Search results: 23

Sort order

4,340 models

P
PrintablesPrism08

UNIMOG RC Chassis (model U5023 - 2014) at 1/10 scale (RC CAR / RC TRUCK)

18/12/2024: Well if you are into Mercedes trucks chances are you are not looking for a french car (!) But anyways you could give a look at my new model the Peugeot 3008 RC chassis and body . 17/02/2024 : I'm releasing a new shock absorber…

Print approx. €1.35–€1.65 excl. taxPreliminary estimate for one variant

Downloads
3,706
Likes
809
Rating
4.4
P
Printablesdhiltonp

Gridfinity Battery Box: CR2032/CR2016, 357/303/SR44 and A23/MN21/AAA slots

This is for Zach Freedman's Gridfinity. It can hold 22 CR2032 or 44 CR2016 batteries, 12 357/303/SR44 batteries, and 2 A23 batteries (commonly used in garage door openers). The A23 slots can hold AAA batteries, but the holder will no…

Print approx. €2.25–€2.75 excl. taxPreliminary estimate for one variant

Downloads
2,868
Likes
552
Rating
4.9
P
PrintablesPrism08

Mercedes UNIMOG U5023 Cabin / Body (RC CAR / RC TRUCK) 1/10 scale

November 3, 2026 Added a main cabin without hatch (RED folder) June 18, 2024 Added a main cabin that is open at the back and a step file of the section in order to allow for an easier design of a double cabin. The added part should be…

Print approx. €0.09–€0.11 excl. taxPreliminary estimate for one variant

Downloads
2,726
Likes
416
Rating
5
P
Printablesncsandor

Wifi QR Code with Custom QR Code - Update 2023

Update #1: I updated the models to work better with the new method, and add new stand model. I tried to make the description and the solution in such a way that it could be done easily, without special program, and knowledge. Color…

Print approx. €1.81–€2.22 excl. taxPreliminary estimate for one variant

Downloads
2,161
Likes
511
Rating
4.86
P
PrintablesTheSith

Temperature tower 195-230

EN: I wanted temp tower from lowest temperature to highest, but first temperature from 195. Didnť find, so I remixed one for myself. Use it with PLA filaments. Included Gcode file was generated for Prusa Mini in PrusaSlicer. CZ: Chtěl…

Print approx. €2.21–€2.71 excl. taxPreliminary estimate for one variant

Downloads
1,831
Likes
57
Rating
5
P
PrintablesRaegin

Wrench for Logitech G27, G29, G920, G923 racing wheel

Description Tightening the nuts on your Logitech G27, G29, G920, or G923 steering wheel doesn’t have to feel like an arm-wrestling match with a gorilla. This wrench, based on the original design by magno23 (thanks for the initial work!),…

Print approx. €0.40–€0.49 excl. taxPreliminary estimate for one variant

Downloads
1,652
Likes
239
Rating
5
P
PrintablesArthur Felk

Easter Bunny 2023

Sweet Easter bunny perfect as a decoration for Easter. Printed with a height of 0.16mm and a 0.4mm nozzle. Süßer Osterhase perfekt als Dekoration für Ostern. Gedruckt mit einer Höhe von 0,16 mm und einer 0,4 mm Düse.

Print approx. €7.98–€9.75 excl. taxPreliminary estimate for one variant

Downloads
1,491
Likes
194
Rating
4.96
P
PrintablesMonika Szuba

F1 / Formula 1 drivers keychain grid 2023 + more!

Hi! Let me introduce the whole grid of 2023 Formula 1 World Championship! Now you can show the world who your favourite driver is 🏎 In the files section you will find: stl files with each driver keychain from the list: Red Bull: Max…

Print approx. €0.32–€0.39 excl. taxPreliminary estimate for one variant

Downloads
1,059
Likes
143
Rating
5
P
PrintablesAWSW

WordClock 16x8 LED matrix (2023-V2)

BIG news on 18.07.2026: Software version V5.0.0 available! WordClock 16x8 received its biggest update yet. I fully rewrote the configuration portal and added lots of new features and improvements to the software. To name a few of them…

Print approx. €5.05–€6.17 excl. taxPreliminary estimate for one variant

Downloads
1,055
Likes
286
Rating
4.82
P
PrintablesQ

Safety Door Stopper/Bumper V2 (2023 Design) - 7 sizes & clip for creative design

The Safety doorstop prevents the door from slamming abruptly by gently cushioning it. This can, for example, prevent small children's fingers from being crushed when the door closes due to a gust of wind. This also prevents glass breakage…

Print approx. €0.40–€0.49 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
930
Likes
283
Rating
4.83
P
Printablesbigshum

CR123 Battery Case

A small case with a push fit lid to fit a pair of CR123 3V batteries. Handy to have around for those cameras that require them - I've found that not all bodies are honest when reporting remaining battery levels and it's useful to have a…

