175mm Ständer für Töpfe - Sauberer Boden - Prusa Mini geeignet
Ein Untersetzer für Blumentöpfe im Garten. Kein Schmutz und Ungeziefer mehr unter den Töpfen, alles bleibt sauber. Die Luft kann frei zirkulieren.
- Downloads
- 33
- Likes
- 6
- Rating
- 5
Counting matching models…
Ein Untersetzer für Blumentöpfe im Garten. Kein Schmutz und Ungeziefer mehr unter den Töpfen, alles bleibt sauber. Die Luft kann frei zirkulieren.
Hello, Today I have for you a Handle 175 mm long, with a hole spacing of 155 mm Suitable for drawers or cabinets. Suitable for M8 screws and smaller. Possibility of using a screw. I used ASA/PETG as the material. No need to use…
Československý motocykl vyráběný v letech 1935-1946. Motorka měla tradiční černé barvy, verze Special se lišila chromovanými detaily a ráfky. Pozdější verze měly nožní řazení, z počátku výroby se dodávalo řazení ruční vedle nádrže.…
Error 17536 relates to an issue with the Dwarf Board connector and the original design of the cable strain relief. The strain on the connector can cause the extruder motor to stop spinning and until a recent beta firmware (6.2-RC1) the…
Had to make max use of my Bambu X1C
this model is pretty tricky to print and may not come out with with the best quality mostly for the raga head and wheel please use tree supports! PLEASE NOTICE: this model takes heavy inspiration from (the model seen in the model origin…
Customized version of https://www.thingiverse.com/thing:4314755 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=4314755 Instructions Using the following options: label_list =…
1:100 Desk Model of the Embraer E175. The .3MF file contains all parts. The .STL has the individual components. You will need 9 pins and glue to assemble the model. Make sure to print the mirror of the following parts if printing from…
175mm x 75mm tray for the honeycomb storage wall with full size hex attachments.
A vertical wallmount for the LEGO Rescue helicopter Set 42145 I printed mine in ASA 0.2 Layerheight 3 perimeters 0.4 nozzle 20% infill grid. Prusament ASA Orange. Also printed a test in PETG, which most likely would've been enough Wall…
Use ASA,ABS, PA6 , print with support easy installation with direct taping screws 2.5mm diameter and 3.5mm screws or epoxy glue
A Anderson plug holder for SB175 (175A Grey Version) Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.2 Infill: 20% Filament: 3DPrintz PETG Black Category: Automotive
UPDATE: 2026-07-29: Added Bridge Support Upper V2 UPDATE: 2026-07-25 Added Bridge 175 V6 and bridge support lower and upper for 2X T114 and 3065 . UPDATE: 2026-05-18 Added Tall Antenna support for long antennas +80cms with 23mm radius…
This model is compatible with the lego system.
Einlegeplatte für die beliebte Makita Oberfräse RT0700 und deren Nachbau Katsu 101750. Die Montage des Kantenfräsmoduls in die Einlegeplatte erfolgt komplett ohne Werkzeug von oben. Anschließend wird die Oberfräse von unten eingeschoben…
This model is compatible with the lego system.
Update 30.01.2026: Improved V2 released for better fit and less filament consumption. Summary This is the one-size-fits-all repeater stand for all the full-size wall plugged AVM Fritz!Repeater and FRITZ!Smart Gateway. All you need is a…
Just a simple case with a snap-in lid. I also added the blend-file if you want to modify it for your use case.
Eine Nachbbildung des Windrades Nordex N175/6.x und der Windturbine Vestas V172 - 7.2 in ungefähren Maßstab 1:500. Es handelt sich um eine stark vereinfachte Abbildung. Die Nabe der Windkraftanlage ist ca. 25cm hoch. Die Bauteile können…
I made a replacement part for the central locking of a w201 trunk. Orginal part number (A2017500092) I printed it using my X1 CC with PA6-CF (100% infill) laying flat on the long part. works perfect so far. you may have to scale it…
Needed to reset the combination on a master 178 after decoding it and I didn't have the tool. I took measurements of the keyhole and did some guessing based on photos I found online and made this small key that works just like the…
I Modified the project to be able to store a LD2410C instead of the temp sensor. Also i opened part of the top case for the light sensor, as the measurements were pretty low. There is plenity of space for the cables, so you should be able…
I work with this airplane quite a lot, so decided to make a Wall art of it. Hope you like it! Adjust height to your needs and print. I suggest printing the side you would want displayed down for a flatter finish.
