Search results: 05

Sort order

3,540 models

P
Printablesgeektoybox

Logitech C270, C310 and C505 Focus Wheel (Complete)

I found this focus wheel at https://www.thingiverse.com/thing:714475 , but it was 11.1mm thick and it made my camera look like a toy so I created a much slimmer one. My final design comes in at 4.4mm so it is much more compact and works…

Print approx. €0.73–€0.89 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
2,789
Likes
423
Rating
4.94
P
PrintablesMouky

Segway Navimow i105e Messerteller für 6 Klingen und + 2cm Schnittbreite

Messerteller für den Navimow i series. (getestet auf einem i105e, sollte auch für den i108e passen) 6 Klingen und 20cm Schnittbreite (original hat 3 Klingen und 18cm Schnittbreite) Benötigt werden neben den Klingen und den Schrauben nur…

Print approx. €3.98–€4.86 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
769
Likes
48
Rating
5
P
PrintablesJaroslav Pašek

RC TATRA 805 DVS-8 V MEŘÍTKU 1/10

RC TATRA 805 !! Zjistil jsem že zadní ramena nesedí a bohužel se špatně nahráli, pracuji na opravě chyby, také bohužel nemám čas na zpracování návodu tak přidám alespoň nějaké fotky ze stavby v případě nejasností mě neváhejte informovat.…

Print approx. €0.94–€1.15 excl. taxPreliminary estimate for one variant

Downloads
592
Likes
113
Rating
5
P
Printableszuberio

1S2P 18650 Vase Mode Holder With TP4056 & MT3608 Boards Slot

This is a vase mode print I designed to hold 2 18650 cells as well as a TP4056 charge/protection circuit & MT3608 DC-DC boost circuit. Here's the link to where I bought the circuits from. https://a.aliexpress.com/_mNJGjrV 0.2mm layer…

Print approx. €1.14–€1.39 excl. taxPreliminary estimate for one variant

Downloads
359
Likes
86
Rating
0
P
Printableszuberio

Heltec V3 Case with 18650 cell and TP4056 charge controller

My own design for a Meshtastic/Meshcore Heltec V3 walkie-textie that also holds a power switch, 18650 Li-Ion cell, & TP4056 charge controller. As a bonus, everything is held together by a single M3x10 pan head screw. Bluetooth/Wifi For…

Print approx. €3.11–€3.81 excl. taxPreliminary estimate for one variant

Downloads
348
Likes
72
Rating
5
P
Printablesjnr0790

TP Link TL-SG105 Mounting Plate

This is a remix of this mounting plate by asp55 on Thingiverse. This one has the inserts a bit closer than the original to fit newer TL-SG105 switches. Just use double sided tape or whatever you want to mount the plate and attach the…

Print approx. €2.01–€2.46 excl. taxPreliminary estimate for one variant

Downloads
320
Likes
22
Rating
5
P
Printablesscolin221

Cleat Pedals - Clip into Shimano Road Bike Pedals - Remixed for Shimano SPD-SL PD-R550 and 105 PD-R7000

This is a remix of https://www.thingiverse.com/thing:3669328 . I've gotten permission from the original creator to post this remix. I've made a simple edit to the STLs to remove the raised edges from the bottom to allow compatibility with…

Print approx. €2.44–€2.98 excl. taxPreliminary estimate for one variant

Downloads
311
Likes
20
Rating
0
P
PrintablesOwen S

Toyota Tacoma 05-15 Bed Side compartment NRS Strap or tool Holder

This design replaces the smaller side compartment on Toyota Tacoma 2005-2015 models. This model includes a latching door mechanism based off of the latches on the two larger side hatches in the bed and off of @AP_81926 original model for…

Print approx. €0.28–€0.35 excl. taxPreliminary estimate for one variant

Downloads
287
Likes
81
Rating
5
P
Printables_KaszpiR_

18650 charger via HW-373 TP4056 USB-C module

About Quick and ugly remix to allow charging 18650 via HW-373 TP4056 USB-C module, which has larger diameters. The external dimensions are the same. Lithium Battery Charger Li-ion Module TP4056 USB C mock up was used to alter original N…

Print approx. €0.06–€0.07 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
278
Likes
39
Rating
5
P
Printablest0b1

Hanger for TL-SG105 network switch

Wall mounting bracket for our TP-Link TL-SG105 network switch.