Print approx. €1.18–€1.45 excl. taxPreliminary estimate for one variant

Downloads
684
Likes
47
Rating
5
P
Printablestsukworks

'17-'23 KTM Headlight Frame for Diode Dynamics LED SSC2

Change Log V3 Lower light bolt hole moved forward to allow for greater range of motion for lower light Reinforced the slot in the frame that interfaces with the lower headlight mount of the headlight mask. V2 Overhangs improved for more…

Print approx. €9.61–€11.74 excl. taxPreliminary estimate for one variant

Downloads
592
Likes
84
Rating
5
P
PrintablesPrism08

Mercedes UNIMOG U5023 grill at 1/10 scale (RC CAR / RC TRUCK)

This is the grill for my Unimog RC project ; the chassis is here and you can also browse my other models to find other UNIMOG accessories. Mounting is pretty straightforward; glue the black backgrounds (round one for the Mercedes star)…

Print approx. €0.11–€0.14 excl. taxPreliminary estimate for one variant

Downloads
582
Likes
79
Rating
0
P
PrintablesCraftswoman.cz

23 Big Snowflakes collection / Kolekce velkých sněhových vloček / Schneeflocken

🇬🇧 – English – A collection of 23 snowflakes with hanging loops for decoration purposes, 7-9 centimeters big. The same snowflakes with hanging loops are here . 🇨🇿 – Czech – Sněhová vločka 23x jinak s očky na zavěšení, 7-9 centimetrů…

Print approx. €1.14–€1.39 excl. taxPreliminary estimate for one variant

Downloads
562
Likes
71
Rating
4.5
P
Printablesrorys3D

Party glasses - 2023

A model of funny glasses for celebrating the arrival of the new year 2023. Printing: Print takes a little over 2 hours and I reccomend to use color-change during print (the .3mf and gcode files are color-change ready ). But of course you…

Print approx. €1.62–€1.98 excl. taxPreliminary estimate for one variant

Downloads
520
Likes
49
Rating
4.94
P
Printableskermitthefrog

Lego 2023 McLaren Formula 1 F1 Car Display Stand (MMU/AMS Friendly)

A simple display stand for the Speed Champions Lego McLaren Formula 1 Race Car (#76919). MMU/AMS friendly but they are not required for the single-color version. F1 logo is optional with alternative model files provided! This model…

Print approx. €5.00–€6.11 excl. taxPreliminary estimate for one variant

Downloads
511
Likes
115
Rating
5
P
PrintablesAku N

RC Tank T-34 PS. 231-1 Part 2 wheels and support arms

Please make part number 1 “Traks" first because it is the most challenging assembly. https://www.prusaprinters.org/prints/99893-rc-tank-t-34-ps-231-1-tracks The Support_arm_S will break if you collide. So it's a good idea to print a spare…

Print approx. €0.34–€0.41 excl. taxPreliminary estimate for one variant

Downloads
460
Likes
54
Rating
5
P
Printablesludodg

XB8E 2022 Receiverbox (Update july 23th, '24)

UPDATE!!! (July 2024) I am currently working on a new recceiverbox which will fit the 2024-car. As the layout in the car changed (shorter chassis and some modified parts), this receiver-box does not fit anymore. ************************ I…

Print approx. €2.09–€2.55 excl. taxPreliminary estimate for one variant

Downloads
379
Likes
7
Rating
0
P
Printablesvaldman

TempTower ASA Prusa mini 230-270 i PETG 215-250

Wieża temperatur dla ASA 230-270 i PETG 215-250

Print approx. €1.63–€1.99 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
376
Likes
13
Rating
5
P
PrintablesIceman

Temprature tower PLA 200-230

I couldn't find a temperature tower I liked because I normally use between 210 and 220°C in PLA. I did not find a simple tower that gives me idea of stringing, bridge and surface in the temps I wanted unless starting at very low temp.…

Print approx. €1.50–€1.84 excl. taxPreliminary estimate for one variant

Downloads
375
Likes
11
Rating
5
P
PrintablesMarkTheEngineer

Lenovo Legion 300W and 230W Charger Mount

This is a mounting point for Lenovo Legion 300W and 230W charger. It's designed to be attached to the underside of a table so that the charger isn't laying on the floor. You can also quickly and easily unattach the charger if you need to…

Print approx. €0.87–€1.07 excl. taxPreliminary estimate for one variant

Downloads
346
Likes
33
Rating
5
P
PrintablesAku N

RC Tank T-34 PS. 231-1 Part 5 Body shell

https://youtube.com/playlist?list=PLcrufmroGYFnFEDnIxH_HovsyGvH1X6Ub Please make part number 1 “Traks" first because it is the most challenging assembly. https://www.prusaprinters.org/prints/99893-rc-tank-t-34-ps-231-1-tracks You also…

Print approx. €0.79–€0.97 excl. taxPreliminary estimate for one variant

Downloads
339
Likes
33
Rating
0
P
PrintablesMaVeRa

Silencer 1/2 UNF Tread Ideal for Crosman all 22xx series 2300 and more Air Guns

Carefully set up your printer! Because 1/2 UNF thread will be printed. My settings are: Resolution 0.15 Perimeter 4 Without any supports Included 20mm Brim on the outside only I used Prusament PLA Simply Green . You can easily use other…

