Search results: 4oz

Sort order

128 models

P
Printablesquickvibes

Spice rack for 4oz square spice jars

small 3x4 spice rack for cupboard organization. Uses 4oz square spice jars https://www.amazon.ca/gp/product/B077T2252Y/ref=ppx_yo_dt_b_asin_title_o01_s01?ie=UTF8&psc=1 Print instructions PLA works fine pirnt at .30mm for quicker print.…

Downloads
622
Likes
112
Rating
5
P
Printablesnotcolin

14oz Yeti Rambler - Car Cup Holder Adapter

Here’s a quick model for a 14oz Yeti Rambler mug (approximately 100mm diameter at the base). I couldn’t find one that worked for my needs, so I designed this to fit nicely in the 2024 Ford Escape cupholders. The model is based on the…

Downloads
496
Likes
40
Rating
5
P
PrintablesDJMac

Hydro Flask TPU Boot (64oz 40oz and 32oz sizes)

Here's a a few simple boots for 64oz, 32-40oz and 12-20oz Hydro Flasks. There is also a version for the narrow top Hydro Flask and the Tumbler Hydro Flask . Please note, this MUST be printed in TPU to fit as rigid filaments will not work.…

Downloads
446
Likes
78
Rating
5
P
PrintablesSkyla157

4oz (118ml) Medicine Syringe Holder

This is a remix to accommodate the larger size bottle (4 fl oz, 118 ml). Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: Eryone PETG White Category: Household

Downloads
320
Likes
29
Rating
5
P
PrintablesDznutz

TAL Water bottle Lid (Ranger 18, 40 and 64oz)

This is a TAL Ranger lid, it fits the 18, 40 and 64oz bottles, it is designed to use the o-ring that is in the original lid. 2 models will be uploaded, one I added ribs and a D-ring hole to hook to something and the other is smooth with…

Downloads
247
Likes
12
Rating
5
P
PrintablesTheChongus

Universal Yeti 14oz Cupholder Adapter

Designed this adapter for my Yeti Rambler mug because I was tired of not having anywhere to put it in my car. Should fit most cupholders, and the hole in the middle allows for some cans to still use the cupholder. Print in ABS or PETG so…

Downloads
215
Likes
49
Rating
5
P
PrintablesLethargicPuffin

14oz Stanley Tumbler Handle

We got a 14oz Stanley tumbler for my daughter for Christmas (so she could be like her big sister) but knowing how clumsy all 5 year olds are we decided it needed a handle. We didn't want to pay the $15 for the only version we found on…

Downloads
207
Likes
30
Rating
0
P
Printablesalejosma

Owala 24Oz bottle boot

Bottle boot designed for 24Oz Owala FreeSip bottle. 2 available heights. Printed with overture clear TPU on Bambulab P1s. Very tight tolerance so that the bottle boot does not fall off. The model also includes a hole at the bottom to…

Downloads
201
Likes
15
Rating
5
P
PrintablesJ3D_Designs

Multiboard Super Lube 4oz Holder

Multiboard Push-Fit Super Lube 22oz (41.5mm) Holder.

Downloads
189
Likes
24
Rating
5
P
PrintablesQuietMike

YETI Dog Bowl Riser Stand 64oz 66oz

YETI Dog Bowl Riser Stand for 64oz or 66oz bowls Raises bowl about 230mm at bottom, model itself is 250mm tall print upside down, only needs supports for the indented part where the bowl will go Included is a piece that allows 2 stands to…

Downloads
174
Likes
14
Rating
0
P
PrintablesWW Tech.

Blackstone Bottle Holder (14oz/400ml)

Needed Supplies: (1) Screw Driver or Allen Key (1) M6x12 or M6x20 Screw

Downloads
145
Likes
36
Rating
5
P
PrintablesKaleigh Bennett

Plaster mold for 4oz cups

Simple 4 oz cup. I use them for espresso. Easily stackable. Used dish soap to release mold, but still more of a one-off mold, may work better with mold release or cooking oil spray.

