Counting matching models…
EN: This is a toy pillory handcuff whose locking piece can be moved and then secured with a rope, a padlock, a carabiner or simply a bolt and nut. At the request of the youngsters, the wrist holes are designed to be rather narrow at…
Print approx. €2.36–€2.88 excl. taxPreliminary estimate for PETGSource material: PET
This is a remix of mdkendalls successful “2,5” Three Jaw Chuck" for mounting on a Revopoint dual-axis turntable. The chuck can be mounted on the turntable with M6x8 countersunk screws or with the screws developed by Whitehawk2000 . From…
Print approx. €2.85–€3.48 excl. taxPreliminary estimate for PETGSource material: PET
The door holders wear out over time to the point of being non-functional, so I constructed more robust ones in the same dimensions: The upper part (female) measures 98 x 22 and has a hole spacing of 78mm. The two lower parts (male) have…
Print approx. €2.16–€2.64 excl. taxPreliminary estimate for PETGSource material: PET
Since I needed a liftarm with holes instead of crosses and in regular as well as half thickness, I constructed a 3x5 and 3x5x0.5 liftarm similar to the Lego - parts 99773, 65193, 2905. Print the liftarms in STL orientation with support on…
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for PETGSource material: PET
EN: This is a folding toy pillory handcuff that can be locked with a padlock, a carabiner or simply a screw and nut. At the request of the youngsters, the wrist holes only have a diameter of 48 mm. For ‘adult use’, you can simply scale…
Print approx. €3.09–€3.77 excl. taxPreliminary estimate for PETGSource material: PET
EN: This compact housing is designed for an LD2450 radar sensor with Bluetooth antenna and an ESP8266 Wemos D1 Mini V4. It is based on F-Square's multi sensor design , but is a new development except for the rear ball joint . The radar…
Print approx. €1.61–€1.97 excl. taxPreliminary estimate for PETGSource material: PET
This sunshade is compatible with the original BMW Motorrad smartphone holder "Connected Ride Cradle". Unfortunately, there is no sunshade for the cradle from BMW, so I made one myself. Mounting Instructions: unscrew the screw at the…
Print approx. €7.46–€9.12 excl. taxPreliminary estimate for PETGSource material: PET
Removable strong hook to hang something on a Vogel & Noot Type 21 two-layer compact radiator . Update 07.03.2020: Added a slightly stronger version V2.0 with rounded edges. I recommend printing this in a material like ASA, ABS or PETG…
Print approx. €0.90–€1.10 excl. taxPreliminary estimate for PETGSource material: PET
Update 19.10.2024: EN Notice: Since I remixed my Front Nozzle holder before the release of Krys own A1 version, it is compatible with Krys ‘A1 mini’ purge catch tray. So please combine my A1 remix with Krys PrusaXlFrontNozzlePurgeA1Mini…
Print approx. €1.07–€1.31 excl. taxPreliminary estimate for one variant
These are two remixes of the bit holder insert for the Miniware ES15 cases from 3DP-MAMSIH , 51m0 and PjotrStrog . The bit holder allows 55 bits to be accommodated in the case. The version with the magnetic/finger recesses holds 47 bits.…
Print approx. €1.24–€1.52 excl. taxPreliminary estimate for PETGSource material: PET
This is a remix of the excellent broom holder by Rebewppilihp for mounting on a railing tube with 34mm diameter. M3x20 screws with up to 6mm head size are suitable for mounting. The joints are best connected with DIN EN ISO 4762 - M3x20…
Print approx. €3.06–€3.73 excl. taxPreliminary estimate for PETGSource material: PET
Here is an adapter for mounting the very popular miniature vice “Nano Vise 2.0” as well as the “Nano Chuck” by PRima (remix of mdkendalls “2.5 Inch Three Jaw Chuck” ) on the Revopoint Dual-Axis Turntable. The holder can be attached to the…
Print approx. €0.23–€0.28 excl. taxPreliminary estimate for PETGSource material: PET
This is a sturdy wall bracket for hanging an Ikea Samla 22L box securely on the wall. The box is hooked onto the top and the square feet at the bottom at the same time. The box can be easily positioned along the bevelled bracket and hung…