Print approx. €0.20–€0.25 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
264
Likes
23
Rating
5
P
PrintablesBen

2.5G Ethernet adapter bracket for Optiplex Micro 7050

Installs into the secondary display port, just above the built-in network and USB ports. Requires: 4x M3x4x5 heat-set inserts 2x M3x8mm countersunk screws Also uses 2 screws removed from the original metal bracket Potentially worth…

Print approx. €0.31–€0.38 excl. taxPreliminary estimate for one variant

Downloads
234
Likes
25
Rating
5
P
PrintablesSteve

IC-705 Antenna Stabilizer

This is a design I whipped up to provide stabilization for the BNC connector on an IC-705. It utilizes the ground lug and the little handle thing on the back to provide 2 points of solid connection. Print instructions I printed this with…

Print approx. €1.37–€1.68 excl. taxPreliminary estimate for one variant

Downloads
189
Likes
20
Rating
5
P
Printables4nthonylin

DPS5005 Case

A 3d printed case for the popular DPS5005 running OpenDPS. I CNCed the side panels from a 1/8in acrylic panel. You can also 3d print them if you want. Follow the Datasheets to get the correct connector housings and terminals to interface…

Print approx. €0.63–€0.77 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
172
Likes
30
Rating
5
P
Printablestyeth

Wide Range Temperature Tower 270c-205c

Start:270c, End:205c. This is a remix of ABS+PLA to get a better test range for PETG and other filaments. Sadly I did a poor job (using Windows 3D builder) and my layers are off by one, however it still performs the job adequately.…

Print approx. €4.17–€5.09 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
153
Likes
8
Rating
5
P
PrintablesClamikra

Knipex 38,5mm Pliers Holder for Skadis - (Knipex model No. 70 15 110 and 08 05 110)

This is a holder for Knipex pliers for the Ikea skadis pegboard, printed in one part. It fits Knipex model 70 15 110 and Knipex model 08 05 110 I designed this model completely new from scratch, but it is inspired by Aaron s Knipex holder…

Print approx. €1.73–€2.11 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
140
Likes
19
Rating
4.75
P
Printableskyleireland

Wemos LOLIN D1 mini V4 - TP4056 - BMI160 Holder(s) - SlimeVR or other - Split and Combined

A little helpful file for making cases to hold either; Wemos LOLIN D1 mini V4 TP4056 BMI160 Holds these parts loosely. Handy for making a case for SlimeVR Open Source VR Trackers - Github - Docs - Schematics Option for my first test in…

Print approx. €0.32–€0.39 excl. taxPreliminary estimate for one variant

Downloads
137
Likes
7
Rating
4
P
PrintablesAlison Foster

Dethleffs Trend 7057 Motorhome Waste Water Key

Waste Water Key for Dethleffs Motorhome Grey Waste, we have glued and put a screw in the tighten it (also put some duck tape on to make sure its tight) at moment its working very well

Print approx. €0.89–€1.08 excl. taxPreliminary estimate for one variant

Downloads
133
Likes
15
Rating
4
P
PrintablesAdrienAG

Gun4IR GunCon 2/G-Con 2 Solenoid model 0530 Support

This is a no cut mod support for a 0530 solenoid (without the rod) model to fit in a Namco GunCon 2 made to be compatible with Gun4IR official PCBs. Solenoid model 0530 comes in different varieties 0530, 0530B, 0530T. The two with the B…

Print approx. €0.54–€0.66 excl. taxPreliminary estimate for one variant

Downloads
109
Likes
8
Rating
5
P
PrintablesAdam Fuchs

Krabička na modul TP4056 / TP4056 module box

Do krabičky se zacvakne modul a zdířky zašroubují, vrchní krytka se zacvakne. Gcode je udělaný na všechny díly, tedy obsahuje oba dva typy krytu. Kryt bez dírky je pro kompletní uzavření, ten s dírkou je tam proto, aby bylo vidět dovnitř…

Print approx. €0.78–€0.95 excl. taxPreliminary estimate for one variant

Downloads
109
Likes
18
Rating
0
P
PrintablesJamie

RAK5005 Case

We've all been there, excitingly powering on your arduino with the program you just coded. Only for the arduino to release the magic smoke because a solder ball or a metal object on your workbench shorted it. This skirt helps to prevent…

Print approx. €0.14–€0.17 excl. taxPreliminary estimate for one variant

Downloads
108
Likes
18
Rating
0
P
PrintablesBryant

Tischbein verstellbar 105mm (+20mm)

sehr einfach zu druckendes & stabiles Tischbein

Print approx. €7.33–€8.96 excl. taxPreliminary estimate for one variant

Downloads
90
Likes
6
Rating
0
P
PrintablesGreatOldOne

Dual DPS5005 Bench Power Supply

Power supply using two DPS5005 units, and a 48V DC power supply unit. It requires a handful of other components that you can easily get from a local electronics store or on line (binding posts, power inlet etc) The PSU is an S-500-48.…