Print approx. €6.95–€8.49 excl. taxPreliminary estimate for one variant

Downloads
323
Likes
23
Rating
0
P
PrintablesAWSW

WordClock 16x8 LED matrix (2023-V1)

BIG news on 18.07.2026: Software version V5.0.0 available! WordClock 16x8 received its biggest update yet. I fully rewrote the configuration portal and added lots of new features and improvements to the software. To name a few of them…

Print approx. €6.06–€7.41 excl. taxPreliminary estimate for one variant

Downloads
294
Likes
64
Rating
5
P
PrintablesSeagull28

2023 Dumbbell Christmas Ornament

A fun Christmas ornament for 2022. Better late than never. I included an optional 2023 version if you want to make one for next year. Thank you so much for stopping by!

Print approx. €1.93–€2.35 excl. taxPreliminary estimate for one variant

Downloads
293
Likes
85
Rating
4.67
P
PrintablesPatrik

Gridfinity CR123A/CR123 Battery bins

Stackable Gridfinity battery bins. A 1x1x5 bin that fits 9 batteries laying down, this bin is directly stackable. A 1x1x3 bin that fits 8 batteries standing up, in order to be stacked it requires a 1x1x3 spacer A 1x1x3 spacer. NOTE: The…

Print approx. €0.46–€0.56 excl. taxPreliminary estimate for one variant

Downloads
293
Likes
12
Rating
5
P
PrintablesAku N

RC Tank T-34 PS. 231-1 ABS Bearings

Sliding bearing for tank tracs wheels. Material ABS.

Print approx. €0.11–€0.13 excl. taxPreliminary estimate for one variant

Downloads
270
Likes
36
Rating
5
P
PrintablesLush

HDD hotplug cage 6 bay for Supermicro Backplane BPN-SAS-823T

HDD hotswap cage for everyone! Update 11/25: I reprinted mine and redisigned the cage to have higher tolerances for the hdds and support two 92mm fans. Now all hdds stay below 40°C. Added updated v2 as 3mf and f3d. I designed a 6 bay…

Print approx. €35.01–€42.79 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
213
Likes
38
Rating
5
P
PrintablesRealPrint

Interior (Inneneinrichtung) for Märklin 4027 (D-Zug-Wagen, 1. Klasse) (auch 4023?)

Dies ist ein Remix von "Interior for a Märklin H0 coach wagon" von jvdwaa. Die Bänke wurden zusammengeführt und schmaler gemacht. Dadurch bleibt auf einer Seite ein Gang frei und die Bänke sind leicht einzusetzen. This is a remix of…

Print approx. €4.00–€4.88 excl. taxPreliminary estimate for one variant

Downloads
212
Likes
13
Rating
0
P
PrintablesZajcek

BOSH GAL 1230 CV HOLDER

WALLMAOUNT FOR BOSH GAL 1230 CV HOLDER CHARGER

Print approx. €1.51–€1.85 excl. taxPreliminary estimate for one variant

Downloads
206
Likes
8
Rating
5
P
PrintablesC Model

Drilling Tool, Metric Hole, 23 Holes

Details: Sizes: 1, 1.2, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7, 7.5, 8, 8.5, 9, 9.5, 10, 10.5, 11, 11.5mm Buy me a coffee If you like my work, you can buy me a coffee . Appreciated!

Print approx. €0.91–€1.12 excl. taxPreliminary estimate for one variant

Downloads
174
Likes
29
Rating
0
P
PrintablesTeo_211

Mercedes C123 Coupé Wall Art

Very nice and classy Mercedes C123 Coupé Wall Art.size can be customized as wanted Accept suggestions for my next models

Print approx. €1.88–€2.30 excl. taxPreliminary estimate for one variant

Downloads
142
Likes
25
Rating
5
P
Printablesmuhaa2k2

Ballenzange round bale handler replacement Bruder 02332

My toodler broke the orginal one two times… this time I replace the broken side with a 3d printet one. I design the points where it was destroyed a littel bit stronger. have fun

Print approx. €2.37–€2.90 excl. taxPreliminary estimate for one variant

Downloads
120
Likes
18
Rating
0
P
Printablestom_studio

Snowflake - Gingerbread Cutter no. 123

Meet CUTE - C hristmas U nique T emplates E dition ⭐ Designed as 2 in 1 - cut your cookies with details or just an outline. Outer cutter has also beveled edges for easier cutting. Min. dough thickness for inner detail to be visible should…

Print approx. €1.05–€1.28 excl. taxPreliminary estimate for one variant

Downloads
112
Likes
16
Rating
5
P
PrintablesNerrian

CR123 batteries to 18650 adapter

The model should be printed in vase mode. Only 2.4gr / 0.79m of PETG is required to print it.

