.