Downloads
132
Likes
36
Rating
0
P
PrintablesSeth Overbeek

Gridfinity One, Two, and Three Loctite 34oz

One, two, and three 34oz Loctite bottle holder. I cleaned up file a little bit. I was very new to CAD when first drawn. It is 4 mm taller. I also still included the model with the lip. Please post your makes and let me know how it worked…

Downloads
127
Likes
15
Rating
5
P
PrintablesMarkNguyen

Owala Water Bottle Boot 24oz - 3D Scanned

Protect your 24oz Owala bottle with a perfectly fitting boot , created from a 3D scan. Its tight design ensures it stays securely in place . Start with a 99% scale for a snug press fit, and fine-tune for your 3D Printer and/or material.…

Downloads
126
Likes
10
Rating
5
P
PrintablesDeadly Dean

Yeti Drink Bottle Holder 64oz

Yeti drink bottle holder for the 64oz. Holder can bolt to a 55mm post

Downloads
126
Likes
18
Rating
0
P
Printablessunshine

Cupholder Adapter Takeya 64oz Waterbottle

Cupholder adapter for 64oz Takeya steel waterbottle 1 piece print with no supports Printed in PETG since it will be used in a hot car Dimensions: Section that goes into cupholder: h=2.500in, d_outer=3.180in Section that waterbottle slides…

Downloads
117
Likes
8
Rating
0
P
PrintablesSamuel Shartzer

Yeti 14oz Mug Car Cup Holder Adapter

Was originally designed for a late model Honda Ridgeline/Pilot. However it seems to fit others great. Currently using in a Jeep Grand Cherokee. I do not recommend PLA since it will warp on hot days in the car. PETG has held up great for…

Downloads
115
Likes
15
Rating
0
P
Printablesbatman

Owala FreeSip 24oz adapter for 5th gen Honda Odyssey (2018)

The 24oz Owala FreeSip claims compatibility with “most” cupholders; my van apparently doesn't fit the definition of “most”. If you also have a 2018 (or possibly any 5th gen) Honda Odyssey and don't want to just put your FreeSip in…

Downloads
107
Likes
14
Rating
5
P
PrintablesmozWORLD

Upcycled 2 or 1.89 (64oz) Liter Bottle Or Wide Mouth Ball Jar Birdfeeder

Feed wild birds with this bird feeder that attaches to a 2 or 1.89 (64oz) liter bottle. rivet a chain to a bottle for a secure hold. I also attached a 2 and 1.89 liter bottle funnel. Use no top or bottom layers and a high infill (75%+) to…

Downloads
107
Likes
24
Rating
0
P
PrintablesGreg Buxton

Ozark Trail 24oz Adapter for EufyMake E1 Rotary

Jig/assembly/adaptor to allow you to print on a 24oz Ozark Trail bottle using the rotary bed on the Eufymake E1 UV printer.

Downloads
106
Likes
12
Rating
0
P
PrintablesRyan Shill

Lid Plug for Vitamix 64oz High Profile Container

I recommend hand washing only for this part. I printed mine in ASA, but there may be some higher temp filaments that could survive the dishwasher.

Downloads
105
Likes
7
Rating
5
P
PrintablesDIY Brad

Gridfinity Elmer's Glue 4oz Bottle Holder

A quick and dirty remix of TezlaKoilz vertical 4oz glue holder to fit on a 2x1 Gridfinity base

Downloads
105
Likes
10
Rating
4
P
Printablescoop

Owala Boot 24oz TPU

It's a boot to protect the bottom of your 24oz Owala bottle. I printed it in TPU with a .6mm nozzle. 4 bottom layers, 3 walls, 0 top layers, 0% infill. If your running .4mm nozzle I would try 5 walls or making the diameter slightly…

