P
PrintablesBluefrogman
Kraken door knob
Functional door knob with Kraken. I reduced the scale to print on Mars 3 printer, so this will in turn reduce the keyway to allow turning. Keyway is now 7mm.
- Downloads
- 252
- Likes
- 38
- Rating
- 5
All models
Counting matching models…
P
PrintablesBluefrogman
Small 90 degree shelf bracket
Simple 90 degree shelf bracket. 105mm long. Complete with angled screwdriver holes to you can get to screw the screw in! PZ6 screws will fit through the ‘screwdriver’ holes, bigger than that, place into the holes before putting the…
- Downloads
- 117
- Likes
- 19
- Rating
- 5
P
PrintablesBluefrogman
Bird cage dual purpose lock
Dual purpose bird cage latch. This will fit maximum 2.3mm diameter wire on 8mm wide cages. Typical eBay bird cage fronts (see pics). Lock position one: Door locked, recess on locking plate allows for slight door movement, but the 3mm…
- Downloads
- 91
- Likes
- 10
- Rating
- 0
P
PrintablesBluefrogman
Coke bottle electric fence insulator
Edge (post or similar) and straight, electric fence insulator holders. Will suit typical 6/9 strand electric fence wire. Print and screw into place using pre made holes. maximum 5mm shank screw (typical width for 1.5" screws) after…
- Downloads
- 70
- Likes
- 10
- Rating
- 0
P
PrintablesBluefrogman
mini drawers
Small storage drawers for screws, fuses, drill bits etc. Approx 80w x 80h x 80d mm (1 drawer), 80 x 35 x 80mm (2 drawer), and 35 x 35 x 80mm (4 drawer system). All single, 2 & 4 drawers have a split drawer system (see files) for more…
- Downloads
- 60
- Likes
- 14
- Rating
- 5
P
PrintablesBluefrogman
17ml Paint Dropper Bottle Rack
* EDIT 04/11/23 * ADD A RAFT! Otherwise, the model is likely to peel up. 36 standard dropper bottle wall mountable rack. 25.6mm gaps allowing for the slight variation in size between Army Painter & Game Colour dropper bottles. 100%…
- Downloads
- 53
- Likes
- 8
- Rating
- 0
P
PrintablesBluefrogman
TSTAK Wall mount & support bracket
TSTAK Wall mounting bracket and support bracket. Support bracket only required if box + contents >5kg. Settings: 4+ walls. 50%+ infill. Greater the infill, the more secure the bracket. Tested with 10kg total weight when using the support…
- Downloads
- 52
- Likes
- 14
- Rating
- 0
P
PrintablesBluefrogman
Budgie / Finch / Parrot etc. drinker (automatic)
* UPDATED 05/08/23 Fixing Plate Added * Built to fit through a double wire mesh set up in an aviary (however, is suitable for all), this automatic drinker provides your birds with constant fresh water by using a 2ltr soda bottle. I've…
- Downloads
- 49
- Likes
- 10
- Rating
- 0
P
PrintablesBluefrogman
Bayonet Cap Bulb holder
If you have O.C.D, Then this is for you! A simple Bayonet Cap bulb holder so you can wall / roof mount them for storage. Simple design, simply insert and twist to lock. Screw hole with countersink in the middle. 2+ Shell, 10% infill, no…
- Downloads
- 46
- Likes
- 1
- Rating
- 0
P
PrintablesBluefrogman
Aluminium Square Holder
Wall mountable bracket to hold aluminium square purchased from Temu (see description tags at bottom - photo of sold item included). I've printed this using ABS resin (100% infill) however FDM would work perfectly - minimum 3 shells, 10%+…
- Downloads
- 42
- Likes
- 7
- Rating
- 0
P
PrintablesBluefrogman
slimline Coke bottle drinker and cover plate
Slimline Coke (or similar) bottle auto-drinker. “Through cage” design (ie. will poke through a gap of 50mm (double meshed aviary), allowing the bottle to remain on the outside, and only the drinking reservoir to protrude through. Cover…
- Downloads
- 39
- Likes
- 6
- Rating
- 0
P
PrintablesBluefrogman
Antique iron door type stud
Pretty much carbon copy of old door studs as found across ironmongery sites. approx 22mm x 22mm x 14mm high. Print, screw into wood, then seal the screw hole with filler, blue-tack, toothpaste (yeah this actually works!), pva…
- Downloads
- 37
- Likes
- 4
- Rating
- 0
P
PrintablesBluefrogman
Breeding cage perch bars
3 different perch bars for budgies / finches etc. The smaller bar is 85mm high, the larger is 135mm, and the nest bar is 45mm (all dimensions inc. base plate). The 2 straight bars are slightly textured as I didn't like the idea of a…
- Downloads
- 29
- Likes
- 6
- Rating
- 0
P
PrintablesBluefrogman
Chick wall feeder
Wall mounted gravity fed wall feeder for chicks. Suitable for chick crumb, potentially chick starter pellets but I haven't tried with these. Approx 150mm high x 80mm wide x 40mm deep. Has a slight ‘anti-spill’ overhang on the inner tray…
- Downloads
- 27
- Likes
- 3
- Rating
- 0
P
PrintablesBluefrogman
60mm pvc pipe feeders
