Counting matching models…
Drag chain mount for MPCNC Primo, remixed from thing https://www.thingiverse.com/thing:4613811 . I chose to attach the drag chains directly to the Nema17 steppers with a design that straps around the motor and kept in tension with a…
I really liked the design by argoroots, and made a few tweaks to it: I added a rounded "gutter" for the wiring harness to nestle into; I split the gutter down the middle with a self-centering groove, so that it would tighten a little more…
A simple remix of the HSW insert, but i think it looks adorable. No Honeycomb storage wall should be without one! No MMU needed, just a few simple manual filament swaps (explained below). I mounted the design from…
There are many extruder movement indicators, and I was looking for something simple, so here is my own take. This is a collection of a number of indicators, printed in two colors (black and orange Prusament PETG in my case, to complement…
This is a collection of stackable boxes, compatible with for Alexandre Chappel's 55mm grid system (see https://www.alch.shop/shop/assortment). This system is older than the popular gridfinity and i have tons of drawers and tool organizer…
Print 3 of the bottom arms, a multiple of 3 of the middle support arms (I used 3), one ring segment, and (optionally) couplers that will help with alignment if you extend the LED lights (for instance if you want to add a 2 foot height…
Remix of the wall mount for recent mac minis (2019 i7 in my case) to mount them to the Honeycomb Storage Wall. This requires 4x of the HSW studs that have m3 holes and countersunk hex nuts, 4x m3x10mm button head screws from your spares…
This is a set of quarter height storage boxes for Alexandre Chappel's 55mm grid system (see https://www.alch.shop/shop/assortment). This system is older than the popular gridfinity and i have tons of drawers and tool organizer that I use…
Adapter for popular airbrush booths that use 120mm fan mounting pattern. This adapter replaces the hose connector on the back, and angles it upward, where it can be connected to a magnetic hose connector by furfoxsake. I use this setup to…
The original design has the hose attached to the top dispenser cup in such a way that any maintenance to the hydro tower can mean that the hose needs to be fed through multiple sections from the bottoms up, and as a result the entire…
This coupler attaches to the back of the chamber exhaust fan of a Voron 2.4 (or any printer that has a similar 60mm exhaust fan setup). It replaces the stock 60mm fan guard. Use longer bolts that feed through the adapter, through the fan,…
Don't throw hobby knife blades in the trash! This is a 1x1-grid, sealed blade disposal storage box, compatible with Alexandre Chappel's 55mm grid system (see https://www.alch.shop/shop/assortment). This system is older than the popular…
I created these for 2.5" hoses, and use them for fume extraction for FDM and resin printers. In my case, they attach to an inexpensive inline fan to vent any fumes outside. Hose I use: https://www.amazon.com/dp/B07BFSB2BW Clamps:…
Printed in PETG, these stands have a simple base that has a thumb latch compliant mechanism that enables the arm with the light holder to slide up and down, and lock in place at half inch increments. I printed with 3 shells, 15% infill,…
This is a 2x1-grid, half height, storage box for Alexandre Chappel's 55mm grid system (see https://www.alch.shop/shop/assortment). This system is older than the popular gridfinity and i have tons of drawers and tool organizer that I use…
This is a shallow tray or brushes that is compatible with for Alexandre Chappel's 55mm grid system (see https://www.alch.shop/shop/assortment). This system is older than the popular gridfinity and i have tons of drawers and tool organizer…
The stock back panel on my Voron 0.1 had been leading to persistent cooling problems for the electronics, so i left it off. Since I wanted to add fume extraction and chamber cooling to my Voron 0, along with the ability to add cooling…
This is a quick model (source code included in openScad) for a nozzle attachment that fits a popular Conair 1875 Cord-Keeper hair blower. I printed this in ABS because of its high temperature properties on a Voron Zero. Not recommended to…
This modification is intended for 3D resin printers (or curing stations, or any other enclosure in which undesirable fumes are produced), and provides a magnetic coupler for the furfoxsake's magnetic dust extraction coupler. In my setup,…
This is a 3x1-grid, quarter height, storage box for Alexandre Chappel's 55mm grid system (see https://www.alch.shop/shop/assortment). This system is older than the popular gridfinity and i have tons of drawers and tool organizer that I…
This is a 1x3-grid, 3/4 height, storage box with sub dividers, for Alexandre Chappel's 55mm grid system (see https://www.alch.shop/shop/assortment). This system is older than the popular gridinity and i have tons of drawers and tool…
This is an SD card storage box for Alexandre Chappel's 55mm grid system (see https://www.alch.shop/shop/assortment). This system is older than the popular gridfinity and i have tons of drawers and tool organizer that I use for this…
Coupler for connecting a dust collection host with 2.5" diameter to a Vivosun D4 inline fan. I use this with my fume extraction setup (see https://www.printables.com/model/427271-couplers-for-25-fume-extraction-hose for details). This…