Print approx. €0.31–€0.38 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
111
Likes
18
Rating
0
P
PrintablesTheloniusChunk

Beseler 23C 6x7 Negative Carrier

A quick and dirty remix of @bnn_229452 's 6x9 negative carrier for a Beseler 23cii Enlarger

Print approx. €3.57–€4.36 excl. taxPreliminary estimate for one variant

Downloads
108
Likes
2
Rating
0
P
PrintablesMike Rapt

PHILIPS SpeedPro (FC6823) parts

Replacement parts for SpeedPro

Print approx. €0.22–€0.27 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
102
Likes
5
Rating
0
P
Printablesfelix42sol

(Switched) Filament guide for Prusa MK4 #build123d

Warning IMPORTANT: Using the switched fillament guide with very high models crashes the extruder! Please be aware of that! I am planning to update the model as soon as possible to remove this issue. Motivation After my original and…

Print approx. €0.81–€0.98 excl. taxPreliminary estimate for one variant

Downloads
102
Likes
12
Rating
5
P
PrintablesEd

Subaru Crosstrek (2017-23) Cupholder Tray with Phone Holder

This model is designed to print and then assemble with almost no supports (organic recommended). PETG is the ideal material for this, and I found that black JB Weld Plastic Bonder epoxy (in the US) works well for gluing the pieces…

Print approx. €10.23–€12.51 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
97
Likes
24
Rating
0
P
PrintablesMrtritop

PHILIPS EP2231 Anti Vibration Feet

Anti Vibration Feet for PHILIPS EP2231 Coffee-machine. Makes it a lot more quiet. Printed with PLA. Supports recommended.

Print approx. €0.42–€0.52 excl. taxPreliminary estimate for one variant

Downloads
92
Likes
9
Rating
5
P
Printablespavel

Portable hinged battery case for CR123A / 16340

Print-in-Place Hinged Box for 4x CR123A Batteries Compact, one-handed operation storage box for 4 CR123A batteries (or CR123 or RCR123A or 16340) with an integrated hinge. Optimized for one handed use. Materials needed: 2 x magnets (size…

Print approx. €1.74–€2.12 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
83
Likes
15
Rating
5
P
Printablestriple_10

Clip for AEG dishwasher (v4 - 250223)

I used ASA filament for printing this clip. Maybe PETG works also fine. PLA is not suitable for this use case.

Print approx. €0.35–€0.43 excl. taxPreliminary estimate for one variant

Downloads
82
Likes
8
Rating
5
P
Printablesxkeo

HP Dock Cover (Thunderbolt 230W G2)

HP Dock Cover For some reason, HP decided to make the entire top of this dock a power button. This cover is made to prevent anything (kids, cats, books, etc.) from accidentally shutting down your laptop. Side-USB file has a cutout for…

Print approx. €4.94–€6.03 excl. taxPreliminary estimate for one variant

Downloads
80
Likes
11
Rating
5
P
PrintablesAsh

Wall mount glove dispenser (23cm x 13cm x 6.5cm)

Model Fits boxes up to 23cm x 13cm x 6.5cm, uses 4x 8G screws to mount. Make sure to leave enough room above to insert and remove the boxes when mounting on a wall. Parts needed 4 x 8G Screws Installation (1) Use a spirit level to ensure…

Print approx. €15.13–€18.49 excl. taxPreliminary estimate for one variant

Downloads
71
Likes
13
Rating
0
P
PrintablesPapyjo

Base de lancements de fusées à eau BBC23

Le lancement de fusées à eau est une activité ludique, mais elle peut être dangereuse sans un minimum de précautions. L'utilisation d'une base sécurisée est donc nécessaire. En voici une réalisable avec notre imprimante 3D La retenue et…

Print approx. €0.42–€0.51 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
70
Likes
8
Rating
0
P
PrintablesPetar Ivanov

100W PD Power Bank USB-C (IP2368, 4S1P)

I decided to make my portable power bank with PD using IP2368. I used 4 batteries 18650 connected in series. The battery balancing board must be attached to the battery holders. No bushings are required! You will need a few screws: 4 x…

Print approx. €0.53–€0.65 excl. taxPreliminary estimate for one variant

Downloads
68
Likes
17
Rating
0

REFRIGERATOR HANDLE. DISTANCE BETWEEN HOLES 238MM РУЧКА ДЛЯ ХОЛОДИЛЬНИКА "БИРЮСА"

РУЧКА ХОЛОДИЛЬНИКА. РАССТОЯНИЕ МЕЖДУ ОТВЕРСТИЯМИ 238ММ

Print approx. €6.52–€7.97 excl. taxPreliminary estimate for one variant

Downloads
64
Likes
13
Rating
0
P
PrintablesPrints&Kinks

@Cherry_Labs "Unique print in place laptop stand - Super portable - Adjustable angles" remix for 16” MacBook Pro (2023) or 14.29mm thick laptops.

