Counting matching models…
My neighbor was redoing their house and tasked me with designing a bunch of Ubiquiti adapter/mounting plates. This is one of them… For use with the smaller Ubiquiti AP's. Requires support to print and may need sanding depending on how…
Didnt like any of the front extensions available at the time I got my case so I decided to design my own. Full part and cut parts included so you can print depending on your bed size. If I could've, I would've done a one piece print but…
Backpack for V2.4 or Trident converted to a tool changer. Based around the BTT CEB and a Power distribution board. Intended to be mounted via VHB tape to the back panel. Stealthchanger logo added since I am basing my conversion around SC.…
EBB36 Mount with CNLinko Adapter for Orbiter 2.0 and G2SA. Solidworks file posted if you wish to make some changes. Needs (5) M3 heatset inserts. I've installed this is my Micron and Trizero and havent had any clearance issues.
2020 Mount for BTT SFS 2.0. Designed for 3mm foam, 3mm panels and insulation on outside of panels.
1515 Extrusion Mount for OV5640 5MP USB Cam Designed around the Micron+ (180x180x180) and to be mounted on the top rear extrusion to view the whole bed.…
Need some simple frame mounts for chamber thermistors based around 3mm thermistors that most people use for chambers. Made versions for both 1515 and 2020 based frames. I've provided the or
Rear faceplate with DP and HDMI as requested on Reddit. Category: Other
Door Hinges with greater surface area for attaching panels via VHB. M5x50 bolts, M5 spacers (10mm long - (2) per hinge) and an M5 threaded insert for the hinge hardware. Very smooth swinging door. Opens approx. 225 degrees.
Kept breaking the clips and decided to add more material and (2) M2x6 screws to support the clip
Redesign this part ( https://www.thingiverse.com/thing:5427275 ) from scratch so that it flush with the fan housing. Category: 3D Printer Parts
I wasn't a fan of the available PCB mounts and strain relief options for the O2S Toolboard and Orbiter so I made this when putting together my custom sidepack crucible printer. Simple and works well. I've provided the original solidworks…
Remixed the front left panel for a panel mount USB for routing to my Pi. Will be used when using input shaper via a pi pico/adxl set up. This is for the 300x300 Voron 2.4 R2 build. Just started printing parts. Will update the post with…
Modified the top fan shroud and bottom fan mount. Either mount the fan low or high in your +50. Extended fan shroud uses stock base and top mounts. Extended base uses stock shroud and top mounts.
BTT Smart Filament Sensor (SFS 2.0) - 1515 Extrusion Mount
Front and Rear Feet for SSUPD Meshilicious that holds (2) Displayport adapters and (1) HDMI Adapter
Converting a lot of my printer to metal parts because metal is, well metal…. So while this carriage is designed around beacon probe it also has mounting points for omron induction probe, klicky mount, etc… Link below for the carriage off…
Putting together my ERCF V2 and the uncovered selector drive pulley bothered me more than it should so I made a lil chef's het cover/knob. Didn't feel like adding the Voron logo, as there's plenty of logos all over my printer already but…
Made the opening to pass the wires for the hotend and thermistor through the part body larger so you dont need to depin the connectors or snip and put on new connectors. Its a TIGHTTT fight but both stock microfit connectors can pass…
Revised to account for rear belted Z in lieu of lead screw Will post photos of it installed once my part arrive and I complete the build.
Modified the Orbiter 2.0 Version to fit a Mellow Fly Halo. Depending on your printer calibration this will either be a press fit or will be slightly loose. If slightly loose, I used some mounting putty and tweezers to make it a snug fit.…
The bed that came with my micron has rear “fingers” like my voron. So I modeled up so quick bed alignment tabs to match my voron.
Did like the solutions available for one large slim fan that just sits on the spine that separate the case. Came up with this mount for (2) 60mm fans that sits above the motherboard side. Secured in place with one screw.
Wanted a nice clean solution for mounting an actual antenna for the CM4 on my Micron. Originally had a skirt mounted solution but it had two flaws: 1. Only worked with Micron R0 skirts 2. Every now and then the antenna would get snagged…
In the process of building my Micron+ I realized the Zero Filter which works with the original (120x120) Micron does not fit the Micron+ with a 180x180 bed. So I took inspiration from the printed parts in front of me and made this. Zero…
120mm GPU side fan mounts for the SSUPD Meshilicious Category: Other
Adapter for (2) part cooling fans. For use with NON Max versions of EBB36.
Saw all the different IO mounts for the SSUPD Meshilicious and want something just slight different. Originally design it with (3) DisplayPort opening but due to the GPU support bracket that comes with the case I couldn't get the third…
Remixed to work with 750g rolls from 3DXTech. Use the caps from the original model.
Designed a mount for storing my surface against the inside wall of my desk for easy access. This mount is for a surface with toughbook cover and thin "folio" style keyboard. Tight fit is intended to avoid the surface leaning in either…
Revised the rear separator for a PG7 umbilical and also to extend chamber wiring past the belt paths.