Print approx. €5.81–€7.10 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
89
Likes
15
Rating
0
P
PrintablesJERRY

Govee H6056 adjustible Simrig mount

Needs 2x countersunk Screw for Rigmount is designed for M8 2x M6x30 socket head screw & 2x M6 nut for mounting the light. the design allows for about 30degree of tilt in each direction

Print approx. €0.81–€0.99 excl. taxPreliminary estimate for one variant

Downloads
84
Likes
8
Rating
5
P
PrintablesOwen S

Toyota Tacoma 2005-2021 Bed Side Rail Torque Knob (Knob only not torque spring)

This knob replaces the bed cleats, adjustable torque knob. This is only the model for the knob itself not the torque spring. Compatible with Toyota Tacoma 2005-2021 models.

Print approx. €1.75–€2.14 excl. taxPreliminary estimate for one variant

Downloads
76
Likes
36
Rating
0
P
PrintablesMarc

New Version 2: Replacement fix for BOSCH fridge door tray 00705901 // Ersatzteil Bosch Kühlschrank Türfach

The mounting of the door tray failed on my BOSCH fridge. So here is a little Model to fix the broken mounting. This is a improved -more sturdier- Version 2. Printed with Prusament PETG Urban Grey . The print in the picture is from a MK4S…

Print approx. €0.30–€0.37 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
67
Likes
11
Rating
5
P
Printablesmstejska

Print approx. €0.46–€0.56 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
58
Likes
4
Rating
0
P
PrintablesSeaRaven1

2005 V6 Premium Mustang Seat Lever

This part is a replacement for the lever that is used to push the front passenger seat forward in order to access the back seats.

Print approx. €0.67–€0.82 excl. taxPreliminary estimate for one variant

Downloads
56
Likes
7
Rating
0
P
PrintablesKladrie

Mercedes Benz A/B Class seat adjustment handles - reinforced replacements for part nos. A1699190561/A1699190661

Given the disparity in our heights the front seats in her B200 are adjusted forwards and backwards rather regularly. This is done by lifting the lever under the seat, and scooting in the desired direction. However, while the Benz is in…

Print approx. €3.33–€4.07 excl. taxPreliminary estimate for one variant

Downloads
51
Likes
6
Rating
5
P
PrintablesJiří Novák

Tatra 805 - Kačena

Tisk na dvě poloviny, PLA, podpěry, výplň 10%, tryska 0,4.

Print approx. €3.83–€4.69 excl. taxPreliminary estimate for one variant

Downloads
47
Likes
4
Rating
0
P
PrintablesFranspai

Netgear GS105 switch rack mount for the microlab

The tolerances are a bit tight so you might need to sand it down a bit.

Print approx. €2.21–€2.71 excl. taxPreliminary estimate for one variant

Downloads
39
Likes
8
Rating
0
P
PrintablesKakemonster

Window Regulator 6205-25-016821P

Retrofit of window regulator 6205-25-016821P, used for WV / Audi. Printed mine in PTEG with supports, although the supports can be tricky to remove inside the small gap. Clips easily onto frame and was easy to mount correct. Included the…

Print approx. €0.70–€0.86 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
34
Likes
2
Rating
0
P
Printablesmstejska

Ammo box 45-70 GOVT 405

Box for ammo 45-70 GOVT 405

Print approx. €7.34–€8.97 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
30
Likes
1
Rating
0
P
Printablesoktkas

Prusa MK2.5/S Extended Electronics Case for XL4005

Print just like regular Prusa parts. Fits the frame just like the original. You need two extra M3 screws to mount the module.

Print approx. €3.71–€4.53 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
29
Likes
4
Rating
0
P
Printablessascha

Svbony SV705C Cable Comb + Fan Mount

This is a versy specific model as it was made to fit an SV705C astro camera that doesn't come with a fan by default. The mount provides special clamping points to mount a special fan onto it while also providing a cable comb for cable…

Print approx. €0.97–€1.19 excl. taxPreliminary estimate for one variant

Downloads
28
Likes
0
Rating
0
P

Connect 42390556 Mixer Coupler - Spojka motoru a čepele tyčového mixéru

Printed successfully on MINI+ from recycled PETG with 100% infill. Works magics.

