Counting matching models…
Your cheap calipers drain batteries? I know, I know, I know! There are already almost thousands of solutions for your cheap calipers. There are plenty of battery covers (people tend to lose them when they try to preserve the battery from…
All Modifications are done in bambuslicer 1.10 and are contained in the 3mf file. You can choose the text in the slicer: Right click on the text_shape objects and “edit text”. Once you have chosen your texts, you can either: Choose the…
This round theme is tiny and mighty — these beads are all around math solids! In this collection you will find: All Five Platonic Solids : Tetrahedron Cube Octahedron Dodecahedron Icosahedron And some of their Archimedian Solid…
Merge of a coupling with a 1x2x0.5 duplo brick with a female coupling. Purpose: Make other cars hitchable
My friend Julian from Instagram created a nominated and winning ai-generated image for the contest "My Girl with a Pearl" from the Mauritshuis Museum in The Hague/Netherlands. You should definitely check out his Instagram:…
samla as drawer This model provides slides that allow you to use a 5 liter Samla box as a drawer. Pint the slides in the provided orientation Cut off two of the tabs of the box (see picture). Don't cut with brute force, else it might lead…
This Model allows you to: separate up to four different fractions in parallel dump the fractions individually in some other container without losing the separations
yet another ball joint. It started with my desire to reuse an old gorilla pod tripod. Their ball diameter is around 20.2mm. The tolerances might depend on your printer. I had to give it some trial and error. To make the design more robust…
You are camping. Its summer, its hot. Flies and mosquitoes are everywhere. Luckily you have a fly screen. Dont you? Oh! There is a hole. Here is your solution! A “stick on” patch for your flyscreen. For printing: use the provided 3mf…
This is a Remix of: More detailed of the part named cone_mid_flat_inlet It was mentioned in the comments of the remixed file that the stubs come lose and are already separate in the model. That is correct and fixed in the attached files.
These adapters exist in many different forms and sizes. I just wanted to have the bare minimum. Made for 40 mm wide tracks.
It turns out: you will crash if you sit in a lego duplo car due to a pretty severe lack of steering. The steering wheel can't be turned. Even worse: Sometimes there is no steering wheel and I can't see those sensors those modern self…
Prints in place without supports. The left-right fit could be a little tighter, however it does not fall out. Rubber Feet could help against sliding, as well as some weight in the back. you could glue in some old washers or other stuff.
A connector for pipes. I do not know yet what it is for. It is a sturdy yet lightweight connector for pipes for kids to build houses or forts. It tries to be optimal for 3D printing. Intended for 20mm electrical pipes, but can be scaled…
Goes in between of the fixations. You need to undo the headrest. It is compatible when the headrest stands have a diameter of less than 12.5mm and a distance (center to center) of 180mm (i.e. a clearance between the stands of 180-12.5mm).…
How can kids roleplay if there is no vilain? Luckily Musa Gilani created that model and shared it. Thanks a lot! This is a remix that fixes some of the commenters (of the original model) remarks. The split model can be printed without…
At some point during the last vacations, I did not crank back in the awning, I cranked off the winch slot to crank it back in. Awning? Winch Slot? What are we talking about? A picture says more than 1000 Words they say! If you are just…
'lil adapter that allows to drive the screws without any torque. When I change the tires, there is always 4*5 screws to tighten. Each one with 20 turns. OMG 400 TURNS. :) All done by hand. And after that they are to tighten up to the…
Holds the mic horizontally when beeing suspended from the ceiling by the cable. Made for microphones with the dimensions Diameter of the microphone: 87.2 mm height: 14 mm cable diameter 4 mm Do not print it upright. Print it on the side.…
There is quite a track record of major construction projects in Germany that have not been completed on time or on budget. To list some of the more recent ones, there is the Elbphilharmonie (completed in 2017) in Hamburg and there is the…
Spacer for the Jockey Römer Bicicle seat fixation. Why? If you buy the seat fixations used, there is a high chance you do not get the right spacers. This will solve your problem. Printing Use one of the provided STL Files. If it does not…
Remix from another DUPLO Wheelchair. As it was a scaled up LEGO model, it didn't quite fit the larger Figures of Duplo. I made the following modifications: Removed the four stubs on the seat lowered the seat by 4 mm added one bigger stub…
This is another take on the idea of sunshine: Creating dual-color filament . Inspired by a video of stefan (CNC Kitchen) I wanted to try this myself. In differentiation to those above: This shall be an accessible approach for those who…
Introduction When your children start to flip from the back to the belly or vice versa, it is time to start to secure whatever you might have in your flat. Things are slobbered on, things you thought lost appear in dipers. Fast forward a…