Downloads
105
Likes
11
Rating
0
P
PrintablesHobo4ssassin

TAL 64oz Water Bottle Handle

Reinforced replacement handle for TAL 64oz water bottles

Downloads
102
Likes
9
Rating
5
P
PrintablesBrett Casteel

Bobbins for Spinolution Pollywog Spinning wheel 4oz and 12oz

This print fill will create two sizes of flat pack bobbin for Spinoloution yarn spinning wheels. Flat pack bobbins are easier to store for travel as they can be disassembled into 3 pieces. When printing you can chose what size to print…

Downloads
102
Likes
32
Rating
0
P
PrintablesMiniFlow

Halloween viral Butter Clicker 4oz Butter Model

⚡ CLICKFLOW – IMPORTANT INFO 🔧 Assembly Note: This model was tested using a blue mechanical keyboard switch . For a more secure and durable assembly, I recommend using a small amount of glue on the connecting parts to keep everything…

Downloads
95
Likes
10
Rating
0
P
PrintablesAlan G

US Military 4oz D Ration

The 4oz D Ration was the primary US survival ration during and post World War 2. It was produced from 1937 to 1946. This model is designed to be used in museums and displays at it has accurate dimensions and silhouette.

Downloads
94
Likes
9
Rating
5
P
PrintablesTimboSlice

Yeti 14oz mug Holder

A quick model for the 14oz yeti mug and a phone holder that can be used to fit onto any t-slot rail. I used ¼-20x ½" socket caps, although the socket caps stick up slightly but no damage was done to my yeti. The phone holder has drain…

Downloads
89
Likes
20
Rating
0
P
PrintablesTesla Knits

4oz Ashford Spinning Wheel Bobbin

This is a spinning wheel bobbin designed for use on an Ashford Joy wheel, but it fits any Ashford spinning wheel that uses their standard bobbin. This design is for your everyday spindle. It still holds more than the wood ashford bobbins,…

Downloads
80
Likes
19
Rating
0
P
PrintablesCalciumCortex

64oz Ball Mason Jar Kratky Shield and Lid

The original model did not work with a 1.9L/64oz Mason jar. This fits snug, so it won't slide off. Print body in vase mode

Downloads
79
Likes
12
Rating
0
P
PrintablesVinnestTree

64oz Hydro Flask Boot

Protective boot for a 64oz Hydro Flask. Print with 10% infil gyroid. Print instructions Category: Household Summary Protective boot for a 64oz Hydro Flask. Print with 10% infil gyroid. Print Settings Printer Brand: Creality Printer: Ender…

Downloads
79
Likes
7
Rating
0
P
PrintablesNathan F.

Bicycle Mount for 24oz Owala Bottle

This is a bottle cage designed to accept the 24-ounce Owala bottle. The Owala bottle is extremely heavy, lacks any ridges to retain it by, is very tall compared to a typical sports bottle, and it needs extra vertical space in order to be…

Downloads
78
Likes
13
Rating
5
P
PrintablesDJMac

64oz Hydroflask Handle and Rings

Rings print with no supports. Handle can print without on a dialed in printer, however, adding supports only means you need a little clean up if you want that assurance of no dangle strings. Multiple sizes available to accommodate slight…

Downloads
78
Likes
18
Rating
5
P
PrintablesLOStheNERD

Tesla Model 3 cup holder adapter for XPAC 64oz tumbler

Cup holder adapter to fit the large XPAC 64oz insulated tumbler in a Model 3 cup holder.

Downloads
77
Likes
11
Rating
0
P
PrintablesCraryR

TAL 64oz bottle cup holder

The base of the extension is measured off the large cup holder in a 2001 Jeep Grand Cherokee.

Downloads
75
Likes
9
Rating
5
P
PrintablesWyattGorman

Takeya Water Bottle Protector Sleeve (24oz)

Lost the protective sleeve for my Takeya 24oz water bottle, so I modeled a new one to print in TPU. It works great! Printed in TPU 95a with 4 walls and 25% infill so the padded bottom has some give but not too much.

