Search results: 4010

Sort order

571 models

P
PrintablesLucas Ribeiro

4010 fan adapter ender 3 v3 se

V2 of this project comming soon. New version of is model avaliable here. The printer get way quieter after the change, the best mod I did on my Ender 3 You will need 2 M3 screws and a 4010 fan, of course. If you like this model check out…

Downloads
1,308
Likes
167
Rating
5
P
PrintablesWivi2013

Extruder Mounted Support for 4010 Fans For Stock Ender 3 V3 SE Hotend

The newer Ender 3 V3 SEs have different extruder motors, for some reason, compared to the early ones. How can you identify it? The newer ones don't have screw mounts on the sides and have a silver plate compared to the black plate with…

Downloads
72
Likes
7
Rating
0
P
PrintablesAndre Williams

Fan Blade for Ryobi Leaf Blower Model (RY404010VNM)

This replacement fan blade fits a Ryobi blower model RY404010VNM and works great using PLA material and nozzle 0.4.

Downloads
58
Likes
9
Rating
0
P
PrintablesAlex@APTO

MCU cooler (4010 4020) for Prusa XL

(English below) Ein klassisches Problem des Prusa XL, insbesondere bei höheren Umgebungstemperaturen oder Verwendung eines Enclosures: Die MCU überhitzt. Ihr Abdeckblech bietet keine Möglichkeit zur Entwärmung, da weder Kühlrippen,…

Downloads
14
Likes
4
Rating
0
P
PrintablesWaikikiprod

4010 Axial Fan 3D Model .step & .stl

________________________________________________________________________________________________________________ 🇬🇧English🇬🇧 ((In 🇫🇷Français 🇫🇷 at the bottom of the page )…

Downloads
4,638
Likes
139
Rating
5
P
PrintablesScrath

Satsana Remix for Ender 3V2 and Ender 3 with BLTouch / 4010 and 5015 Fan versions

This model was originally posted on thingiverse by me and is still available there if you want to read through the many comments and questions. This is a remix of the Satsana fanduct by eric-anastas for the purpose of mounting it on the…

Downloads
3,990
Likes
431
Rating
4.88
P
PrintablesGrey

4010 Fan grill

This is a simple honeycomb fan grill for 40x40mm fans, as they are typically found on consumer grade 3D printers.

Downloads
1,969
Likes
190
Rating
5
P
Printablesschreider

Quietmode! Flashforge Adventurer 5M (AD5M) Back Panel w/ 120mm & 4010 fan

Disclaimer: Before you start doing anything with electrics, make sure that you understand what you are doing and comply with all conditions for your safety, the safety of others, as well as the safety of equipment.…

Downloads
1,900
Likes
575
Rating
5
P
Printablessadkovvsky

Ender 3 V3 SE 4020 / 4010 fan mount

________________________________________________________________________________________________________________ My other Ender 3 V3 SE mods Fan mods: Ultimate Ender 3 V3 silent upgrade Voronoi fan cover Printer mods: Tool holder Filament…

Downloads
1,600
Likes
192
Rating
5
P
PrintablesBen

Ender 3 V3 SE 4010 Fan Shroud

MK15.1 is the latest and suggested version to use, the other versions may not work as expected but have been left here for users that already have the previous versions and want to print it again. Hexagon Pattern can be printed with two…

Downloads
1,330
Likes
206
Rating
4.5

Kingroon KP3S 3.0/PRO mod for E3D V6 / Bambu Lab Hotend + 4010 Fan (UPDATED)

Print settings: KP3S V6 Heatsink Cooler.stl - NEEDS SUPPORTS 5015 Fan Holder.stl - NO SUPPORTS KP3S Nozzle 5015 Duct.stl - NO SUPPORTS (print slower - high overhangs) You need to print 3 files for the complete assembly. Variations below.…

Downloads
1,315
Likes
249
Rating
4.93
P
PrintablesTrocheHole

KP3S — Modular 4010/5015 Fan Shrouds with BLTouch Mount — Kingroon

Modular print head ASSY for Kingroon KP3S 3.0 with Titan Extruder and 4010/5015 fans. Notes on Model Files Please download just the STL file of the 5015 fan shroud from the “KP3S — Modular 5015 Fan Shroud — Kingroon” page. This 5015 fan…

Downloads
1,216
Likes
248
Rating
5
P
PrintablesTheDude

Ender 3 v3 SE 4010 Fan shroud diffuser

4010 Mount for Ender 3 v3 se

Downloads
1,214
Likes
105
Rating
4.78
P
Printablessadkovvsky

Voronoi 4010 / 4020 fan cover

Simple model of fan cover with voronoi style. Space between fan and tall fan covers might help with noise reduction, i haven't really tested it.