Print approx. €6.41–€7.83 excl. taxPreliminary estimate for PETGSource material: PET
This is a miniature wooden plank bench for doll's houses and the like (...without text in the backrest, as in some of the photos). The bench and backrest are simply slotted together after printing. Print the bench in STL orientation with…
Print approx. €0.73–€0.89 excl. taxPreliminary estimate for one variant
This is a heating booster for Vogel & Noot Type 21 two-layer compact radiators in widths 132cm and 62cm at 80mm depth. The system works with standard 8cm PC fans (3 pin) which connect the printed segments together. In addition, the…
Print approx. €0.11–€0.13 excl. taxPreliminary estimate for PETGSource material: PET
This is a trigger lock to prevent unauthorized use of an FX Dreamline pcp air rifle. Simply print in STL orientation at 0.2 layer height and 25% infill with no support, attach a padlock and lock. The trigger lock will work with any…
Print approx. €0.34–€0.42 excl. taxPreliminary estimate for PETGSource material: PET
EN: The offspring insistently demanded, that the Ikea Aftonsparv Soft Toy Alien (ours is called ‘Günther’) should also sit at the table. So we immediately had to find a suitable seat for Günther that could simply be clamped to our 25 mm…
Print approx. €6.06–€7.41 excl. taxPreliminary estimate for PETGSource material: PET
EN: This is an ergonomic handle for converting an inexpensive Chinese telescopic slingshot (see last two pictures). Thanks to the brilliant OpenScad script by Anachronist aka Amatulic , I was able to create a handle that fits perfectly in…
Print approx. €4.98–€6.09 excl. taxPreliminary estimate for PETGSource material: PET
This is a diffuser that can be used to evenly distribute the light from Philips Hue E27 LED bulbs. Other light sources may also fit inside. I originally made the diffuser for a triangular lampshade , but it also works as a stand-alone…
Print approx. €1.39–€1.70 excl. taxPreliminary estimate for PETGSource material: PET
These are Lego-compatible doors. One left and one right door can be used together as a 5x8 gate. The doors can be swivelled inwards and outwards. Print the doors in STL orientation with three outer layers, 15-25% infill and support. — I…
Print approx. €0.39–€0.48 excl. taxPreliminary estimate for PETGSource material: PET
This is a hook that slides onto 28/30mm pipes. Simply scale it to fit other sizes or use the step file for customization Prints the hook in STL orientation with 4 outer layers, 5 top/bottom layers and 25% infill. — I would be very happy…
Print approx. €0.39–€0.48 excl. taxPreliminary estimate for PETGSource material: PET
This is a large triangular lampshade designed for use with either a floor or hanging lamp. I am using a 7.5W Philips Hue E27 bulb with a matching diffuser inside the lampshade. The shade is made up of three identical sections, each with…
Print approx. €3.11–€3.80 excl. taxPreliminary estimate for PETGSource material: PET
EN: With this adapter, an Ecowitt WS90 weather station can be mounted on pipes or railings up to 45mm in diameter using a standard M8 pipe clamp. The adapter has a diameter of 25mm and a recess especially for the WS90 power connection…
Print approx. €1.52–€1.85 excl. taxPreliminary estimate for PETGSource material: PET
These are Lego-compatible doors. One left and one right door can be used together as a 5x8 gate. The doors can be swivelled inwards and outwards. Print the doors in STL orientation with three outer layers, 15-25% infill and support. — I…
Print approx. €0.47–€0.58 excl. taxPreliminary estimate for PETGSource material: PET
This is an adjustable grappling hook whose hooks can be adjusted in angle and fixed with an insertable plug. There are thin and slightly larger hooks as well as the step files for your customisations. Print the centre part of the…
Print approx. €1.48–€1.81 excl. taxPreliminary estimate for PETGSource material: PET
