Counting matching models…
This model is designed to use four 8mm x 3 mm magnets (I bought mine on Amazon). The magnets are concealed within Base, kept in place by Casing. The "Clean" / "Dirty" letters snap into place (or glue them). The tolerances are tight. If…
Print approx. €0.64–€0.78 excl. taxPreliminary estimate for one variant
I loved the idea of adamfierman's BatteryTap (Thingiverse 4293579) just use a battery tip or bottom to press buttons such as on screens like at the cashier, gas station, ATM, or other buttons without having to use your fingers. I wanted a…
Print approx. €0.35–€0.43 excl. taxPreliminary estimate for one variant
Video demonstrating the touch controls / adjusting brightness https://www.youtube.com/watch?v=x7zqOPEqBCw This project is for the 2.8" ili9341 TFT LCD and Touchscreen . The ESPHome code for this project, which is a clock showing inside…
I waned a small bowl of about these dimensions. I looked at Thingiverse in "bowl" and "dish" and didn't find anything that caught my eye. So I sketched this up. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: Yes…
I bought a portable 15.6" IPS travel monitor https://www.amazon.com/gp/product/B07XDDY7TS It came with a "leatherette cover" but I find that to be bulky and not a great stand. Previously I leveraged the pen-hole as a stand…
Superstar_beki's model didn't fit on my print bed and I didn't like that it was already scaled, so I imported their model into Fusion 360 and scaled the length and a few other things such as adding a joining peg to connect the base and…
I printed Greg's Heart Shaped Jewelry Bowl for my wife and she really liked it. When I suggested it was kind of small for what she needed, she agreed. I considered scaling the model up to make it larger, but I didn't want to impact the…
I recently got a Contour ShuttlePRO V2 to help with video editing in Final Cut Pro. It came with paper labels for the upper buttons, but for my needs I was missing two labels. And the lower six buttons have no labels. I thought I'd use my…
I've been using the original model for about eight months and like them. Today, my wife asked me if I could modify the holes to make it easier to insert hangers. After a bit of discussion and playing, this is the model I came up with.…
I liked ShaGa_17 's Simple modern Incense holder but it wasn't wide enough for my needs. Unfortunately they didn't provide any source file and merely scaling it to be wider wouldn't work. Additionally, their two provided hole sizes didn't…
See it in action https://www.youtube.com/watch?v=UKWGT0Ywonw My ESPHome Code https://gist.github.com/kdorff/046ddc1ad3c481aeb2b18e511e84b289 I've been playing with the TM1638 and ESPHome and wanted a case for my project. blwn 's TM1638…
I liked the original design but I didn't need the large hole OR screw holes in the mounting plate, as I am mounting it with 3M Command adhesive strips. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Resolution:…
I reviewed Extruded.Mind's model and wanted something slightly different. I used Extruded.Mind's model for some basic dimensions. My model has more space for the cleaning pads and a window, making it somewhat easier to use. I wanted a bit…
I printed alaorath's Dice Tower and found it to be very easy to print (after correcting orientation) but found the back piece overly difficult to glue into place. I brought this model, the original base, and Harmful_Flea's Tower Add into…
If you print in the orientation provided, you shouldn't need supports. Also included in the photos is my Housing for the VL53L0X Time-of-Flight (TOF) sensor . This case / project box is designed to fit the ElectroCookie Mini PCB Prototype…
Description If you print in the orientation provided, you shouldn't need supports. Also included in the photos is my Case for ElectroCookie Mini PCB Prototype Board . This housing is designed to accommodate a VL53L0X Time-of-Flight (TOF)…
I've included 3mf and stl. I've included a Fusion 360 export, should you need to edit the model. A year or so ago, I was having problems with my QNAP TS-563. I needed to get things back up and running so when my troubleshooting was…
I wanted to model a custom wall plate. I based mine on Alexhart's. This is a simple, chamfered wall plate - The important difference here is I'm including a Fusion 360 export file should you want to make your own custom GFCI outlet wall…
jakejake's Universal Phone Tripod Mount is an amazing model - nearly everyone one could possibly want in a Tripod mount for a phone. But it requires a 1/4-20 "jam" nut. When I bought nuts for my Tripod prints I didn't know there WERE…
I wanted to mount some of my ThirdReality Motion Sensors in a corner. I designed this model to solve the issue. I used VHB Tape to affix the mount to the wall as well as to affix the sensor to the mount.