Print-in-place laptop stand by @Cherry_Labs. I modified hook height for my 16” Macbook Pro (2023) or laptops up to 14.29mm thick, including the rubber feet. Cherry Labs recommends printing with a 0.4mm nozzle. See his model page for…

Print approx. €4.56–€5.57 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
64
Likes
6
Rating
0
P
PrintablesEvil68

Dremel 723 Speedclic box inserts

I got a Dremel 723 box with lots of attachments. I saw the indjection muldet inserts that were wasting realy much space. After about 3 hours of designing and 4 hours of printing i had my inserts and was able to free up 2 of the 8…

Print approx. €1.09–€1.33 excl. taxPreliminary estimate for one variant

Downloads
60
Likes
22
Rating
0
P
PrintablesTeo_211

Tidewater 232 LXF 2022 Wall Art

Tidewater 232 LXF 2022 Center Console Boat Wall Art Silhouette model. Adjustable size. I accept model suggestions.

Print approx. €1.04–€1.27 excl. taxPreliminary estimate for one variant

Downloads
58
Likes
11
Rating
5
P
PrintablesR.R.

Panzer III ausf L code 235 of the 2nd SS Panzer Division Das Reich

Panzer III ausf L code 235 of the 2nd SS Panzer Division Das Reich In March of 1942, a study was conducted to assess whether the turret of the PzKpfw IV could be fitted onto the superstructure of the Pz Kpfw III. After analysis, it was…

Print approx. €6.66–€8.14 excl. taxPreliminary estimate for one variant

Downloads
58
Likes
3
Rating
5
P
PrintablesKB2QQM

Amateur Radio so-239 Bulkhead Inlet Mount

Bulkhead inlet mount for 2 SO-239 Connectors with the flanges. making this for a friend who was putting his HF radio into one of those black plastic Harbor Freight Tools brand protective carry suitcase.…

Print approx. €1.01–€1.23 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
54
Likes
8
Rating
0
P
PrintablesPolypaul

Makita 195239-9 dust cover adapter for angle grinders

I have to grind old dispersion paint off of a few walls this weekend and after ordering the 195239-9 dust cover I was unable to fit it on our trusty Einhell AS-1400's vacuum hose. So I took some time to design this adapter. The design…

Print approx. €1.05–€1.28 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
54
Likes
10
Rating
5
P
Printablesnclee

Indycar 2023 Track Schedule

Indycar 2023 Track Calendar Completely inspired by heartbreakballer's 2023 F1 calendar, I wanted to make one for Indycar. It contains the dates, track names, and track outlines which are printed in relief. I printed in three colors, with…

Print approx. €12.09–€14.78 excl. taxPreliminary estimate for one variant

Downloads
53
Likes
15
Rating
0
P

Screw Extension for Logitech Driving Force Shifter (G25 G27 G29 G920 G923)

Summary This extended attachment for the thread of the Logitech Driving Force Shifter allows an installation on thin tabletops / desks and enhances the stability. Advantages Allows for mounting on thin tabletops Increases the stability of…

Print approx. €0.45–€0.55 excl. taxPreliminary estimate for one variant

Downloads
51
Likes
6
Rating
0
P
PrintablesRob Latour

Wall mount for Fiskars 23" PowerGear Hedge Shears

This is a custom designed wall mount for the Fiskars 23 Inch PowerGear Hedge Shears. There are many models of Fiskars products so please see the photo to ensure you have the right one for use with this wall mount. Included are the source…

Print approx. €1.36–€1.67 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
49
Likes
6
Rating
0
P
PrintablesJan

Medals for any game | !MULTICOLOURED WITHOUT MMU! | 2023 Edition

Multi-coloured medals without MMU! Universal medals for any game. To print a single color medal, click here . THE FIRST COLOUR THAT STARTS THE PRINT IS THE COLOUR THAT MAKES THE FONT Here are the game medals with colourful text inside.…

Print approx. €0.34–€0.41 excl. taxPreliminary estimate for one variant

Downloads
49
Likes
6
Rating
0
P
PrintablesAlvomane

Samla 22L Compact Drybox Mounting Frame | Montage Rahmen für Frantisek23s Trockenbox.

Update 05/23/2024: Now that Frantisek23 has further perfected his design , I definitely recommend his new solution and basically declare my remix obsolete. Since the EndRib_V1b Mini.stl model is no longer available from him in the course…

Print approx. €1.33–€1.63 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
45
Likes
12
Rating
0
P
PrintablesSuitbert Monz

Schutzkappe für Antennenbuchse SO-239

Der Standfuß für meinen Mobilfunk-Antennenstrahler hat eine Antennenbuchse SO-239. Die Originalkappe musste nun ersetzt werden, um das Eindringen von Wasser in die Buchse zu vermeiden. Diese Konstruktion wurde von meiner Frau Andrea mit…

Print approx. €0.34–€0.41 excl. taxPreliminary estimate for one variant

Downloads
44
Likes
1
Rating
0
P
PrintablesPavel Novák

Krytka vrutu ve dveřích Dacia Jogger (2023)/Screw cover in the door of Dacia Jogger (2023)