Print approx. €0.28–€0.34 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
25
Likes
1
Rating
0
P
Printablesandyf27

TACX T3050 Spider Team Work Stand Extension

I found that none of my bigger bikes fit on my new TACX T3050 work stand. This adapter fits my XL frame full suspension fat bike with room to spare, so it likely fits your bike too! The end is tapered so you can press fit the extension in…

Print approx. €3.33–€4.07 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
23
Likes
2
Rating
0
P
Printablesthiebes

Mount for Hamamatsu Avalanche Photodiode (APD) C10508-01 with Voronoi vents

This is a mount designed for the Hamamatsu C10508-01 Avalanche Photodiode (APD) module . The purpose of the mount is twofold: 1) to enable the integration of the APD module into optomechanical setups; and 2) to provide a protective cover…

Print approx. €2.20–€2.68 excl. taxPreliminary estimate for one variant

Downloads
16
Likes
1
Rating
0
P
PrintablesRobotgrouse

Sleeve for #05 L-Spiel/L-Game - Logobox

A sleeve for “#05 L-Spiel/L-Game - Logobox” by ZDKderPHB To make it portable

Print approx. €2.31–€2.82 excl. taxPreliminary estimate for one variant

Downloads
12
Likes
3
Rating
0
P
PrintablesNordic

Playmobil 30510510 - Cannonball Replacement

If your Playmobil cannonballs go missing again because they’ve been fired all over the place, why not just print some new ones? The cannonballs are very easy to print using PLA. Place them on the print bed with one of the flat sides…

Print approx. €0.21–€0.26 excl. taxPreliminary estimate for one variant

Downloads
11
Likes
5
Rating
0
P
PrintablesAnas Msba

Protective Case for TP4056 JST Plug

this was an idea never finish it maybe it will help someone

Print approx. €20.36–€24.88 excl. taxPreliminary estimate for one variant

Downloads
11
Likes
1
Rating
0
P
Printablescombobulator

Lens Cover for Bosch GTC 400 C Thermal Camera (16055002CR)

Lost the lens cover for my Bosch thermal camera so I decided to recreate it based on photos and share it here in case anybody else needs it. It fits perfectly and follows the original design as closely as it can. There is, however, an…

Print approx. €0.31–€0.38 excl. taxPreliminary estimate for one variant

Downloads
10
Likes
1
Rating
0
P
PrintablesGary

Under cabinet mounting bracket and cable caddy for a Wanptek GPS3050 power supply

The Onshape files can be found here: https://cad.onshape.com/documents/df0b3f0a4026fec2714bccaa/w/c6e1445203c64036d594bf2b/e/e127d6d1c369c972726e20af?renderMode=0&uiState=6988c5b4e200f073ca41870f Feel free to use or modify as you see fit.…

Print approx. €22.38–€27.35 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
10
Likes
3
Rating
0
P
PrintablesPavel Souček

GHS05 Korozivní látky a žíravé látky MMU3

Určeno pro MMU3 a zrnitou podložku, rozměr 200x200x3mm. Prusa MK4, MK4S s MMU. Ideálně PETG. Barva základní bílá, červená, černá.

Print approx. €3.95–€4.83 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
8
Likes
2
Rating
0
P
PrintablesOxyfraggle71

Bracket for foam injector (compatible with pressure washer Kränzle K1050 TST)

For optimal storage of the foam injector on the high-pressure cleaner, this mount was developed. The foam injector is inserted horizontally into the mount and locked in a vertical position by rotating it 90°. This ensures that the foam…

Print approx. €4.68–€5.72 excl. taxPreliminary estimate for one variant

Downloads
8
Likes
1
Rating
0
P
Printablesda_owa

Netgear GS305 Switch Mount for Hager volta Mounting Plate

Bracket to mount a Netgear GS305 (5-port gigabit, metal housing) in a Hager volta multimedia enclosure on a mounting plate. Ports face up, the switch stays open on all sides for cooling. How it works The switch hangs on two printed hooks…

Print approx. €0.74–€0.90 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
5
Likes
2
Rating
5
P
PrintablesFritzPeppone

Solar System Lithophane Planet Lamp Collection - ⌀205mm

Introduction This model is part of my Solar System Lithophane Lamp Series. As of now, all planets and several moons of the solar system are available as lithophane lamps in five different sizes: ⌀295mm , ⌀205mm (this upload), ⌀150mm ,…

Downloads
18,616
Likes
8,044
Rating
4.95
P
PrintablesWhity

Gear Fidget Toy 05 - The Flat Hexagon With a Spin

I ran out of fidget toys i really enjoy. An obviously highly critical situation! That's why i started to design my own ones, which resulted in a series of five similar but still quite different fidget toys using helical gears. The series:…

Downloads
7,953
Likes
1,915
Rating
4.78
P
PrintablesNivenante

Bambu Lab - MAGNETIC Purge/Flush/Poop bucket for X1 and P1 Series - Fullsize and Slim Version | UPDATE 2023.05.13