I liked the original model that I remixed from, but I have 8mm magnets and the original designed used something smaller. My magnets measure about 8mm x 2.7mm. I've tried to not cut tolerances too tight. I believe I am using…
This is a small piece to print (twice) for affixing to your PSVR for people who wear glasses. This is thought to help reduce scratches on the PSVR lenses (and your glasses?). Why the remix? I wanted smoother lines, different fillets, and…
I needed a corner shelf to hold a lightweight light fixture I have. I looked briefly at Ikea and didn't see what I was looking for. I looked briefly here and found one or two contenders, but they didn't really seem to meet my needs either…
I recently got an Arturia MiniLab MkII 25 MIDI controller. While going through a tutorials for Reaper, I I realized I wanted the keyboard to be more accessible. After contemplating, I designed this. I took a guess at an angle (30…
I build a fan controller using a Seeeduino Xiao microcontroller soldered to an ElectroCookie Mini PCB Prototype Board . I wanted a small case for this and similar projects such as those using an ESP32 D1 Mini or ESP8266 D1 Mini. There is…
The original design seemed almost exactly what I was looking for, but I don't really need the Puppy image on the part. Fortunately, the original creator provided a .STEP file which I was able to bring into Fusion 360 and quickly remove…
I've include Fusion 360 export. I keep a FireTV Stick 4k in my bag for travel use. I wanted a small box to store it in, so I made a small travel box. A small gap should help make the lid not be over-snug (for most printers). I'd like to…
The original design didn't allow for installing, removing the sidebox while the printer was assembled, or so it seems to me. This modification retains most of the functionality but allows you to install / remove the box with any frame…
I wanted to build an ultra simple C64 power supply using two wall warts (5v DC, 9v AC) and an extension cord. I used zip ties to help keep the cables from pulling out of the box. I designed this box to contain the power supplies and to…
I have a few hats I'd like to display at work. I won't be able to drill into a wall (as with the original design) but instead there is a low divider that is about 15mm deep. I've adapted the design to straddle the top of the divider.…
I'm updating a Timex Sinclair 1000 and wanted a nicer case (the original shows a bit too much damage). Sagittario modeled an amazing ZX81 case and generously shared his model source with me. He even moved the video out port to match the…
I wanted a little shelf above my GFCI Single Gang Electrical Outlet Wall Plate. Here it is! I've designed a bit of tolerance in the "glue channels" so it should be relatively easy to print and assemble on most printers (hopefully). *…
Let me just say that I love CaseStudyno8 Lightsaber's. Darth Vader's looked the easiest to print and assemble, so I started there. Once I assembled my first printing, I decided I wanted a couple modifications. First I wanted the Power…
I wanted a shelf to put atop my CyberPower BRG1500AVRLCD UPS so drew one up in Fusion 360 and printed it out. Print parts in the orientation provided - you will one to print two or three of the legs stl. I suggest you use supports on the…
I've been playing Animal Crossing New Horizons. I decided a Turbo button would be nice for several things in the game. I got an 8Bitdo SN30Pro+. For the long crafting sessions, I wanted a want to keep the button pressed for me. So I…
We have a door that we like to have the open to keep cracked open, so the cats can come in and out. I wanted a model that used magnets to hold the door open “a bit” but it should also be easy to keep it open or to close it. This model,…
I was assembling Pirulk's Wingspan Insert and needed to place a small ton of magnets. I'd discovered while assembling my Wingspan Dice Tower prints that getting consistent magnet orientation is critical. So I designed this jig to hold the…
I wanted to replace the standard antenna on my BetaFPV VR04 goggles. To do this, I removed the stock antenna and replaced it with 5.8Ghz SMA antenna ( link to what I used - I am not claiming this is the best choice, just my choice) RP-SMA…
Hey look! I designed another top. The model comes whole. I DON'T RECOMMEND printing with supports. Instead, use your slicer (or another tool) to cut the model in half, print both halves, and used CA glue to glue the two parts together. To…
I wanted to build a BCD Clock, similar to the one I got that originally came from ThinkGeek. I used 24 60ppm LEDs , in four six-pixel strips. There is a channel in the Panel Back, along with LED "center markers." All connections are done…
My rendition of the Hitman Double Gold Baller coat / lapel pin as seen in the game. Use 6mm x 3mm magnets. Use CA glue to affix the magnets to the pin and backing. I'll post new pics when I get it printed in Gold Silk.... Should look…
I bought the Nulaxy Laptop Stand laptop stand from Amazon , the https://www.amazon.com/gp/product/B07P54RSPY I really like the stand it's super solid. But I feel like the edges on the base are a bit sharp for sliding sensitive in the…
I've just started doing Neopixel projects and saw Bitluni's video . I knew I had to build one. I downloaded the STL files and went to print them, but saw the hole to mount the power jack wouldn't accomodate the barrel jacks I own - mine…
I use anRSA SecurID hard token throughout the day for authentication. This helps the token stay put on my desk with an easily visible angle. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Resolution: 0.20mm…
I didn't like any of the options to wall mount the remote control for my Brondell Swash 1400 bidet seat's remote control. I considered designing a shelf, but decided my best option would be just to hang it. To facilitate hanging it, I…
I bought Target's Brightroom Storage Caddy and wanted two additional dividers so I whipped this up. I used E6000 to glue (applied kind of like caulk) the dividers into place. They feel quite solid - I'd as just as solid as the included…
THIS IS THE NEW VERSION! This no longer uses the Pavo Femto frame. I'd been wanting to get an RC car to drive FPV. I decided to start small for driving around the house to harass the cats. I finally decided on the Hobbyplus Speck-B…
Receiver tray if you aren't using the stock battery or receiver. I'm using a HappyModel ExpressLRS EPW6 2.4GHz ELRS 6CH PWM receiver and an external battery with my HobbyPlus Speck-B. I also have a DasMikro Gyro V6 installed. Using this,…
These are all currently available results.
