Counting matching models…
I could not find a scraper sporting a hex pattern, clearly this had to fixed. Perfect for scraping prints off your build plate, as well as your other scraping-needs. Should be printed with .15 or smaller layer height to make the edge…
A simple filament clip which prevents the filament from unwinding reliably! I've tested many filament clips in the past, but couldn't find one that I was 100% satisfied with. Out of this need I have designed this small clip! Since I read…
Purely mechanically controlled filament winder for Bambu Lab P1, X1, X1C or X1CC 3D Printer. Printed on Bambu Lab X1 CC. Watch the videos first at the bottom, at the end of the description. If there is news about the model, you will find…
News 2024-04-10: Please also check out my new Blade Dispenser for this Bed Scraper: This is the XL version of my popular Optimized Bed Scraper with quick-change blades. The cutting edge of the blade is 45 mm, a full 30% longer! Each blade…
This is a combination tool to help disconnect the PTFE tube and the AMS cable. I had seen some small separate versions, I wanted to make a combined tool that I can hang from my wire shelving unit. There are also holes to hang from a peg.…
This design improves the original Bambu Lab reusable spool holder in the following ways: Allows you to see how much filament is left on the spool and uses less filament to print the spool due to the hexagon pattern on the sides. Also, the…
Follow the Mikolas Zuza's tutorial article on: https://www.prusaprinters.org/cheap-simple-3d-printer-enclosure/ Plexiglass dimensions: 3pcs: 440 x 440 mm, thickness 3mm 2pcs: 220 x 440 mm, thickness 3mm If you have a 3D printer with MMU2S…
I redesigned from scratch my favourite silica container by Malolo. I loved absolutely everything about it, except that it prints a little slow. I used horizontal slots so that it prints much faster with less retractions and hops. In 0,3mm…
IMPORTANT Please download the "BentoBoxV2 2023XXXX.3mf" project 3mf file and “BentoBox20 User Guide 2023XXXX.pdf” Descriptions, BOM and build instructions are in there. I try my level best to make it as comprehensive as possible. Use only…
Print in PLA so you dont damage the printbed. Check out the new larger model at: https://www.printables.com/model/291609-bed-scraper-mk2-8g-25min Still uses only 8g and prints in 25min. Print instructions Click print =)
UPDATE 3.1.2023: added V2 version with different inner shaping → same external size & characteristics, quicker print Info: 🟠 round edge → longer edge → scraper lasts longer then other spatula types scrapers if it is less sharp on one…
The model of the tension meter helps you control the tension on the belt of your Prusa printer. It's specially designed to check the tension of your Prusa printer's belts. It works with Original Prusa i3 MK3/S/S+ with the belt GT2. How to…
About the Scrapers: With a length of 86 mm and a thickness of 5 mm, the scrapers are very compact. The grooves on the side of the handle provide a firm grip. The angle of the front wedge is 26.6° and is therefore quite robust. Of course…
The one spool ring to rule them all! Bambu Lab doesn't recommend using filaments with cardboard spools with the AMS, as they can produce dust and block the rollers or the cardboard edges could fray, causing issues. By snapping this model…
1.75mm filament clip with screw. One size fits most spools. 31 October 2022 update New body with tearshaped screwhole to fix issue with screw being too tight. Added screw model from second edition of filament clip. Second Edition…
Filament clip works on many spool brands including Prusament, Amazon Basics, Overature, Hatchbox, AMZ3D and others. Very simple design. Version 2+ , added March 15, 2024 incorporates slightly smaller filament clasps and reverses the two…
This splicing jig makes quick work of joining filament ends. Use a soldering iron tip to melt the ends of the filament segments and then shove together for a perfectly aligned joint. Then clean up the joint with file, razor blade or…
Dieser Bed Scraper ist das ideale Werkzeug für alle, die ihre 3D-Drucke sauber von der Platte bekommen wollen. Es wurde speziell entwickelt, um das Druckbett vorsichtig zu reinigen und fertige Drucke sicher zu entfernen, ohne die…
This is my remix of the 1.3 version of the popular Poop Bucket from @Mikyleee It is basically an optimisation of the original design but is functionally the same. This remix eliminates a rear wall to use less material and makes overhangs…