This is an adapter for inflating a Forclaz Trekking MT500 Air mattress from Decathlon with an inexpensive electric mini air pump from Pacoone (square version with lamp). The adapter is simply inserted between the pump outlet and the…
Print approx. €0.27–€0.33 excl. taxPreliminary estimate for PETGSource material: PET
Update 05/23/2024: Now that Frantisek23 has further perfected his design , I definitely recommend his new solution and basically declare my remix obsolete. Since the EndRib_V1b Mini.stl model is no longer available from him in the course…
Print approx. €1.33–€1.63 excl. taxPreliminary estimate for PETGSource material: PET
These are Lego-compatible doors. One left and one right door can be used together as a 5x8 gate. The doors can be swivelled inwards and outwards. Print the doors in STL orientation with three outer layers, 15-25% infill and support. — I…
Print approx. €0.45–€0.55 excl. taxPreliminary estimate for PETGSource material: PET
These are Lego-compatible doors. One left and one right door can be used together as a 5x8 gate. The doors can be swivelled inwards and outwards. Print the doors in STL orientation with three outer layers, 15-25% infill and support. — I…
Print approx. €0.40–€0.49 excl. taxPreliminary estimate for PETGSource material: PET
The holder is suitable for mounting a Lenovo T16 and a 16" monitor that can be folded back and forth on a shelf/window sill or table. The holder can be mounted on up to 21.5mm thick boards, tables or window sills (use the step file for…
Print approx. €13.33–€16.29 excl. taxPreliminary estimate for PETGSource material: PET
This is an XT60/banana plug adapter for chargers with large charging slots (72mm), such as the SKYRC MC3000. Crocodile clips can be connected to the adapter to charge individual rechargeable batteries at their solder lugs without the need…
Print approx. €1.02–€1.24 excl. taxPreliminary estimate for PETGSource material: PET
This is a remix of the excellent headphone holder from @LayerCake for sliding onto a 5 mm wide panel. --- German description --- Das ist ein Remix des exzellenten Kopfhörerhalters von @LayerCake zum Aufschieben auf 5 mm breite Panele.
Print approx. €4.06–€4.96 excl. taxPreliminary estimate for PETGSource material: PET
Protected magnetic keys have asymmetric key ring holes and are quite long, so I made this foldable key holder especially for them. It holds four magnetic keys and both halves are connected with a M3 screw/nut. Since the keys do not rest…
Print approx. €0.81–€0.98 excl. taxPreliminary estimate for PETGSource material: PET
This is a bracket for mounting E27 lamp holders (40mm diameter) behind televisions or monitors with VESA 200 mounts (max. M6 screws). The angle can be adjusted in 30° steps. To do this, simply insert some 1.75 mm filament into the two…
Print approx. €4.07–€4.98 excl. taxPreliminary estimate for PETGSource material: PET
The mounting plate allows the excellent charger holder for the JOYCUBE Fischer e-bike charger from Wolf Flow/db1337 to be attached to a grid with M3 screws and nuts. Print the mounting plate in STL orientation in 0.2-0.3mm layer height…
Print approx. €0.49–€0.60 excl. taxPreliminary estimate for PETGSource material: PET
EN: The HAZET 810R bit or Inbus Flow 73424 bit ratched screwdrivers are some of the best screwdrivers with a silent and stepless ratchet. Nevertheless, I almost didn't buy the HAZET 810R because it doesn't have the very practical twirler…
Print approx. €0.81–€0.99 excl. taxPreliminary estimate for PETGSource material: PET
The children urgently needed a crab cage for their holiday to collect small crabs by the sea. Here is the result. The upper part with the sliding door can be printed in place using the Step or 3mf file. The holes have a 3.4mm diameter, so…
Print approx. €3.46–€4.23 excl. taxPreliminary estimate for PETGSource material: PET
The skid plate on my Bauknecht GSXK 5020 SD dishwasher broke, so I designed a compatible replacement. Apparently these skid plates fit also refrigerators, freezers and other appliances from many companies. Print in STL orientation at 0.2…
Print approx. €0.30–€0.37 excl. taxPreliminary estimate for PETGSource material: PET
