Search results: 63

Sort order

1,311 models

P
Printablesonus

BenchMade BM63 Balisong - Circuit Tanto

I took a look at admin's "Benchmade 62 balisong butterfly knife M3 fasteners" and I was inspired to make it just a little bit cleaner. So I hid the m3 nuts in the blade and the handle. and added a cool circuit board look and a tanto blade…

Downloads
496
Likes
80
Rating
4.75
P
PrintablesLittle_Leo

Featherboard Bosch GTS 635-216

Rechen für den seitlichen Anschlag der Bosch GTS 635-216. Es können hierbei Werkstücke bis zu einer Höhe von 50 mm verarbeitet werden. Der Anschlag kann zusammen mit dem Featherboard und der Halterung im zusammengebauten Zustand unter der…

Downloads
460
Likes
87
Rating
5
P
PrintablesOBA

Flexible SUNLU Filament Spool Adapter V2.0 (63mm to 51mm)

The SUNLU changeable filament spools (~63mm center hole, detachable parts to refill wound filament) have slightly different diameters on their left and right side. This makes adapters with fixed diameter to fit very tight (hard to remove…

Downloads
244
Likes
21
Rating
5
P
PrintablesBurfot

Bosch GTS635-216 Zero Clearance Insert

Zero clearance insert for the Bosch GTS635-216. I had to print in two pieces and glue them, but I've included an "un-split" stl also. I added sections of 100% infill around the corners, the joint, and where the blade will cut through. I…

Downloads
224
Likes
24
Rating
0
P
PrintablesPapyjo
Downloads
217
Likes
28
Rating
0
P
PrintablesJAKUB VIKTORA
Downloads
168
Likes
38
Rating
5
P
Printablesschneems

DustyBoi: Under Table Vacuum adapter for Delta 52-963 Bandsaw

Here's a video in action: https://www.reddit.com/r/functionalprint/comments/myy667/i_used_to_have_a_dusty_bandsaw_now_i_have_dustyboi/ This attachment removes the dust from the bandsaw blade. The vac attachment is sized for a Festool D36…

Downloads
135
Likes
32
Rating
0
P
Printableslienmeat

Mount for Spektrum AR631 Receiver

Fits the Spektrum AR631 Receiver, and possibly others. The mount should be printed small-side down, so that the lip that keeps the narrow side of the RX (the side with the antenna) from sliding through faces the bed. Supports are not…

Downloads
114
Likes
8
Rating
0
P
PrintablesAaronOaks

Coin Battery Holders CR1632 CR2032 CR2450 LR44

Coin cell battery holders made to fit in C and D battery dimensions. Designed to add cell batteries to unused C/D slots in a battery organizer. Currently supports: CR1632 CR2032 CR2450 LR44 These are the batteries I use so that's what I…

Downloads
102
Likes
8
Rating
5
P
PrintablesMakr3.0

Play Cards Box for 63 mm x 88mm Cards

A box which has a hexagon pattern on both sides, the box fits 63 mm x 88mm cards.

Downloads
93
Likes
6
Rating
0
P
Printablespavel

Portable hinged battery case for CR123A / 16340

Print-in-Place Hinged Box for 4x CR123A Batteries Compact, one-handed operation storage box for 4 CR123A batteries (or CR123 or RCR123A or 16340) with an integrated hinge. Optimized for one handed use. Materials needed: 2 x magnets (size…

Downloads
83
Likes
15
Rating
5
P
PrintablesMarek Zítka

Zetina 6323 sewing machine mode knob gear

Zetina 6323 sewing machine replacement gear which changes modes. UPDATE 18.2.2024 After a great cooperation with sewing machine workshop in Slovakia and one of their clients, we made a better version with new measurements (thanks a lot to…

Downloads
70
Likes
4
Rating
0
P
PrintablesUnknown1622
Downloads
69
Likes
6
Rating
5
P
Printablesshoyler

Sony a6000 Series Thumb Grip with Support Handle EXTENDED | a6000 a6100 a6300 a6400 a6500 a6600 a6700

Extended version of a hot shoe grip for a6000 series cameras. This allows for some access to mode knob while not interfering with the standard Sony eye piece cover. Pictures show how the model fits on an a6600 and an a6300.