1515 Corner Mount for Mellow Fly Halo
I REALLY hate the stock micron door hinges, they just never worked for me. Broke a few and the ones that didnt, just never held the door on. The door would always end up sagging from the small area provided for VHB to adhere the hinge to…
Single and Dual switch skirt pieces for the right side
Need a small wall mounted holder for the different tips that came w/ a WaterPik I got, so I threw this together real quick and mounted it to the wall with some double sides adhesive mounting pads. If you have more tips than this, you can…
Voltmeter for monitoring PSU voltage. Based on using these simple voltage displays (https://www.amazon.com/gp/product/B08RYPRZFF/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1)
Created these insert panels with hex pattern and micron logo because I didn't feel like buying acrylic panels for my top. I think these looks better than acrylic, lets see how they perform thermally though. I also lined the inside of…
In the process of converting my 2.4 into a toolchanger and decided I wanted some more flare. Designed this LED sign of the Stealthchanger logo for tool changers with top hats. Designed around logo being centered in 200mm tophat. There are…
I made this simple teepee to prevent your windshield wiper blades from freezing to your windshield without standing your wiper up vertically. I've always hated the idea of standing your windshield wipers up vertically when it snows, I…
A simple and sturdy mount using existing holes in the SSUPD Meshroom S V2 to more securely hold an Asus 5090 Astral in the case. The PCIE extender is mounted but using lower mounting points, with the 10mm standoffs and is a slightly angle…
Need something simple for holding my dogs poop bags on a fridge near our back door. 5mm steel rod (65mm long) gets inserted into the “arm” for strength. Put a little grease on the rod to help insert easily all the way. Threaded insert and…
Hand therapy peg board that's mostly printed. The only non-printed parts a 5mm steel rods, that should be cut to 118mm long. If you buy them at 120mm or 125mm, thats fine you dont need to cut them, some rod will just stick out from the…
Revised the front skirts for a +50 to extend to the side of a TFT50 and provide LED's in the skirt.
Separator for the rear electronics with (2) M12 glands and thermistor mount
I recently broke a couple of original hex drivers and the new replacement drivers I got didn't have an endcap on them and that made them somewhat uncomfortable to use, so I threw together these quick and simple models so it sits in your…
When I was in therapy after both of my wrist surgeries, often I would find myself waiting for someone else to finish with the gripper my therapist had. I got fed up with waiting around for it to be available for use and designed this…
I needed a simple adapter plate for using an SSR DIN clip to mount a Mellow Fly DP5 controller board on a DIN Rail for my TinyT build, so I threw this together real quick. Also, including the fan mounting plate. I've provided the original…
A simple mount for mounting a PiTFT43 to a printer with 2020 extrusions. I originally made this for my TinyT. Thank you for interest in my model!
I recently water-cooled my PC in a meshroom V2 in a dual rad setup and even with slim fans on the side rad the clearance between the GPU blocks and the slim fans wasn't great, it was definitely enough for air to flow and move but the slim…
Made this little magnetic calendar to help keep track of if Ive given my little pup his heartgard each month. I also added Generic “Dog Med” and “Cat Med” Tracker Calendars for use with other meds that aren't Heartgard. For the calendars,…
Per a user request, I alter the base mounting plate from my original design to work with a Hextrudort CNC Low Extruder Requires (5) M3 Heatset inserts and (3) M3x8 screws to attach the CNLinko Arm to the Extruder Mounting Plate. Spacers…
Modified the left mesh skirt piece for 300mm 2.4's for use with an EM stop button . This is the EM stop I used and designed around. https://www.amazon.com/gp/product/B07WTL3KPB/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Bought a digital microscope (link to the exact model below) to use for inspecting Pokemon cards for grading, repairing fine solder joins on various PCB's ranging from 3D printer control boards to other various PCBs in need of minor…
Slightly modified from the stock Stealth Changer design to accommodate X end stop location per my mounts endstop location. The depressing face was extended ~2-3mm with other small geometry changes.
I wanted a simple, small and easy to install gantry mounted x endstop solution for V2.4's that cant run a toolhead mounted x endstop either because you are running a tool changer or for whatever other reason. Simply unscrew the bottom…
Revised the original model to use M10 bowden couplers in lieu of ECAS bowden couplers and piano wire for umbilical support in lieu of 1/4" spring steel. Still uses aviation connectors for the umbilical plugs. Also, added spots for…
I wanted a portable master klipper controller for my printers so I designed this around a BTT PiTFT70, Pi4b & a 18650 based Pi UPS. During the design process I luckily stumbled across the below video detailing exactly how I wanted to set…
I needed a simple and sturdy desiccant box with specific dimensions to fit within existing storage solutions to maintain and remove humidity from the storage containers they would be placed in. I was having issues with ones already…
I needed a simple Z umbilical retaining plate for my Voron V2.4 during its Stealth Changer conversion so I threw this together quickly. ***I USE 20MM BED STANDOFFS*** due to using a chamber heater, so I needed to raise my bed some, so my…
Recently installed Vitalli3D's CNC live idlers on my V2.4 during its Stealthchanger conversion and needed a simple/small y end-stop depressor since the new parts sat just below the y end-stop mounted to the top of my CNC motor mounts.…
A small and simple 2020 extrusion mount for an OV5640 camera to be mounted just below the docks on the buffer crossbar. Uses (3) M2x6 self tapping screws to secure the camera to the mount. Two mount options are provided with a slight…
*** USE AT YOUR OWN RISK*** Printed adapter to use a 12032 fan combined with a PTC chamber heater for chamber heating
These are all currently available results.
