Counting matching models…
Enclosure for LCD 1602 screen driven by a ESP32 DOIT DevKit v1 with a DS3232RTC I2C Real Time Clock module Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: .2 Infill: 15 Filament: Prusament PLA PLA…
This model is for a single gang outlook box. Included is the Fusion 360 source file (.fd3) used to create this model. All dimensions are defined as parameters so you can change them if you like. However, by default, the outside dimensions…
Here is a case for a Lilygo T-Display S3 (without header pins) Files include: .STL + Fusion 360 source (.fd3) + Prusa Slicer .3mf file case was made in support of this project: https://rlatour.com/cpumonitorjr/ Hope it will be of use to…
IMPORTANT NOTE: If your battery's terminal(s) / terminal wire(s) get hot you need to ensure the printing material you use for this design will suffice. The included GCODE files assume the use of PTEG. This battery terminal cover is a two…
Designed for project described here: https://hackaday.io/project/166985-wol-with-google-homealexa-ifttt-esp32-poe-iso note: this is for an older version of the ESP32 POE ISO board (Revision B) and it does not fit the current version which…
This screwdriver is designed to allow the use of any standard bit in otherwise impossible to reach places. Additionally, it has an adjustable handle allowing you to change the tool's overall length, providing extra reach and more leverage…
includes .stl file and fusion 360 .f3d file Category: Parts
Designed to hold USB cables of all kinds. Both ends of each cable are held at the top of the holder so you can clearly see which cable you are picking out. Also, this allows the cord to hang only half its overall length below. Included is…
This is a wall mount for a SiliconDust HDHomeRun Flex 4K ATSC 3.0 NextGen TV tuner. Included are the associated Fusion 360 source .fd3 , .3mf, .stl, and G-Code (PTEG 15%, infill) files. Photo shows the top of the case facing out. However,…
These prints help tidy up Victron VE.Direct / MK3 - USB cables on a wall/backboard. With them, the Victron cables can be mounted directly to the wall/backboard or on a matching pedestal. The pedestals raise the cases above the…
This model is sized for the Lilygo T-Display S3-display, not the Lilygo T-Display-S3 AMOLED device which is slightly narrower. If you're interested in the model for the AMOLED device it is available here . Required: a Lilygo T-Display-S3…
I bought a 24" 2-Stage Snow Blower but it didn't look finished to me; it seemed to be missing a cap for the portion that holds the shear pins. I called EGO and they told me that is how it was designed, and the shear pins are fitted in…
This model was built in support of the free open source project described at https://rlatour.com/youtubesubscribercounter and is sized for the Lilygo T-Display S3 AMOLED display (version 1). A derivation of this model for the non-AMOLED…
wall mount for common 12 V Toggle Switch affix to wall with common wood screw, also uses a single set screw (m2.5*5) designed for use with 18/2 wire see photos for step by step assemble and install process includes: .stl, PRUSA Slicer,…
If you have worked with many types of ESP32 or ESP32-S2 dev kit boards you know they do not always fit well onto either a standard breadboard or two attached standard breadboards if you want to assess to all the pins. This 3D print is a…
This enclosure is for an electronics project using a 110 mm x 136 mm solar panel. For example, a basic WIFI weather station that measures temperature, humidity, and perhaps pressure. The enclosure has three parts: one main body, featuring…
This is a cover for a Victron 500A Smart Shunt. It has been designed with the cables coming out in a specific direction (as seen in the photos). However, if the cables on your system come out in another direction you are welcome to vary…
This is a case that holds both a Raspberry Pi + SSD where the Pi is housed in an Armor Aluminum Alloy Case Protective Shell ( here:…
This enclosure pairs a Raspberry Pi 4, housed in an aluminum Flirc case, with a 2.5” SSD. For more information on the Flirc case, please see: https://flirc.tv/more/raspberry-pi-4-case You can also find it on Amazon. The 2.5" SSD shown is…
This 3D printed enclosure (three parts: left, middle, right) holds two 8 module Max7219 display boards. Included are the .stl files and the Fusion 360 (source model) .fd3 file. It also requires a front piece of red acrylic plastic 1/8"…
Made this case to mount my Flirc Raspberry Pi 4 case to the wall. Of note, this does not replace the bottom of the Flirc case, rather the print is simply placed beneath it. To do this, just unscrewed the existing four screws from the…
This a tool that can be attached to a standard drill or screwdriver bit to help drive hooks. It's large enough to also work by hand - without being used as a drill attachment. Includes .stl file, and fusion 360 .f3d file. Print Settings…
This case, a remix of this model by Pyrho , accommodates a Raspberry Pi 5, Raspberry Pi 5 Active Cooler, Raspberry M.2 Hat, and PCIE M.2 2 Port SATA adapter. It requires four M2.5x10 screws to replace the four of the eight shorter M2.5…