Description With the Nextruder, you have two ways to change the nozzle - you can replace the entire hotend or just switch out the nozzle without removing the whole assembly. However, changing just the nozzle involves some risk. You need…
REPRACK 2 IS HERE!! NOTE: We now have a CLUBS page for exclusive RepRack upgrades like our Parametric Modular Shelving, RepRack XL as well as other cool stuff. PLEASE consider joining to support more development of this handy storage…
Print No supports needed. Tested with PETG and PLA. Material One segment from snap-off blade 18 mm ( example 1, example 2) 2 pieces of screw M3 x 25 mm 2 pieces of ball pen spring (probably 20 mm length, 4 mm diameter, M3 screw must fit…
These are corner brackets designed to suit System 2020 (2020/2040) extrusion. They can be used to build or strengthen/reinforce 3D printer frames and to assist in vibration isolation of vertical frame components such as the Z axis…
All printable parts for your Original Prusa Enclosure . The parts are divided into folders as they arrive in the multiple bags from the factory. In file others you can find part needed for the Silver PSU. All of the add-ons and community…
V2 for Prusa CORE ONE L, CORE ONE +, XL and MK4S now available! This is a remix of the Rugged Box from Whity with six different Prusa versions Changelog for V2 - available for Core ONE, Prusa XL and MK4S Updated size of the box Updated…
These boxes are specially designed to be printed really fast and also to have as many holes as possible to let the wet air reach the silica-gel inside. The screw cap is an easy and durable way to close the box and also open it again to…
News 2024-04-04: Upon request, I designed an XL version of this scraper with 30% longer blades: News 2024-03-10: Please also check out my new Blade Dispenser for this Bed Scraper: Optimized Bed scraper with replaceable blades Since the…
The Polymaker spool adapter is designed to help your cardboard spools print more consistently by reducing friction and creating a structured rolling surface. The spool adapter clips around the face of the Polymaker cardboard spool and is…
Prusa Steel Sheet Holder for 2, 3 or 4 steel sheets. Print instructions Print in PETG or PLA with 0.3 layer hight and 5% cubic infill. Added a new, wider steel sheet holder for 2 sheets.
Simple button to make removing the PTFE tube from the AMS buffer a little easier. There are 2 versions. One is a permanent install, and the other slips over the tube so it can be removed.
This version of the spool holder is WITH hole for humidity sensor. Drybox is designed to be placed on the right side of the enclosure. Blog article: Drybox build instructions .
This was a well designed model but I didn't like that it was too tall to use with the stock cover. While I was shortening it I saw room for some improvements so I made the following changes: Reduced overall height just enough to fit the…
K2 Clip The K2 Clip is a unique design with multiple locking points. No matter what, there will be a locking point facing up. The clip can be left to "float" on your filament spool while printing. Extra secure storage using the locking…
Printable accessory developed specifically to enable you move your Original Prusa Enclosure around easily. The handle is symmetrical, but you need to print 2 pieces. Check the guide on how to install the Transport handles . To mount both…
Wanna get the commercial license? Have a look at my printables club. Your wished logo isn't available? Ask me! Maybe I make it. ;-) I have created a helmet hook, which has a wide contact surface so that the padding of the helmet won't get…
This is my profile for the K1 Max in OrcaSlicer. It contains the printer config, 2 printing profiles and a material profile for the included HyperPLA. Also included are a model for the build plate along with the texture image, see below…
Simple filament clip, works with any 1.75 mm spool. Print instructions Yes. Indeedio. Yet another filament clip lmao... I looked and tested many, almost got so bored of it that wanted to give up. But I simply needed one working desing to…
Description With the Nextruder, you have two ways to change the nozzle - you can replace the entire hotend or just switch out the nozzle without removing the whole assembly. However, changing just the nozzle involves some risk. You need…