My Bambu X1C vibrates quite a lot which means sometimes the bucket is being pushed away. When that happens I find filament everywhere on the table. That's the reason why I made this Remix. If you already printed a bucket without cutouts…

Downloads
7,233
Likes
722
Rating
4.91
P
PrintablesBasementLAB

Supported Corner Bracket HEAVY-DUTY - 2020 / 3030 / 4040 / 5050 V/T-Slot Profile REV.1

Supported Corner Bracket HEAVY-DUTY - 2020 / 3030 / 4040 / 5050 V/T-Slot Profile REV.1 Engineered for easy printing and minimal material waste, this 90° bracket offers sturdy, rigid performance Suitable for: 2020 -3030 -4040 -5050 V-Slot…

Downloads
6,411
Likes
1,967
Rating
4.85
P
PrintablesFusedForms

Cable Tie / Tie Organiser Reusable Tidy PETG/TPU 40-205mm Sizes

01 - Summary A simple reusable tie fastener to organise cables and other long objects. It features 1-12 holes with lengths 40-205mm for great versatility. Unlike other cable ties, this puts ease of use first, with a simple fastening and…

Downloads
5,736
Likes
1,949
Rating
4.84
P
PrintablesTonyG

RAK19007/RAK5005 case for Meshtastic

**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D: ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken: ( https://www.3dchicken.co.uk ) These…

Downloads
5,568
Likes
454
Rating
4.95
P
PrintablesRed Haniwa

LM2596 and XL4005 buck converter - slimmer

2026/03 update: Resize holes so screws can fit and grip better. Added new models for XL4005 and other variants. It's 1mm longer and have different board screw position. ===== 2024/12 update: Added a new v2024.12 with these changes: Even…

Downloads
3,125
Likes
378
Rating
4.87
P
PrintablesPV LM

hydroponic tower for growing plants (WIP) (Updated 25.05.2024)

hello friends, I'm Vlad-3d designer from Ukraine , I got this idea and I really want to implement it, first of all, this product is aimed at premium materials and I want to implement it as a final product, but I will also share the final…

Downloads
2,971
Likes
2,367
Rating
4.5
P
Printablesekoscape

Plant Support Stake – 4 Sizes (80mm to 205mm)

These strong, reusable plant stakes are designed to help support stems and keep plants upright as they grow. Whether you're dealing with seedlings or mature plants starting to lean under their own weight, these supports offer a clean,…

Downloads
2,436
Likes
689
Rating
4.88
P
PrintablesTonyG

RAK19007-mini/RAK5005-mini case for Meshtastic

**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D: ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken: ( https://www.3dchicken.co.uk ) These…

Downloads
2,336
Likes
272
Rating
4.92
P
PrintablesTomHoyleDesign

G305 to S2 Shell swap

Requires:Original G305 PCB, Scroll, Side Buttons and Screws. Requires 4* 5mm Diameter 3mm Depth magnets. Requires 4* 5mm Diameter 3mm Depth magnets. (may need glue) rotate top -55 degrees, rotate Rear 90 degrees. If you enjoy this mouse…

Downloads
2,119
Likes
253
Rating
4.11
P
PrintablesEichiii

Superlighter - Logitech G305 Mod (~38g)

FINALLY FINISHED I've tested the final version of this mouse for a couple months now and I'm convinced it is pretty much as good as it will get. Enjoy! Background Story This Model was initially made for school and then continued in my…

Downloads
2,108
Likes
420
Rating
5
P

Display Stand for LEGO Star Wars Microfighters and Polybags [last update 27.05.2025] / 75400 75391 75344

Before you go further! This model is available for free for all my supporters in Printables Club 🧡 Consider joining my club to have access to all ⭐⭐⭐ exclusive projects ⭐⭐⭐ and be part of my community! This project is for personal use…

Downloads
2,073
Likes
387
Rating
4.86

Lithium Battery Charger Li-ion Module TP4056 USB C mock up

This is a mockup of the TP4056 USB C Battery Charger Li-ion Module for further case designs sizes and dimensions have been measured carefully If this helped you, please leave a like! That's my reward and payment! 👍 I ll be happy to get…

Downloads
1,977
Likes
71
Rating
5
P
PrintablesJori

TP4056 18650 battery charger

I recently got hold of a couple of notebook batteries... ... So I needed a battery charge and test setup. I build a charger holder around my battery booklet thing: https://www.thingiverse.com/thing:4113164 This adds a piece for the TP4056…

Downloads
1,839
Likes
218
Rating
4.76
P

IKEA BLALIDEN / BLÅLIDEN Shelf Bracket Adapter for Glass Cabinet Repair Part 10087158 / 10082805

