Counting matching models…
Useful for finding the right distance of the Super PINDA from the print bed. The optimal distance for the Super PINDA is about 1.5mm. That should get your optimal Live Z/first layer calibration to somewhere around -1.00, so you'll have…
Print approx. €0.42–€0.52 excl. taxPreliminary estimate for one variant
This is just a simple rescale of the original for use with tablets. I liked misterT's remix of jonnig's phone stand , especially the stronger front hinges, which tend to break easily in the original. But the "medium" version is too small…
Print approx. €3.39–€4.14 excl. taxPreliminary estimate for one variant
I train dogs for canine nose work and retriever field work, and have a collection of long lines and leashes of various length. For a while I have tried to find a way to organize them a bit better than just throwing them all in a bag --…
Print approx. €2.79–€3.41 excl. taxPreliminary estimate for PETGSource material: PET
The MK3S's stock spool holder works actually really well. Yet, I like spongybob1958's TUSH2 design and use this kind of spool holder with all my other printers, so I remixed it for the MK3S. In reality, it's more of a reimplementation in…
Print approx. €1.41–€1.73 excl. taxPreliminary estimate for PETGSource material: PET
I saw geodesign's grid and canals for Takenoko and really liked the models (maybe because just the day before we'd managed to accidentally knock over our elaborate tile layout ☹). However, I really wanted single tile holders, not triples.…
Print approx. €0.55–€0.68 excl. taxPreliminary estimate for one variant
Technically not a remix but a re-implementation from scratch in Fusion 360 but directly guided by agarajag's design . I liked it but I wanted to add a small tray for paperclips, and I took off some of the superfluous material on top.…
Print approx. €14.77–€18.06 excl. taxPreliminary estimate for one variant
This is a replacement for the stock LCD cover of the Mk3S, with the words Original Prusa in a different color. No MMU is required, only less than a handful of manual filament changes. UPDATE 6/28/2021: Updated with R7 version of the LCD…
Print approx. €3.16–€3.86 excl. taxPreliminary estimate for PETGSource material: PET
I recently built the LACK enclosure for my Prusa Mk3S. I like it but I hate the fiddling required to put spools of filament onto the included filament holders. So I decided to make a new remix of the spool holders I use for all my other…
Print approx. €2.35–€2.88 excl. taxPreliminary estimate for one variant
I used to use @OneTrueMyth's Deluxe Tool Caddy for my Prusa Mk3S. Recently I put it into a LACK enclosure, which isn't large enough to hold the tool caddy. Perusing the usual sites, almost all tool caddy models for the LACK enclosure…
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for one variant
Here's a stab at creating the Ghost Falcons and the Twilight Archon for the Aesther Diviner class in Gloomhaven. To be honest, I don't have the faintest idea what a "twilight archon" is supposed to be or what it's supposed to look like…
Print approx. €2.05–€2.51 excl. taxPreliminary estimate for one variant
Wife needed cute buttons for a bunny-shaped baby jacket for our grandchild. 3D printer to the rescue! It is based on the carrot by LCDodson on Tinkercad: https://www.tinkercad.com/things/1dtvZ5KBdAn-carrot Print instructions Resolution:…
Print approx. €0.20–€0.24 excl. taxPreliminary estimate for PETGSource material: PET
Pollen season! My son asked me to make a key fob to hold his nasal spray, so here it is. Obviously, there's no size standard for nasal sprays :-) This container is sized for bottles up to 24 mm in diameter and 60 mm high. Fusion 360…
Print approx. €3.02–€3.69 excl. taxPreliminary estimate for one variant
Designed for the Cuisinart FP-12. Will hold the slicing and shredding discs and either one of the two chopping blades (keep the second one in the bowl). Okay, no space for the dough blade -- because I've lost mine. Print instructions I've…
Print approx. €9.55–€11.68 excl. taxPreliminary estimate for PETGSource material: PET
Here's an organizer for the base game of 5-Minute Dungeon, for use with sleeved cards. (For base game + expansion see grzlus' https://www.thingiverse.com/thing:3865509 ) The game comes in a weird box, with lots of empty space and a…
Print approx. €7.86–€9.60 excl. taxPreliminary estimate for one variant
I use standee bases with slots for status indicators (e.g, https://www.prusaprinters.org/prints/31390-gloomhaven-standee-base-with-health-counter or https://www.thingiverse.com/thing:3133406 ) and the edges of the cardboard tokens that go…
Print approx. €0.37–€0.46 excl. taxPreliminary estimate for one variant
I recently printed OneTrueMyth's Tool Caddy for my Prusa Mk3S and liked it a lot. Then I glanced over at my trusted Wanhao i3 and thought "mmh, this may actually look pretty good on the i3 too." So an hour later, the tool caddy was outfit…
