Search results: 3l

Sort order

239 models

P
PrintablesDzip1

Lid for metal cans (0,5L & 0,33L) - print in place

Lid for 0.5L and 0.33L beverage cans to prevent insects from entering the can. Material consumption is just 10,5 grams (3,5 meters) of filament. On most cans, the lid snaps shut and doesn’t open on its own—this feature has proven useful…

Downloads
2,574
Likes
579
Rating
5
P
Printablesreisschale

Intex Pool Cup Holder (0,5l/0,33l) - four different versions

Update 25.06.2023: 3 models added I also had tried different cutouts in order to save some filemant. Therefore I had created three different models: The first one has larger cutouts for faster to printing (3 hours instead of 4). It has…

Downloads
828
Likes
71
Rating
5
P
PrintablesOxmstr

VL53L0X

Top lid can be secured by M3 × 6 mm screws. The module itself holds onto the prongs and is pushed down by the lid, can also use soldering iron to spread the plastic around and secure the board. For soldered wires only, no connectors.

Downloads
742
Likes
19
Rating
5
P
PrintablesBamBam Design

Bottle Adapter for Can 0,33l / 0,5l +0,25L (RedBull)

Bottle Adapter for Can 0,33l / 0,5l + Extra File for 0,25l Here it is….. the printable adapter to convert your can into a bottle! Short Snag fit for 0,33l / 0,5l Cans + Extra File for 0,25l Cans E.g. Red Bull Good tightness tested with…

Downloads
713
Likes
209
Rating
5
P
Printablesmaggoh

Time-of-Flight Case ESP32 C3 Super Mini + VL53L1X Time-of-Flight (ToF) ranging sensor for smart home

Hello, here's a small project that I designed. I wanted to combine a small ESP32-C3 Super Mini with an VL53L1X / TOF400C sensor and keep the whole thing as small and modular as possible. Later on, the project will be used with ESPHome and…

Downloads
693
Likes
76
Rating
5
P
Printablescaesar_1111

Beer - Soda Can Helmet - insect protection - fits EU 0,5l and 0,33l can (66mm diameter)

I was able to remix of the beer bottle helmet for FDM printing ( https://www.printables.com/model/236264-beer-bottle-helmet-insect-protection-bierflaschenh ) and I love the design, Now I was faced with the ban of glass bottles on my…

Downloads
596
Likes
83
Rating
5
P
Printablesthall72

Lego Compatible (87994.dat) Bar 3L

This model is compatible with the lego system.

Downloads
584
Likes
38
Rating
5
P
PrintablesLionel SAVOCA

Airbus A330-743L Beluga XL - Scale 1:100

Passionate about aviation and aircraft engineering, I couldn’t imagine not modeling the Airbus Beluga XL (A330-743L) — one of the most iconic cargo planes in the world, instantly recognizable with its unique “smiling” design. The model is…

Downloads
563
Likes
36
Rating
5
P
PrintablesLost Carrier

CamelBak Drying Helper for 3l Bladder

A hook and and a "spreader" to help you dry your 3l CamelBak bladder. This is a remix of theRatchets excellent design for 1.5l bladders - thanks for sharing the .f3d. I made hook and spreader and bit larger so that it fits better for my…

Downloads
465
Likes
36
Rating
4.83
P
PrintablesPhil Lambos

Ford 7.3L TwistLock Oil Funnel

45 degree twist lock oil funnel. Originally designed for 7.3L godzilla in a Super Duty. Probably will work with other ford engines. Printed in PETG. 3 layer wall thickness 30% infill

Downloads
402
Likes
24
Rating
0
P
Printablesmattkollar

32184-Technic Axle and Pin Connector Perpendicular 3L with Center Pin Hole

LEGO Compatible 32184-Technic Axle and Pin Connector Perpendicular 3L with Center Pin Hole

Downloads
401
Likes
15
Rating
4.33
P
Printableslightofhonor

8.3L & 11.3L Mini-ITX SFF PC Case

Video about project: https://youtu.be/iKGNek3DkK4 My second case design, this one focused on required the fewest extra parts as possible. I already had a parts list in mind so this isn't the smallest I could make it, but had a few…