Holds alligator clips in place so that they don't accidentally touch when, for example, powering your electronics project. The base has hidden spots to optionally insert four 8 mm x 3 mm (actual size about 7.9 mm x2.85 mm) magnets.…
Edit 2023-02-03: Updated to ‘model 2’ - slightly bigger inside (as later revisions of the Go Gotcha are slightly larger) and now includes a thumb grip on the case. Go Gotchas are great, but sometimes if you carry them in your pocket the…
Designed for the Victron Lynx Distributor M8 (not sure if it fits in the M10 version). Provides two slots in the back to allow smaller gauge wire to be run out the back end without opening up the whole back end of the device. Includes…
Kept looking for a box with a sliding lid, didn't find one I really liked so I built this one. It is totally customizable (length, height, width, wall thickness, etc.) based on parametric design contains Autofusion 360 source .fd3 file…
project box supporting: a Nextion 3.5 inch display an esp32 dev kit 1 board a wemos 18650 battery shield v3 with an opening for usb power cable NOTE: there are two .stl files, one with posts for an EDP32 DOIT V1 board, another for an…
This is a custom designed wall mount for the Fiskars 23 Inch PowerGear Hedge Shears. There are many models of Fiskars products so please see the photo to ensure you have the right one for use with this wall mount. Included are the source…
A wall mountable case and cover for the Waveshare Solar Power Manager (B) / (C) ( https://www.waveshare.com/solar-power-manager-b.htm not an affiliate link) Includes: the source Fusion 360, PRUSA and GCode (for PTEG) files for the base…
This insert is designed to fill in around the gaps left between the back of a Be Quiet! Dark Base 900 Pro Rev. 2 Case, and a Be Quite! 1200w Dark Power Pro 12 power supply, when a Be Quite C19 / C20 Cover is used. In the first before…
Edit: update April 2026 to support version 2, and the ESP33-P4-ETH (with or without the POE Hat) but files also include support for the Olimex ESP32-PoE-ISO Rev. B used in version 1. full project on:…
Top and bottom swivels sets for use with 1" diameter flagpoles, with three example caps. Includes Fusion 360 source files (.fd3) and .stl files. The swivel set pieces are printed twice; once for the top of the flagpole to secure the top…
This package contains three designs (including all .stl, PRUSA Slicer, PRUSA MK3S g-code, and Fusion 360 source files) to mount a Raspberry Pi Zero in a Flirc case to a wall or backboard. These designs are for: Mounting on a pedestal…
This a the print for the open source project described here: https://github.com/roblatour/SolarWeatherStationIII edit: updated 2024-05-12 to include an alternative top that includes air vents.
This is a solution to put a cable, such as a usb cable, thru the wall of a project box enclouser. The files include a small sample wall, and the pieces that can be used on either side to secure the cable as it passes thru the box, without…
enclosure for the ESP32 Network Blocker (Internet Kill Switch) - Project 1 as found here: rlatour.com/esp32networkblocker
enclosure for the ESP32 Network Blocker (Internet Kill Switch) - Project 2 as found here: rlatour.com/esp32networkblocker
The extra wide flat top of the cap makes pressing the fire alarm reset button super easy! Designed for a broom handle with a diameter of 0.925" (23.5 mm). Include caps for both ends (with and without treading). Also includes, as a bonus,…
This is a remix of: LED Matrix Modular Case System ( https://www.thingiverse.com/thing:2811071 ) by moonlander (female end). It adds a slot through which a power cable can be inserted. Of note, the above can be optionally used in…
This is a two part print which is joined, using a ¼" diameter 2½" long carriage bolt, to one end of a 2x2 wood plank. It, together with the 2x2, braces the bottom of a solar panel allowing it to be optimally tilted towards the sun .…
This is a custom wall mount for a Fiskars Pruning Stik. There are many models of Fiskars products so please see the photo to ensure you have the right one for use with this wall mount. Included are the source .fd3 (Fusion 360), .stl, .3mf…
Every chopstick needs a hat. This chopstick hat was specifically designed for my own personal chopstick, but I've included the Fusion 360 .f3d file, along with the .stl, so you can design it to fit your chopstick. Invented just after my…
This is a wall mount for this 12v / 24v / 36v USB Charger Step Down Power Supply: https://www.aliexpress.com/item/1005002950968760.html (not an affiliate link) For 12V / 24V / 36V Solar systems. Included are all the associated Fusion 360…
This is a wall mount for this 12v / 24v / 36v USB Charger Step Down Power Supply: https://www.aliexpress.com/item/1005002950968760.html (not an affiliate link) For 12V / 24V / 36V Solar systems. Included are all the associated Fusion 360…
These are all currently available results.
