Counting matching models…
Updated October 1 2023: Made a deep basin that will fit all of the sieves so you have a proper size container to sift into without making a mess. Added because as I've used the sieve with Walnut shell, tumbler shot, porcelain beads, etc…
Update: Jan 19th - Got rid of the aligner tabs, they served no major benefit to the design and overlaps should be more than sufficient. Modular wall mounted vinyl/rolls storage for Cricut, Scisor or any other brand. Print only the Top and…
No Supports Print with 0.6mm nozzle for fastest quality prints.
Female thread to fit Siraya, BlueCast, PowerResin, ApplyLabWorks and probably others. Male Thread to Elegoo/Anycubic/Prusa (old) brown resin bottle Lid. Double check your printers tolerances! I have printed these threads using PETG with…
Nothing says “I have arrived” quite like a useless brand stamped brick.
Update Jan 26 2022 - After using this build for a few months, I recommend against any plexiglas. It still works great, but due to the statically charged nature of plastic sheeting, it's been nearly impossible to keep clean for long and…
No Supports Print with 0.6mm nozzle for fastest quality prints.
Printing Tip: Tilt the ring on the X axis by 2-5 degrees to the face isn't parallel with the build plate, this will possibly introduce some print lines across the face that will need to be sanded off post casting. However tilting will…
Update January 10 I created a highly accurate .dxf/svg file of the SL1S precut FEP sheets and based this design off of that. Use double sides tape to hold the template down onto the protective plastic covering the FEP. I used a 2mm…
No special print recommendations, clean build plate for good adhesion, mouse ears or brim if corners lift, 10% rectilinear infill for speed, doesn't require exceptional structural support. With above settings approximately 600grams of…
1:1 scale Elegoo Jupiter Build Plate Use for reference as needed, renders, etc. Insert into Slicer for visual representation during slicing. Ready to import into PrusaSlicer as a virtual build plate. Create a copy SL1/SL1S Printer Profile…
Yet another resin calibration object, hopefully we don't need these some day. -Designed specifically for jewellers to slot stones of 6mm, 5mm, 4mm, 3mm, 2mm, 1.5mm, and 1mm and test exactly how accurate a resin print will be in reality.…
Siraya/ApplyLabWorks/BlueCast/PowerResin Bottle to Elegoo/Prusa (Old)/AnyCubic Resin Bottle Adapter, specifically designed for transferring resin between these bottle types. *Double check that there is a good seal before leaving bottle…
Print multiple in different colours to sort puzzle pieces by feature, colour, edges and corners, etc. Organizers nest and can stack for easy sorting and storage. Printing Recommendation: Recommended using ‘Perimeter Generator - Classic’…
Scaled up model of a Piercers needle, for teaching piercers the geometry and how it works. Total model height, 14" Printable on Prusa Mini Use Brim Supports on the bottom tab openings if you have trouble with droopy Bridges. If you want…
Autofill Adapter for Elegoo Jupiter Female thread to fit Monocure, MACK4D, Wanhao, Monoprice, eSun and probably other premium aluminum resin bottles. Male Thread to Elegoo/Anycubic/Prusa (old) brown resin bottle type. Double check your…
No Supports Print with 0.6mm nozzle for fastest quality prints.
Basic tower for displaying Ear Weights and earrings. Connect multiple bases together with the optional dove tail connector. No supports required on the base if your bridging parameters are good. Use 0.4mm nozzle for bases, the steep slope…
Use the Z Axis to its fullest and stack smaller parts in multiple tiers. 40mm Clearance, designed to fit Elegoo Saturn Build Plate. Use the individual components to modify or build your own.
I added holes for Brass inserts to be hot pressed, this will allow the fan (and carbon filter if desired) to attach to the hose adapter and push air through the hose. You'll need: 4 x M4 20 screws 4 x Short Brass threaded inserts
Combination of two models: https://www.printables.com/model/1067564-funnel-for-heygears-resin-bottles/files https://www.thingiverse.com/thing:3135135
Double ended, threaded adapter for transferring the same (or not?) resin from one bottle to another without spills or accidents. Make sure that you're not overfilling the bottom bottle… Fits Siraya, Bluecast, PowerResin and ApplyLabWorks…
Because I have multiple tanks and all the tanks look the same it's gotten hard to keep track of how many prints are done on each one, and which one had which type of resin in it. So I made this labelled FEP Counter which you can glue or…
Maximize your Jupiters already huge print volume with Part Stacking and utilize the entire Z Axis. Use this Stacking Kit and construct a huge volume of up to 7 layers in your favourite modelling software.
Included SVG for cutting custom fitted sandpaper. 3 inch diameter. 6mm centre hole. Ideal print material would be either extremely hard and heat resistant or slightly flexible depending on the results you want to achieve from the tool.
Altered the vacuum end fitting to fit another Ryobi product.. silly that this even needs to exist. Embossed both ends of the model so there is no question. Best printed with a thin brim if you don’t fully trust your plate bed adhesion. No…
Specifically designed to fit Sunstone Orion Pulse Arc Welder microscope. Use main camera only, 2x zoom to limit vignette. Phone should fit very snug with minimal play, use 2-3 piece of electrical tape on the inside top edge tighten phone…
Adapter component only for Katz Teleprompter. Best printed in PETG, very snug secure fit with the adapter ring. Designed to specifically fit Neewer Macro Light/Flash Ring, which comes with a set of rings for various lens sizes. Can be…
Specifically designed to hold Andu Engraving Mini Pad diamond discs. Used to sharpen Gravers for pneumatic engraving. Works work GRS and Lindsay Templates.
1:1 scale Peopoly Forge Build Plate. (Oriented properly for upside down and centre origin) Import into supporting slicers (such as PrusaSlicer) to have a visual, front/back oriented build plate under your build area, or whatever.
Designed to fit 3/32" (2.35mm) bur shafts. Store the box in the organizer and have 1 bur at the ready. Room for extra boxes. Catch all trays for burnt burs or what have you. Printing Recommendations: If printing with FDM machine, use…
Help newcomers to engraving visualize an otherwise very small and precise geometry. When fully assembled this model is 35cm (14") tall. Make sure your printer settings are dialled in so that the halves fit together. No glue should be…
Holder/Organizer for Rubber Flask bases, wall mountable. Designed to fit 5" (though it will fit other sizes as well)
Designed to fit with Vivosun hydroponic systems: VIVOSUN LumaRay LED Light Bar 1.4' https://amzn.to/3S0likB VIVOSUN Hydroponic 54 Plant Grow Wall Mount Kit https://amzn.to/4uH5bH6 Designed these these 2 brackets to mount the hydroponic…
Emerald/Baguette Bezel setting for 6x8mm Emerald/Baguette stones. Each piece offers 6 attempts at setting, learning made easier and economical. Presprued and supported options. If you choose to make your own, these stones fit perfectly:…
Emerald/Baguette Bezel setting for 6x8mm Emerald/Baguette stones. Each piece offers 8 attempts at setting, learning made easier and economical. Presprued and supported options. If you choose to make your own, these stones fit perfectly:…
These are all currently available results.