Downloads
343
Likes
118
Rating
0
P
Printablesmattkollar

LEGO Compatible 87082-Technic, Pin 3L with Friction Ridges and Center Pin Hole

LEGO Compatible 87082-Technic, Pin 3L with Friction Ridges and Center Pin Hole

Downloads
338
Likes
15
Rating
0
P
Printablesdrago fire

LEGO PART 87994 Bar 3L

LEGO PART 87994 Bar 3L

Downloads
332
Likes
9
Rating
5
P
PrintablesTom Ruhig

Bag Holding Ring for Ikea HÅLLBAR 3L

I wanted to use it as a countertop compost can but was annoyed by the bag being visible on the outside, and how often the bag would fall in. The larger bins in the system all come with plastic rings to keep the bag inside, and I can't say…

Downloads
326
Likes
30
Rating
5
P
PrintablesGreySiD

VZBot electronics mounts (Orange Pi 3LTS / BTT Octopus PRO / 5160 / PSU Meanwell RD35) on din rail

VZBot electronics mounts on din rail: Orange Pi 3LTS BTT Octopus PRO with 5160 Only BTT Octopus PRO PSU Meanwell RD35 DINrail clip You'll need screws and nuts M3

Downloads
301
Likes
35
Rating
0
P
Printablesthall72

Lego Compatible (26287.dat) Technic Axle Joiner 3L

This model is compatible with the lego system.

Downloads
298
Likes
28
Rating
2.5
P
Printablesthall72

Lego Compatible (62520.dat) Technic Universal Joint 3L End

This model is compatible with the lego system.

Downloads
287
Likes
26
Rating
0
P
PrintablesBiggaSnake

BMW 2-Series, F-Modell Cupholder 0,33l F22//F87 M2

Mein Dosenhalter (0,33l) für BMW F-Modelle. Ich nutze den Cupholder in meinem F87 M2, die Energydrink Dosen wackeln nicht mehr hin und her :) Druckt am besten in PETG aufgrund der Hitze die im Sommer im Auto entstehen kann. 0,25l-Variante…

Downloads
283
Likes
28
Rating
5

VL53l1X 400cm Lidar Module

Address change ;) https://learn.adafruit.com/adafruit-vl53l1x?view=all # SPDX-FileCopyrightText: 2022 wrdaigle for Adafruit Industries # SPDX-FileCopyrightText: 2022 Kattni Rembor for Adafruit Industries # # SPDX-License-Identifier: MIT…

Downloads
269
Likes
4
Rating
0
P
Printablesthall72

Lego Compatible (18947.dat) Technic Transmission Driving Ring 3L

This model is compatible with the lego system.

Downloads
263
Likes
20
Rating
0
P
Printablesthall72

Lego Compatible (32138.dat) Technic Pin 3L Double with Axlehole

This model is compatible with the lego system.

Downloads
243
Likes
32
Rating
0
P
Printablesjp1011

Compact mATX 5.3L PC Case with GPU

Hey everyone here's my design for an ultra compact mATX case with GPU support. Intro: The build was made almost entirely from spare parts hence the unusual combination of hardware. The unconventional orientation of the motherboard was in…

Downloads
225
Likes
47
Rating
0
P
Printablesthall72
Downloads
194
Likes
18
Rating
0
P
PrintablesEinEisbxr

Fluval Flex 123l Lid Props

Modelled these Lid Props for my Fluval Flex 123l. For My configuration you need to print: -2x Fluval Flex 123l Front -2x Fluval Flex 123l Corner

Downloads
194
Likes
8
Rating
0
P
PrintablesSeb D

DeWalt Slegde Hammer 3lb Hook Wall Mount

Print with your favorite material, I used Sparkle ABS+ Bright Orange at 0.2mm layer height. Mount to the wall with #6 wood screws or metric equivalent 3.5mm Enjoy the easy open tool storage solution. Fell free to search my profile for…

Downloads
194
Likes
39
Rating
5
P
Printables43D PRINT

Fruit Fly trap for classic O,3l TO66 thread jar

Fruit Fly trap for classic O,3l thread jar working with classic 0,3 thread jar Lid name is TO66 Print settings 0.2 mm layer 4 walls 15%infill no supports

Downloads
190
Likes
55
Rating
4.75
P
Printablesjkv

Sub 3L RTX A4000 computer case

Custom completely printable SFF PC case able to fit Nvidia RTX A4000 (slightly modded). The goal was to design and develop the smallest possible PC with powerful workstation graphic card with four display outputs. Parts: MB: Asus ROG…

Downloads
184
Likes
26
Rating
0
P
Printablesberezovskyi

Vinyl Record Stand 3LP 4LP

I remixed the original model by 3D Logic (which is a remix of Wynn G's model) to make it compatible with thick boxes. My Daft Punk 10th Anniversary Edition 3LP failed to fit and thus I needed to add some depth to the holder

Downloads
183
Likes
28
Rating
5
P
PrintablesThe Mechanic

Hyundai i30N Fastback N Kona N Dosenhalter 0,33l

Dosenhalter für den i30N, Fastback N und Kona N für 0,33l Dosen. Mit diesem personalisiertem Dosenhalter verschüttet euch kein Getränk mehr beim Gas geben!