This innovative tool simplifies print removal with its user-friendly design and unique features. The random pattern design ensures fast print times. No supports are needed, as the model will print fine without them. Durable and reliable…
UPDATE 3: I have now added a fourth version as per request by someone in the comments. This fourth version is both shorter and narrower. I have also removed all files and reuploaded with better naming as it was getting confusing: V1.0 is…
Bau einer sehr einfachen und günstigen Filament Trockenbox für rund 10€. Gebaut aus einer Vorratsbox und ein paar Teilen aus dem 3D-Drucker. how to build a very simple and inexpensive filament dry box for around €10. Built from a storage…
CIUNCARELLO boats a distinctive design and features that sets it apart from conventional bed scrapers, making it the ULTIMATE Accessory for your 3D Printing needs. 8x6mm Magnets are strategically placed at both the front and back ends…
This is a useful Blade Dispenser for my new Optimized Bed ScraperXL with replaceable blades. The dispenser holds 44 blades and has a hook to which the bed scraper can be attached. Double-sided adhesive tape can be used to attach the…
Update 11 Jul 2023: It has been a year since I designed the PMS (Poop Management System) for Bambu Lab printers. So many things have changed and so much development in the way we approach slicing & printing. I am doing an update and also…
“v2” version has no label area in case you want to save even more filament. Otherwise, print the “v3” versions. The original Bambu Lab spool holder works well but takes a lot of filament and is missing a few nice features, such as being…
With the Nextruder, you have two ways to change the nozzle - you can replace the entire hotend or just switch out the nozzle without removing the whole assembly. However, changing just the nozzle involves some risk. You need to grip the…
Print in place with PETG Z=0,3 and without support. Position This way W
Filament Clip V2: fast and easy to print. More durable and does not come off the coil, a problem that was present of the v1 version.
In order to find the perfect fit for your setup, just print a bunch of these with different scaling in Y/X-direction (+/- 10 %). MicroMax Standard The card is recessed by 6 mm and will fit every typical card slot. I tested these with my…
All printable parts for your Basic Board + PSU Add-on. Basic Board + PSU Add-on is needed only if you have Advanced Filtration System or/and White LED Strip Add-ons You have the option to print two different holders for two different…
I just put some files Together, added some walls and here we are, a Box to store the Bambu Labs Tools and Printheds. Release Note V2: I got some feedback to improve the design: Issue on the outer shell solved (small edge), this is now…
Necessary commercial parts 4 stainless steel “608” bearings. These are the same as the spooler bearings that come with the Prusa MINI. 8 cap screws (M3-15 or M3-16) 8 nuts (M3) Foam rubber sheet with adhesive on one side. Recommended…
Always wanted a simple tool for joining filament pieces together - when the spool runs low or to join DIY multi color filaments ( Easy Multi Color Filament ). I remixed LoboCNC's fine Filament Splicing Jig : Added compliant hinge to make…
Customized version of https://www.thingiverse.com/thing:2404850 , with added labels on top, to show the grit of sandpaper used. They go from 80 to 3000. If your sandpaper is a different grit, there's a blank top template provided. With…
This is a fully parametric storage box with a hinged, snap-fit lid , designed in OpenSCAD (you need to install BOSL2) . All key dimensions can be adjusted, making it easy to adapt the box to your specific needs. The design is optimized…
Also check out the rugged box. Filament samples with a box with space for 30 pcs. One sample in PLA with standard settings for Prusa takes about 20 minutes to print. The box took me a little more than 5 hours. Three fields that are 0.2,…
"Slightly" overengineered flexible steel sheet holder for MK and MINI printers to be screwed to a shelf. It's also extendable to as many as you want. Variants for other steel sheets: Prusa XL Bambu Lab A1 Support my work For non-Prusa…
You like your filament dry ☂. And yes, there are some silica gel boxes out there already. But most of them are a bit too generic are lacking features like a hollow core … … or a bearing mount option to work as a filament roller. 😍 And…