Downloads
68
Likes
6
Rating
0
P
PrintablesFejszi

Dell Latitude D620/630 HDD Cover

I made this simple HDD cover for the Dell Latitude D620/D630 notebook because I couldn't find an existing STL for it. No Extra hardware needed Print Settings: Material: Anything works from the cheapest PLA to the most expensive PEEK Print…

Downloads
65
Likes
3
Rating
0
P
PrintablesKiJudo

Convertor from Glock 17 to Glock 19 Safariland 6354

Convertor from Glock 17 to Glock 19 Safariland 6354 (with Surefire X300). Made primary for airsoft holster copy from Wosport, but usage better with 9mm (the "pin" diameter is 7,7 mm - same as airsoft copy btw). Thanks to this piece, it…

Downloads
60
Likes
3
Rating
0
P
PrintablesGamerMechanic81

Crying Girl (1963) Roy Lichtenstein

This was almost impossible for me to figure out how to do and streatched my abilities to the limits. It will likely torture your printer and it shouldnt be attempted unless you have it dialed in enough to minimize stringing. I've set up…

Downloads
55
Likes
5
Rating
0
P
PrintablesTeo_211

1963 corvair monza wall art silhouette

wall art silhouette model of the 1963 corvair monza. Adjustable size. I accept model suggestions or ideas of new models

Downloads
47
Likes
10
Rating
5
P
PrintablesOBA

M63x1.5 Blind Stuffing + Nut and TPU-Sealing / M63x1.5 Blindstopfen + Mutter und TPU-Dichtung

M63x1.5 threaded blind stuffing to close unused M63-openings. Unused PG48-openings in housings are also possible to close with this blind-stuffing set, but the opening must be widened to >63mm for the blindstuffing to fit. [1] Thread…

Downloads
45
Likes
4
Rating
0
P
PrintablesStephen Massman

Curved card tray for 63x89.5 cards

Curved card tray for 63x89.5 cards. I decreased the size to 152x103x45 vs 157.1x115.1x32.5 size of the original. I really liked J erry's design but wanted a tighter fit on the cards side to side movement and taller. I tried increasing the…

Downloads
38
Likes
9
Rating
0
P
PrintablesNordic

Playmobil Cannon Axis Wheel 41x14 Replacement - 30030600 30063460

Replacement for the Playmobil cannon's wheels/axis. The axis is appr. 41 mm long (incl. hub) with a wheel diameter of appr. 14 mm. Original part numbers are 30030600 and 30063460 - depending on the color. In the original design, there is…

Downloads
28
Likes
16
Rating
0
P
PrintablesMichal Pešek

Trodat 4638 stamp cover

Print settings: nozzle: 0.4mm layer height: 0.2mm material: PETG perimeters: 3 infill: 15% supports: no color change: 1) 0.4mm, 2) 1.0mm note: for better quality emblem Irecommend use only one perimeter in first layer.

Downloads
26
Likes
1
Rating
0
P
PrintablesRudi

Epson projector remote holder 219863800

Wall holder for Epson remote controller: 219863800. The remote control is used for several projectors, such as EH-TW7000, EH-TW7100, Home Cinema 3200, Home Cinema 3800 and more.

Downloads
19
Likes
1
Rating
0
P
PrintablesJiK

Silicon cable holder - DODGE Polara 1963

Silicon cable holder for Dodge Polara 1963.