Downloads
71
Likes
10
Rating
5

Iron Flask Vacuum Bottle Protective Boot - 14oz 18oz 22oz

Sleeve to protect the bottom of the bottle from scratches. Print in flex filament, I used old Sainsmart TPU I had on hand. This fits the 14, 18, and 22oz bottles, larger ones have a bigger circumference and will not fit. Print…

Downloads
67
Likes
9
Rating
5
P
Printableshulkbuild

O-ring seal for TAL Ranger Pro lid (18, 40 & 64oz.)

I designed this o-ring to be printed out of TPU and tucked into this lid designed for the TAL ranger pro by Dznutz. It should also work with the original lid.

Downloads
65
Likes
6
Rating
0
P
Printablesdanec

Fruit Fly Trap Lid for 4oz Ball Jar

• Material: Printed using ASA filament for enhanced durability and dishwasher safety. • Print Settings: Utilized a 0.4mm nozzle with a 0.2mm layer height for optimal print quality.

Downloads
62
Likes
7
Rating
5
P
PrintablesDD

64oz Yeti Rambler Bottom

This is just a simple shroud for a large yeti water bottle. it can be make in either TPU or PLA but we got better results with the PLA but that could be due to my quality of TPU (amazon basics...) UPDATE: tightened the tolerance of the…

Downloads
62
Likes
14
Rating
0
P
PrintablesTimmy Turner

Baby Bottle Holders (Dr. Brown's 4oz, 8oz & Breastflow 6oz)

I've created a few different bottle holders for my daughter's bottles and a friend's baby bottles. As you can see from the picture, I customized the design with her name, it's fairly easy to do in Tinkercad. Breastflow 6oz bottle has a…

Downloads
61
Likes
16
Rating
0
P
PrintablesTrukku

Gordon Choice 4oz Portion Cup and Lid Caddy

These cups from GFS come in long flappy sleeves that are a bit unwieldly to deal with, especially since it usually takes us a few years to get through them. This caddy keeps them constrained and out of the way without scattering…

Downloads
60
Likes
7
Rating
4
P
Printablesvidision

TPU Can Lid (⌀74mm, ~14oz cans)

Quick draft to try out the idea. The opening is very slightly flared internally to grip the lip of the can. I printed in TPU 95A with 0.28 layers and it fits just right. We're using several of these now, and I found 101% scale works even…

Downloads
58
Likes
4
Rating
0
P
Printablesmmasse

Yeti Rambler 14oz TPU Sleeve / Bottom

I printed this with Amazon basics TPU. https://www.amazon.ca/gp/product/B07H9KNPNL/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 Printed with supports everywhere (even though they are a pain to get off) This STL will need supports for…

Downloads
56
Likes
16
Rating
5
P
PrintablesTosh Taylor

Snapmaker Rotary Adapter - 30oz Tumbler, 14oz Coffee Mug

Modified 20oz Rambler Holder by theihdes to support 30oz tumblers and 14oz coffee mugs on the Snapmaker rotary module Category: 3D Printer Accessories

Downloads
56
Likes
4
Rating
0
P
PrintablesAndrew Perry

Double Owala Organizer, Drying Rack (24oz)

This is a drying rack for 2 Owala bottles. If you are like me, your wife and daughter can't live without their new water bottles. But they have to be cleaned and dried. Well, that's my job. I usually create a Tetris tower of drying…

Downloads
55
Likes
27
Rating
0
P
Printablespngu
Downloads
52
Likes
1
Rating
0
P
PrintablesWhimsii3D

Modular Tool Rail 4oz Ball Peen Hammer Holder

Simple remix to allow you to add a small 4oz ball peen hammer to your Modular Tool Rail. I believe that I used the deburring tool holder as the basis for this remix.