You don't have a 3D printer but you need it? Buy on Etsy with Worldwide shipping → buy here __________________________________________________________________________________ IKEA spare part number 10087158 / 10082805 Fits only IKEA…

Downloads
1,716
Likes
64
Rating
4.67
P
PrintablesZoroSeerus

Wireless Razer Viper Mini G305 Mod Baseplate No Soldering

Full instruction writeup on instructables: https://www.instructables.com/Razer-Viper-Mini-Wireless-Mod-G305/ It will likely ask you if the baseplate file should be separated, it should not be. I can no longer combine the bodies in Fusion…

Downloads
1,577
Likes
62
Rating
5
P
Printablesthall72

Lego Compatible (3705.dat) Technic Axle 4L

This model is compatible with the lego system.

Downloads
1,540
Likes
82
Rating
4.67

Flashforge Adventurer 5M (AD5M) LED Light Bars mod accessories - mounts for 5050 LED (2 strips per mount bar) v1.0

These are printed accessories for adding LED light bars to the Flashforge Adventurer 5 (AD5M) printer. Printing info: Print as oriented No need of supports. The LED “mount” bars were printed on the AD5M. The longer parts have to be…

Downloads
1,456
Likes
242
Rating
5
P
Printablesfrederikf

100+ Ball bearings in standard sizes (608, 6200, 6202, 6204, 6206, 6000 and 6305 etc.) - uses airsoft 6mm bb balls or 4.5mm steel balls

UPDATED: Slightly larger tolerance (0.1mm diameter for the bearing balls). Choose random seams if you printer is not well-calibrated. I recently needed a slimmer ball bearing for a spinner project, so I did my own take on ball bearings to…

Downloads
1,414
Likes
129
Rating
4.83
P
Printablesysengard

Protective Case for TP4056

Protective case designed specifically for the TP4056 charging circuit. Featuring a entry point for USB cable, a dedicated exit for power cables, and a secure pressure fit design. With this circuit things can get quite hot so i designed it…

Downloads
1,413
Likes
125
Rating
4.83
P
PrintablesLoboCNC

0.05mm Resolution Dial Calipers

Accurate measuring tools are essential for successful 3D printing of anything that mates with anything else. While these calipers aren't as accurate as the real McCoy, they are handy when your Mitutoyo's are hiding elsewhere. They have…

Downloads
1,370
Likes
361
Rating
4.7
P
Printablesmahluni

Bumper / Kantenschutz für navimow i Serie - i105e und i108e

Einfacher Kantenschutz für die navimow i Serie. Sie sind straff entworfen, so dass ein Aufstecken genügt. Es ist kein Schrauben oder Kleben erforderlich. Ich habe mit PETG gedruckt / 100% Infill

Downloads
1,356
Likes
65
Rating
4.75

1/6 Scale 3DPrinted E.V.A. Action Figure 05

Assembly Video: https://youtu.be/swuw8Jnv1ro *if you have trouble downloading the file, please check another download link I provided in the YouTube video description note : 11.10.24 update headballslotv2.stl - deeper ball socket STL and…

Downloads
1,321
Likes
374
Rating
5
P
Printablescleanpop

Logitech G305 Mod compilation

LogitechG305 Mod compilation. You will find everything you need to fully modify your G305 and tinker with it to your hearts content… or maybe just create your own mods :D Update 2022.7.6 : Added more mods including an insane 20-30gr mod…

Downloads
1,307
Likes
223
Rating
5
P
Printables6d6178

Arducam B0205 1080P Day & Night Vision USB Camera Case / Enclosure

This is an enclosure for the Arducam 1080P Day & Night Vision USB Camera Module (SKU: B0205) which is a nice camera USB with auto-switching infrared night vision. The back of the enclosure has a mount that works with the Modular Mounting…

Downloads
1,271
Likes
97
Rating
5
P
Printablesrsfuhrer

CF-105 Avro Arrow

The CF-105 Arrow was a supersonic interceptor developed in the 1950s. I love this beautiful plane and I felt a need to model it, despite having no idea how to model such complex shapes. Please read on to learn some history and to learn…

Downloads
1,268
Likes
81
Rating
3.67
P
Printablesliangodesigns

tp4056 usb-c model li-ion charge circuit 3d model

In case you want to design a part that includes a tp4056 charge controller.