This is my first attemp for a sensor case, which reads temperature, humidity and lux. It uses a d1mini flashed with Tasmota and a DHT22 and BH1750 (GY-302) as sensors. The data is published via MQTT to my HomeAssistant instance. This is a…
We had some very strong rain and I need my Meepo hurricane to commute to work (sold my car). I know that the hurricane is water/ splash proof but unfortunately I am not :0 A wet road will get you completely covered in muddy water, so I…
1750 840 Freight Bogie - Dragon Railway Freight Bogie 1750 840 1/64 Scale Assembly Manual: Google Docs Check out the Dragon Railway ecosystem! Join our comunity : Discord If you are happy, Buymeacoffee!! Print settings: Cura 3MF file
Protective cap for anderson sb175 (stile) connectors; thight tolerances,so it may take a few prints to get right. The flat version does not lock positively unlike the normal version, but is therefore easier to remove from the plug and has…
This model is compatible with the lego system.
This model is compatible with the lego system.
Created to fit Fluke TP175 test leads, 11mm diameter
Spray paint stencils for your 7.62x51 / .308 ammo containers! - 150gr - 175gr Enjoy, more stencils to come!
1750 840 Freight Bogie - Dragon Railway Freight Bogie 1750 840 1/32 Scale Assembly Manual: Google docs Check out the Dragon Railway ecosystem! Join our Discord If you are happy, Buymeacoffee!!
I searched for the Nine Men's Morris board game to print, but couldn't find one. So I created myself one with Fusion360. Board size is 175x175mm, it can be printed on the Prusa Mini. There are two versions available (both use the same…
A Remixed Cover Lens for a Raspberry P1 Camera V2 board with an ArduCam 8MP IMX219 Sensor module (for RPi and Jetson Nano) with a 175deg Wide Angle M12 Lens. I included the Step file for your remix convenience.
MOD. ALFA ROMEO 1750 Gran Sport del 1930 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante 3D: Anycubic Kobra S1 Combo Laser: Mecpow X3Pro 10W
A versatile IKEA SKÅDIS mount for Fluke 170 series multimeters, featuring a modular design for both multimeter and test leads storage. For mounting hooks use Skadis_Universal_Hook.stl from here: https://www.thingiverse.com/thing:2853257…
Inspiriert durch https://www.thingiverse.com/thing:4676653 , habe den Halter neu konstruiert. Arretiert wird er durch den Euro-Stecker. Beispiel: https://www.amazon.de/gp/product/B0013NAPKI/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1…
Surprisingly, I couldn't find a case that would work for me so I had to design one. My board is AZ Delivery but it probably should fit others if not you can play with parameters in Fusion 360. The sensor can be screwed with m3 bolt.
An upscaled mini 13 + extra accessories!
Original project: https://www.printables.com/es/model/189821-d1mini-sensor-case-dht22-bh1750 I Modified the project to be able to store a LD2410C instead of the temp sensor. Also i opened part of the top case for the light sensor, as the…
This model is compatible with the lego system.
New Version: I was unhappy with many available models for oversized 7 segment displays. They mainly lacked the slant or looked overly simplified compared to commonly found LED and LCD displays. Furthermore I wanted to experiment with…
For the fans of Silo TV Series. No mechanism Just a box with a duck cap. No support needed. Happy printings:) Category: Scans & Replicas
lego 2877 71752 98283 15533 30136 30137 20310 2412
I made this simple cylinder guide to use in the Makera bit collar installer. Mine did not come with spacers/sleeves for a 3.175mm (1/8") milling bit, so when I would put one of the collars on with the tool it would sometimes be a bit…
This model is based on another model from Thingiverse, but doesn't seem to be available anymore. This one tries to fix all issues with that other model and make it work better for FDM printing. I don't claim any rights to this model.…
Print with whatever you want. A simple tool that is easy to print.
This model is compatible with the lego system.