Downloads
52
Likes
5
Rating
0
P
PrintablesZeke

64oz Cup Holder / junk tray for 2012 Audi A3 8P

This is an extremely large print for (2012) Audi A3 owners (maybe other Audi's as well) to drop into the two-stage cup holder size we have. 207.50mm (X) × 200mm (Y) × 217.40mm (Z). It's off-center 7.5mm to move it slightly toward the…

Downloads
49
Likes
5
Rating
0
P
PrintablesRadBench

Liquitex 4oz Paint Cradle

Holder for paint and paint brushes. The main holder fits 4oz liquitex tubes. The multi-size should fit the smaller tubes but I didn't have any on-hand to test it out. I glued the handle onto the base with 5-min epoxy.

Downloads
48
Likes
12
Rating
4
P
Printablesarcenik

Dr. Brown's 4oz Bottle Caddy

I created this model to better help with bottle storage in the fridge (especially if you need to keep track of the order to use them in). Will hold 4 of the 4oz (small) bottles. I printed in PETG but this could really be printed in PLA…

Downloads
46
Likes
11
Rating
0
P
Printablescwills11

Baby bottle dryer for 4oz bottle

small stand for drying baby bottles. Pla works fine I printed this at .28

Downloads
45
Likes
8
Rating
0
P
Printables3D-Academy

Cup&Cino Becherhalter / Paper Cupholder 20oz - 590ml /12oz - 300ml /4oz - 120ml

Cup&Cino Becherhalter Paper Cupholder 20oz - 590ml 12oz - 300ml 4oz - 120ml

Downloads
45
Likes
6
Rating
0
P
PrintablesSailorJerry

Jeep Wrangler JL/JLU 64oz Hydro Flask Cupholder Insert

A cupholder solution for your 64oz Hydro Flask in a Jeep Wrangler JL/JLU! A 64oz Hydro Flask doesn't fit into either of the the cupholder compartments of a Jeep Wrangler JL/JLU due to the water bottle's enormous 4.72in diameter. Unlike…

Downloads
44
Likes
8
Rating
0

4oz. burger press

This PETG burger press is designed to help you achieve restaurant-quality results at home. Accommodates 4oz of ground 80/20 ground beef Key Features & Benefits Anti-Bulge Technology: The press features an optional bottom dome on the base…

Downloads
44
Likes
11
Rating
0
P
PrintablesGhostguy6

Createx 4oz Bottle Holders for the Honeycomb Wall System

Createx 4oz or (43mm diameter) bottle holders for the Honeycomb Wall System. Each rack will hold 4 bottles. and has 3 wall attachments to prevent sagging if loaded with heavy paints. Print in the orientation provided with at least 4…

Downloads
44
Likes
9
Rating
0
P
PrintablesAgent Skwerl

24oz Mug for shaving or drinking

This is one of those projects that started off as a modeling exercise and turned into something usable. This mug holds about 3.25 cups of liquid, although 24oz is probably as close as you can get if you figure in ice, etc. When printed at…

Downloads
44
Likes
4
Rating
0
P
Printablesniriwurx

BRUMATE 12oz to 8.4oz Mini Can Adapter

BRUMATE 12oz to 8.4oz Mini Can Adapter This little adapter allows you to enjoy your mini cans in your BRUMATE . (Amazon Affiliate Link, Thank you!) Especially works well with the little Alani energy cans :) 8.4oz slim cans ~250ml Enjoy!

Downloads
43
Likes
8
Rating
0
P
Printablesbonzai000

14oz yeti rambler lid plug

Remixed from https://www.thingiverse.com/thing:4600530 This plug fits the drinking hole in the 16oz Yeti Rambler cup. GF Complained of the cup sloshing tea all over her car, so this is the easy solution. Works well! Print Settings Printer…

Downloads
43
Likes
5
Rating
0
P
PrintablesJordan

Yeti Rambler Car Adapter (14oz)

14oz yeti ramble car cup holder adapter for my 2018 ford fusion

Downloads
43
Likes
8
Rating
0
P
PrintablesChris NZ

US Military 4oz D Ration With bite taken

Creating a bar for a museum display, wanted one with a bite taken, original design by Alan G