The nylon excenter broke and I came up with the model attached. Printing: The cam is intended to be printed horizontally, the two other parts are intended to be printed vertically. The ring slides over the cam to avoid the splitting due…
I printed these mudguards over a year ago and they held up nicely so far. You will obviously need some more small parts like screws and washers. I used some old spokes of a 28 inch bike as the radial side supports. I also used zipties to…
The model presented here is a test tube with a tilted bottom that is supposed to represent a small childrens mouth. Things that can fit into the tube and do not protude the opening shall be considered a choking hazard according to the…
This is the model of the monostable tetrahedron describet in the paper “BUILDING A MONOSTABLE TETRAHEDRON” Here is an article about it: BME Researchers Confirm a Forty-Year-Old Conjecture by Discovering a New Geometric Body | BME central…
Replacement part of a Jib furler As you can see from the picture, the old one broke. You will need to duplicate the part and then mirror the duplicate. Print both parts. The radial (half-)hole has no thread. Consider tapping that when…
A smartphone stand that allows you to charge your phone while in the stand. Can be clipped to a bookshelf. Can be standalone. Several sizes provided for different bookshelf thicknesses Prints without supports on its side Prints without…
Features hole spacing is 10 mm some random radii are on the outside little cone as a centerpoint biggest circle fits on a A4 paper Usage select one hole as center point, fixate with a pen select another hole create a circle V2 has holes…
This model is inspired by the wiha ergostar and was intended as my contribution to the Ergonomic Workshop Aids Contest: An ergonomic way to have your hex keys / allen wrenches at hand. Do you know the fiddling around until you finally can…
Someone…. Must have given the rear view mirror a slap Quite some Plastic broke on the inside. "Wait… what is this for?" You can control the orientation of the mirror by buttons on the inside. These control a small motor-gearbox-assembly…
Replacement corner Bracket for the baufix woodgame. Print on the triangular corner surface and use tree supports!
This is a nozzle for the handvacuum QUIGG MD19458H sold by Aldi. The vacuum has a pretty shitty shaped nozzle and this model improves the situation. Print upright with a brim.
What is that? This part is the clip that secures the license plate in the plate holder of a bicycle rack. The rack is the Twinny Load "Prestige" model that you might find second hand - it is no longer on sale. (There is more precise…
This schuko tray provides a location for a babyphone. The available footprint on the tray is 65x65mm. This only holds securely when a eurostecker ist plugged in at the bottom Print in the pictured orientations. Then assemble the parts…
Holder for the Remote. It has a inner space of 15x38 mm which fits the remote with the size 14x37mm in a upright orientation. Two other sizes available. Dimensions are in the filename/printables file description. It is intended to be…
Duplo 2x4 stubs part- without stubs but a Cavity for playmobil Blinking light with the following dimensions in mm. The cavity has a depth of 12.8mm. Print as provided, Consider using Supports You can remix from HERE
This is the attempt to recreate the connection for three pieces. Because: hexagons are the bestagons . There is currently no clearance designed which leads to a nicely selflocking joint. If you need to undo the connection, it might help…
Print some fridge magnets This is a really rewarding project. It is fun easy to accomplish uses old filament rests is a great gift Amounts Consider printing the letters according to the relative frequency of the letters . This is also…
Print Santas coat in a red filament. Consider using a Brim if you have adhesion issues. It prints together with santas cap. The cap has an overhang of 30°, depending on your printer this might work without supports. Print the figure you…
Little adapter to use the blinky lights of the bigger playmobil cars on the smallest. The orientation on the car is chosen to be able to open the trunk and the top cover. The model contains built-in supports in order to be printed…
Extended by 25 mm and modified the geometry to have to a single material print with "teeth". For the rest please have a look at the original model. Print orientation Put it flat on the build plat like shown in the pictures. you only need…
Yeah, we all know it. But noone dares to try it. Here is my proposal: Save your phone screen by attachting the phone to the back of your cat. As it is scientifically investigated (Warning: Link to Wikipedia: Cat righting reflex ) cats…
Background A friend of mine is the proud owner of a 1918 Welte-Mignon reproducing piano. The Welte-Mignon is the first self-playing piano. However, it is not self-playing in the way you might expect from today's self-driving cars. It is a…
Why? This is an adapter for fitting one 100mm wall hole fan to a Glass brick ventilation wing. The wing can then stay open and the fan can ventilate outwards. The Glass brick ventilation wing shown in the pictures is probably quite old, I…
A connector for pipes. I do not know yet what it is for. It is a sturdy yet lightweight connector for pipes for kids to build houses or forts. It tries to be optimal for 3D printing. Intended for 20mm electrical pipes, but can be scaled…