Downloads
17
Likes
3
Rating
5
P
PrintablesDante

Yet another Connector for HP6632 or and 6632A/6633A/6634A and 6631B/6632B/6633B/6634B

4x Hirschmann SEB 2600 G M4 or any other connector with a 12mm installation diameter 2x m4 12mm m4 (fits into the screw holes for the rackmounts) I printed it without support

Downloads
13
Likes
5
Rating
0
P
PrintablesCardinalSong

633a Saltshaker Mic Clip to On Stage Quick Connect Female

I bought a saltshaker mic last week and needed a way to connect to the quick connect system (On Stage QK2) that all of my stands are on….so here we are. If you have a 633a, it should work. There were multiple manufacturers (Altec, Western…

Downloads
12
Likes
2
Rating
0
P
PrintablesF Engineering

ISO 7000-0633 front fog light

EN: To identify the control that activates a special light (usually yellow in colour) located in the front of the vehicle to aid forward illumination in foggy conditions. To indicate the operational status of the front fog light. DE: Zur…

Downloads
11
Likes
3
Rating
0
P
PrintablesJérémy Reeder

.63-caliber Marshmallow Blowgun

A simple top-loading blowgun of ½” PVC works well once a mini marshmallow reaches the chamber, but the ammunition tends to jam up in the loading tube. My 3D-printed loading tube resolves this with a tapered inner diameter that gets larger…

Downloads
11
Likes
4
Rating
0
P
PrintablesJPMakesStuff

Snow or rain sheilds compatible with Ryobi PCL690 and PCL632 LED light

Designed to keep snow/rain out of the battery area of the PCL690 tripod and the out of the hinges and power button of the Ryobi PCL632 360deg LED light The PCL690 cover allows only the 18v battery to power the tripod (it slides into the…

Downloads
8
Likes
3
Rating
0
P
PrintablesF Engineering

ISO 7000-1563 volume empty

EN: To indicate that the container is empty. To identify the empty reading or indicator position on the display or container. DE: Um anzuzeigen, dass der Behälter leer ist. Zur Identifizierung eines leeren Behälters auf einem Display oder…

Downloads
7
Likes
0
Rating
0
P
PrintablesGary

Deere Replacement for R98630

Tractor parts to replace John Deere part R98630. Note that the part includes a reinforcement with a #10 SAE washer so it is recommended that the .3MF be used which will pause the print when the washer is to be inserted. This design is…

Downloads
6
Likes
0
Rating
0
P
PrintablesDominicFdouse

BST-863 Hot Air Station Tip Holder

Printing Instructions Filament Material Advised PETG/PET/ASA Material Propaties Required Property Type Constancy Hard Durablity Not brittle Sun Bleaching Protection depends on use case but would advise for long term use not using PLA…

Downloads
4
Likes
1
Rating
0
P
PrintablesKREKASH

MSI-GF63_PORTABLE-DISPLAY

You will need to assemble the model: threasted rod m5 2 nuts m5 2 washers m5 Cordless Drill and sandpaper:})

Downloads
1
Likes
0
Rating
0
P
PrintablesCormango

AMG GT 63 Coupe - 1/10 Scale RC Car/Display Model

This is a 2024 AMG-GT 63 Coupe inspired 1/10 scale RC Car / Display Model. You can find detailed info and assembly process in the video below. Body is divided to 38 parts depending on the color and requires little to no painting. Pieces…

Downloads
4,355
Likes
1,264
Rating
4.93
P
PrintablesDesignByLibb

Stackable box 100x160x63

Layer - 0.2-0.3mm Walls - 2 Infill - 15% No support !

Downloads
4,121
Likes
1,183
Rating
5
P
PrintablesAtom's Lab

ASTM D638 Tensile Strength Test Pieces (5 Types)

Simple models made in accordance with ASTM D638 testing for polymers. Type I through Type V available. Public domain - Use as required without restriction

Downloads
2,734
Likes
88
Rating
5
P
PrintablesKitcard Studio

G63 Car - Kit Card

An easy to print and fast to assemble G63 Brabus Kit Card. Use it to decorate your room or to express your love for engineering and cars!