Downloads
42
Likes
8
Rating
5
P
PrintablesLuckyHearth3D

Slim Screwdriver Handle 8.4oz Can Cup

Who needs a handle? It IS a handle! Introducing the Slim Screwdriver Handle 8.4oz Can Cup; A Remix of Blank Can Cup RETURNS! by MandicReally . Designed to hold slim 8.4oz cans. If you like this model, please give it a like and be sure to…

Downloads
40
Likes
16
Rating
1
P
Printablesdubprints

Hydroflask 24oz boot

I dropped my full 24oz hydroflask and damaged the base enough that it would not sit flat on any surface. It was like a weeble-wobble. After adding the boot, the bottle is stable again. I printed this out of Eryone 95A TPU on a MK4S using…

Downloads
38
Likes
3
Rating
4
P
PrintablesPeter Welch

Hydro Flask 24oz Bottle Bumpers – Top & Bottom

Keep your Hydro Flask 24oz bottle safe with these durable TPU bumpers designed for the top and bottom sections. They protect against scuffs, scratches, and dents while maintaining a sleek look. Features: Custom fit for Hydro Flask 24oz.…

Downloads
37
Likes
4
Rating
0
P
PrintablesBillD

Aquaphor 14oz Lid

If you have kids with eczema you probably have this stuff in the med cabinet. A little bit goes a long way but the kids eventually drop it and the lid breaks, so make yourself a new lid on the cheap..

Downloads
35
Likes
4
Rating
0
P
PrintablesDD

64oz Yeti Rambler Top cover

For the top of the Yeti its a mostly snug fit. (Yeti Bottom in Blue also in Pic)

Downloads
35
Likes
11
Rating
0
P
PrintablesJames

No Tip Stand for Fiebings 4oz Dyes, Coatings, Etc.

There are several of these out and about but none fit my needs so I designed this one. I wanted something with a wide base to prevent tip over and catch drips. I wanted the bottle to slide in and out easily. Most importantly, since I…

Downloads
32
Likes
12
Rating
0
P
PrintablesScoobyDoo27

Dr. Brown's 4oz/120ml Narrow Baby Bottle Holder

Use this holder for the Dr. Brown's narrow glass baby bottles. It works great if you want to use the glass bottles for pumping breast milk without the bottles falling over when setting them down.

Downloads
30
Likes
5
Rating
0
P
PrintablesJakob

Skoda Fabia Mk2 YETI Rambler 14oz (414 ml) cup holder

A simple holder for the YETI Rambler 14oz version. Fits in the middle of the cup holder of the Skoda Fabia Mk2 (2007-2014). Print instructions: Lay flat upside down (big side down) Has to be printed with supports Settings: 0.15mm PETG…

Downloads
28
Likes
3
Rating
0

Replacement Handle for 64oz Adventuridge / TAL / ALDI / Amazon Stainless Steel Insulated Growler

Did you break the handle on that great 64oz growler / water bottle you got at ALDI or maybe on Amazon? Use this model to print a replacement. The handle is attached to the growler's lid with a metal pin you can poke and pull out using a…

Downloads
27
Likes
1
Rating
0
P
PrintablesTopher

Bracket for 1" Round Bar- Yeti 14oz Cup Holder Adapter

This model is pretty user specific and it was designed to work with the Yeti 14oz Rambler cup holder adapter linked here. The Bracket clamps around any 1" diameter pipe with a bolt and nut. This part got me through my Achilles tear…

Downloads
26
Likes
5
Rating
0
P
PrintablesJarvin Potter

Ninja Creami Deluxe (24oz) Lid

Lid for large (24oz) Ninja Creami. Recommend printing using flexible filament such as PLA or TPE. After having printed a couple of these I don't think it needs to be as thick as I have made the side. Find solid model attached if you would…

Downloads
26
Likes
3
Rating
0
P
PrintablesJason Tallman

Large Water Bottle Car Adapter 64oz

Large Water Bottle Car Adapter 64oz

Downloads
25
Likes
1
Rating
0
P
PrintablesJosef S

Hydro Flask Holder 24oz

Simple holder for HydroFlask. My bottle is often on the floor next to the work table. So that the bottle does not fall over so quickly when you accidentally nudge it, I have printed out this holder. Inner diamater 73mm. Printing : I…

Downloads
25
Likes
3
Rating
0
P
PrintablesElderMillennial

Iron Flask 64oz 125mm TPU Boot

A boot for the 64oz Iron Flask, 125mm ID, printed in Bambu TPU 95A HF. Printed with 3 walls and 15% hexagon infill. Prints fast, uses little TPU, works like a charm and fits perfectly.