Downloads
875
Likes
84
Rating
5
P
PrintablesFunFunBoy

4010 Fan on Din Rail Mount

config file for using the fan to cool a Raspberry pi on Klipper [temperature_fan Raspberry_Pi] ;## Connect Raspberry Pi Fan in LED-G position pin: PB5 max_power: 1.0 shutdown_speed: 0.0 cycle_time: 0.01 hardware_pwm: false…

Downloads
846
Likes
100
Rating
4.8
P
Printablesrogerquin

Back mounted cooling fan duct for SOVOL SV06 3d printer with 4010 blower fan

***IMPORTANT*** Some users have experienced difficulties snapping the fan in place. Please measure the fan duct to confirm your printing results have the recommended measurements before installing the fan. If your measurements are not…

Downloads
835
Likes
128
Rating
4.71
P
Printablessadkovvsky

Ender 3 V3 SE 4010 / 4020 fan mount

________________________________________________________________________________________________________________ My other Ender 3 V3 SE mods Fan mods: Ultimate Ender 3 V3 silent upgrade Voronoi fan cover Printer mods: Tool holder Filament…

Downloads
835
Likes
98
Rating
5
P
PrintablesHDT_dŠ

Thule Urban Glide - Fold Lock Anchor 40107011

Thule Fold Lock Anchor 40107011 For Urban Glide 2, Glide 2 a Urban Glide 2 Double.

Downloads
817
Likes
34
Rating
5
P
Printablesrfinnie

Yet Another Ender 3 V2 fan assembly remix (Satsana style, BLTouch, 4010 + 5015 fans)

Posted as a remix for a commenter on my make of the ideal "Satsana Duct Remix for Ender 3v2 - integrated BLTouch mount (4010 + 5015 fans)" , plus the following changes: Added a cross bar between the front of the BLTouch mount and the main…

Downloads
738
Likes
77
Rating
4.75
P
PrintablesGuilouz

FLSUN V400 Fanduct for 4010 fans

FLSUN V400 Fanduct for 4010 fans. I recommend this fans (24V Ball 12000RPM) : https://fr.aliexpress.com/item/32798634077.html?spm=a2g0o.order_list.order_list_main.13.21ef5e5b8i2sK2&gatewayAdapt=glo2fra

Downloads
710
Likes
94
Rating
5
P
PrintablesEmbrace Making

Snapmaker A250T / A350T Multi Outlet Part Cooling Duct (optional 4010 fan)

Fits Snapmaker A250T and A350T. Check the images to see if your 3D printer tool head looks the same. Instructions: This page is for the multi duct part cooling fan adapter and spool holder parts. The Snapmaker A250T and A350T are…

Downloads
706
Likes
31
Rating
5
P

Raspberry Pi 4 Case with 4010 Fan

Description I couldn't find a good case for the Raspberry Pi 4 that had all the features I wanted, so I decided to make my own. Here's what makes mine unique: Held together with screws. Snap-fit cases are great if your printer is REALLY…

Downloads
611
Likes
55
Rating
5
P
PrintablesKILLbabylon

Ender3 V3 SE dual 4010 shroud for k1/ke hotend

Introducing the Mount for the Dual 4010 Blower and 4010 Hotend Fan. 🛠 Features: Purpose-built for accommodating the dual 4010 blower and 4010 hotend fan, ensuring efficient cooling. Final version got kitty ears :3 📏 BOM: 4x M2 nuts 2x M3…

Downloads
607
Likes
147
Rating
5
P
Printables3DMegoldasok

BTT SKR Mini E3 4010 Fan holder

BTT SKR Mini E3 4010 Fan holder. (For voron V0.1 or other printers) -3x M3x25 Screw for board and holder. -2x-4x M3 Screw for fan fix (length depends on the fan) -Ink. STP Assy. for Remix. I use for V2 but its work with v1.2 and v3 also.