Malá krytka v předních dveřích vozu Dacia Jogger (2023), která může být velice snadno ztracena. Tisknout lze bez podpěr, s běžným nastavením bez obtíží./A small cover in the front door of a Dacia Jogger (2023) that can be very easily…

Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant

Downloads
41
Likes
5
Rating
0
P
PrintablesDeluxeBabble

Sliding Cover for Spigen Optik Armor (Samsung Galaxy S23)

Since I didn't want to open the cover every time I wanted to use the flashlight, I constructed a compatible sliding cover. To avoid accumulation of dust, however, I did not want a hole at the location of the flashlight. The flashlight is…

Print approx. €0.24–€0.30 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
40
Likes
13
Rating
0
P
Printablesstefancham

TAMIYA - stack container for 6x 23ml color glasses

TAMIYA - stack container for 6 color glasses (6x 23ml glasses) compatible with: TAMIYA - stack container for 2x 250ml Lacquer Thinner von stefancham | Kostenloses STL-Modell herunterladen | Printables.com

Print approx. €3.82–€4.67 excl. taxPreliminary estimate for one variant

Downloads
36
Likes
10
Rating
5
P
PrintablesAinon3Dtisk

MK23 SOCOM Airsoft Suppressor 150mm M14x1L

Hi there, Here is an airsoft suppressor (150 x 40 mm) with an M14x1 LH (left-hand) thread. It fits any airsoft gun. It features the standard M14x1 left-hand thread found on all types of airsoft barrels. It fits perfectly and holds…

Print approx. €2.83–€3.46 excl. taxPreliminary estimate for one variant

Downloads
32
Likes
5
Rating
0
P
Printablesmartin_pihrt

Medaile robo 2023

medaile pro soutěž

Print approx. €0.80–€0.98 excl. taxPreliminary estimate for one variant

Downloads
32
Likes
4
Rating
0
P
PrintablesFelixTeutsch

Everydays 023 – Christmas Ornament Speculum Spirae

Another day, another Christmas ornament! Today’s design features a recessed double spiral that is mirrored along the center — the spiral flows upward, bends, and returns symmetrically on the opposite side. The geometry creates a calm,…

Print approx. €1.66–€2.03 excl. taxPreliminary estimate for one variant

Downloads
31
Likes
8
Rating
0
P
PrintablesR.R.

Mercedes Benz 230 6 W114

Mercedes Benz 230 6 W114

Print approx. €7.83–€9.57 excl. taxPreliminary estimate for one variant

Downloads
30
Likes
4
Rating
0
P
PrintablesViperrr

Chinese layout remix for WordClock 16x16 LED matrix (2023-V2)

A Chinese layout remix using Lishu (隶书) font for the amazing WordClock 16x16 LED matrix (2023-V2) designed by AWSW. Follow the instructions and print everything from the original model, just replace the front file with this Chinese layout…

Print approx. €7.83–€9.57 excl. taxPreliminary estimate for one variant

Downloads
29
Likes
12
Rating
0
P
PrintablesInfluencercow

Print approx. €0.42–€0.51 excl. taxPreliminary estimate for one variant

Downloads
27
Likes
3
Rating
0
P
PrintablesPachuc

Sony SRS-XB23 Speaker Stand

Sony SRS-XB23 wireless speakers are famous for their high-quality sound, but their big drawback is directionality. When placed on a desk, the sound does not travel in a straight line to the ears. This stand solves this problem . When you…

Print approx. €4.84–€5.91 excl. taxPreliminary estimate for one variant

Downloads
25
Likes
2
Rating
0
P
PrintablesLordTheCAndy

23mm Fuß für Monitor Acer GN246HL

Ein Standfuß für den Monitor Acer GN246HL. Er ist 23mm hoch und hat eine leichte Neigung von ca. 3°. Er ist an den Fuß angepasst und dient zur Erhöhung um auf die Höhe eines anderen Monitors zu sein. Er wurde liegend gedruckt mit weißem…

Print approx. €9.03–€11.04 excl. taxPreliminary estimate for one variant

Downloads
23
Likes
1
Rating
0
P
PrintablesPapyjo

Base de lancement fusées à eau BBC24 (renforcement BBC23)

Le lancement de fusées à eau est une activité ludique, mais elle peut être dangereuse sans un minimum de précautions. L'utilisation d'une base sécurisée est donc nécessaire. En voici réalisable avec notre imprimante 3D La retenue et…

Print approx. €0.48–€0.59 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
22
Likes
2
Rating
0
P
Printablescomartist

Holder for mounting magnets in a BOSCH L-Boxx / Sortimo hanging insert LB 238/374

As a car wrapper, I need my wrap lettering tools on a daily basis. I created the holder for mounting magnets for the hanging insert in a BOSCH L-Boxx / Sortimo LB 238/374. With the magnets, large car films or posters can be aligned, fixed…

Print approx. €5.86–€7.16 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
22
Likes
3
Rating
0
P
Printablesmartin_pihrt

Označovač na kabel 230V

Cedulky na prodlužovací kabely.