Print approx. €10.70–€13.08 excl. taxPreliminary estimate for one variant
Remix of Tronnic's bridging tower, with the temperatures from highest on the bottom to lowest on the top. This way, you shouldn't experience clogging issues if the lowest temperature is not enough to properly melt the filament. Many…
Customized version of https://www.thingiverse.com/thing:2404850 , with added labels on top, to show the grit of sandpaper used. They go from 80 to 3000. If your sandpaper is a different grit, there's a blank top template provided. With…
Interested in a 3D printed model of a QR code to give guests access to your home network that is protected by a 25-letter password of random characters? Or point your home/pet sitter to a web page with all relevant information for their…
Print-in-place model to hold button-style or cylindrical batteries. Some example models are included, and the OpenSCAD source code is provided, for full customization. Instructions below are for button-style batteries. The version for…
Update 9-11-2022: Added a version for 0.8mm nozzles. Tick marks of the old version didn't print correctly with a 0.8mm nozzle. Update 1-20-2022: Added a PDF file with a template, to write down the Live Z values used in the calibration.…
Update: v1.9.6 10-10-25: Test cutouts on the backside are back! Somewhere around v1.8 I left a “*” character in the code while debugging that made them disappear. My “Improved All-In-One Temperature and Bridging Tower” is very popular but…
Update 10-1-2024: Added “offset” tiers, to stagger the location of bottles (as suggested by @Xellixor on Thingiverse). New version 3 with screw-based, more robust locking mechanism is now available on the Prusa Store . Version 2 is and…
I was trying to accessorize a library-themed book nook ( https://cults3d.com/en/3d-model/art/una-pequena-libreria-para-decorar-tu-libreria ) with a stack of books. I found this design of a book on Tinkercad and remixed it. I've included…
Last night I had to readjust the Super PINDA on one of my printers. I found a bunch of height gauges for the old PINDA/MINDA on prusaprinters.org, with a height of 1-1.2 mm: https://www.prusaprinters.org/prints/27679…
Update 11/22/25: Adjusted blade pocket size of 65 degrees version from 15 to 14 mm, avoid filament not getting cut properly. A long time ago I discovered pomi's filament cutter but wouldn't want to use it without a box a la wapameeto's .…
Most of the time I use a Wyze cam to monitor print jobs ( mount ) but I also want a close-up view of the nozzle, for troubleshooting. I have tried a few of the various Pi cam mounts for the Mk3S but they were either bed, not x-axis,…
Folks have created stands and cutting guides for my sanding sticks https://www.printables.com/model/22236/ but I wanted a version that integrates the cutting guide into the stand. So here it is. I also include a version for standard US…
An organizer for money bills and coins, with variants for different currencies. Update 01-16-2024: New versions with integrated coin storage, for different currencies. This started when my son asked me to print a holder for dollar bills,…
I saw GeekinTexas' model on Thingiverse (which is in turn a remix of 3dxia's design , who is on Printables as igoravg98 ) and immediately realized that it's an “upgrade” no owner of 3D printers can afford to be without 🙂 However, I didn't…
LCD knobs for CORE One(+), Mk4(S)/Mk3.5(S), XL, Mk3S, and Minis, with optional accent color ring. Fusion 360 file provided. Update 11-13-2024: Added MMU version. I was a fan of @bogdanko's display knob for a long time, but the advent of…
I used to use @BaGooN's fantastic hotend fan guard on all my Mk3S printers. Better than any other fan guard I've tried, so naturally I wanted one on the CORE One(+) and Mk4 too. Here it is, with added openings for the two screws that hold…
What do we love most about our dogs? Their tails, of course! So here's a couple of wall-mounted holders that leverage the power of the dog tail to hold leashes or other dog paraphernalia. This is not an original design but influenced by a…
I liked @karelv's case mount but a) it doesn't work for a Raspi 3 B+ and b) I wanted the USB cable to go out toward the back. So I took its rail mount system and attached it to @Malolo's base , using the slit design version. The only…
This adds a power switch to my Mini+ LCD Case with USB . Both USB port and power switch can now be reached easily from the front of the printer. It is fully compatible with @4nthonylin's excellent back cover . ——— Update 7/29/2021: Added…
An insert in the same style as my organizer for The Crew: The Quest for Planet Nine . Update 1-12-2023 : New version of submarine. Now prints as one piece, no supports needed! Features include: Holds sleeved or unsleeved cards. Token…
I like my Prusa XL tool changer but don't care for the spool holders they included. This is a remix of @hugoG_253127's “Filler” filament holder to work with the hardware provided with the XL. By using 608 ball bearings, friction is…