This part repairs the broken hinge of the flap of a Siemens (BSH) Fridge with vegetable drawer. This model involves some other parts and tools you might need. Print the part with the surface towards the build plate that will face the…
We have had it all. At some point. A window breaks… And if you want to replace it yourself, this shards remover might come in handy. An ordinary screwdriver might do it as well, I hear you saying? Not for an 3D-printing enthusiast!…
I needed the soap holder to be closer to the edge of the sink as my childs arms are not long enough. The suction thingy came from my last trip through the carwash. I added an STL file for reference. Do not print that, it will not adhere…
If you extend the existing hinges over 90°, the base bends and breaks after some time. This part replaces the base. There will be no ajustability left, so see how your existing hinge is ajusted, and then adjust this part prior to…
Why Those modern card wallets do not necessarily accomodate coins. Sometimes it is good to have coins at hand. What A card that accomodates coins. Space for six 2 Euro coins. Those spots also accomodate smaller coins Exactly the height of…
See original File Something went wrong when modifying the file… so, when printing: SCALE IT DOWN TO 3.94 % :-)
Inspiration This Model was heavily Inspired by : https://www.printables.com/model/349658-pipejoint-for-awesome-blanket-forts Improvement But I Started from scatch Optimized for printing without overhangs Decided for sperical balls Due to…
Now you can freely position the table without having it sliding around. The attachment hooks of the table will now engage in the teeth of this indentation track and hold the table. Consider printing it diagonally! Remix or modify…
This is a Remix of the awesome First and foremost: thanks waveman for this awesome model. It brings joy not only to my children but many of our little guests at home! I only remixed one part which you can download in its improved version…
Requires two 20mm M3 screws with countersunk head, as pictured. You can also print the third part in push it in the hole. Is glued with a double sided tape strip. the surface of 20mm x100mm is totally sufficient for double sided tape
This Model contains two files: a plug to cap the vacuum hose (as pictured) the same conical connector that can be reused for remixes. The chamfered end goes towards the vacuum. Dimensions: Vacuum facing diameter: 35mm. in 29mm distance:…
My chainglider became hungry. I have no idea why. But it needed this clip to stay shut. Print in provided orientation.
Archimedis2002 proposed the popsocket and I integrated it in the CMF Phone 2 Pro Cover. For printing Instructions of the popsocket, please refer to the original model. The backcover here has been thickened up to be able to print it on the…
Why? The prijon cruiser 430 can be used without steering, it is however kind of difficult to go straight. If you add a fin this is much easier. How? Add this to the mounting pivot of your kajak and you can squeze in normal fins that are…
Why Mounts the remote to the wall so that it can't get lost in a childrens room. For what Holder for one of those IR remotes with the follwing measures: widht = 53mm height = 86mm (this is not part of the model) thickness = 7.3mm…
Replacement Part for Haba Kullerbü Ramp Print in provided orientation - use tree supports. smooth!! Or flat on the bottom surface - use normal supports. Rougher surface. Remix: From Step File From Onshape
Printing: The to prop pieces need to be printed on their flat sides (especially the shaft). Depending on your printer tolerances, you might need some glue to hold the assembly tight.
What for This is a replacement for a lost hook. you can see the original (from the other bag) and this one side by side. Printing The model is optimized for printing in this orientation: Consider 4 or more walls or a "strong" profile.…
Why I had this old bike lamp and an old nokia cellphone suction cap mount laying around. I used the bike lamp for lighting my tinkering activities and it came to me that both could be a usefull combination. I have pulished the nokia…
This allows to screw a Suction cup with a M4 Screwterminal to other things. Either my insulating blanket as shown on the pictures, Or just use it as is, you can tie a rope to it. You will need: A suction cup with M4 thread. I used one of…
This fixes the broken loop on the MI Band 8 Wristband. Print in provided orientation Insert the little Bridge part. This is a little difficult. Add the hook part and slide the bridgepart over the hook part Finally insert the band in the…
This is some kind of organisation Tray that holds the stuff, even while you are driving.
More information on the car: Melkus RS 1000 - Wikipedia More information on Number 31: Melkus RS 1000: Verkehrsmuseum Dresden kauft DDR-Rennwagen
A Housing that catches the shavings. These pencil sharpeners are usually sold without a Housing. It is made for the dimensions given in the picture (in mm) / filename. If yours has different dimensions, then scale according to your needs…
Why two soaps, you might ask? Some use shampoo and conditioner in solid soap form. To distinguish between them, you might want to print the two sides in different colours. The concave shape for each soap has a diameter of 75mm. Printing…
These are all currently available results.
![Vacuum Attachments [Severin HV 7146] _Remix](https://media.printables.com/media/prints/1102126/images/8353343_b46cf285-5de2-4bd7-a6f3-d0db71c9d9f2_88c6be9a-e6b3-4798-9088-7ef92ea74112/resized_257.jpg)