Downloads
603
Likes
83
Rating
5
P
PrintablesJonathan Gahan

Ender 3 v3 SE 4010 Fan Honeycomb Diffuser

Fan shroud diffuser with better airflow, and compatible with Sand's Lightweight Fan Shroud. Like many of you, I experienced the shrieking death of the stock 2510 cooling fan on my Ender 3 V3 SE. I liked TheDude's fan shroud, but found it…

Downloads
601
Likes
76
Rating
4.78
P
PrintablesForrest O.

Ender 3 V3 SE Lighter 4010 Fan Shroud Diffuser

Is your 2150 fan dying and needs replaced? Is the cooling system for the hot end “inadequate” for you? Well, here's you're solution. It's designed around my other fan shroud , but made for this use case. I went through one prototype that…

Downloads
580
Likes
75
Rating
4
P
PrintablesAsica10

Bento Box - Filter with Hepa + Carbon + 4010 or 4020 fans

Shortended BentBox filter, design from scratch. Carbon and Hepa boxes can be stacked and interchangeable. Support fans 4010 and 4020 and 40x80x15 Hepa filter. For avoid air leakage recommended to use TPU 1.75 filament like a seal. Boxes…

Downloads
558
Likes
111
Rating
5
P
PrintablesSteve

MBOT3D MK2 Remix (Ender7 style fan duct with dual 4010 fans)

Update: Ahmad has created a version 2 of his design - please go check it out and donate to him: https://grabcad.com/library/mbot3d-mk2_rev2-0-ender7-style-fan-duct-1 Important: This is a remix of…

Downloads
556
Likes
100
Rating
4.8
P
PrintablesAleksotti

Flying Bear Reborn 2 fan duct V2 with cover 4010

Detail printing by entry down with supports. Layer height 0.2 mm Nozzle 0.4 mm

Downloads
551
Likes
32
Rating
5
P
PrintablesNadir @ CN3D

BTT SKR Pico 4010 Fan mount

Later edit: I have added a 20mm tall version i prefer the 25 because i can easily remove/insert the Neopixel and Det Plug for the 20mm version you will need M3x25mm instead of M3x30 If you want to but this Board here is an affiliate link…

Downloads
547
Likes
86
Rating
4.86
P
PrintablesValerie Moore

SV08 4010 fan mount

ok i have fixed the old versions flaws and now this works great. make sure to have the fans blow away from the board. the MCU fan now blows out the original hole. you can make these changes in your printer.cfg to have the fans use PID.…

Downloads
544
Likes
97
Rating
4.93
P
PrintablesALX-24

mini Satsana Dual 4010 Remix for Ender 3 v2

V1.1 Update: Redid some of the geometry at the front, modified the back for better and more enclosed hotend and cooling air separation and for better cable routing. It's a remix of the miniSatsana fan duct and hot-end cover for the Ender…

Downloads
543
Likes
72
Rating
3.67
P
PrintablesKILLbabylon

Ender3 v3 SE/KE dual 4010 blower shroud for K1 hotend (blank/crtouch/eddy)

It's simple and looks not that bad. Print this in PETG/ASA/ABS Supports are required. Layer height 0.2mm Cooling is not the problem. Feel free to remix this or ask for modifications. PS: I will add photos when I get home. I was running…

Downloads
520
Likes
140
Rating
3.8
P
Printablesx64

Simple Creality Ender 3 v3 KE triple 4010 fan mount

Simple fan mount replacing the whole Ender 3 V3 KE extruder housing, while improving on it by including a bigger 4010 fan. It's designed to be printed easily, without unnecessary overhangs, at the expense of some additional weight and…

Downloads
511
Likes
78
Rating
4.5

Sovol SV06 4010 Fan Duct

After realizing my factory fan duct was broken I quickly drafted this replacement fan duct up to get back to printing. I am currently testing this in PETG (ABS recommended) and will be providing a couple of improvements soon. I will…

Downloads
510
Likes
74
Rating
4.75
P
PrintablesEldarHan

Creality Ender 3 V2 - Clean Shroud 2.0 (40x20mm Hot-End Fan, 4010 Blower Fan)

This replaces the original Shroud For 40x20mm Hot-End Fan and the stock 4010 Blower Fan! I made a new version of my "Clean Shroud" that holds a 40x20mm Hot-End Fan and the stock 4010 Blower Fan (with its mounting) for Creality Ender-3 V2.…

Downloads
506
Likes
66
Rating
5
P
Printablesyurlinsky

FAN 4010

3D model of fan 4010 in f3d and step format

Downloads
504
Likes
24
Rating
0
P
Printablesmobiobi

4010 Fan Blades

Replacement blades, in the style of the T33.

