P
PrintablesRyan _
Dragon Burner V6 Groove Mount (Fixed)
Changed the geometry of the V6 groove mount so it doesn't snap in half when you press the heatsink into it.
- Downloads
- 359
- Likes
- 30
- Rating
- 5
All models
Counting matching models…
P
PrintablesRyan _
KP3S 3.0 DRAGON BURNER MGN12C MOUNT
Mounting bracket for dragon burner on MGN12C linear rail with X limit switch stop bar. Modified mounting holes for MGN12C hole distance. Moved them down a bit as well, so you can access the dragon burner mounting screws from the rear of…
- Downloads
- 152
- Likes
- 22
- Rating
- 0
P
PrintablesRyan _
Titania Extruder with 10mm OD bearing
Modified Titania extruder to accept the bearings (and gear with 6mm shaft) from Titan clones. Increased the bearing hole diameter from 9.2mm up to 10.2mm. Titan clones use a bearing sized at 10mm OD x 6mm ID x 3mm. The gear shaft on…
- Downloads
- 79
- Likes
- 12
- Rating
- 5
P
PrintablesRyan _
Case Enclosure for NGFF WWAN M.2 Key B to USB 3.0 Adapter Board with Dual SIM
This is a simple case for the generic WWAN "NGFF M.2 to USB 3.0 Adapter M2 Key B to USB 3.0" adapter. You can find such an adapter on Amazon, eBay, AliExpress etc. https://www.aliexpress.us/item/3256804635197714.html The two small clips…
- Downloads
- 76
- Likes
- 7
- Rating
- 4
P
PrintablesRyan _
KP3S 3.0 HBV-W202012HD camera mount for Z axis
This is a Z axis camera mount for the KP3S 3.0. This uses the low cost HBV-W202012HD camera module. Printer: KP3S 3.0 Filament: PLA Infill: 15% hexagonal Nozzle: 0.4mm Layer Height: 0.2mm Supports: organic, only touching build plate…
- Downloads
- 75
- Likes
- 3
- Rating
- 0
P
PrintablesRyan _
Guillotine kit card model blade holder fix
I had to widen the holes in the blade holder for the blade to slot in nicely. I printed the entire kitcard at 0.16mm resolution, which may have caused the problem. All of the other holes fit quite well other than the 3 on the blade…
- Downloads
- 40
- Likes
- 10
- Rating
- 0
P
PrintablesRyan _
Hercules Battery Adapter for Integration
Remix of https://www.thingiverse.com/thing:7120865 Converted the original models above into CAD workable files using F3D Prismatic conversion tool. Modified to fit new batteries (they have a tab now that doesn't work with the original…
- Downloads
- 17
- Likes
- 6
- Rating
- 0
P
PrintablesRyan _
Canon Pixma IP6600D Disk Tray
Modified from the IP6600D card tray STL. Converted card tray STL into STEP via FreeCAD and imported into F3D to convert it into a disk tray. Used the commonly available DIY template (see…
- Downloads
- 12
- Likes
- 1
- Rating
- 0
P
PrintablesRyan _
Canon Pixma IP6600D Card Tray
The only pre-existing part I could find for this printer was the PVC card tray on Thingiverse. It was only available as a STL, so I used FreeCAD to convert it into a STEP file. You need to place silver tape, glue some foil, or use a…
- Downloads
- 3
- Likes
- 0
- Rating
- 0
P
PrintablesRyan _
Washer Bearing Kit 285203 Install Helper / Guide
Install Helper / Guide for hammering in the bearings and seals in the 285203 kit. It's basically impossible to install the seals in this kit without some sort of guide. NOTE: Make sure you sand the inside of the tube the bearings/seals…
- Downloads
- 3
- Likes
- 0
- Rating
- 0
P
PrintablesRyan _
Canon Pixma IP6600D Automatic Slot Feeder (Paper Input) Tray
The hinge was broken on my paper input tray so I recreated the entire tray. I realized it was also missing the paper straightening flap that (apparently) automatically folds out. I recreated this flap from a few pictures, included in the…
- Downloads
- 2
- Likes
- 0
- Rating
- 0
P
PrintablesRyan _
Kenmore 110 Series Washing Machine BlueStars Capacitor Holder
Replacement capacitor holder for the Kenmore 110 (and potentially other) series washing machines. The OEM capacitor is overpriced, and you can get a BlueStars branded replacement capacitor for around $10 on Amazon. For my Kenmore…
- Downloads
- 2
- Likes
- 0
- Rating
- 0
These are all currently available results.