Downloads
178
Likes
8
Rating
0
P
PrintablesOskar_diy

ToF enclosure VL53L0X - GAGGIUINO

As I didn't found an enclosure that checked all the boxes, I've designed it myself. It's a an enclosure with a print in place hinge and embedded magnets. Has the space for the soldered wires that are going to stick through the back. The…

Downloads
177
Likes
11
Rating
0
P
PrintablesREDZC

Cover tin cover can lid tin lid can for beer, or lemonade (0.3l). Easy print. Against Insect. kryt plechovka napoje pivo limonada proti hmyzu

Use low layer height and flexible material, You can use brim. Tested PLA 0.15mm, brim, filament need cca 3.5m.

Downloads
176
Likes
11
Rating
0
P
PrintablesUnleashTheBeast

DDR2 DDR3 DDR3L SO-DIMM Rack for 40 Sticks

I needed a Rack for a big amount of DDR3/DDR3L SO-DIMMs, so they dont just fly around in antistatic bags and on countertops etc. Also works for DDR2, although I dont know why you dont just throw those away. DDR4 is a bit wider and doesnt…

Downloads
166
Likes
16
Rating
5
P
Printablesfocus

Filament Dry Box for 73mm spools - 6.3L

I love the original model of Dynarun but I wanted some changes. As I wanted to be able to fit bigger spools, I bought a 6.3L container and after the initial help of Dynarun to get a general fit, I recreated the complete model in Onshape…

Downloads
161
Likes
33
Rating
5
P
PrintablesAngelking_1987

Deckel für Dosen 0,33l | Lid for cans 0.33l

Deckel für normale Getränkedosen PLA Füllung 50%

Downloads
160
Likes
8
Rating
4
P
PrintablesBowdenBuilder

Airbus A330-743L Beluga XL Kit Card

The Airbus Beluga XL is a specialized cargo aircraft designed to transport oversized components, primarily for Airbus' own aircraft production. Introduced in 2019, it is based on the Airbus A330 platform and features an enlarged fuselage…

Downloads
157
Likes
23
Rating
5
P
PrintablesJOGIAREA

Aufgleishilfe H0 Modellbahn 3Leiter Märklin / Rerailing aid H0 model railroad 3-ladder

Einfache Aufgleishilfe, es wird Support benötigt, kann auch über eine Weiche verwendet werden Simple rerailing aid, support is required, can also be used over a turnout Category: 3D Printing

Downloads
154
Likes
9
Rating
0
P
Printablesthall72

Lego Compatible (64727.dat) 0 Bar 0.5L with Blade 3L

This model is compatible with the lego system.

Downloads
153
Likes
23
Rating
0
P
Printablesthall72

Lego Compatible (62519.dat) Technic Universal Joint 3L Centre

This model is compatible with the lego system.

Downloads
149
Likes
15
Rating
0
P
Printablest0b1

Test bracket for VL53L0X module

Test bracket for the VL53L0X ToF IR module from AZ-Delivery. I ordered a bunch of them and needed quite some tolerances for a model that fits them all. This was primarily a test print to verify if I got the dimensions right. OpenSCAD file…

Downloads
148
Likes
4
Rating
0
P
PrintablesJurotom

3R12 3LR12 battery adapter for old flashlights

It uses AA battery holder from aliexpress, like one shown in the last picture. I suggest printing it on it's back. You will need 2 strips of metal, preferably terminals from old battery. Wires are meant to be screwed in to terminals, but…

Downloads
143
Likes
10
Rating
0
P
Printablesthall72
Downloads
134
Likes
19
Rating
5
P
PrintablesAaron Johnson

Mazdaspeed MZR 2.3L oil funnel

This is a vented oil funnel for 2.3L MZR DISI Mazdaspeed engines (like my 2012 3). I could never find a funnel that sat well in the oil filler, so I made this one. It is rock stable on the engine. It fits snugly inside the filler hole,…