This is a 2x1-grid, half height, storage box for Alexandre Chappel's 55mm grid system (see https://www.alch.shop/shop/assortment). This system is older than the popular gridfinity and i have tons of drawers and tool organizer that I use…
This is a 2x4-grid holder for Husky 7-piece precision screw driver set . This holder is compatible with Alexandre Chappel's 55mm grid system (see https://www.alch.shop/shop/assortment). This system is older than the popular gridfinity and…
I wasn't happy (like many people) with the z-stop mount that comes with the printer. i felt it was flimsy, easily out of alignment, and hard to accurately adjust. I played around with an inductive sensor, but had reliability issues, which…
This is a 1x2-grid storage box for multitool blades. These come in ¼, ⅓, ½, ⅔ height (where full height is 75mm), so you can print a few and keep your used/new/wood/metal etc blades nicely organized. The boxes are compatible with…
During initial testing with the FT-5, I noticed how the hotend movements are also dragging filament off the spool. Given the high travel speeds of the x-y carriage on an FT-5, I didn't feel it was a good idea to let the same movement also…
This is a 2x4-grid holder for Bondhus 74686 metric hex ball driver set . This holder is compatible with Alexandre Chappel's 55mm grid system (see https://www.alch.shop/shop/assortment). This system is older than the popular gridfinity and…
After replacing a faulty optical drive on my Wii, I opted to install an m.2 nvme SSD and use it for game storage. The SSD fits in a small 12x28x104mm case that connects the drive to the Wii via USB. There are several such enclosures, i…
This fan mount just clips on the inside of the lower frame of a 2020 aluminium Kossel Mini (in my case a Folger Tech kit). I use three of these clips to have some air movement over the tower stepper motors in order to keep them cool. Each…
This is a 1x1-grid, quarter height, storage box for Alexandre Chappel's 55mm grid system (see https://www.alch.shop/shop/assortment). This system is older than the popular gridinity and i have tons of drawers and tool organizer that i use…
These are 1x2-grid storage boxes for Brother P-Touch cardtridges. The boxes are compatible with Alexandre Chappel's 55mm grid system (see https://www.alch.shop/shop/assortment). This system is older than the popular gridfinity and i have…
This is a 1x1-grid storage box for Zap brand superglue bottless. Each 1x1 box can store 4 of them. The boxes are compatible with Alexandre Chappel's 55mm grid system (see https://www.alch.shop/shop/assortment). This system is older than…
As part of my fume extraction system (see https://www.printables.com/model/427271-couplers-for-25-fume-extraction-hose ), I needed a way to connect 2.5" hose to an exhaust hood (Everbilt exhaust hood with pest guard, purchased at Home…
This model is for use with Veranda 4x4" by 8' vinyl-sleeved pine posts. I removed the post (reuse for other project) and kept the sleeve to be used as a hydroponic channel. Bought these when they were on sale:…
I modified Rambozo's LCD mount ( http://www.thingiverse.com/thing:846900 ) to include enough room for a USB extension cable. This way the SD card is on the left of the LCD mount, and USB connector is on the right in case I want to…
This is a 3x4-grid holder for MSG-501 Cable Boss stapler by Gardner Bender. This holder is compatible with Alexandre Chappel's 55mm grid system (see https://www.alch.shop/shop/assortment). This system is older than the popular gridfinity…
These boxes have rounded insides and finger recess, and we use them for cutlery in our kitchen drawers. They are for Alexandre Chappel's 55mm grid system (see https://www.alch.shop/shop/assortment). I use these to store cutlery and other…
This is a 2x3-grid holder for Pro'skit 7402 hex nut driver set . This holder is compatible with Alexandre Chappel's 55mm grid system (see https://www.alch.shop/shop/assortment). This system is older than the popular gridfinity and i have…
I wasn't satisfied with the messy and inefficient MMU3 spool setup that Prusa conceived of. Since my printers are on steel storage rack shelfs, it also means i have more storage space options available to me that do not take up as much…
This is a 1x3-grid storage box for the Neiko 10574A 1/4” Drive torque wrench . The boxes are compatible with Alexandre Chappel's 55mm grid system (see https://www.alch.shop/shop/assortment). This system is older than the popular…
These fit come in a single channel or double channel (pictured) variety, and can be used to keep a hydroponic NFT channel at the right pitch (in this case a 90mm pvc sleeve from Veranda that you can find at Home Depot). I used…
I wanted to add a filament runout sensor to my Voron 0.1. This solution replaces the rear right foot for one that has an attachment for a TriangleLabs filament runout sensor . This requires some additional hardware: 2x m3x4mm heatset…
My masterbuilt 40" smoker was sitting a little too low to directly attach my Masterbuilt coldsmoker unit. Designed these feet to bring the main smoker to the right level. Print two of each, PETG recommended, 20% infill. The OpenSCAD file…
These are all currently available results.