Downloads
2,591
Likes
495
Rating
3.14
P
PrintablesLukas

Gridfinity Battery Holders (CR1632, CR2032, CR123(A), LR44)

Based on the block template i designed some gridfinity battery holders i couldn't find online (at least not in this dense packing). Fusion files and STLs included for these batteries 40x LR44 8x/11x/14x CR123(A) 20x CR2032 12x CR1632 Note…

Downloads
2,227
Likes
218
Rating
4.94
P
PrintablesPeterH1500

63mm / 2½" Ball Valve Type Non-Clog Blast Gate for Workshop Dust Extraction Network

Update 07 Apr 24 A truncated version of this style and size of blast gate is now available (Print 835725) Update 06 Apr 24 Uploaded 63mm to 50mm adapter. The 63mm end sleeves outside the ball valve exit/entry tube (1.5mm taper), the 50mm…

Downloads
1,709
Likes
376
Rating
5
P
PrintablesBuildX

#0163 Backpack Shoe Carriers using Rugged "D" Carabiner

*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********** [UPDATED 7/11/24] “Fishie” the fish-themed shoe…

Downloads
1,647
Likes
864
Rating
4.77
P
PrintablesMaxT

Christmas Door Trim Corner 63 - Christmas Stocking etc (Christmas ornament)

https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish I strongly suggest sizing it up to fit your entire heat bed as…

Downloads
1,586
Likes
389
Rating
4.94
P
PrintablesMrHanjak

Tractor - Zetor 6341

⚫ Zetor 6341 ⚫ This is the last model for the year 2023. Expect a new models in 2024 Follow me on YouTube for more info about what you can look forward for. :-) Zetor 6341 is the last tractor I will make in foreseeable future. At least…

Downloads
1,484
Likes
291
Rating
5
P
Printablesfrederikf

100+ Ball bearings in standard sizes (608, 6200, 6202, 6204, 6206, 6000 and 6305 etc.) - uses airsoft 6mm bb balls or 4.5mm steel balls

UPDATED: Slightly larger tolerance (0.1mm diameter for the bearing balls). Choose random seams if you printer is not well-calibrated. I recently needed a slimmer ball bearing for a spinner project, so I did my own take on ball bearings to…

Downloads
1,404
Likes
129
Rating
4.83
P
PrintablesAndry Maltsev

Filament spool spacer 63mm (Sunlu, NV Print, etc..) for Bambu Lab AMS Lite and AD5X

Collet type expander for filament spool, with an inner diameter of 63mm. Eliminates spool slippage in AMS. I recommend printing from PETG, 2 walls

Downloads
1,222
Likes
141
Rating
4.75
P
PrintablesxSteve

Vase 763

A beautiful flower vase for decorative purposes to hold artificial flowers. It is 178mm tall and 112mm wide. The photo shows the vase printed in vase mode. It can be printed in normal mode with 0 top layers and 0% infill and 3 or more…

Downloads
1,206
Likes
173
Rating
4.88
P
Printablesfreakstuff_de

Rinser / water dispenser / watering bottle cap for PET-Bottles - Thread with DIN 6063-1

I've created a rinser that can be applied on every PET bottle with DIN 6063-1 thread (widley used in europe and may be other countries). How to print? The model can be printed in place, without any need for support or rims. A smooth print…

Downloads
1,205
Likes
133
Rating
4.73
P
Printablesch1a

Vornado 630 Replacement Fan Blade

The blade length and hub measurements match the original, but I sort of eyeballed the angles of the fins. The hub fits snug, but should press on fine. I've been running this for a year in my shop and I can't tell a difference between the…

Downloads
1,076
Likes
42
Rating
5
P
PrintablesSSKopaka

ASTM D638-14 Specimen Type I

ASTM Standard Tensile Test Specimen Type I with 3.2mm thickness as defined by ASTM International's publication D638 (Standard Test Method for Tensile Properties of Plastics) version 14

Downloads
984
Likes
4
Rating
5
P
Printablesmilspecmoehring

Safariland 63xx Series Glock 17 Holster Barrel Plug for Glock 19/45

This piece replaces the factory Barrel Plug of a Safariland 63xx Glock 17 Holster to make it fit 19 and 45 Models. Reccommended Settings: Heat Resistent Filament 10%+ Infill 5+ Perimeters 0.1mm Layer Height Print Orientation and Supports…

Downloads
969
Likes
53
Rating
5
P
Printablesthall72

Lego Compatible (63864.dat) Tile 1 x 3

This model is compatible with the lego system.