These are three different shoehorn holders for mounting on 34mm tubes. Two M3x10 screws with a maximum head diameter of 5.5mm are required for mounting. The 27mm wide version in particular fits perfectly for a widely used strongly curved…
Print approx. €1.00–€1.23 excl. taxPreliminary estimate for PETGSource material: PET
This is a storm fitting for the cover plate of the storm protection at the bottom of Velux windows, compatible with the Velux original (cf. e.g. here or here ). Print the fitting in STL orientation with 0.2-0.3mm layer height, 4 outer…
Print approx. €0.32–€0.39 excl. taxPreliminary estimate for one variant
This is a replacement trim ring for the Taino Platinum 4+2 gas barbecue. The ring is placed on the knobs instead of the original chrome rings. I have printed the ring as a multi-material version with TPU on the inside and PETG on the…
Print approx. €0.40–€0.48 excl. taxPreliminary estimate for PETGSource material: PET
Kudos to Robert Schiele for the brilliant idea to design a lid for the Miele PowerDisk ! My first PETG prints in 100 and 100.5% scaling were unfortunately not a success. They were too tight and did not fit. Update 04/23/23: Then I scaled…
EN: Update Nov. 12th 2023: Following some suggestions, I have uploaded two further variants with 1 and 2mm higher brush slots. The 2mm higher version removes blobs from the nozzle and also the underside of the silicone sock quite well. As…
Update Nov. 3rd 2024: There is a new improved debris bucket remix (Prusa XL Bucket for 16.5mm wide nozzle brush.stl with 16.9mm cutout) Update Dec. 12th 2023: When using the nozzle adapter and if the snap-in lugs do not fit properly (then…
Update 25 October 2025: I have uploaded a step file of the standard back plate for your adjustments and ideas. Since the adhesive version of the back plates of the Xiaomi Aqara temperature / humidity / pressure or vibration sensors…
This shock absorber is compatible to the common Lego axles. The sliding piece is put on the axle together with the pressure springs and blocked at the top. There are two versions, each with a hole at the top and an axle cross at the…
EN: This is a print-in-place swivelling and rotating wall bracket compatible with the Xiaomi Aqara RTCGQ11LM motion sensor. The Xiaomi PIR attaches directly to the rotating base of this wall bracket, replacing the original battery cover.…
Since they are constantly getting lost and the children are sad, I have constructed two replacement arrows. They are compatible with the Lego Projectile Launcher (part number 15301) and fit into the rear handle end of a "Simba - Next…
Update Nov. 3rd 2024: Based on Genes comments, I have made a 1mm and a 2mm raised version. There is also a new improved debris bucket remix (Prusa XL Bucket for 11.6mm wide nozzle brush.stl with 12mm cutout). The excellent nozzle brush…
EN: These are remix variants of martonas excellent revision of my original debris bucket . His version improves my design as it can be printed without support and hooked firmly into the 3030 profiles. It also stabilises slot-in nozzle…
EN: This is a remix of Jacoza's comfy, thumb-supported Tomahawk Slingshot . Jacoza's design works with flat rubber bands. I needed a version for 5mm tubes and this is the result. In addition to the remix, the 3MF file also contains…
These simple PTFE tube couplers connect my drying boxes to the filament inlets of the 5 Prusa XL print heads. The large numbers help you to quickly find the correct inlets. Print the couplers in STL orientation with max. 0.15 layer…
Here is my design of a Beyblade compatible adapter plate, printable with as little support as possible. Any tips with a flat base can be mounted on it using an M3 screw and/or glue. The adapter is designed to work with 3-4 coils of a…
Prusa XL 3030 suitable folding spool holder with spring | 3030 Prusa XL 3030 kompatibler Klapp-Rollenhalter mit Feder
Just a 3D scanned peanut. — I would be very happy if you have as much fun with the things as I do. — If you like :-) Thank you very much!