Downloads
24
Likes
3
Rating
0
P
PrintablesMr.Red

Ender 3 V2 - 0.24OZ Glue Stick Holder

V-Slot 0.24OZ Glue Stick Holder.

Downloads
22
Likes
2
Rating
0
P
PrintablesBrandon Derry

Mason jar funnel for 24oz jar

Mason jar funnel for 24oz jar

Downloads
22
Likes
6
Rating
0
P
Printablesprinthead0507

Owala 24oz bottle boot

Leak-proof bottle boot that is for a 24 oz bottle great part or upgrade for your bottle.

Downloads
22
Likes
2
Rating
0
P
PrintablesRoc

64oz Cafezi Water Bottle Boot

Boot made for Cafezi 64oz water bottle Printed in TPU

Downloads
22
Likes
3
Rating
0
P
PrintablesCharles Kidwell

14oz YETI Rambler rubber bottom

A simple TPU bottom for a 14oz YETI rambler. I didn't like the clanging noise the cup made when setting it on a stone countertop. It also makes the cup not slide as easy on smooth surfaces. Necessary, absolutely not, but it scratches an…

Downloads
21
Likes
4
Rating
0

Owala FreeSip 24oz water bottle handle

I messed up the measurements in Solidworks by a factor 10. So import this model in your 3D-slicer and resize to 10% . Once resized, you might want to add supports for the hand/carabiner hold . I haven't tried printing without. I designed…

Downloads
20
Likes
7
Rating
0
P
PrintablesDgs5047

Subaru Forester Cup Holder Adaptor for 24oz Bubba

I got frustrated with how poorly my 24oz Bubba coffee mug fit in my wife's car so I designed an adaptor. Hers is a 2018 Forester but it probably works for 2014-2018 model years and possibly other Subaru vehicles. Support structure…

Downloads
20
Likes
3
Rating
0

Carabiner attachment for 24oz Thermos insulated jar

Uses the existing indentation to fashion a band that has a hole to attach things to it. Secured with M3 socket cap bolt and nut. Attaches to: THERMOS Stainless King Vacuum-Insulated Food Jar, 24 Ounce, Army Green

Downloads
20
Likes
4
Rating
0
P
Printablesmyxfit

Slime mold feeding capsule for 4oz deli cup

A suspended capsule that fits in a 4oz deli cup, with very small gaps that allows slime mold to escape. This is useful for providing slime mold to small invertebrates that eat it. You put some slime-covered oats in the capsule, screw on…

Downloads
18
Likes
3
Rating
0
P
PrintablesKat

4oz. Glue Bottle Organizer

Model is 10in (254mm) x 7in (177.80mm) with a depth of 20mm. The model can hold 12 4oz bottles of craft glue. The model shown was printed with: Generic PLA 10-15% infill no supports no brim This is a great model for teachers and crafters…

Downloads
17
Likes
12
Rating
0
P
PrintablesAbnormAnomaly

Desk Holder for 24oz Stanley Coffee Mug

Made to hold a 24oz Stanley Coffee Mug off the side of your desk. It can mount to a desk top up to a 40 mm thick. The bolt is also very deep. My desk sits on a metal frame so it's difficult to mount things to the side so the bolt starts…

Downloads
16
Likes
3
Rating
0
P
PrintablesEesa Abdulraouf

Boot for Hydroflask 24oz

Printed in TPU using a Bambu Lab P1P. Supports needed for design.