Downloads
495
Likes
50
Rating
5
P
PrintablesNavierIsStoked

Micro Swiss NG Shroud with Dual 5015 Blower Fan Part Cooling and 4010/4020 Axial Fan Hot End Cooling

Recently upgraded to the Micro Swiss NG for my Ender 3 v2. While the kit from Micro Swiss includes a shroud to use the stock 4010 axial hot end fan and 4010 blower part cooling fan, I wanted to use larger fans. I looked around and found a…

Downloads
472
Likes
58
Rating
4.83
P
PrintablesMr7

Taurus Voolcano Cooling Duct for Creality Sprite Extruder, Dual 5015 Fans, Ender 3 S1/S1 Pro/S1 Plus Sonic Pad sensor mount heatbreack cooling 4010 fan

It's a modifified Taurus cooling duct to be used with a voolcano heatblock and nozzle. I've also made heatbreak fan mode that uses stock 4010 fan (it's lighter than the stock setup). If you print from ASA/ABS remember to scale model for…

Downloads
444
Likes
86
Rating
5
P
PrintablesC0co

StealthChiller - A 4010 blower fan mod to replace the Mini Stealthburner

First of all: What is this about? I really like the look of the Mini Stealhburner, but I dont like its weak cooling performance on my Voron 0.2. This printer is capable of printing fast - especially with a CHT nozzle. But overhangs,…

Downloads
436
Likes
112
Rating
5
P
Printablessadkovvsky

Ender 3 V3 SE 4010 blower fan shroud

________________________________________________________________________________________________________________ My other Ender 3 V3 SE mods Fan mods: Ultimate Ender 3 V3 silent upgrade Voronoi fan cover Printer mods: Tool holder Filament…

Downloads
433
Likes
30
Rating
0
P
Printablesdzxxx2331s

TwoTrees Sapphire Mint Mount Improved 4010 Fan Duct

The original design has a large flat bottom, which for some reason would always sag downwards for me, sometimes colliding into prints. This remix minimizes that bottom surface such that the sag points are eliminated. The bottom is also…

Downloads
430
Likes
27
Rating
5
P
PrintablesAmyCol

Dual 4010 Mini Satsana for Ender 3 V2 (Adjustable height)

I wanted to use the Dual 4010 blower version of the Mini Satsana duct on my Ender 3 V2 but I couldn't find a remix that had converted it to be compatible with my printer so I made it myself. I also made it height adjustable to allow…

Downloads
417
Likes
61
Rating
5
P
Printablesstat1kDesigns

Creality Sprite/Sprite Pro 4010 Hotend Fan

I wasn't happy with the 4020 Noctua fan, so I decided to use the 4010 that came from the part cooler on the hot end. It's a lot more tolerable than the stock fan, and will be a good upgrade for anyone that has an extra 4010 fan laying…

Downloads
384
Likes
58
Rating
4.86
P
PrintablesDavidB.

Dual 4010 Fan Duck and shroud for Creality Ender 3 V3 SE

The ENDER 3 VE SE Dual Fan Project. Hi everyone, As I was looking at my Ender 3 V3 SE, I got the feeling than the original fan shell was too common and lacking some originality. As I also had another brushless Creality 4010 fan as spare…

Downloads
374
Likes
60
Rating
4.75

BIQU H2 4010 Fan Duct

This design is a simple fan duct made for the BIQU H2. It mounts on the front of the extruder itself and is very simple. The duct is fixed position, as this is just easiest for me to design - please feel free to comment if you have any…

Downloads
373
Likes
14
Rating
0
P
Printablesspontaniel

4010 Fan Mount for BIQU H2

I tried a lot of fans and fan mounts for part cooling for the BIQU H2 on my Ender 3 - nothing worked really So i designed this 4010 radial fan mount. It is simple and works. i also designed a fan shroud fitting this setup. Note on BIQU H2…