Print approx. €1.12–€1.37 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
21
Likes
4
Rating
0
P
PrintablesCarDesignLab

Print approx. €0.83–€1.02 excl. taxPreliminary estimate for one variant

Downloads
20
Likes
2
Rating
0
P
PrintablesDingi

Pf2023

Pf 2023 s nástavcem na el. svíčku

Print approx. €2.90–€3.55 excl. taxPreliminary estimate for one variant

Downloads
17
Likes
0
Rating
0
P
PrintablesVivero

Mounting bracket HP AC adapter PA-1231-66HJ

The status light is still visible through the hole. Printed in PLA 0.2mm layer height 50% infill No supports needed

Print approx. €3.59–€4.38 excl. taxPreliminary estimate for one variant

Downloads
17
Likes
3
Rating
0
P
PrintablesKarol Siwiec

XChallenge 2023 - Task Hunters 3D Models

All 3D models which you can find here will be used at the XChallenge 2023: Task Hunters competition. Artefacts model: This component is made from 2 models: body and top. To combine them, use one M6x200 socket head cap screw. Elements…

Print approx. €2.82–€3.45 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
16
Likes
1
Rating
0
P
PrintablesM.C. 3Design

SUPPORTO TELECOMANDO CANCELLO PORSCHE CAYENNE 2018>2023

SUPPORTO PER TELECOMANDO APRI CANCELLO WHY EVO PER PLACIA PORSCHE CAYENNE 3 SERIE

Print approx. €0.56–€0.68 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
15
Likes
0
Rating
0
P
PrintablesCab23

CONNECT IT Power Strip Holder – 230V Extension Mount

Print Settings: Material: PET-G Layer height: 0.25mm Infill: 20-30% (recommended) Supports: Not required Assembly & Mounting: Parts joined with: M3x24mm screws Wall mounting: Countersunk screws 3.5x20mm Features: Custom-designed for…

Print approx. €3.09–€3.78 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
15
Likes
1
Rating
5
P
PrintablesDingi

Print approx. €2.88–€3.52 excl. taxPreliminary estimate for one variant

Downloads
14
Likes
0
Rating
5

Gulf Shores High School Bridge Heart Challenge BESTRobotics2023

Contact Name: James M. Salvant [email protected] School: Gulf Shores High School BEST Hub: Emerald Coast BEST Robotics - University of West Florida Highlights: This is a single chamber design that can be used as a stand alone system that…

Print approx. €2.28–€2.79 excl. taxPreliminary estimate for one variant

Downloads
14
Likes
2
Rating
0
P
PrintablesGCHS Robotics

Garden City Highschool 3D Printed Bridge to Transplant Heart BESTRobotics2023

Contact Name: Robert Smith, [email protected] School: Garden City High School BEST Hub: Kansas BEST How It Works Our bridge to transplant heart works by two screws (in black) being driven either two or one motor (stand-ins marked…

Print approx. €1.07–€1.30 excl. taxPreliminary estimate for one variant

Downloads
14
Likes
4
Rating
0
P
PrintablesJC

DYSON_wand-base_w_23x2mm_v8

Purchased some Jumbo Vac bags on Amazon. Couldn't find an adapter, well I designed and made one. https://a.co/d/9Y6o5Eo I had to figure out what threads it used. Weird 23mm x 2mm pitch. I designed 23mm x 2mm pitch threads. Then designed…

Print approx. €2.43–€2.97 excl. taxPreliminary estimate for one variant

Downloads
12
Likes
4
Rating
0
P
Printablesscrap_lab

ky-023

thumbstick

Print approx. €0.07–€0.09 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
12
Likes
2
Rating
5
P
Printablesgolem

PF2023 Coin

It is my PF 2023 souvenir which can be used for shopping trolley. It can be printed from any filament with layer 0,2mm. To print it with three colors you should set in PrusaSlicer filament changing at 1,0 mm and 1,6 mm. But it can be…

Print approx. €0.09–€0.11 excl. taxPreliminary estimate for one variant

Downloads
12
Likes
1
Rating
0
P
PrintablesAsger Vestbjerg

Blod pressure funnel/nossle for Sanotec MD 12399

I used PETg, but PLA is OK as well 0,2mm Layer Height Placed on the flat spot to get best straight

Print approx. €0.17–€0.21 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
11
Likes
0
Rating
0
P
PrintablesErikSi

023 Vorsicht: Spielende Zahlen! Mono-Duo-Tri-Cairo

Vorsicht: Spielende Zahlen ist eine Sammlung von Lernmaterial für Unterricht und Selbststudium. Nach und nach wir zu den meisten Drucken auch noch ein fOrscherblAtt beigefügt, das den individuellen Lernweg begleiten soll.

