IKEA SAMLA box clips 45L/65L
For the Samla boxes from IKEA clips that have a different Fit dependend on how you would like it ;-) Best configuration to print is like shown in the 3mf file. I printed in PETG.
- Downloads
- 603
- Likes
- 35
- Rating
- 4.8
Counting matching models…
For the Samla boxes from IKEA clips that have a different Fit dependend on how you would like it ;-) Best configuration to print is like shown in the 3mf file. I printed in PETG.
This model went thru several iterations to offer a perfect fit, a print without support, a fast printing time and a fit that allows easily installing the clips and stacking the boxes. You may also place the clip over the reinforcers…
Similar to: https://www.prusaprinters.org/prints/49070-samla-hanga-modified-version but not totally the same. This one are for the 45L Samla box. Print one plan (it already contain the two holder, ready to print) and buy a 40mm diameter…
This is a remodel from MortalWombat's Better Ammo Boxes! He's got really great designs for Ammo Boxes for Calibers he has on hand. Unfortunately, he didn't have a 45 Long Colt so I took his 45ACP ammo box and scaled it up to 125% for the…
I needed a drybox for my XL 5H, that I can directly print out of. I found the “SmartStore Classic 45L” container from Orthex in my local hardware store (Bauhaus) and it matched the dimensions to hold 5 spools side by side. I designed this…
Summary Are you tired of searching your clips for your airtight Samla box once opened? You like the simplicity of print-in-place parts? Then this Samla clip is for you. The only thing you need are some drops of glue to fix the clips.…
Summary Smart Dry Box designed for the Ikea Samla 45l box. It supports 6 spools, each buffered by a fully enclosed wheel buffer utilizing the complete box height. Spools, Buffers and Desiccant containers all can easily be loaded from the…
Reupload of Beaver Works 's great work that he uploaded to MakerWorld The official Snapmaker top cover costs a whopping $249 ... and my wallet simply did not approve of that purchase. So, I had to take matters into my own hands and create…
I needed this great design from Canislupus for a 22l samla box, so I recreate a clean fusion 360 file based on his v1 for sharing and allowing easy further modifications. Two models are proposed 11-22l samla box clip v1 Tested with 11l…
The community has created some incredible, creative solutions for the Snapmaker U1 enclosure. However, most are quite bulky and require significant time and material. Born out of a need to finish a project with a nearly empty roll of…
I was looking for clips to secure the lids on some of my IKEA Samla boxes and came across many, including this one by Canislupus . I really liked the idea of the design but there were a couple of things I wanted to change so I remodelled…
llaveros discos de 45lb 20.4kg y star gym para gimnasio
A coaster modeled after a Rogue cast iron Standard Barbell 45lb Olympic weight plate. The original idea was to fill in with resin to create a flat top surface. I ran into issues slicing the original coaster, so I extended the lettering…
IKEA samla clip lock for 45L/65L boxes. I didn't like the original design of the clip locks for samla boxes so I modified it slightly. Now it is flat on top and is easier to unlock.
This is a .45 long colt ammo box. Perfect for store my reloads in. Category: 3D Printing
Decided to make top cover using IKEA Samla 45L while waiting for the original topcover to arrive since my PETG prints keep lifting off bed and warping. I really liked the original with its more compact appearance but didn't like the…
A simplified version of the Filament Dry Box by Pixelwave and Michal K. I only needed the boxes to store the filament, so I adapted the base towers by Michael K to fit 14mm wooden rods. To be able to use the system in a 45L Samlabox, I…
This remix is based on another remix that adds the means to slide the SAMLA box backwards to allow for venting when printing PLA. I have added a small coating of TPU (3 layers) for a smother finish that makes sliding smoother.…
made for IKEA SAMLA 45l box hole spacing on the casters: 35x28 using M4 hardware print file 2 normal and 2 mirrord
Picatinny/1913 rail sidesaddle holder for 5x .45LC or .410 Shotshells. Designed for the Rossi Brawler, but should work with any rail-equipped firearm in .410 or .45LC. Print 1x of this model, and 1x “smallside” from the original. 1x M3…
A quick remix for the 45L box, but with a bit more play in it for those using foam door seal on the edge of the box as suggested by Tom Sanladerer.
I think the IKEA SAMLA will be my permanent enclosure, so I wanted to pimp it. Don't see why I'd spend $130 on more or less the same OEM enclosure The IKEA SAMLA 45L is the go-to budget lid for the U1. Five bucks at IKEA, print parts,…
This is a source-level (OpenSCAD) reinterpretation of this model on thingiverse: https://www.thingiverse.com/thing:1696649 The original model worked but used in-place printed hinge pins that were prone to failure. This recreation has a…
This is a replacement for the battery cap on a Ryobi HP45LVN electric screwdriver. The original on mine broke when I dropped the screwdriver earlier this week. I printed mine on a MK3S+ on the Prusament PLA 0.20mm Quality setting in…
Introducing a convenient screw-less spool holder designed specifically for the Samla 45L box. Eliminates the need for any drilling or creating holes. Designed to effortlessly fit in a pipe of up to 18mm. Print with PLA or PETG
Some silica desiccant containers that I made for in the IKEA Samla 45L box. Maybe others will find this useful as well. Each container hold about 120 grams of desiccant Has a mounting point for the round hygrometer so you can keep an eye…
Ein optimierter remix der Ikea Samla Deckel Clips. Ich habe ihn auf ca. die Hälfte gekürzt, aber so, das die Scharniere sinnvoll für maximale Stabilität geteilt sind. Gedruckt mit Amazon Basics PETG. Das Filament sollte kalibriert sein,…
A huge thank you to Just Baselmans for providing the STEP file, which made this remix possible! I’ve modified the right side of the original design to integrate a USB port. This modification is flexible depending on what you have on hand:…
This is an under-desk mount made to fit the IKEA Samla (modelled after the 45L box) which I use to hang my filament drybox as can be seen in the pictures. The mount was designed to be specifically compatible with their ALEX desk ( this…
45L IKEA Samla Filament Drybox This drybox is built from a 45L IKEA Samla container and designed to keep 3D printing filament dry and ready for use. Two 8mm threaded rods serve as spool holders, providing stable support for multiple…
Socket for samla drybox to hold box on specific place on the enclosure
Constructing these I/T beams can be tricky as sometimes lumber is warped a little bit. These jigs can be used to ensure the beams are always in the right place as you construct them. Instructions for using this jig: Fit the boards into…
Refer to the original for any info
Wider clips for more tension and to better hold the box lid.