Downloads
127
Likes
15
Rating
5
P
PrintablesJens Friedrich

Source Deuter Bladder Dryer 3l

Dryer for Source Deuter hydration bladder 3l Version 1 as shown in the photos without step at the dryer's foot. Verision 2 with step at the dryer's foot for stabilized standing and better ventilation. Print Settings Rafts: No Supports:…

Downloads
126
Likes
13
Rating
5
P
PrintablesSander Leenders
Downloads
120
Likes
7
Rating
0
P
PrintablesGroni3D

Can dispenser for 0,33l elongated cans (long cans)

This is my own can dispenser. If you need different diemensions or anything is wrong you can message me :) Can diameter: ca. 60mm Can lenght: max. 148mm (than you have 1mm on each side buffer) Amount of cans it can hold: 11 cans Max.…

Downloads
120
Likes
14
Rating
0
P
PrintablesIonNight

Track Rod Link 3L-15L, Lego compatible

Imported from my designs on Thingiverse. Original upload was 21.01.2019 (dd.mm.yyyy) Track rods or links in sizes up to 15L. This a new version. The old one suddenly fell off after the PLA had dried for over half a year Apply a lot of…

Downloads
118
Likes
13
Rating
0
P
PrintablesDorffMeister

Housing for VL53L0X Time-of-Flight (TOF) sensor

Description If you print in the orientation provided, you shouldn't need supports. Also included in the photos is my Case for ElectroCookie Mini PCB Prototype Board . This housing is designed to accommodate a VL53L0X Time-of-Flight (TOF)…

Downloads
112
Likes
5
Rating
0
P
Printablesmarkus1575438

Trichter mit Schraubverschluss 45x4 DIN 45 und Ausgießer mit Belüftung für 3l, 5l & 10l

Für 3l, 5l & 10l Kanister Gewinde 45x4 (DIN 45) Ausgießer mit Belüftung, kurze und lange Version. Trichter mit Schraubverschluss Gedruckt in Petg For 3L, 5L, and 10L canisters with 45x4 thread (DIN 45) Pourer with ventilation, short and…

Downloads
111
Likes
10
Rating
0
P
PrintablesDzip1

Lid for metal cans (0,5L & 0,33L) - for your emblem

A lid for 0.5-liter and 0.33-liter beverage cans that prevents insects from getting into the can. On most cans, the lid snaps into place and won’t open on its own—this feature has proven useful in my car because it prevents spills.…

Downloads
109
Likes
10
Rating
5
P
PrintablesBobbyThunder

AA and AAA Battery Inserts for Really Useful Box 0.14L and 0.3L Containers

These are 2 quick prints meant for use with "Really Useful Box" 0.14L and 0.3L Containers to hold 20 AAA or 20 AA batteries. These are containers that I purchased for cheap at Staples. Each can hold 20 AAA or 20 AA batteries securely. I…

Downloads
106
Likes
36
Rating
0
P
PrintablesRagingRoosevelt

Large Volume Desiccant Box, 0.13L

This model should print fine with whatever default settings you have. No supports needed. The lid is set up with ~0.2mm clearance so most printers should be fine with this. If you run into tightness problems, try either sanding the edges…

Downloads
100
Likes
25
Rating
0
P
PrintablesCeptoRider

Liftmaster Remote 893LM Holder

Liftmaster Remote 893LM Holder Share your Make:)

Downloads
98
Likes
7
Rating
0
P
PrintablesMcGr3g0r

VL53L0X TOF sensor

This is chassis for VL53L0X Time of Flight distance sensor for my INAV 6.1 based F450 type drone to use as range finder. Use M4 nut and screw DIN 912 type (imbus) to connect dist_bdy4_top with dist_bdy3_top. Parts dist_bdy1_bottom,…

Downloads
92
Likes
4
Rating
0
P
PrintablesGroni3D

Can dispenser for 0,33l cans short

This is my own can dispenser. If you need different diemensions or anything is wrong you can message me :) Can diameter: ca. 66mm Can lenght: max. 115mm (than you have 1mm on each side buffer) Amount of cans it can hold: 10 cans Max.…

Downloads
91
Likes
13
Rating
0
P
Printablesbram17
Downloads
87
Likes
9
Rating
0
P
PrintablesDutylein

Honda CR-V CRV 1 Gen Coke Can Holder 0.33l (EU)

Can holder adapter for a first Gen CRV. For 0.33l coke cans with 60mm diamater. (Standard EU can).