Print approx. €4.36–€5.33 excl. taxPreliminary estimate for one variant

Downloads
11
Likes
1
Rating
0
P
PrintablesSp1y3rS

Print approx. €1.11–€1.36 excl. taxPreliminary estimate for one variant

Downloads
10
Likes
9
Rating
0
P
PrintablesREMLURELMI

Tool-less Replacement Battery Cover - fits VEX 123 Coder

The original battery cover on the VEX 123 Coder uses a screw. This design simply pops into place, no screw required. Recommended print settings: Layer Height: 0.2 mm or less Infill % : 15 Supports: Yes Support Type: Organic/Tree, on build…

Print approx. €0.16–€0.20 excl. taxPreliminary estimate for one variant

Downloads
9
Likes
1
Rating
0
P
PrintablesZdeněk

Flowerpot Insert for 230-g Van Houten Cocoa Tins

Simple design fits snugly into the tin. It has a drain hole in the bottom, with a raised lip to retain moisture towards the very bottom of the pot. As a bonus the original can lid fits it, too, but I admit I have not yet found practical…

Print approx. €6.19–€7.57 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
8
Likes
1
Rating
0
P
Printablesrabo

Blanco Saga Ersatzgriff / Manschette für Armatur ( 120723 )

Ist leichter zu drehen als das Original und durch den besseren Sitz der Schraube langlebiger. Bei uns seit Monaten ohne Probleme im Einsatz. Viel Spaß damit!

Print approx. €3.17–€3.88 excl. taxPreliminary estimate for one variant

Downloads
7
Likes
1
Rating
0
P
PrintablesAvery88

Print approx. €0.61–€0.75 excl. taxPreliminary estimate for one variant

Downloads
6
Likes
1
Rating
0
P
Printablesseekerbot

Holder Sign Parkwarntafel Ducato 230

In Germany vehicles over a certain weight limit need a sign at the front and the back of the vehicle. This set of parts helps you to attache it at the front of your Fiat Ducato 2030 vehicle (in our case a motor home from 2002). I advise…

Print approx. €1.42–€1.74 excl. taxPreliminary estimate for one variant

Downloads
5
Likes
2
Rating
0
P
PrintablesCookieBerlin

Jung AS 500 - AM2301 - Holder

Mount AM2301 in a "Jung AS 500" frame. Hold with two M3 Button Head screw in the frame and one M3 Flat head screw on the print. Print settings: No Supports needed 0,2 mm Layer height 4 perimeter Extra parts: 1x AM2301 / DHT21 Digitaler…

Print approx. €1.05–€1.28 excl. taxPreliminary estimate for one variant

Downloads
5
Likes
0
Rating
0
P
PrintablesDalkain

Gridfinity Battery Trays (AA, AAA, AAAA, 18650, CR123, CR2, 9V, 21700, C, D)

These are storage trays for different common batteries designed for the Gridfinity organization system by ZackFreedman These were all made using the Gridfinity Rebuilt project. I also increased the detail of the models beyond the default…

Downloads
23,009
Likes
3,559
Rating
4.98
P
PrintablesThreeD-Michael

Ultrasonic Dog Whistle 23 kHz

News 2024-03-17: My newest whistle design, a Long Range Dog Whistle at 7,000 Hz . Please download here . WARNING: This is a dog whistle and not a toy! It's very loud which can harm the ears, so please protect your ears and don't use it…

Downloads
14,466
Likes
1,074
Rating
4.24
P
PrintablesMacroglossum

Cute Halloween Bat - Halloween 2023

Introducing 'the Cute Halloween Bat,' an easy-to-print (even without supports) little darling to add some charm to your Halloween. Just take a look at that adorable face and those cute ears. He may be small, but he has a big heart and…

Downloads
13,855
Likes
2,663
Rating
4.9
P
Printablesnzalog

2230/2242/2260 to 2280 m.2 adapter ssd

Please leave a like if you enjoyed the model or it helped you. :) Remixed from : https://www.thingiverse.com/thing:4715615 Started off by making it a bit easier to print by adding a slopes to some of the overhangs. Then ended up taking…

Downloads
7,985
Likes
332
Rating
4.95
P
Printablesduncanamps

Duncan's Battery Box Collection AA AAA PP3 23A (now C and D too)

A set of battery boxes to store AA, AAA, C, D, PP3 (6F22) and 23A batteries. You can print one size at a time and I've included the .3mf and GCODE files for the Prusa i3 MK3/S using PETG which is a great material for these boxes. Also…

Downloads
7,602
Likes
1,048
Rating
4.82
P
PrintablesNivenante

Bambu Lab - MAGNETIC Purge/Flush/Poop bucket for X1 and P1 Series - Fullsize and Slim Version | UPDATE 2023.05.13

My Bambu X1C vibrates quite a lot which means sometimes the bucket is being pushed away. When that happens I find filament everywhere on the table. That's the reason why I made this Remix. If you already printed a bucket without cutouts…

Downloads
7,233
Likes
722
Rating
4.91