Feeder for use with 69mm (outside diameter - standard drain pipe size) PVP pipe. 2 models uploaded, the one in the photo has a slight baffle at the bottom to restrict grain / pellet flow, whilst the other has a vertical feed tray so no…
- Downloads
- 26
- Likes
- 5
- Rating
- 0
P
PrintablesBluefrogman
Screw ruler
Basic ruler for quick measurement of screws. Suited for 5mm shank screws maximum, however any bigger can still be measured, they just won't fit nicely into the trough (Max 8mm head). Recess at ‘zero’ to allow the head to sink in, for a…
- Downloads
- 26
- Likes
- 7
- Rating
- 0
P
PrintablesBluefrogman
cable tidy with UK plug holder
Wall mounted cable tidy with UK 3 pin plug holder. Accepts approx. 2m of standard 1mm flex. PRINT SETTINGS: 3 walls min. 10% infil min. No supports required. Raft not essential. * MARCH 2025 UPDATE * Added a reinforced version around the…
- Downloads
- 25
- Likes
- 2
- Rating
- 3
P
PrintablesBluefrogman
Bird Branch Holder
Screw into wall branch holders for caged birds. 2 sizes to accommodate different thickness branches (reduce to fit). Screw branch into the holder at the rear, twist to suit. Screw into top. Comes with support brackets. 3+ walls, 10%+…
- Downloads
- 22
- Likes
- 8
- Rating
- 0
P
PrintablesBluefrogman
Feed Holder (Fruit & Vegetables)
Simple aviary mesh feed holder for soft fruit and vegetables. Attaches to <1.2mm wire mesh. Could be modified if required to reduce the chances of it being pulled off. PETG/PLA. Print with corkscrew facing upwards. supports needed -…
- Downloads
- 21
- Likes
- 4
- Rating
- 0
P
PrintablesBluefrogman
bird cage mount for perches etc.
Simple wire cage mount (½" aperture - should work on ½" x 1" too) to attach branch perches to the wire cage. As long as the branch is approximately the width of your cage (minus perch attachments), this will be sturdy enough. Hole in…
- Downloads
- 21
- Likes
- 1
- Rating
- 0
P
PrintablesBluefrogman
RCOM Egg Separator (partition)
RCOM 20 advanced incubator model egg separators. Although the one's that come with the incubator are fine, the height was too low which enables different colours, breeds, lines to cross over. These partitions prevent this, whilst allowing…
- Downloads
- 20
- Likes
- 0
- Rating
- 0
P
PrintablesBluefrogman
Budgie feeder (69mm drain pipe)
69mm outside diameter pvc pipe (standard drain pipe) feeder suitable for smaller caged birds (Finches, budgies etc.). Feeder is approx 125mm deep x 100mm wide x 30mm high. Baffle STL. file is used as a bung on the bottom of the pipe to…
- Downloads
- 20
- Likes
- 3
- Rating
- 0
P
PrintablesBluefrogman
Stash Tin
Knurled exterior stash tin. Fit's £20 perfectly when rolled sideways. The wall mount isn't required unless you're planning on screwing it to a wall. At a guess, i'd say it could hold > £400 of notes. Print details: 3 walls, No supports,…
- Downloads
- 16
- Likes
- 0
- Rating
- 0
P
PrintablesBluefrogman
Skull widow holder
10% infill min. Raft & supports. Takes a good 12 hours to print, but happy with the outcome.
- Downloads
- 16
- Likes
- 5
- Rating
- 0
P
PrintablesBluefrogman
twin and earth clamp
Basic clamp to hold 15mm wide twin and earth. Comes with a screw / nail hole to fix. Print on it's back (ie. the countersunk screw hole on the bed - less supports needed) 2+ shells. 10% infill. supports required - No bed adhesion.
- Downloads
- 15
- Likes
- 0
- Rating
- 0
P
PrintablesBluefrogman
Consumables holder (Innocent bottle)
Wall mountable (3.5mm screw - make bigger if required). Two variants to this model. Plastic label (slight radius to flat bottom - 75mm diameter), and paper label (74mm diameter, larger radius). No supports or build plate addition…
- Downloads
- 10
- Likes
- 0
- Rating
- 0
P
PrintablesBluefrogman
Temu Clamp wall holder
To hold Temu clamp (see picture - approx 4" jaws) onto a wall. This is a snug fit, with added recess to hold it in place. Fairly simple. Enjoy. Print settings: 3 walls, 10%+ infill, Supports required. Print with tangs facing upwards. Uses…
- Downloads
- 7
- Likes
- 0
- Rating
- 0
P
PrintablesBluefrogman
Hex Piece Carousel (100% over engineered)
A massively over engineered Hex piece holder (wall mounted) that can be built up on a carousel system. Knurl around the base so your fingers don't get too tired when selecting the hex piece you want. x 4 ball bearing holes (optional) so…
- Downloads
- 6
- Likes
- 0
- Rating
- 0
P
PrintablesBluefrogman
30cm Brooder Plate Cover
A simple template for Titan 30cm x 30cm (20w) brooder heat plates. My guess is this will fit all 30cm heat plates. Simply print out, then follow the terrible photo instructions provided. This saves so much time cleaning the poop from the…
- Downloads
- 5
- Likes
- 0
- Rating
- 0
These are all currently available results.