Downloads
16
Likes
1
Rating
0
P
PrintablesBobCo101

Tervis Tumbler 24oz Lid Holder

I have a narrow cabinet above the Keurig coffee maker just for tumblers. To keep things organized, I designed a simple two-part print that mounts right onto the cabinet door — it’s perfect for stashing Tervis brand 24-oz lids out of the…

Downloads
15
Likes
1
Rating
0
P
PrintablesAlan's Designs

RedBull Koozie - 8.4oz

This is a koozie for 8.4oz redbull cans that is meant to be printed in TPU or any flexible. I used Siraya Roamr TPU Air 80A, and printed at 260C for maximum foaming

Downloads
15
Likes
0
Rating
0
P
Printablesjasondilts

Aero pod mason jar adapter 64oz

A simple adapter to use an Aerogarden pod in a 64oz Mason jar.

Downloads
15
Likes
5
Rating
0
P
PrintablesMikiCab

Handle for 24oz Thermos

Thermos 24oz handle. Printed with ASA. Still figuring out what the best angle to print this at. I printed this with flat with organic supports and 6 walls at 15 infill. It is a little tight so I would widen it on PrusaSlicer about 1% or…

Downloads
14
Likes
0
Rating
0
P
PrintablesSushiimi

Simplehuman 14oz Sensor Pump Covers

These covers should fit Simplehuman's 14oz sensor pumps pretty much the same as the original covers. Easily modified in your desired slicer program to add a debossed or embossed label for side by side pumps.

Downloads
13
Likes
2
Rating
0
P
PrintablesCarter

Glass Spice Jar Holder (4oz)

Holds 4 oz glass square spice / seasoning containers. Printable with no supports. Containers I used: https://a.co/d/0d3oSkaY Designed in FreeCAD. Feel free to request other layouts in the comments.

Downloads
13
Likes
4
Rating
0
P
PrintablesTham TBM

UA 24oz Bottle Carabiner Replacement Part

A fix for the under armour 24 oz bottle carabiner. The metal parts like the spring fit snugly with a bit of force :D

Downloads
13
Likes
1
Rating
0
P
PrintablesHespoHusky

Zap-a-Gap 4oz Gridfinity Bin

Gridfinity bin for 4oz Zap-a-Gap CA glue. The bottle is actually 42mm diameter, so it was basically designed with gridfinity in mind!

Downloads
12
Likes
3
Rating
0
P
PrintablesMartin Franzon

Manna 64oz stack growler cup handle

I got the Manna 64 oz growler with 4 cups from Costco and its great to be able to have 4 cups together with a large thermos. However the cups are quite thin and get a bit hot to hold without the handle so this solved my problem of burnt…

Downloads
12
Likes
2
Rating
0
P
PrintablesLev 3DD

64oz Glass Water Bottle Handle Fix

Bottle handle fix for 64oz glass water bottle. I would recommend printing in a strong filament, such as PC/ABS. The bottle cap insert is what interfaces with the inside of the bearing/bottle cap and the handle fix interfaces with the…

Downloads
12
Likes
1
Rating
0
P
PrintablesTeddy Monacelli

Grip Ring for top of 24oz/700ml Takeya Water Bottle

I lost the little rubbery grip around my 24oz Takeya Water Bottle. I have no idea if other people lose these- you basically never take them off except to clean them. I printed this with some cheap Amazon TPU filament and this came out…

Downloads
11
Likes
2
Rating
5
P
Printableskbob

Drink sleeves for SimpleModern 24oz tumblers

These sleeves go around your drink and create a thumb rest, making it easier to hold for long periods. The long green one has hollow pads that give it a squishy feel. The short black one is more rigid. I made these for SimpleModern 24oz…

Downloads
11
Likes
2
Rating
0
P
PrintablesRecycled

Soylent 24x14oz carriage solution

Tested for capacity ✅ printed at 15% infill and has held up. Overhanging handles will need to be supported.

Downloads
11
Likes
0
Rating
0