I included the exported files, stl, and printed images. I printed this with 10% infill and 2 walls. .20mm layer height. It uses 380.33 grams of filament with .28mm layer height at 10% infill and takes roughly 8h50mins to print on standard…
Due to the way the Bambu Lab AMS Buffer is designed, disconnecting the PTFE tube and the control cable can be difficult. The tube coupler's release ring is recessed inside the buffer, and the cable's release clip is between the cable and…
Remodelled version of Filament Dust Filter by sneakypoo . Almost identical to the original, but remodelled from scratch in Fusion 360 making it parametric so it's easy to tweak and sharing the F3D file so anyone can easily customize it.…
This is a spool winder for transferring filament from one spool to another. Inspired by the need to use certain filament spools for the Bambu Lab AMS. This build should speed up the process and give a nice tight winding. There is room for…
A double-sided tool designed for easy cleaning and lubrication of Z-axis lead screws. One side features grooves shaped to match the trapezoidal thread, allowing the tool to follow the screw profile and evenly spread grease along the…
Overview: This is my version of machine to recycle PET bottles to filament for 3D printer. Here you can see my setup with two units in operation. Bill of Material: Base Plywood 150x600mm (one unit) Spooler Body 1x Spooler_Side_Right.stl…
A large collection of seasonal holiday cookie cutters to get you into the holiday spirit. Prints best in PLA (PLA+ if available), at 100% scale. You may need to scale the model up slightly for some printers so that the walls are thicker…
Printable accessory for Original Prusa Enclosure developed to enable access from the top. Can be used for a standalone printer or for a printer with a multi-material unit on the frame. Check the step-by-step guide on how to install the…
Article with build instructions: https://blog.prusaprinters.org/dryboxes-and-alternative-spool-holders-not-only-for-multimaterial-upgrade/ Material: Prusament PLA Galaxy Black
The ULTIMATE filament spool holder. THANK YOU FOR DOWNLOADING IT! IMPORTANT, PLEASE READ: 1. If you have problems with tolerances, please print this model by Asraff Amzani (thanks for) and carefully read the descriptions. THIS IS…
Overview: After success of my firts PET Filament Machine I decided to build new one which will be more compact and neat. Here you can see the new machine in operation: Assembly Instructions: You can find an instruction video with assemby…
Just a simple phone stand. Enjoy. Credit to…
This set of holders for filament spools can be mounted to the popular IKEA SKADIS pegboard. In order to hold one spool there are always a left and a right part which belong together. By selecting the appropiate distance (=holes) between…
Based on Spool holder from Prusa Research ( https://www.prusaprinters.org/cs/prints/88353-spool-holder ) and One Piece Spool Holder from dot_dob ( https://www.thingiverse.com/thing:2036761 ). Edit V1: added spool holder for wider spools…
Basic Toolbox – Creality Ender 3 V3 SE This toolbox has been adapted for the basic tools that come with the Creality Ender 3 V3 SE 3D printer model
I live in an extremely humid climate, and this is by far my favorite storage solution to keep my filament dry and ready for printing. Props to Stephen Wardlaw for the basic concept. I've taken his design idea and tried to improve on it in…
Optional accessory for Original Prusa MK4/MK3.9. Print the G-code or slice your own version using the .3MF file. Use PTFE tubes and fasteners included in the package. For more information regarding assembly, follow our step-by-step guide:…
Note added Oct. 5, 2021 : As some people have had problems printing this without infill, I have added files for 15% rectilinear infill. This scraper can be safely used on the build plate with little danger of scratching or gouging the…
Spool Winder Spool winder for filament and other spools with a maximum dimension of 210mm in diameter and 76mm wide. If the spool axle is inset then wider spools may be accommodated. Spools should be a minimum of 30mm wide with an axle…
How-to video series: https://www.tiktok.com/@function.3d/playlist/PETALOT%20Build-7340398832935521056 Instruction Manual : https://docs.google.com/document/d/1J9RF3sPK-0WwBR4Ce06RCnpbVmlk7zAESvQx1utmXmc/edit?usp=sharing Electronics,…
This little rake prints with a tiny brim on the end you should cut (not peel) off. Decongest your fan! This rake doesn't clean ALL the debris from your fan. Please be aware this is only a rake and your fan still requires periodic…