Most filament guides I found were just plastic conduits through the lid, and in my experience the filament scratching across the plastic gets amplified like crazy by the enclosure. So I came up with this idea of running a PTFE tube…
I use it for a DeWalt tape measure but should work for any tape measure 85mm x 50mm or less in size. Designed for pegboards with 1'' spacing. Use supports as per attached .3mf. If you like what I'm doing… … consider buying me a coffee or…
This is not the first organizer for Cascadia but I wanted a design that works with tjdesign's excellent pinecone tokens and tree stump , so, here it is. Sized for sleeved (Mayday MDG-7100 70 x 120mm Premium) or unsleeved cards. Update Oct…
Here's a straightforward tripod stand for use with a Wyze camera. I used to use it to monitor prints on my Monoprice Voxel/Flashforge Adventurer (when I still had it). The legs are adapted from brianN's…
Trying to organize my shipping station a bit better. This stand moves the printer off the desk and adds a removable, locking tray for the paper. The stand is sized to provide space for square Post-It notes. If you don't want the space for…
UPDATE 3/14/2023: Fixed error in cauldron STL file (thank you, @marco). Updated 3mf files with better support settings. Here is a set of upgrades for various tokens in Quacks of Quedlinburg: flame, droplets, scoring markers (cauldrons),…
For two children's toothbrushes plus toothpaste. Should scale easily. Print and Assembly See 3mf files for suggested settings. Two copies of ears and buttons needed. Glue Ear pt1 and Ear p2 together, then glue to Main. Glue Left Foot,…
I've been using @Maker Mashup's nozzle brush for a while, and recently I saw @Extra Fox's remix of it. I liked the smaller size of the head but I didn't care for the repositioning of the handle to the side or the rounded handle that lost…
Continuity Camera is a great new feature for the iPhone, allowing you to use your phone as a webcam with super picture quality. Here's a universal phone mount to use your iPhone and Continuity Camera with any external monitor. The monitor…
Signs for Original Prusa Mk4(S), Original Prusa Mk3.9(S), Original Prusa Mk3.5(S), Original Prusa Mk3S, Original Prusa Mk3S+, Original Prusa Mini, and Original Prusa Mini+. Also a sign for the Mk4S+MMU3. Mount them to your enclosure by…
The Crew: The Quest for Planet Nine is an addictive collaborative trick-taking game. There are a couple of other nice organizers available but this one was designed to support a few "improvements": Sleeved cards Token cases to protect the…
I designed this as a replacement for the lame cardboard start player marker in Lost Ruins of Arnak. For my Moon Staff upgrade, see https://www.printables.com/model/374337 . It's a multi-part model, none requires supports. You can also get…
A Montessori-style puzzle toy to help toddlers develop and hone their hand-eye coordination skills. No sharp corners. I printed the parts with a 0.6mm nozzle and 0.3mm layer height but a 0.4mm nozzle will of course work fine too. I did…
I like @extrutim's cable strap but found that straps printed with PLA and PETG broke easily after a few open-and-closes of the latch. On the other hand, TPU straps have worked fine for me. Alas, I found it basically impossible to push a…
I liked FFFTechnology's clever little vise but kept being confused by the need to turn the screw counter-clockwise to tighten the jaws. "Righty tighty, lefty loosy" -- not so much. So here's my super simple modification: I just mirrored…
Simple tray for your pegboard (1 inch spacing) to hold filament clips or similar small items such as print nozzles. V2: Improved pegs Print instructions Supports: Yes Resolution: 0.2 Infill: 15% If you like what I'm doing… … consider…
A set of card dividers, to make the large deck of cards that comes with Lord of the Rings: Journeys in Middle Earth more manageable. Sized for sleeved cards. Ideally used with a card organizer such as @merkli's fantastic…
This is a game box for the game Guillotine , a super filler game and a lot of fun after a beer or five. The box itself is comprised of a bottom and a lid. The bottom has a slot for the guillotine that indicates the end of the line where…
I couldn't find a complete set of summons for the Beast Tyrant so I created it from various models I found around the interwebs, with some smaller or larger modifications. I also fixed a few errors in those models by running them through…
This is designed for 1-inch standard pegboards. UPDATE 1-29-22: Added version for SAE units: 5/32 to 7/16. I was looking for a way to mount my mini wrenches. There are plenty of STLs for pegboard wrench holders around but I wanted to…
Create more space in your closet — by connecting clothes hangers. Small and large version. Not my idea. Wife saw something like this on Facebook and described it to me. Fusion 360 did the rest. Easy print. Designed to be printed with 3…