EN: This is a Creality Sermoon S1 scan of an Egyptian souvenir of the falcon god Horus. The scan was created with 0.1 mm resolution and blue cross, parallel and single lasers. Unfortunately, even the original has poor resolution, as is…
This pen holder slides into the tablet side slot for the original Lenovo holder and fits pens up to 10.5 mm in diameter. I'm not sure if the Lenovo pens will fit as I use a compatible HP Active Pen. Print the holder in STL orientation…
EN: This is a simple six-pointed shuriken ninja throwing star. Print with three perimeters and higher filling, otherwise it is not stable enough and does not fly well. We have had good experiences with TPU in tough combat use ;-) — I…
EN: The Prusa XL with 5 print heads has unused 24V terminals in the centre PSU for connecting the module. I have installed a car fuse holder ( Aliexpress Search ) with a 2A fuse, as this is sufficient for my USB devices. The CKCS board (…
This is a spare / replacement disc that can be spit by the Spin Master 20061899- DreamWorks Dragons - Thunderdrum/Thornado (Amazon ID: B00DH2M6U0) — I would be very happy if you have as much fun with the things as I do. — If you like :-)…
EN: The Anti Oloid (also Polysomatoloid) was constructed in Fusion 360 according to the Makers Muse YouTube video . According to Wikipedia ( DE -translation, not EN ), the oloid ‘[…] is one of the few known solids that unroll over its…
These are replacement brackets for surface-mounted belt winders. The original brackets are riveted into the belt winder housing. There is one bracket with a small hole and one with a large hole and washer, depending on whether the rivet…
Since the adhesive version of the back plate of the Tuya temperature / humidity sensor (zigbee model TS0201 / MIR-TE100-TY) did not seem optimal in many places, I designed a compatible spare part for the back plate and based on this a…
Downward-facing stand for the Edifier R1280DB bookshelf speakers. The front bracket just fits between the speaker housing and the cover. — I would be very happy if you have as much fun with the things as I do. — If you like :-) Thank you…
EN: Update 02. November 2025: You can find a Helping Hands adapter that fits the turntable magnets perfectly here: https://www.printables.com/model/1468068-magnetic-3d-scanner-turntable-helping-hands-adapte . This is the magnetic upper…
This is a spare / replacement dart that can be shot by the Spin Master 6019879 - DreamWorks Dragons - Toothless/Night Strike (Amazon ID: B00C81Y78K) — I would be very happy if you have as much fun with the things as I do. — If you like…
For BMW motorbikes, there are unofficial smartphone holders with two USB charging ports that fit onto the original BMW navigation device holder and connect to the 12V power supply via the contact circuit board on the back. For these…
EN: The youngsters were of the opinion that a Picatinny quick release for the XSHOT Tripod was urgently needed. In order to be able to enjoy my well-earned rest again, I quickly put together this adapter remix for an M12x45 screw. Thanks…
EN: This is a Creality Sermoon S1 scan of a Laotian Buddha souvenir. The scan was created with 0.1 mm resolution and blue cross, parallel and single lasers. Unfortunately, the quality of the original is quite rough. — I would be very…
This holder for the HP Active Pen fits into the Kensington Lock of the HP Elite X2 G4. It fits quite tight and can additionally be secured with double sided adhesive tape. In my case, tape was not necessary as the holder is designed to…
EN: This is a Creality Sermoon S1 scan of a typical industrially baked bread roll from a supermarket in Germany. The scan was created with 0.2 mm resolution and blue cross, parallel and single lasers. I also did an infrared scan, but the…
EN: This is a latch remix to lock the mechanically locking container (size 100mm x 100mm) from JamesThePrinter with a padlock. The latch is simply installed instead of a standard "Outer Linkage 100"-latch and inserted into one of the four…
For BMW motorbikes, there are unofficial (Chinese?) smartphone holders with a Qi wireless charging coil and two USB charging ports that fit on the original BMW navigation device holder and connect to the 12V mains via the contact circuit…
EN: This is an Adderini slingshot arm for 5mm tubing. The tubing is threaded through the ends of the bowstring and through the arm, so that it only needs to be secured at the start and end with a grommet. This allows the length to be…
This is a pivot remix for a Ruixin Pro knife sharpener with 8mm rods and an M4 screw fastening with recessed nut. With the original I had the problem that the melt-in thread was pressed out when tightening. Print the parts in STL…
EN: If you find the mounting plates of the Midea Universal Bracket as abysmally ugly as I do, these models might help you. If you have not yet fitted the original mounting plate, here is an eye-pleasing curved alternative for double-sided…
These are two different spare / replacement darts (one large, one small and very close to the original) that can be shot by the Spin Master 6052276 - Dreamworks Dragons - Deathgripper (Amazon ID: B07JXTW43F) — I would be very happy if you…