Downloads
371
Likes
19
Rating
4.67
P
Printableschrisseebee

MiniMe Remix (Height Adjustable) - 4010/ 5015 Part Cooler

Source file: https://cad.onshape.com/documents/6d2b5ab70346f30288cee4bc/w/581da15e481f8d17d003e36b/e/63c9a12203e9ab6971e0f0a6?renderMode=0&uiState=62ba698e4404174302000963 Small change to the v4. The slice engineering mk8 heat break was a…

Downloads
346
Likes
31
Rating
4.83
P
PrintablesShoshke

Delta Cooler - Ender 3 V2 dual 4010 blower cooler with ABL support

Introduction: The design was made to be aesthetically pleasing, offer improved part-cooling while also supporting a BL-Touch or CR-Touch ABL. It is a replacement for the stock cooler however will require an additional 4010 blower. NOTES:…

Downloads
344
Likes
72
Rating
5
P
Printablesashraful

4010 replacement fan blades for Ender 3 V2

Print in PETG, 0.2mm layer height, no support required. Press fits nicely. Do this mod at your own risk. :) (Optional but recommended) Carefully push the fan blades from both sides to remove the fan blade rotor from the casing. Cut all…

Downloads
343
Likes
24
Rating
5
P
PrintablesCrypt

Ender 3 eB Dual 4010 Fan Shroud

I loved the minimal footprint of the original eB shroud, but was still having trouble with one-sided cooling. This remix adds a second fan and moves them to either side, with the same core designed by gibbed. No supports needed 25 grams…

Downloads
332
Likes
46
Rating
4.8
P
PrintablesOptimusJoe

Ender 3 V3 SE 4010 Angled Fan Mount and Cover

You want to use the angled fan mount for the Ender 3 V3 SE but cannot use them because you have the newer version that does not have the side extractor screws? Now you can. Using the low profile bracket to screw into the heat sync, I…

Downloads
318
Likes
46
Rating
5
P
PrintablesBen

Ender 3 V3 SE Dual 4010 Shroud

I am not responsible if you break your printer for any reason using this shroud. If you require a shroud that works with the stock configuration please check out my single fan shroud here;…

Downloads
318
Likes
92
Rating
0
P
PrintablesLuiz Nic

Creality 4010 Replacement Fan Blades for Ender 3

Since I wasn't able to find any model that fits on the stock ender 3 fan, I've designed this model to replace the blades of the stock fan, it fits with pressure and works pretty well. Just be sure to rip everything from the broken blades…

Downloads
314
Likes
29
Rating
5
P
Printablesshow_the_work

E3D v6 dual 4010 fan duct

Dual 4010 fan duct for E3D v6 setups Optimized for ease-of-use and broad compatibility with different setups. If you have any requests or suggestions, leave a comment and I'll see what I can do! Features: - Unobstructed front, so you can…

Downloads
297
Likes
36
Rating
0
P
PrintablesMartín Ibazeta

Fan Duct 45 degree angle 4010

This is a fan duct for the Franzoli Direct Drive Ender 3. I have an Ender 3 v2, and since I printed this direct drive, I've had better, faster, and shorter retractions, but I've also encountered a lot of cooling problems, such as curling…

Downloads
294
Likes
23
Rating
4
P
PrintablesGRO

Bip&Go TRP-4010 Holder Mazda CX-30

The holder for my BIP&GO has been lost so I made a new one Use PETG with organic supports to print I used an 0.6mm nozzle with 0.3mm

Downloads
289
Likes
24
Rating
5
P
PrintablesAlvin Fung

Sunlu S2 Dryer 4010 Fan Mod

Aim to add a 4010 fan on the ptfe hole to get better drying performance Use the 5.5*2.1 DC Power splitter to get power for the fan from the origin power supply BOM 5.5*2.1 DC-022B Female Jack…

Downloads
288
Likes
93
Rating
4.33
P
PrintablesJames

4010 Fan DIN Mount

Based on the ingenious design by [jwags55](https://www.thingiverse.com/jwags55). This remix is designed to fit standard 4010 fans (with or without built-in nut traps). It should be a tight fit on 35mm DIN Rails and hold the fan securely.…

Downloads
286
Likes
37
Rating
5
P
PrintablesRunZe

BTT SKR Pico / RPi 4010 Fan bracket

This bracket was designed to mount a 40x40x10mm fan onto the SKR Pico board, compatible with RPI3, RPI4, RPI5. Use 4 BHCS M3*14 screws and nuts to mount the fan on the bracket, and then install the bracket on the motherboard with M2.5 or…