Downloads
83
Likes
15
Rating
5

HMC5883L I2C Compass Module

This is a sizing blank.

Downloads
81
Likes
2
Rating
0
P
PrintablesTim Benware

5.3L Walnut Blaster Adapter

I designed this years ago to be able to do walnut blasting on GM 5.3L engines. It fits in the cylinder head opening but is untested in its effectiveness of operation.

Downloads
79
Likes
5
Rating
0
P
PrintablesSergey

Case for VIM3L

Case for Khadas VIM3L with M2X extension installed.

Downloads
79
Likes
4
Rating
0
P
Printablesblunaowl

IKEA 3L HALLBAR SKADIS mount

Originally, I was going to make loops that the bins would sit in, but when I realised there were little holes in the back of the bin edges, it got me thinking. Then I got distracted. Then I found and recreated the screw mounted version,…

Downloads
79
Likes
15
Rating
5
P
Printablesrevbem

6x3lever plus for Magnet Insertion Tool v2 from EmGI

This is a remix for the lever part from EmGi's excellent Magnet Insertion Tool. https://www.printables.com/model/1008467-magnet-insertion-tool-v2 The Magnet Insertion Tool is an awesome design. However I had troubles with the rubber. No…

Downloads
76
Likes
13
Rating
0

Radiator Flush & Plug Tools (1-1/4" ID Hose) For Ford 1.6L 2.0L 2.3L Pinto, Mustang, and others (V3)

I made these tools in order to allow me to store my engines without leaking everywhere or to allow me for a clean removal by leaving the radiator hoses on either the engine or Radiator, I have also included a few variations of some…

Downloads
76
Likes
16
Rating
5
P
PrintablesSmeltie

Vl53l0x Separator

The Vl53l0x is what's known as a time of flight sensor. This sensor can measure a distance using a laser! However these sensor are well.. sensitive and can detect a transparent visor pretty easily. As it is usually not possible to place…

Downloads
75
Likes
7
Rating
0

Adafruit VL53L1X sensor case

A case for the Adafruit VL53L1X TOF distance sensor with Qwiic connectors: https://www.adafruit.com/product/3967 Will also work for other Adafruit sensors with the same size PCB.

Downloads
74
Likes
1
Rating
0

Flaschenhalter 0,33l und 0,5l

Ich brauchte einen Flaschenhalter für die Werkstatt. Mittlerweile hängen aber auch an anderen Stellen im Haus welche, z.B. am Kicker ;-). Man schraubt einfach den Halter fest und schiebt mit Hilfe des Doppelschwalbenschwanz den Becher von…

Downloads
74
Likes
13
Rating
5
P
PrintablesMartin Tománek

LG 43lj594v stand

I loose my stand for my TV.. so here it is

Downloads
73
Likes
0
Rating
0
P
PrintablesJAudi23

QMC5883L (GY-271 ) Triple Axis Compass Magnetometer Sensor Module Housing

This design was created by Matthew Byington over in the Home Assistant Community, I am simply sharing it here with Matthew's permission for others to use. Used as an optional housing for the Gas Meter Remote Reading project found here .…

Downloads
71
Likes
6
Rating
5
P
PrintablesPHabermehl

fischertechnik Distance Sensor GY-VL53L0XV2V case

A fischertechnik compatible case for the shown Distance Sensor Breakout GY-VL53L0XV2V Category: Construction Toys

Downloads
70
Likes
2
Rating
0
P
PrintablesFaenum

3L self watering herb pot

A self watering pot designed to fit inside a 3L really useful box. Print and glue on legs, I found my box to not be flat in the bottom, so left off the middle leg so it sat in the box better. The middle leg isnt really needed. Thread a…

Downloads
70
Likes
24
Rating
0
P
PrintablesBigFootPL

Wildman 3L bag clamp for Motus Scooty 10 Lite

Clamp for rigid attaching Wildman 3 Liter bag do Motus Scooty 10 Lite. It will work for other scooters with 40x33mm pipe. Parts labeled U (up) go in place of the upper velcro, and D (down) in place of the lower velcro. Punch and drill…