Hey, since the cleaning with several paper towels has always annoyed me, I have designed this small but helpful tool. You just click it into the Lead Screw and move the Z axis completely. If the lead screws are very dirty, you can repeat…
IMPORTANT - VERSION INFORMATION This listing represent V1, the main and current version of the system. An earlier ''Early Release'' version is still included as a legacy option for users who only want a press-fit, tool-free assembly.…
When 3D printing, it is crucial to have a level print bed to ensure proper adhesion of the printed object. If the bed is not level, the print may fail to adhere properly and can potentially peel up during the printing process. To check if…
This is a remix of my PrintDry Pro spool adapter (which in turn was a remix of a Thingiverse design by Skrutt84: Ender 3 - Filament holder DELUXE). This winder will fit spools with center holes up to about 80mm diameter. Use with a…
PLEASE READ THE PRINT INSTRUCTIONS! TRIM IT AND DON‘T GIVE BAD RATING JUST BECAUSE YOU CAN‘T READ INSTRUCTIONS! After printing i cut the front of the shaper to make the tip a little bit more stiff and when cutting it angled it will be…
Heads-up News Heads-up #1: there’s a newer version of this here: https://www.printables.com/model/1247920-new-v30-of-top-riser-set-for-flashforge-adventurer Also, heads-up #2: There is a helpful new “guard plate” improvement remix…
Filament clip 1.2 Now also a mini version to better adapt for full spool, it results also easier to put in place. Really easy to print and use. No hole to insert the filament. Thanks to kennyd1gital for the remix version, it works good…
The lovely 🥰 TurtleNeck filament buffer is somehow missing internal cable management and any protection 🫢 for the Omrons' pins. But no worries, that's now solved 😉. And while extending the frame and lid for improved cable management and…
Light bar for the Prusa i3 MK2/S and MK3/S/+ available in single light, dual light, and MMU2 compatible dual light versions. Mounts are designed to fit 9x17mm aluminum u-channel and have a hollow interior that is used to route the wires…
23 June 2024 - NOTE: Updated model of the insert to accommodate the longer allen keys that are being shipped with new printers. This tool box holds all the accessories and tools that are shipped with the Flashforge Adventurer 5m and 5m…
Esta caixinha possui duas versões, com imãs para travar ela fechada ou sem os imãs. Você vai precisar de dois pedacinho de espuma, eu utilizei esponja de cozinha. Se for utilizar a versão com imãs, vai precisar de 4 imãs 3x2 mm - Diâmetro…
NOTE: While still in use by a lot of people, this version of the drybox system has been deprecated in favor of the updated one here: My previous filament drybox model became more popular than I ever imagined, and after taking on a lot of…
UPDATE!: I have revised the original Overture Spool Adapter based on feedback and experience after creating my Polymaker Spool Adapter. Version 2 of the spool adapter works just like the original except, I have added the small retention…
9/22 update - added the XL & XXL Sizes Watch out YouTube video on how we made this! CLICK HERE FOR ASSEMBLY INSTRUCTIONS AND MORE DETAILS
Stubby version now available here: https://www.printables.com/model/623552-stubby-allen-key-handles Updates: 12-11-2023 - Added size 5,6 and 8 Ergonomic Allen key handles for multiple common allen key sizes used for 3d printers. More…
All around best spool holder design that requires no support and mounts with common screws. It has been tested with a 1 kg spool and can be mounted in various positions. This is perfect for mounting in an enclosure, on a wall, under a…
I have combined the best features (in my opinion) of three previous remixes of the Bambu Lab spool. I started with the refactored “Bambu X1 Re-Usable Spool” as a base, then added the best features of the “Improved Bambu Lab Reusable Spool…
Inspired by Mikolas Zuza Link: https://www.prusaprinters.org/prints/10-extruder-rotation-vizualizer What you need: Super Glue 8x3mm Neodymium Magnet 3D printed Visualizer Montage: Just glue the magnet correctly in the center of the circle…
Just a simple cube for downloading and modifying.
![[Use M3 screws] Spool holder for Prusa MINI Flexible](https://media.printables.com/media/prints/62910/images/657225_6e3e876b-c636-4d75-9a4a-d73aa241cde4/ming-cheng-wei-she-ding-3.png)