Downloads
281
Likes
35
Rating
5
P
Printablesaaronsaurus

Ender 3 V2 4010 Satsana w/Fan Duct Cover

Personal Test. Needed to transfer/upload files :)

Downloads
274
Likes
20
Rating
4.5
P
PrintablesDakhunter

Voron XOL2 Faceplate for 4010/3010 Fan

Updated: MMU version so you can print the Voron logo in-place. Follow this guide to calibrate your printer to do it Updated: Faceplate now can support both 3010 and 4010. Put heated inserts in the correct location depending on what fan…

Downloads
273
Likes
40
Rating
0
P
PrintablesRK23

Mini-Satsana Lite Dual 4010 - Ender3v2 BLTouch Steel-Mount (REMIX)

I'm really like the original miniSatsana Light, but the design interfere with BLTouch steel-mount from Creality that already attached to my Ender3v2, rather than messing with BLTouch offset, I remix the original design so it can be use…

Downloads
250
Likes
24
Rating
5
P
PrintablesGelatinousSlime

Voron V0 Kirigami Bed 4010 Blower

I was struggling to get the chamber temps up in my Voron V0 and research led me to the use of bed fans to help circulate and distribute heat from the bed. There were not a lot of options for the Voron V0 with Kirigami bed so I decided to…

Downloads
249
Likes
74
Rating
5
P

Mini-AfterSherpa Voron 0.1 Dual 4010 Fans

This is a mod of the Mini-AfterSherpa to mount 2 4010 fans. To get it to fit onto the x carriage some plastic needs to be removed around the side and bottom of their insets on the x carriage. The fan ducts some filing and superglued in…

Downloads
244
Likes
41
Rating
0
P
PrintablesTravis G.

4010 Fan blade

Somehow I broke one of the blades on my Ender 5 Plus hotend fan. I didn't have a replacement and didn't want to wait for shipping on a new fan so I made a new blade to replace the broken one. This blade will require you to remove all…

Downloads
244
Likes
15
Rating
0
P
PrintablesGranc3k

4020&4010 Ender 3 V2 NEO Fan duct

I wanted to have a fan duct with 2 noctua fans. Primary 4020 fan for hotend and secondary 4010 fan for cooling of the printed part and also easy accesibility to replace the nozzle or to do maintenance on the hotend. For installation you…

Downloads
238
Likes
29
Rating
0
P
PrintablesNkosi Smith

Easy Ender 3 V2 4010 Fan Shroud (no extra hardware)

This is a quieter, lighter, and smaller (in every direction) fan shroud than the stock shroud for the Ender 3 V2. I really liked the design of Printercat64's fan shroud , but when I tried to fit it on my printer (even after modifying the…

Downloads
236
Likes
37
Rating
5
P
Printablesru_di_y

Bigtreetech Octopus Pro cooling 4010

Bigtreetech Octopus cooling 4010

Downloads
234
Likes
48
Rating
5
P
PrintablesBladan83

mini Satsana dual 4010 light

This is a little optimization of the original setsana - mini remix. I removed the the bridge between the two fanduct to have a better view of hotend. This mod keeps all advantage of setsana fan duct more: -4% of material -3% print time…

Downloads
232
Likes
34
Rating
5
P
PrintablesShikko

3010 to 4010 Fan Adapter

Its a adapter for 3010 fan to fit in 4010 fan enclosure. Increase wall count for the screw to fit tight. Fast print and no support needed.

Downloads
232
Likes
19
Rating
4.5
P
PrintablesBelleNottelling

Mini Satsana - Better BL Touch Mounting (Ender 3 Dual 4010)

Original Model's Issues I really liked the original Satsana remix that Kenny did in the form of the Mini Satsana, but I found the BL Touch mount made for it functioned really poorly for me in two major areas: I found that the mount could…

Downloads
228
Likes
25
Rating
5
P
PrintablesElitCraft

Creality K1 extruder motor 4010 fan mount Mod

4010 format cooler holder for cooling the extruder motor to solve the known problem of overheating and jamming of the rod. It features convenient installation - without the need to remove the filament and reinforced side holders. Printed…