August 2025: Updated with new layout I've used this kind of tool caddy forever, with versions for LACK enclosures and Prusa Core One . It has enough space for all the tools that come with the XL, and then some: The version for the…
These are cases to protect the cardboard tokens in The Crew: The Quest for Planet Nine. They were designed using my custom cases OpenSCAD Customizer script: https://www.thingiverse.com/thing:4160162 . I usually print them in…
Wife's newly knitted baby sweater required some strawberry buttons. Found this nice free SVG https://www.iconfinder.com/icons/3316501/fruit_morango_strawberries_strawberry_icon, and after a bit of work in Fusion 360, the buttons were…
Someone on BoardGameGeek asked for a tray to pass the four quests at Cliffwatch Inn around the table, so everyone can read them more easily. Here's my stab at it. Designed for sleeved cards but should of course work for unsleeved cards as…
Changing nozzles frequently? Not quite sure which nozzle is currently in which printer? Here's a straightforward indicator for nozzle size and material. Update 12/7/23: Added an (untested) remix with three wheels, for nozzle type…
Ryankinnaman's very thematic resource trays look great on the game board. This is a super simple resizing to make them fit into Fabmaszter's excellent organizer. If you like what I'm doing… … consider buying me a coffee or joining my Club .
Update 12/19/22: Added version for 3-prong plugs (NEMA 5-15) Update 12/19/22: Added version for plugs with a larger neutral blade (polarized plug). My new laptop travel charger cable came with a prong protector but I kept misplacing it.…
Based on the warrior meeple in behlers' Lords of Waterdeep meeple models . I remixed it to add a viking helmet. The meeple is 19mm in height. I use these vikings to replace the black, white, and gray meeples in Raiders of the North Sea .…
Replacement for the Prusa Mk3(S/S+) y-belt idler, to allow easier adjustment of the belt tension. Boogie improved on his original design of a y-belt tensioner by requiring only 2 screws for tightening but for some reason replaced the M3…
Originally designed as a replacement for cardboard tokens in the game Farlight, they're great for any game that features astronauts, such as Arcs's agents. Update 01-14-2025: Added multicolor version Original size 18mm, but can easily be…
I've tried a few toothbrush covers on Thingiverse for my Oral-B CrossAction travel toothbrush but they were either unnecessarily complicated two piece models that seemed prone to break easily or didn't fit well, until I hit on…
I've tried a boatload of cable organizer models but the one by rog0978 works the best for me, in general. This is a slim-lined version of it, reimplemented in Fusion 360. It feels smaller and uses less material. Two versions, small and…
Update 11-25-22: EXPERIMENTAL. OpenSCAD script to easily generate customized elves. A simple but PERSONALIZED Christmas ornament! No MMU required for multiple color print. To customize the elves/santas and the banner, there's a few…
An organizer for the game Forgotten Waters . Sized for cards with or without sleeves. Print Instructions Print with 0.4 or 0.6 mm nozzle, 0.3 mm layer height, 15% gyroid infill, no supports. I strongly recommend using a brim for the…
Great little bin. I happened to have a bunch of 14mm x 1 mm magnets lying around, so I did a quick remix for that size. In my hands, magnets seem to vary quite a bit in actual size, even within one batch. The holes are sized for…
The object permanence box is often found in the Montessori infant/toddler environment. It is introduced to children when they are old enough to sit up without assistance, generally around 8–12 months of age. The direct aim of the material…
I tried to print @damke's fuzzy Halloween spider but its web had a lot of issues, plus the web didn't always connected properly to the spider. In this remix, spider and web are separate components. I used the web from @FiveNights' design…
I was trying to accessorize a library-themed book nook ( https://cults3d.com/en/3d-model/art/una-pequena-libreria-para-decorar-tu-libreria ) but couldn't find any models of a library ladder, so I put this simple one together. Print…
I like the TUSH2 spool holder design but found the included spool holder too flimsy and tight-fitting for some spools. Broke 3 prints within minutes trying to squeeze them into the holes of the base. So I quickly drew up something that…
A sci-fi themed book nook. Two versions, one is designed for added lighting. Base, left, and right wall are shared. The version for added lighting has a back wall with a cutout for a wire, and the sun is a separate model, open on the…
Lost Ruins of Arnak is a fun game but I have no clue why half of the game materials are amazing (arrows, jewels, tablets) and the other half is trash. Thanks to Virral for his great replacements for the cheap resource card board tokens .…