Downloads
1,268
Likes
28
Rating
0
P
PrintablesxSteve

vase 505

A pencil/pen vase for decorative purposes to hold pens and pencils, or anything else. It is 112mm tall and 91mm wide. The photo shows the vase printed in vase mode with 3 bottom layers. It can be printed in normal mode with 0 top layers…

Downloads
1,192
Likes
230
Rating
5
P
Printableshumming

90-05 Miata Sun Visor Delete Blank

Take off the useless sunvisor, use this to fill the hole! Uses the factory screws. 1990 - 2005 Miata / MX-5 Print it in PETG, ABS, or ASA. Do not use PLA for this, especially in warm climates. Enjoy! Check out my webstore:…

Downloads
1,190
Likes
68
Rating
5
P
Printablesthall72

Lego Compatible (3005.dat) Brick 1 x 1

This model is compatible with the lego system.

Downloads
1,145
Likes
50
Rating
5
P
PrintablesAvgjo

1:50 scale 1905 Wright Flyer (Glider)

Have the burning desire to conquer the skies? Then you're not alone. The pioneers of aviation risked their lives to learn how to control their barely flying contraptions. You don't have to risk yours to re-imagine their early feats with…

Downloads
1,103
Likes
290
Rating
4.86
P
PrintablesBasementLAB

Gusset bracket - 2020 / 3030 / 4040 / 5050 V/T-Slot Profile

Gusset Bracket - 2020 / 3030 / 4040 / 5050 Profile Suitable for: 2020 -3030 -4040 -5050 V-Slot T-Slot Alu profile 20x20x20mm 30x30x30mm 40x40x40mm 50x50x50mm Resize to adjust dimensions All our designs are free to download and use—because…

Downloads
1,101
Likes
178
Rating
5
P

TP-Link SG1005P | SG105 10-inch Rack Mount

A sturdy 10-inch rack mount adapter for one or two TP-Link SG1005P. Also works with the SG105. To install the switch, simply slide it in. However, if you already added the rubber feet, remove them before installing the switch in this…

Downloads
1,095
Likes
89
Rating
5
P
Printablestheberrymancan

Cupholder for NB Mazda Miata (1998-2005)

As you can see in the pictures, this is a two part design. You will need to print the mounting clip and the actual cupholder. The clip is mounted in the passenger footwell by removing the forward screw on the center console near where the…

Downloads
1,092
Likes
89
Rating
5

10" Rack mount for TP-Link ER605 Router (Omada)

This bracket is made for 10" racks. They have the standard dimensions of 1U (44.5mm) in height and 250mm in width. With these dimensions the mount can be printed on a print bed with the dimensions of 220mm x 220mm. The mount is designed…

Downloads
1,037
Likes
81
Rating
4.67

Libre Computer AML-S905X-CC (Le Potato) base case

Remix of Stamos' case for the Raspberry Pi 3. Made for the Libre Computer AML-S905CX-CC (Le Potato) SBC that has the (mostly) same layout as the Raspberry Pi 3+. This is set up with a hole for the IR receiver as well as indentations for…

Downloads
1,019
Likes
69
Rating
4.89
P
PrintablesMrHanjak

Doctor Who - Sonic Screwdriver 9-10th Doctor (The Ninth/The Tenth Doctor's) 2005 (NO SUPPORTS)

🔵 Sonic Screwdriver of 9-10th Doctor 🔵 This screwdriver had the 9-10th Doctor and briefly in Season 5 the 11th Doctor. For a long time I wanted to create a sonic screwdriver of 9-10th doctor but I didn't have a time, today I finally had a…

Downloads
1,005
Likes
280
Rating
4.8
P
PrintablesYXC

N in 1 18650 TP4056 Charger

A holder for the TP4056 lithium Battery charging board (25*19mm). UPDATE:2018/10/01 V2 Fits most of TP4056 boards. Fits most of 18650 batteries with protection circuit. Print Settings Rafts: No Supports: No Resolution: 0.2mm Infill:…

Downloads
978
Likes
151
Rating
4.78
P
PrintablesAndersNygaard

USB-C portable adjustable PSU DSP5005

Update! Due to popular demand i have released the step files for easier modification. Parts: Psu module: https://s.click.aliexpress.com/e/_oDMk7jQ USB-C pd board: https://s.click.aliexpress.com/e/_oDtVUnE Banana plugs:…

Downloads
970
Likes
1,054
Rating
4.67
P
PrintablesJerryie

Ford Fiesta 2005 kit card

Use the pliers to separate the parts and then assemble the car. The model is on a scale of 1:64. To scale a model from 1:64 to 1:43, you need to use a scaling factor of 148.8% in the slicer Printing this model with multicolor produces a…

Downloads
945
Likes
202
Rating
5
P
PrintablesFritoBandito

205mm Grit Guard

A grit guard sits in the bottom of your wash bucket in your wash solution. It allows the dirt and debris that gets stuck to your wash sponge/mitt/towel to fall through the grate and rest in the bottom of your bucket preventing…

Downloads
924
Likes
82
Rating
4.8
P
PrintablesMoe3D

Oni Mask Design No.05

Forgot to add holes to the model, you can add them in lychee slicer using the hole tool. Edit: Uploaded a updated Model with holes for a strap aswell as reducing the length in the back for better fit and comfort.