Downloads
226
Likes
32
Rating
5
P
PrintablesBen

Slim Ender 3 V3 SE Dual 4010 Shroud K1 Edition

The new slim K1 shroud now supports my improved fan ducts (finally managed to learn how to do that). Print the ducts in PETG, ABS or ASA. The shroud can be printed in what you want, maybe not flexible filaments :) -BOM: 10x M3*8 Screws 8x…

Downloads
225
Likes
57
Rating
3.67
P
PrintablesDabovos3D

Satsana Ender 3 V2 4010/4020 + 5015 Fan Duct with BLTouch

Print Settings Printer brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 0.2 Infill: 15% Gyroid Filament brand: ICE Filaments Filament color: Red Filament material: PLA Notes: "Support overhang angle" set to 88 degree…

Downloads
222
Likes
30
Rating
4.5
P
Printableslayer.shifted

4010 Axial Fan sidegrade for LS Fanmod(Neptune4)

For this Remix you can follow the Assembly instructions of the Original Design. This set will only replace 1:1 the parts from the original with the ones from here. The Center Carrier of this set provides an additional advantage over the…

Downloads
219
Likes
33
Rating
5
P
PrintablesDARISON VINCENT

4010 fan blade

this is a fan blade for 4010 size creality fan…

Downloads
218
Likes
16
Rating
0
P
PrintablesTwoTwoEleven

Clockwork 2 / LDO Nitehawk SB cover with 4010 fan mount

The RP2040 chip of the LDO Nitehawk SB toolhead board gets very hot with an enclosed chamber and is also mounted on the back side of the board facing the extruder motor which adds to its heat exposure. For a 55C+ chamber temperature I was…

Downloads
218
Likes
33
Rating
5
P
Printablesschreider

Fanmode! Flashforge Adventurer 5X (AD5X) Back Panel w/ 120mm & 4010 fan

⚠ Please note: So far, I haven't had time to print and test this model myself. If you run into any issues — please leave feedback so I can improve it. 🧾 Disclaimer Before working with any electrical components, make sure you fully…

Downloads
217
Likes
75
Rating
4.67
P
PrintablesDani_SWX

Sovol SV08 CN3D shroud cover for 4010 fan

I remixed Nadir's CN3D cover version for a 4010 fan above because I didn't have a 3010. I also added some holes for cable tie mounting and optimized air outlets. Before use, check the distance between the cover and the upper front…

Downloads
213
Likes
37
Rating
5
P
PrintablesTroy

Minmus mod 4010 dual fan hotend

https://cults3d.com/en/3d-model/tool/minimus-hotend-cooler-system remix/mod ROGUE_DESIGNS -Keep your machine Lite and Accurate- Removes in seconds. Tuned & focused cooling. Effective parts cooling at 60% fan speed. Excellent visibility of…

Downloads
213
Likes
8
Rating
0
P
Printablesd.revan

BTT PiTFT50 v2.1 Case with Raspberry Pi and 4010 Fan (Klipper Screen)

I needed a case to fit the BigTreeTech PiTFT50 v 2.1. There are several cases out there for prior versions of the screen, but I couldn't find one to fit the latest version that I liked. There are a couple of key differences in v2.1 versus…

Downloads
213
Likes
24
Rating
4.8
P
PrintablesDirtClodimus

Ender 2 Pro 4010 Blower Fan Ducts

I pieced together a hotend for my Ender 2 Pro and the stock part fan duct would no longer work for my needs. I designed these ducts to replace the stock ducts. YMMV on if it'll fit your printer or not. There is a tall and short version.…

Downloads
212
Likes
12
Rating
0
P
Printablesrdstov

BIQU CB1 Heatsink 4010 Fan

Fan Mount for BIQU CB1 Heatsink. I have included 2 files. One for mounting screws from bottom (Threaded) and one to screw down from above (this was made specifically for the Manta m5p board, as the screws are placed from the top down, but…

Downloads
212
Likes
22
Rating
5
P

4010 fan spacer

fake 4010 fan

Downloads
212
Likes
10
Rating
5
P
Printablessnöw

Creality Ender 3 V3 KE 3x4010 40mm fan shroud

As said above a modified shroud made to fit three 40x10 fans. Low profile mount for the hot end for reduced air travel and sleeker look. Also vertically rotated nozzle cooling fans with a customized exhaust for optimal cooling (Aero…