The include .3mf file fits an Adafruit BH1750 (light sensor board) snugly and has holes for the pin wires. This design doesn't have the STEMMA QT/Qwiic connection accessible, as my current project cannot use it, but allows for soldering…
LEGO Delahaye 175 S 1949
A small wall mount for the Fluke 175 multimeter. You'll need a 4mm screw (countersink) for mounting. Print Settings Printer Brand: Ultimaker Printer: Ultimaker 2 Rafts: No Supports: No Resolution: 0.3 Infill: 10-60% Category: Tool Holders…
for a better airflow I made a completely open front. in addition, dust protection and good glue are recommended. it should be printed with support. i made it out of PETG. the struts with the pins are required. I broke out the PETG pins…
This fuse holder is designed around https://www.amazon.com/dp/B0BD15SKDP/ref=twister_B0BD155YWW?_encoding=UTF8&psc=1 BioFuse (3 PACK) Standard ATO 12-AWG In-Line Panel Mount Waterproof Fuse Holder for Automotive and Marine use. Blade…
Printable 3D model. Togepi Container. Pokémon inspiration. STL files.
my paper delivery tray of my HP LaserJet 100 color MFP M175nw broke, here is my new one
This picture frame will hold a 140/175mm picture. you can find the original on Printables here: https://www.printables.com/model/174115-picture-frame or on Thingiverse here: https://www.thingiverse.com/thing:4040732. I have also posted…
Printed with 15% infill and standard 0.2mm settings. No need for support. Print vertically as shown in the model diagram. You need to push the print in to the back vent of the treadmill and it will hold on to it securely.
I bought my E46 without this tube and was reluctant to pay $47.79 for it on FCP Euro. Ended up costing a lot more than $47.79 in time to model and it still isn't perfect. That said, it does fit and is much better than nothing (see…
Part of an urban landscape based on nothing in particular. Something I whipped out in a couple of evenings, always loved drawing maps as a kid so decided to make a 3D one. Scaled at 175*175 to fit perfectly on Prusa Mini, no supports…
This is a drill press fence I whipped up for my Ryobi benchtop drill press. The bolt-down slots are adjustable from 90-175mm apart, so this should fit many other drill presses and give flexibility for adjusting the fence to different…
Gear wheel with 49 teeth, module 3, wheel thickness 10 mm
Damit kann man die beiden Türen des Kühlschrank immer einen Spalt offen halten ohne die fummeligen Plastikteile einzufädeln. Passt zumindest am Thetford N4175, sollte an anderen Kühlschränken mit separaten Türen für Kühlschrank und…
pieza de sujeción del guarnecido del maletero
lego 30134 40243 4175 3633 3185 3224 30056 19121 41823 33303 32932
Vorsicht: Spielende Zahlen ist eine Sammlung von Lernmaterial für Unterricht und Selbststudium. Nach und nach wir zu den meisten Drucken auch noch ein fOrscherblAtt beigefügt, das den individuellen Lernweg begleiten soll.
This is quick and simple model I whipped up to test and see if TPU would survive with fuel. This part is equivalent to Honda Part number 17631-329-003 and works with multiple vintage Honda fuel tanks. May fit others! The dimensions are…
Remixed Elegant Arch MacBook Pro Stand by dmpmassive. Still using it for a MacBook, but resized the foot print to 175 x 120 x 70mm to fit my glass bed nicely. The gap in the center is 24mm wide so it should fit other model computers as…
Gear wheel with 52 teeth, module 3, wheel thickness 10 mm
Presentation Gridfinity storage for your 1/8" bits (3.175 mm), it's purposly designed for bits that have Makera collar on it. You will be able store your bits upside down for more protection, it's very usefull for <1mm drill bits.…
Two variations of a BLTouch mount. The front mount allows for reaching most of the bed with the probe, but puts the sensor further out on the Y axis, so if you have any X axis twist, you'll need to enable X axis twist compensation in your…
Mount for an Anderson SB175 plug. Create infill at 100% in the region of the wire entrance if you think you need to drill out for larger wire opening Print Settings Printer Brand: Prusa Printer: I3 MK3S **Supports:** Yes Resolution: 0.2…
Needs to be printed with supports Printed mine with ABS since the dishwasher can reach 70°, PETG would work as well but PLA is not recommended since it can deform at low temperatures
Adaptation des brosses laiton de @Alvomane , sur le model de @Surfalex2000
Natural Gas or Propane carb adaptor. Fits between the air cleaner and the carb. Set up to use a 7/16 hose to connect to pressure regulator. Gasoline operation is not affected. Will need longer screws to attach airbox and adaptor as the…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********** I bet you are familiar with driving around sun up or…
tisknout s podpěrami a při určité vrstvě vyměnit filament (pokud to chcete dvoubarevně) / print with supports and replace the filament at a certain layer (if you want two-colour)
Gridfinity holder for 1/8" and 3.175mm endmills. Gridfinity endmill bin 1x2: 20PCs Gridfinity endmill bin 1x1: 11PCs Max endmill lenght: 38mm
This is a template for use with a router to make a wooden tray with 3 dividers. Template size is 300mm x 175mm x 6mm thick. Walls are 15mm thick and the dividers are 80mm wide and 145mm in length.