Downloads
903
Likes
143
Rating
5
P
PrintablesBuildX

#0053 Mini Paint Palette

*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** I was looking for something to help nurture my 10-year old budding artist…

Downloads
862
Likes
129
Rating
5
P
Printablestato_713

Samsung Galaxy A20 & A30 & A30s a205 a305 a307 case

Originally published here: Samsung Galaxy A20 & A30 & A30s a205 a305 a307 case by tato_713 - Thingiverse This case is for the Samsung A20 phone (models started with a205), for the A20s (a207 models) look here . This case was tested on the…

Downloads
850
Likes
20
Rating
5
P
PrintablesITG Gear

3D Enclouser Case for Lenovo M90q gen1 ft. MSI RTX 3050 LP, 3.5in LCD Screen

Sharing my custom 3D enclosure design for the Lenovo M90q Gen 1, featuring the MSI RTX 3050 LP, a 3.5-inch LCD screen, and an RGB fan. This project involved designing the 3D case model using SketchUp and printing it with PETG filament on…

Downloads
845
Likes
48
Rating
0
P
PrintablesViking3DK

Flsun V400 Orca Slicer Profile (0.12-0.16-0.2) new V.3.3 with PETG - 05/02/2025

HOW TO INSTALL PROFILES The file includes a 0.12, a 0.16 and a 0.2 layer hight profile. It have been working great for me and have just made some new tweeks and uploaded the newest version (v2.1) New V.3.3 with PETG, PLA+ and SILK -…

Downloads
840
Likes
27
Rating
0
P
PrintablesAdrianM.

Anycubic Kobra / Kobra 2 / Kobra 2 Pro - Toolbox 05

Anycubic Kobra / Kobra 2 / Kobra 2 Pro - Toolbox 04 Toolbox with two drawer and top Software: PrusaSlicer 2.7.1 Printer: Anycubic Kobra 2 Pro Infill : 15% Brim : yes Skirt : No Support : yes First layer height : 0.24 mm Layer height: 0.2…

Downloads
837
Likes
123
Rating
5

(UPDATED: 05/10/23 NEW DUAL EXTRUDERS GCODE!!!) HOW TO: Using PrusaSlicer with Raise3D Pro3 Model Printer

07/17/2023: 0.6mm Nozzle First Layer Tips! Read below on how to get rid of those gaps/crevices in your first layer when using 0.6mm nozzles. The following was performed on the 0.2mm Layer Height Profile. Manually increase your z-probe…

Downloads
829
Likes
32
Rating
0
P
Printablesrapolasp

Pottery rib tool #053

I want to make expensive art tools accessible to everyone! Currently working on a collection of pottery ribs. Feel free to suggest another set of tools to make! 3D modelling: https://www.tinkercad.com/ Font:…

Downloads
824
Likes
118
Rating
5
P
Printablesmelvinfec

TP-Link ER605 OC200 19 inch rack mount

With this design you can mount your TP-link ER605 and OC200 the proper way. You wil also need the Ubiquiti Networks ER-RMKIT. I used M3 10mm screws to screw the printed parts together.

Downloads
818
Likes
62
Rating
0
P
PrintablesBuildX

#205 Prusa Core One+ / One L - Corner Cap (Community Tested)

*** Thanks for checking out this model! *** If you appreciate what I'm doing, buying me a coffee would be a wonderful show of support! Good quality designs take time, skill, and CAFFEINE! ;-) And then check out my other models for…

Downloads
804
Likes
207
Rating
4.96
P
PrintablesPlumyᵀᴹ

SCP: 05 KEYCARD

SCP:SL 05 Keycard The QR code should work and it will detect you to the scp wiki Filament: PLA (black and white) Supports: No Infill: 100% You will need to add a color change on the on the ninth layer or the layer that the graphics appear.

Downloads
793
Likes
88
Rating
5
P
Printablestato_713

Motorola Moto G52 G72 G82 & Edge (2022) xt2205 case

Originally published here: Motorola Moto G72 G82 & Edge (2022) xt2205 case by tato_713 - Thingiverse Some of the models are designed for rigid materials and others for flexible ones. The models materials are not interchangeable , so pay…

Downloads
790
Likes
34
Rating
4