Downloads
887
Likes
44
Rating
5
P
Printablesthall72
Downloads
874
Likes
42
Rating
0
P
Printablesthall72

Lego Compatible (6636.dat) Tile 1 x 6

This model is compatible with the lego system.

Downloads
811
Likes
39
Rating
5
P
PrintablesOpenair

Land Rover Defender (L663)

Land Rover Defender (L663)

Downloads
787
Likes
46
Rating
0
P
PrintablesKonneker

Nalgene 63mm Replacement Cap/Lid

One of our Nalgene lids lost in a heated altercation with our dishwasher. This is a clean-sheet design that functions and seals much like the original. I printed this cap with the opening down and with supports (manual set) under the…

Downloads
747
Likes
63
Rating
5
P
Printablesthall72

Lego Compatible (6632.dat) Technic Beam 3 x 0.5 Liftarm

This model is compatible with the lego system.

Downloads
742
Likes
29
Rating
0
P
PrintablesPeterH1500

63mm / 2½" Butterfly / Throttle Valve Type Non-Clog Blast Gate for Workshop Dust Extraction Network

20May20 Marius-Bloemhof requested the CAD files: ( https://cad.onshape.com/documents/5425e358a4e266ea950b034e/w/fb495421e309359b374e4475/e/07ed980bcf8592c544c8964f ) Update 24Aug20: I've posted a new design for a blast gate based on a…

Downloads
736
Likes
133
Rating
5
P
Printablesthall72
Downloads
723
Likes
55
Rating
5
P
PrintablesGeorge

35mm Slide Filament Samples - 63 Materials + Boxes

The best way to test the transparency is with a 35mm slide. You can look at it in the light or you could even use it in your old slides projector. Generated for the most common materials, I'll try to keep updated. I take the list from…

Downloads
722
Likes
266
Rating
5
P
Printablesfns720

USW Flex Mini wall mount w/ 63 mm hole distance

This is a sturdier remix of a previous model. I have also uploaded the Fusion 360 file in case you want to alter on the design. Update #20230403: uploaded a version with DIN rail mount on its side.

Downloads
709
Likes
89
Rating
4.91
P
PrintablesJan Lipovský

Screwdriver 25mm Hex Bit Box 63 slot with small place for adapters

This is remixed a 63 slot 25mm Screwdriver Bit box with additional small space for other bits and reductions. Original is designed by Jonny. All thanks goes to Jonny. Print instructions Original note by Jonny: I Adjusted the Infill and…

Downloads
701
Likes
89
Rating
4.79
P
PrintablesTailS MeDiA

V3.1 Gridfinity Big/Small Parts Project Tray W/ 1x1 Screw Bin, 63 Slot Grid Magnet Tray & Stackable Lid

UPDATE Version 3.1: updated the fillet on the inside of the small squares to make grabbing screws easier. Version 3.0: I have included 2 models that use a 63 slot grid for ultra small magnets. One of the 2x2 trays has the grid embedded if…

Downloads
690
Likes
123
Rating
5
P
PrintablesBeusekomse Baan

Nederlandse Spoorwegen 636 Diesel Shunting Locomotive - Gauge 1 / 1:32

I have modified the BR Class 08 published by Peter Davis at the GaugeOne3DCircle ( https://gaugeone3dcircle.groups.io/g/home/files/BR%2008%20Shunter ) to the Dutch version of this locomotive. Thanks again to Peter for publishing these…