After my suction cup glass broke I designed a replacement part. outer diameter: 30mm inner diameter: 22mm lip: 3mm — I would be very happy if you have as much fun with the things as I do. — If you like :-) Thank you very much! — German…
This is an yet untested anti-slip mat design for the Orbion 3D Space Mouse by Factotum_Res . The mat should simply be placed on the bottom of the base plate so that the knobs hold in the screw recesses and the reset button remains free.…
Zip tie attached hose adapter for the FX 4 Stage PCP Air Pump or the identical Gehmann M100 4-Kolben compressed air pump. The hose holder can also be mounted without a cable tie, but then it might slip. The adapter should fit all pumps…
Replacement case corner guard for tool box. Print in STL direction with support on the print bed and 4 perimeters. The original plastic rivets can still be used. — I would be very happy if you have as much fun with the things as I do. —…
Camping chairs often sink in sand or loose ground. Mine didn't have disc feet, so I made some that would work in sand and on uneven ground. The feet is pushed onto the existing rubber feet with a little force. It fits on rubber feet with…
EN: This is a STEP model of a BMW motorcycle key blank. I designed the key blank as accurately as possible based on a laser scan and various measurements. The central longitudinal grooves on both sides are the same for all keys, and the…
EN: This is a minimalist, custom-fit wall mount for the Panasonic ES-LV67 shaver. The mount is available in an adhesive or screw-on version. The shaver slides into the holder from above and is held securely in place. To achieve this, I…
EN: This is a magnetic Helping Hands adapter for my SMMT -compatible 30 cm scan plate . Simply screw the movable Helping Hands arms into the adapter, then glue the magnets (10x2) into the recesses and cover them flush with 10/6 mm scan…
EN: These are two 3D laser scans of a Panasonic ES-LV67 shaver using the Creality Sermoon S1 and Shining 3D Einstar Rockit 3D scanners. The scan on the left (green) is from the Sermoon S1 and the one on the right (orange) is from the…
This is a wall bracket for the multi switch socket Intertek GNB(6)KS06 (Conrad Electronic). The brackets are fixed with countersunk screws (4mm diameter). Mounting: For mounting, first screw the lower bracket to the wall, insert the…
These are Lego-compatible doors, optionally decorated with a pirate skull. One left and one right door can be used together as a 5x8 gate. The doors can be swivelled inwards and outwards. Print the doors in STL orientation with three…
EN: This is a Creality Sermoon S1 scan of a chestnut. The scan was created with a resolution of 0.2 mm and blue cross, parallel and single lasers. I also did an infrared scan. — I would be very happy if you have as much fun with the…
EN: This is an adapter for the Midea Porta Split Universal Bracket for flat pitched roofs. The adapter enables installation on the frame of a Velux GGL roof window. It should fit if the universal bracket rests on the window frame and roof…
EN: These are two 3D laser scans of a carved East African candle holder, made with the Creality Sermoon S1 and Shining 3D Einstar Rockit 3D scanners. Both were scanned with 0.1 mm resolution and standard settings. Both scans have 1…
EN: Update 03-14-26: The solar panels I used probably only lasted two years due to inadequate sealing and rear ventilation. I made a new, adjustable, rear-ventilated version for flexible 12V solar panels. Since the original Velux…
EN: This is a belt clip for a Zelda Link Master toy sword. I printed it in place with PETG without support and used a cutter to make the hinge movable and open the screw side. To attach it, simply fold the belt clip around the sword…
These are compression end caps for tents or other rolled things with a diameter of about 20 cm (7.9 inch). The caps are put on both sides of the tent roll and fixed with 25 mm (1 inch) wide straps. I use them for safe transport of a tent…
This adapter can be used to mount a WeatherFlow Tempest weather system on horizontal pipes up to 45mm in diameter using a pipe clamp. In addition to the adapter, a suitable pipe clamp and an M8 threaded rod as well as an M8 nut and a…
This is a Vesa 75x75mm monitor mount that can be hooked into the tool holder ("crows nest") of a Dremel 220 workstation. Use short M3x6 screws with a maximum head size of 5.5mm to mount the monitor. Depending on the weight of the monitor,…
The labels can be clicked onto various holding plates and used as filament clips. I label the labels in the Prusaslicer with the manufacturer, material, colour, production tolerance, price, date of purchase and use the filament described…
EN: This is a Creality Sermoon S1 laser scan of a Braeburn apple from New Zealand. The apple was scanned with standard settings at a resolution of 0.2 mm using cross, parallel and single lasers. — I would be very happy if you have as much…
This is a plug-in mount for the square Xiaomi Aquara sensors (e.g. WSDCGQ11LM or DJT11LM). The sensor holder consists of two parts and can be printed without support. To mount, simply push the plug through the holder into the hexagonal…
EN: This is a sideways sliding cover for 20-23mm (1/2inch) pipe clamps. The clamp must be fully closed for the cover to fit. I have printed it from UV resistant TPU. In the 3MF project file you will also find a mirrored version to slide…