Downloads
69
Likes
6
Rating
0
P
PrintablesYe_Sterday

VL53L0X Magnetic Enclosure for Gaggia Classic / Gaggiuino

If you want to use the cheap VL53L0X breakout board with your Gaggiuino as a water level sensor, here is an enclosure for it. Parts needed 2 disc magnets, 5 mm dia. x 2 mm ht. (same as for Scales Mod)…

Downloads
68
Likes
13
Rating
0
P
PrintablesRyno8705

3L Support Arm for Divideby0's Camelbak Drying Stand

This support arm is intended to be used with the original base and stem from Divideby0 and to fit a 3.0L Camelbak bladder without resting weight on the inner/center bladder support. I printed in PLA following the manufacture's print…

Downloads
67
Likes
13
Rating
0
P
Printablesiddofroom

ESP32 + TOF Sensor (VL53L0X) Box

a small boxs that hold ESP32 with Time Of Flight sensor, with multi state buttons

Downloads
67
Likes
4
Rating
0
P
PrintablesMatt

Chonk 3.0!!! The mostly 3d printed 3lb combat robot!

This is version (3) it uses n-20 drive motors and Futaba s3400 servos. for batteries I recommend these 3s models https://palmbeachbots.com/collections/batteries-chargers/products/copy-of-galaxy-3s-11-1v-lipoly-pack. This was designed in…

Downloads
61
Likes
16
Rating
0
P
PrintablesDave Rigotti

Endbots Vector Beetleweight (3lb) Combat Robot Remix

Remix of the popular Endbots Vector beetleweight (3lb) combat robot with numerous improvements.

Downloads
60
Likes
10
Rating
5
P
PrintablesFredrik S

Can holder 0.33L (sleek cans)

Just a simple holder for 0,33L cans (tall & slim cans). 64mm between the two M5 mounting bolts (standard) Works fine with PLA and PET/PETG, but PLA might break after 50 cycles or so. I have added a TPU/FLEX-variant as well, because I have…

Downloads
60
Likes
7
Rating
0
P
PrintablesAZ3D

Piggy - 3lb Combat Robot | Almost Fully 3D Printed! (V1)

Hi there, my name is Aaron and I built a 3lb combat robot! The files are not beautiful, but it works! Github: https://github.com/AZ3Dp/Combat-Robot-Repository

Downloads
58
Likes
9
Rating
0
P
PrintablesR3dp

Stanley 8oz(.23L) Flask Funnel

This funnel is made to ease the filling of a 8oz (.23L) Stanley Adventure Flask. The funnel only fits on the standard mouth flask not the wide mouth. It slips over the spout of the flask with an interference fit. This means that it should…

Downloads
57
Likes
3
Rating
0
P
Printableszzzy

Wine Box Stand 3L Kirkland Signature (Costco)

Inspired by thing:3215912 by t/u:AlpoHassinen , designed this 7in x 5in x 5in stand from scratch to fit the 3 liter Kirkland Signature wine boxes that can be found at Costco. Can optionally be used with my other design, the spill catch…

Downloads
57
Likes
8
Rating
5
P
PrintablesJack Zucker

bottle sleeve 0,33l

Vasemode sleeve for 0,33l-bottles like fritz-limo and becks (beer). Print instructions use vase mode

Downloads
55
Likes
13
Rating
5
P
PrintablesShawn

Leslie S3L Inspired Train Horn, works with air!

Build Notes This design started with a 1966 Leslie S-31 horn. The S-31 bell, back cap, power chamber, and single-bell manifold were drawn in Fusion 360 at full scale. This is still a work in progress. The files may change as I continue…

Downloads
53
Likes
9
Rating
0
P
PrintablesFE3D

AA to 3LR12

Battery adapter to mount 3x AA batteries in 3LR12 battery format. Worked well for an old swiss army flash light. Print all the models with 25% infill (the “Link” twice). Wrap the “Link”, the “Minus” and “Plus” parts in tin foil and insert…

Downloads
49
Likes
6
Rating
0
P
PrintablesWIESEMANN 1893

Extra Long Club Hammer 1250Grams/3LB for screws or peg board

Tool holder for Club Hammer 3LB/1350 Grams. We provide two versions to download: Screw: 4mm holes for standard screws for mounting on wooden or stoned walls Pins: for peg boards of standard size Sizes: L - 100mm W - 60.29mm H - 64.5mm We…

Downloads
49
Likes
11
Rating
0
P
Printablesmes mes

Bike Clip for 0.33l SLIM Cans

I modified it to fit slim 0.33l cans that are taller than usual cans. Now it fits cans that are around 145mm tall.