Downloads
668
Likes
60
Rating
0
P
PrintablesThe_Trap__

Feather Board für Bosch GTS 635-216

Featherboard für die Bosch GTS 635-216 Tischkreissäge. Ein langes Featherboard mit Nutensteinen und Kreuzgriffschrauben für M6 Schrauben + Muttern. Featherboard for Bosch GTS 635-216 table saw. A long featherboard with sliding blocks and…

Downloads
667
Likes
110
Rating
4.8
P
PrintablesPeterH1500

63mm / 2½" Truncated Ball Valve Type Non-Clog Blast Gate for Workshop Dust Extraction Network

Update 30 Sep 25 Michael Bohrer ( MichaelBohre_2970532 ) commented that he had broken this design because parts of it were too thin. On investigation, I agree that the outer edge of the connecting tube is thinner than I intended. I've…

Downloads
634
Likes
81
Rating
5
P
PrintablesPlasticyBits

Bearing Press Tools 63800 6802 6900 6902 Bicycle MTB

Bearing Press Tools for 6900, 6902, 6802 Bearings The files marked "Press In" are a remix of bikenerd tools. I just changed the numbering to be on the side so it could be bigger text. The files marked "Press Out" are for pushing the pivot…

Downloads
614
Likes
112
Rating
5
P
Printablesjferris11115

ASTM D638 Type IV "dogbone"

ASTM D638 Type IV "dogbone" used for material tensile testing

Downloads
611
Likes
12
Rating
0
P

Twilight Imperium Wormhole Tokens [thing:4866300 remix]

A highly visible (and in my opinion, super cool) set of wormhole tokens for use in Twilight Imperium 4th Edition. This is a multi-color remix of the wormhole gate tokens for Twilight Imperium 4 by Vypper on Thingiverse. Just set a color…

Downloads
602
Likes
48
Rating
4.75
P
PrintablesTim

lego technic 1x15 liftarm 6321716

obscure technic 1x15 with perpendicular holes. was missing from my AT AT and I didnt want to wait on shipping Print Settings Printer Brand: Anycubic Printer: Kobra **Rafts:** No Supports: No **Resolution:** .1 Infill: 100% **Filament:**…

Downloads
593
Likes
54
Rating
5
P
Printablesthall72
Downloads
579
Likes
55
Rating
4
P
Printablesmaxelman

Better bit holders for Milwaukee 48-89-4630 / Shockwave Case

The default holders for this set aren’t very good, so I made new ones You can also stack all the bits on one side, which leaves room for other bits on the right. I also included a version with the ½" bit holder in place of one of the 1/8"…

Downloads
562
Likes
212
Rating
5
P
Printableshangloose

MotorPod for 6384, Gong V2 / Slingshot Hoverglide / AXIS 760 Mast / UNISEX

Support only needed for the Motorpod! Screws: 4x M4 x 25 V2A / 2x M5 x 16 V2A / Inserts: 2x M5 https://foil.zone/t/diy-6384-foil-drive-assist-from-south-germany/19307

Downloads
544
Likes
30
Rating
5
P
PrintablesIdea Prints

Lego Duplo Brick 1x2x2 #76371

🧱Lego Duplo Brick 1x2x2 #76371🧱 RICORDATI CHE OGNI PERIODO DI GIORNI PUBBLICHIAMO I NUOVI PROGETTI (ANCHE LEGO) QUINDI ISCRITIVI,👤 SCARICA⬇ E LASCIA UN LIKE👍. REMEMBER THAT EVERY PERIOD OF DAYS WE PUBLISH NEW PROJECTS (ALSO LEGO) THEN…

Downloads
540
Likes
56
Rating
4.83
P

Me 163 Komet Kit Card

The Messerschmitt Me 163 Komet was a rocket-powered interceptor fighter used by the Germans during WWII. The Me 163 used a HWK 109-509 bipropellant rocket engine, fueled by hydrazine hydrate and methanol. This fighter engaged against…

Downloads
520
Likes
98
Rating
5
P
PrintablesMario Alvarez

HSW Large honeycomb basket 100x100x63mm

honeycomb basket for heavy items

Downloads
519
Likes
93
Rating
4.67
P
Printablesthall72

Lego Compatible (63965.dat) Bar 6L with Thick Stop

This model is compatible with the lego system.