A pegboard holder for square bottles. I use it for isopropyl alcohol, for cleaning the print bed. It's designed for bottles with sides of 63 mm (2.5 inches) and standard US pegboards of 1 inch spacing. Print instructions Resolution: 0.2…
This simple hinge converts the two-sided door of the LACK enclosure into a one-sided folding door. There are other solutions around (such as https://www.prusaprinters.org/prints/23970-prusa-lack-enclosure-sliding-doors or…
I’ve tried many of the Gloomhaven standee base designs and liked the one by JimmerJammer by far the best. However, I also really liked the slots for effect tokens I saw in thetruenelson’s design . Well, why not have the best of both…
If you've already pimped your copy of Castle Panic with towers and walls (eg https://www.thingiverse.com/thing:291466 ), this one's for you: A simple replacement for the cardboard Tar Token in the base game. Print instructions Resolution:…
There are quite a few organizers for Codenames and Codenames Duet around. I printed a couple of them just to find that they can't hold the thick agent cards in my edition of the game. Plus, I have the MeepleSource meeples that replace the…
Organizer for Mountain Goats, including 6th player expansion. I liked @ tjdesign 's variant of https://www.thingiverse.com/thing:4688580, with the bonus point tokens separated from the point tokens, and the point tokens also neatly…
@tjdesign's Magic Magnet Tool is super useful to avoid messing up the polarity of embedded magnets in your models. However, I didn't see why the model needed four different pieces. So I re-implemented it in Fusion but built the thread…
I was trying to accessorize a library-themed book nook ( https://cults3d.com/en/3d-model/art/una-pequena-libreria-para-decorar-tu-libreria ) but couldn't find any models of a library footstool, so I put this simple one together. Print…
Wish Man's (or Woman's) Best Friend could scratch your back? This back scratcher requires a lot less training! It's scaled to work with a 3/8'' (9.5mm) dowel, cut to size. 3MF files with settings for the paw (PETG) and the handle (TPU)…
There are plenty of holders for Prusa Mini steel sheets around, but most of them are stand-on-your-desk or mount-on-the-wall types. I was looking for something I could mount on the side wall of my LACK enclosure. This is what I came up…
On my quest for a good way to feed my LACK-housed Mk4S/MMU3 from RepRack-mounted filament spools above, I looked at a number of alternatives to Prusa's spool buffer, which doesn't really work great with my setup. Among other things, I…
Step 7 in the XL Prusa nozzle swap procedure https://help.prusa3d.com/guide/how-to-replace-the-prusa-nozzle-xl_405846 is plain stupid. A simple hole in the x-carriage-cover part allows loosening the grub screw of the extruder that holds…
I recently got a DJI Mavic Mini drone, with the Fly More combo. I don't need all the cables, replacement rotors, and spare controller knobs in the carrying case, so I built this simple box to store that stuff. Design was very much…
This is a new version of my previous design , allowing you to personalize it! What do we love most about our dogs? Their tails, of course! So here's a wall-mounted holder that leverages the power of the dog tail to hold leashes or other…
I didn't like any of the inserts/card trays for Exploding Kittens, with the exception of https://www.thingiverse.com/thing:1957634 , which itself is a remix of https://www.thingiverse.com/thing:854289 . But it's too small, and the tray…
Camel Up is a fun game for a large group, but let's admit it, the quality of the game components is pitiful. Plain cardboard. Here's a replacement for the camera in Camel Up: Super Cup. There are two options for the tripod (adapted from…
I am not a fan of the Prusa XL's spool holders. Instead, I'm using a filament feed from a RepRack system mounted above the printer. But I needed a way to attach the PTFE tube to the RepRack. Here is what I came up with. Fusion 360 f3d and…
With my son over for Thanksgiving, we pulled out Castle Panic, one of the games we used to play a lot when he was a kid. We had a blast but Tawnos76's great towers and walls kept getting knocked around. I ended up remixing the parts by…
Most of the time, I use my laptop with a separate keyboard and mouse and the laptop tucked away in a corner of my desk, with the lid closed. I recently bought a Kensington USB fingerprint reader, and while it works great it's awkward to…
I liked Tate's remix of the Prusa Mk3S steel sheet holder but wanted to mount it on my pegboard. So here's a version with pegs sized for standard US 1'' pegboards, plus versions for 3 and 4 sheets. UPDATE 07-31-26 : Added version for Core…
I needed a place to mount my PrintDry Pro filament dryer. I like the RepRack wall attachment system and use it to feed printers, so I adopted the basic design to create a generic set of brackets for cut-to-size boards. Requires large…