Downloads
46
Likes
9
Rating
5
P
PrintablesPDFYYC

Engine Cover Mounting Bracket for 1999-2003 Ford Powerstroke 7.3L Replaces Ford

printed in abs and has been holding up well try and keep hardware from old one. mine broke i leant on it

Downloads
45
Likes
4
Rating
0
P
Printablescrayzo

Y-Axis CNC Adapter for Paulimot/SIEG SX3L drilling/milling machine

I recently turned my Paulimot/SIEG SX3L drilling/milling machine into a CNC version of it and althugh I attempted to mill all adapter plates out of aluminum, I got lazy and built the Y-axis out of PLA and now share the result here.…

Downloads
43
Likes
10
Rating
0
P
Printablessprior

3L Ultrasonic Cleaner Lid Gasket

In setting up a mobile cart for my SLA 3D printer I discovered that it was hard to move without the liquid in my 3L ultrasonic cleaner sloshing out. So I modeled this gasket that fits inside the lid and in my case I hold the lid down with…

Downloads
42
Likes
9
Rating
0
P
Printablesalios

Airpot Base 3l - 150mm

A replacement base for 3 liter Airpot

Downloads
42
Likes
7
Rating
5
P
PrintablesHoge

Oil Tank Level Sensor Enclosure (ESP D1 Mini+ VL53L0XV2)

This 3D-printed enclosure is designed for an ESP module ( D1 Mini ) and a VL53L0XV2 time-of-flight sensor for monitoring the oil tank level of a heating system. The model is designed for an oil tank with a BSP G1 1/2 thread but can be…

Downloads
41
Likes
2
Rating
0
P
PrintablesBecca

Lanyard compatible with Mazda Gas Cap GS3L-42-25OB

Lanyard compatible with Mazda Gas Cap GS3L-42-250B. Fits well on a Late 2000s Mazda CX-9 Stock Gas Cap. Reuse the stock plastic screw. Printed in Ninjatek Cheetah Orange TPU

Downloads
39
Likes
5
Rating
0
P
PrintablesJEO

Harbor Freight Work Light 3LED Removal Modification

This modification allows you to remove the 3 LEDs from the end of the light to be used with another project and replace the lights with a blank panel. In this process one short piece of wire soldered across two contacts make the other…

Downloads
39
Likes
14
Rating
5
P
PrintablesTina Schulz

Voron Switchwire Orange PI PC/PC2/3LTS/etc. mount

ABS printed 4 walls, with 40% infill 4 M3x8 socket head screws to mount the PI

Downloads
36
Likes
9
Rating
0
P
PrintablesM²E

Icom HM-243LS Holder

Halterung für das Icom HM-243LS (Lautsprechermikrophone) Holder for the Icom HM-243LS (Speaker Microphone)

Downloads
35
Likes
2
Rating
5
P
PrintablesGroni3D

Can dispenser bottom 0,5l top 0,33l elongated cans (long cans)

This is my own can dispenser. If you need different diemensions or anything is wrong you can message me :) General information: Max. height: ca. 390mm Max. lenght of the dispenser: 412mm Dovetail joint tolerance: 0,19mm Hexagon joint…

Downloads
35
Likes
11
Rating
5
P
Printablespohukai

3lb grapnel style anchor for float tube fishing

I needed a small anchor while float tube fishing in the harbor to hold me from drifting due to small currents (tides) and light breezes. After a little research, a 3 lb anchor seemed to be about right for this. Having several 1 1/2" pvc…

Downloads
35
Likes
11
Rating
0
P
PrintablesMika Günther

3L Bottle Hookah

This is my first 3d Designed and Printed Hookah. I used an old 3L Bottle of Berentzen. Every Bottle with a neck OD of 36mm and a length of 36mm would work The Thread of the Base is a 45x4,5 Metric Thread The Pipe is a 16mm OD Aluminum…

Downloads
35
Likes
3
Rating
0
P
PrintableswithanHdammit

QwiicBus I2C Extender endpoint with VL53L0X ToF

This is the case I designed for the QwiicBus I2C Extender endpoint with the VL53L0X Time of Flight (ToF) sensor. This was designed for the side distance sensor for ResinChem Tech's Parking Assist project. I built the original Parking…

Downloads
34
Likes
2
Rating
0