Remix of https://www.printables.com/model/116955-filament-dry-box-4x-ikea-samla-22l , but adapted for use in 45L boxes. This also allows for holding five 1kg spools. Use all files and instructions from the original design except for the…
Pour ne pas jeter un panier à linge (marque Rubbermaid en 45 L réf 5015) beaucoup utilisé, voici quelques pièces de réparation et renforcement : Pièce d'angle. Tige pour longueur afin de consolider le panier à linge. Poignée de…
This is designed to allow a standard modular grow tower to attach to a heavy duty tote bin.
Habe für mich diese Adapterplatten gemacht für meine Ikea Samla 45l Box und passenden Gridfinity platten aus dem Generator. https://gridfinitygenerator.com/de/ Diese sind auf 42mm eingestellt für die Boxen. In den Druckdatein sind 2 stück…
For the filament storage/dry box you will need an IKEA SAMLA (45l/12 Gallon) box, a wooden broomstick and 16 small woodscrews (2 nails are optional). If you just want to store and dry a few rolls of filament, you can just print 4 endcaps…
j'ai rendu mes boites IKEA smala avec un joint silicone déposé au pistolet dans le couvercle. L'assemblage étant plus épais, j'ai adapté les clips. Imprimé en PTEG, remplissage 100%. J'utilise 8 clip pour les smala 22L, 10 clips pour les…
I absolutely hated that the bottom of the case was not covered by any light because of the GPU. I used some MagFlex Lite because I Those strips and splitter Some double sticky tape (I used that one , it may be the only use it has…
Convenient screw-less spool holder designed specifically for the Samla 45L box.
Remix of @RenMcCourtey drybox modified for Ikea Samla 45L storage box
This is a simple trash can stop that fits into the bottom of the Target Brightroom 45L Rectangular trash can. It is designed to hit against the floor trim so that the lid of the trash can does not hit against the wall. This was designed…
I wanted to put wheels on my 45L SAMLA, and after trying different wheel and base plate options from others, none fit perfectly. I also had 4 wheels from an IKEA VARDÖ unit, so I made these base plates which fit neatly into the corner leg…
Feet for the 45 litre Ikea Samla box. Easier to slide a heavy box across the floor. They fit inside the existing feet and they aren't tight; I left room to attach with double-sided tape.
Rack for IKEA 45L SAMLA bins. Each rack fits 10 rolls of filament (e.g. Creality, Bambu or Prusa). My 123-3D rolls are just a bit too wide to fit 5 in a row. For the full storage solution you'll need 4 pieces of 8mm dowels. (or similar…
I didnt need the sensor holder for my application so i removed it
When I'm meal prepping, I use the small scale on the 2-in-1 scale from Albert Heijn. What's really annoying is that it isn't secured and weighing is therefore inaccurate when it slides away and pushes against the scale next to it. I…
Snap-on face plate for the TR-45L Skinny QRP ham radio. It has a large area for customizing with your own text.
Description The front feet of my Samsung DV90DG6845LKU5 dryer can’t be screwed out far enough to level it, so I designed this simple riser. The adjustable foot sits inside the rim [and is centered by the pin / and the pin goes into the…
Holder for neon strips based on the original by Michael Samblanet.
Picatinny/1913 rail sidesaddle holder for 5x .45LC or .410 Shotshells. Designed for the Rossi Brawler, but should work with any rail-equipped firearm in .410 or .45LC. Print 1x of this model, and 1x “smallside” from the original. 1x M3…
Reupload of Beaver Works 's great work that he uploaded to MakerWorld The official Snapmaker top cover costs a whopping $249 ... and my wallet simply did not approve of that purchase. So, I had to take matters into my own hands and create…
This is a simple trash can stop that fits into the bottom of the Target Brightroom 45L Rectangular trash can. It is designed to hit against the floor trim so that the lid of the trash can does not hit against the wall. This was designed…
When I'm meal prepping, I use the small scale on the 2-in-1 scale from Albert Heijn. What's really annoying is that it isn't secured and weighing is therefore inaccurate when it slides away and pushes against the scale next to it. I…
Introducing a convenient screw-less spool holder designed specifically for the Samla 45L box. Eliminates the need for any drilling or creating holes. Designed to effortlessly fit in a pipe of up to 18mm. Print with PLA or PETG