![[ALCH] stackable modular boxes in 6 heights and 9 dimensions (169 variants!) (ModuBox)](https://media.printables.com/media/prints/480542/images/3928335_14b3996b-2bdf-4a15-b686-0b93b75cb299/img_0565.jpeg)
![[ALCH] Storage boxes for tweezers, drills, files, driver bits etc (ModuBox)](https://media.printables.com/media/prints/467308/images/3830658_1c7b55ef-cb52-451c-b721-ee06b71c9864/alch-tweezers-drills-files-1.jpeg)
![[ALCH] sharps / blade disposal box (ModuBox)](https://media.printables.com/media/prints/469779/images/3849579_e015dd7a-3ea9-41e1-a76d-c0196c71941b/blade-disposal-1x1.jpeg)
![[ALCH] Storage for Tamiya 6 / 10 / 18mm masking tape set (ModuBox)](https://media.printables.com/media/prints/467300/images/3830619_3d7a7bcd-3a25-4fc4-b93f-1ad62c040b8b/alch-tamiya-tape-1.jpeg)
![[ALCH] Storage boxes for brushes etc (ModuBox)](https://media.printables.com/media/prints/480402/images/3927790_1a1e71d5-e4cc-4090-ad7f-a7ce0ea8aa53/img_0637.jpeg)
![[ALCH] X-acto knife holder (ModuBox)](https://media.printables.com/media/prints/467305/images/3830648_312a544a-d3a1-4929-a8b2-e7213237d9c2/alch-xacto-knives-2.jpeg)
![[ALCH] boxes with sub dividers (ModuBox)](https://media.printables.com/media/prints/480616/images/3928936_94593618-ec54-45e9-bb44-4612bccb6fc8/boxes.jpeg)
![[ALCH] SD card box (ModuBox)](https://media.printables.com/media/prints/470706/images/3856216_d269f51c-3a86-4865-94ce-694a5aba9bbf/alch-sd-cards.jpeg)
![[ALCH] Tamiya weathering system organizers (ModuBox)](https://media.printables.com/media/prints/467303/images/3830634_968f4a2c-575e-416e-8d5f-3b7c05243e80/alch-tamiya-weathering-2.jpeg)
![[ALCH] holder for Husky 7-piece screwdriver set (ModuBox)](https://media.printables.com/media/prints/484747/images/3959412_5d15faf9-7c62-44ea-8bf0-85cd9dc579c6/husky.jpeg)
![[ALCH] Stackable storage boxes for multitool blades (ModuBox)](https://media.printables.com/media/prints/3df5b320-2252-4dd4-ab2e-78bcfee6cbfe/images/9921554_e7d8db92-9584-4e7e-b424-a95f5fa774f7_bbace89b-bf0b-494e-8d8f-ad49f9e5c46c/img_4220.jpeg)
![[ALCH] storage tray for Bondhus 74686 metric hex ball driver set (Modubox)](https://media.printables.com/media/prints/481552/images/3935827_11b0dcb4-8fa1-45fe-8bc4-fc1ada852903/bondhus.jpeg)
![[ALCH] E3D Revo nozzle box (ModuBox)](https://media.printables.com/media/prints/467299/images/3830613_969f20b3-135a-4993-9b75-3960a88c1f10/alch-revo-nozzles-1.jpeg)
![[ALCH] Brother P-Touch cartridge storage (ModuBox)](https://media.printables.com/media/prints/484289/images/3955956_58f3adfd-c8ac-4353-abaf-0a63f5395332/ptouch-22.jpeg)
![[ALCH] Zap brand super glue storage (ModuBox)](https://media.printables.com/media/prints/783179/images/6078805_4a9322a1-785d-41ce-a92e-5ddd9794f56e_d60b32ca-f052-40b0-be6a-0f0fc893957a/img_2285.jpeg)
![[ALCH] Gardner-Bender Cable Boss stapler holder (ModuBox)](https://media.printables.com/media/prints/480707/images/3929503_d4d6d0c5-36c8-4219-a2aa-8189f3fbb773/stapler.jpeg)
![[ALCH] cutlery boxes with rounded insides (ModuBox)](https://media.printables.com/media/prints/8a666ac4-2334-4997-814b-8ad02c4b2f9c/images/9412881_28d81996-52a0-499a-af56-c34cce02ea14_e591874a-9a86-4732-87f6-48f9b6e52da4/img_3644.jpeg)
![[ALCH] storage tray for Pro'skit 9402 hex nut driver set (ModuBox)](https://media.printables.com/media/prints/484691/images/3959083_32bf03d0-507d-4520-917b-e36a22e9e24f/img_0642.jpeg)
![[ALCH] Storage box for Neiko 1/4" torque wrench (ModuBox)](https://media.printables.com/media/prints/1110117/images/8388819_c8382fa0-8f31-422c-b524-c58ad184e32b_7e3d933c-baf2-485a-bbae-c446accfdff2/in-box.jpeg)