This model is compatible with the lego system.
V2 Update: No seam This is my M175 style fan shroud for Lulzbot SE Tool Head, which is found on the Lulzbot Mini 2 and other Lulzbot printers. The M175 tool head has a fan duct that allows a clear view of a print as it happens, so I…
This could be altered to accommodate many different applications. I am currently working on a version to use on the drawers and shower door in my Transcend Camper. I have uploaded a 10mm version that is quite a bit lighter and does the…
A relatively simple design for a desktop mount for the Testo 175H1 datalogger. I didn’t want to mount it on a wall, so this version allows you to easily transport the datalogger while providing convenient access to the USB port for data…
Często potrzebuję użyć 1 lub 2 krople farby, a lubię korzystać z metalowych miseczek od Mr. Hobby i to rozwiązanie jest bardzo pomocne. Farba nie rozpływa się po całej powierzchni miseczki przez co nie wysycha zbyt szybko. Wymiarami…
I recently got my first desktop CNC and it came with loads of bit but not enough collars so I measured and printed my own. It's not complicated in design and work great with the Carvera provided collar installation tool. Print them from…
Customized version of http://www.thingiverse.com/thing:215386 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=215386 Instructions Using the following options: build_plate_manual_y = 119…
designed for a 175mm by 53 mm lifepo4 cell Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Resolution: 200 Infill: 38 Filament: generic PETG transparent orange Category: Electronics
Originally posted on Thingiverse here: https://www.thingiverse.com/thing:3412650 Some of the models are designed for rigid materials and others for flexible ones. The models materials are not interchangeable, so pay attention to the file…
EBM K1G175-CF33-06 Fan Adapter 150mm Aluminum Tube
lego 69729 10202 1751 90498 11203 35459 3395 83496
A case for an ambient light sensor using a Seeed XIAO RP2040 microcontroller and a generic BH1750 light sensor. The case has a sleek cubic design and is modular. The microcontroller mount for the XIAO is easy to replace and remodel, in…
Printed screw and nut for the grip insert in caliburn style grips. Glue is recommended. Not recommended for structural use. Use a brim and low layer heights. Drilling may be required. I used a 5/16 drill bit. Category: Mechanical Toys
For cheap collet sets from 1 to 7mm Added option with bigger font size Original model heavily remixed from https://www.thingiverse.com/thing:2774910
There are two sizes of circular brush holder available for download. It is of course possible to adjust the height in any way, the default heights are 120mm and 175mm for the large circular holder (diameter 175mm) or 80mm and 120mm for…
I printed this in ASA 25% infill, 4 wall lines. Tolerances are really large so no need for precision nozzle. 0.6 or 0.8 should be fine. The bolts in the center are ¼", I used ¼-20 2" long cap screw bolt with a nylon lock nut and it…
This mounting bracket is designed for slim 175W USB-C PD GaN chargers and is perfect for organizing multiple chargers on a modular camera charger station . It easily mounts to the wall using 3M VHB tape. To reduce wire clutter and save…
The picture of the two pink parts shows the difference between the original and this one. There may be different looking connectors out there but all of the SB175 series connectors should be the same regardless of colour.
I build a gridfinity bin for my vc175 se to hold it within my electronics Ikea 22l gridfinity box. I wanted that it is stackable because I use different colors for different bins to know what type is used in within the box. I could also…
This model is a size modification of this original mask on Thingiverse (from maker Diisaster ) 184mm outer diameter to fit an inside telescope diameter of 175mm. Fits a Sky-Watcher SkyMax 150
3D printable replacement fork dust seal for a Yamaha ty175 with 30mm diameter forks. OEM dust seals are still available, so there's no compelling reason to print them. I am testing a set to see how they hold up in use. The test parts were…
This is a small pad I designed to use with the VEVOR sim steering wheel stand. The pad is roughly 175mmx175mm and I use it as a small mouse pad, but it is sturdy enough for lots of uses. I had some leftover class 8.8 (M8) allen bolts and…