Downloads
211
Likes
50
Rating
0

Bambu Lab P1P 4010 Fan Bracket

Made some adjustments to the great original design by k.grzegorczyk . Printed out of PETG and used 4 x 10 mm socket head bolts to secure the fan to the bracket. https://wiki.bambulab.com/en/p1/manual/precautions-for-P1P-enclosure

Downloads
210
Likes
37
Rating
5
P
PrintablesSynthead

Ender 3 NG v1.2 CFD-tuned 4010 tool head with ENG logo

Here's a fancy set of 4010 tool heads based off the updated CFD-tuned air ducts! This model adds an Ender NG logo cutout over the fan as a fancy grill. I also fixed the stringy bridges in the lower vent by reshaping the duct (see…

Downloads
207
Likes
24
Rating
5
P
PrintablesJanRos17

Creality Ender 3 V3 SE 4020 / 4010 fan mount

Due to the lack of mounting points in newer printers, I made a version that attaches to the motor without any complications. Needed parts: 4x - 3Mx25 screw for 4020 fan (3Mx15 for 4010 i guess) 4x 3M heatset

Downloads
206
Likes
38
Rating
5
P
PrintablesFreddy

Side Cooler for 4010 blower

I originally made it for a new fanduct, I designed for my Phaetus Dragon. You can find it in my prints :-) It fits a standard 4010 blower fan. Print time for me was about 1 hour.

Downloads
202
Likes
16
Rating
5
P
PrintablesEldarHan

Creality Ender 3 v2 - Clean Shroud (40x20mm Fan & Stock 4010 Blower)

This replaces the original Shroud For 40x25mm Hot-End Fan and the stock 4010 Blower Fan! I made a new shroud from scratch for a upgraded 40x25mm Hot-End Fan and the stock 4010 Blower Fan (and its mounting) for Creality Ender-3 V2. The…

Downloads
202
Likes
27
Rating
5
P
PrintablesVulpes

4010 turbine fan double duct for ceramic hotend - Ender 3 V3 SE

Double duct for ceramic hotend If you have printed a model, please leave a review and share a photo of the finished part, which will help others make a choice.

Downloads
201
Likes
31
Rating
5
P
PrintablesLucas M. Santos

creality sprite - Fan Duct 4010

Fan duct for ender 3 s1 Adding an additional fan to cool the media can offer a number of significant benefits to print quality. Overhangs: Controlled cooling helps to print overhangs more accurately, as the material does not have the…

Downloads
201
Likes
28
Rating
5
P
Printablestheory

Voron MiniStealthburner - 4010 Fans/BambuLabs Hotend

Still in Beta, requires some testing to make sure everything works well. Requires m3x50 BHCS, heatset inserts, and 4 m2x12 screws. Modified Long's Mantis X Carriage with KlickyNG. Mini Sherpa Extruder. Bambu Hot End. 4010 Blower Fans.

Downloads
198
Likes
26
Rating
0
P
Printablesnohkumado

BipAndGoSupport for TRP 4010

A Support for the v3 bip&go highway badge Print Settings Printer: Scalar XL premium Rafts: No Supports: No Resolution: 0,2 Infill: 10% Filament: Amazo pla white Notes: i had to print the thing 8 times before getting a usable model, would…

Downloads
197
Likes
8
Rating
0
P
PrintablesColdat

V400 4010 fanduct

Check that lines are wide enough to avoid holes and cracks, cause walls are really thin :) Nice to combine with 5015 holder listed here.

Downloads
195
Likes
15
Rating
4
P
PrintablesRazzy

Ender 3 S1 Sprite Extruder 4010 Hotend Fan Adapter

A separate adapter to use the original 4010-part cooling fan to cool the hotend! Compatible with model 359910 Zero Y-offset CR Touch mount and many replacement parts cooling ducts including the Taurus V4. Recommended printing in PETG or…

Downloads
192
Likes
42
Rating
4.5
P
PrintablesPsych0h3ad

4010 Fan guard VzBot edition

https://github.com/VzBoT3D/VzBoT-Vz330

Downloads
191
Likes
13
Rating
5
P
PrintablesHrumque

5015 blower adapter to 4010 4020 fan mount

This is a simple fan adapter, that allows you to mount the blower 5015 in place of the standard fan 4010 4020 etc, without significantly increasing the thickness of the entire object. For example, as an airflow in front of an extruder At…

Downloads
190
Likes
35
Rating
4