Downloads
517
Likes
35
Rating
0
P
PrintablesAlex Hirsch
Downloads
505
Likes
35
Rating
0
P
PrintablesKahnindustries

Abra - Pokemon 063

In honour of Pokemon Go's March 15th Community day I have knocked up an Abra one piece and multi-material model! Definitely needs supports! Print instructions Category: Creatures

Downloads
503
Likes
185
Rating
4
P
PrintablesL0ran

Bosch Mum5 rotator - Bosch pt. nr. 00630760

I printed it with 50% infill, brim and supports addded to: The bottom face of the wings (not the inclined ones) The base circle The center square which is a bit above the ground the small gaps on the driver pins sticking out downside The…

Downloads
495
Likes
44
Rating
3
P
Printablesthall72

Lego Compatible (73763.dat) Technic Worm Gear 6L

This model is compatible with the lego system.

Downloads
487
Likes
36
Rating
0
P
PrintablesYosobodo

Kawasaki ZX6R 636 Ninja Oil Filter Funnel

Make oil changes less messy on the Kawasaki ZX6R 636. You can easily remove the filter with funnel in place.

Downloads
470
Likes
39
Rating
5
P
PrintablesMM

Messerschmitt Me-163B-1a Komet kit card

can be printed together the model needs to be glued together or separately in other colours can be printed without support the Messerschmitt is very realistic Print in place kit card , Assembly required

Downloads
466
Likes
90
Rating
4
P
Printablesthall72

Lego Compatible (93563.dat) Minifig Hair Mohawk

This model is compatible with the lego system.

Downloads
460
Likes
51
Rating
0
P
Printablesthall72

Lego Compatible (29633.dat) Minifig Hair Bob Cut Parted in Middle

This model is compatible with the lego system.

Downloads
459
Likes
51
Rating
5

Impeller Poolrunner S63

Since the impeller and the driver are very likely to be defective on this model, I have designed a spare part here.

Downloads
456
Likes
6
Rating
5
P
PrintablesMonty

KARCHER Water Inlet Elbow (discontinued). Part number: 5.063-984. For model: K 2.03 / T-50

This is a reinforced replacement part. I printed it for my father's washer six months ago and it is still in use without problems For model: K 2.03 / T-50 and others. KARCHER Water Inlet Elbow (discontinued). Part number: 5.063-984.

Downloads
452
Likes
17
Rating
0
P
Printablesszwojtyla

Dasai Mochi DIY with 16340 LiIon battery and 1.3" oled display

This is a remix of a great project. Source: https://makerworld.com/en/models/1844353-the-mochi-housing-and-inner-frame-dasai-mochi#profileId-1970817 I added a 16340 Li-ion battery and a TP4056 USB-C charger. You'll also need an SS12D00…

Downloads
423
Likes
21
Rating
0
P
Printablesthall72
Downloads
422
Likes
45
Rating
0
P
PrintablesHeyus

Sortimo H63 Insert (parameterized)

Parameterized insert boxes for Sortimo T-BOXX G (63mm tall, 52mm square) organizing containers so that you can print sizes that Sortimo does not offer. These inserts are designed to stand on small 2.5mm feet in each corner and therefore…

Downloads
418
Likes
55
Rating
5
P
PrintablesIng. Ákos

Brabus G63 model

You can 3D print your dream car :)

Downloads
408
Likes
21
Rating
0
P
Printablesfelixna

HP Thin Client T630 Stand

I bought a used HP Thin Client T630 where the stand was missing. Since the stand is important for the passive ventilation, I designed this one myself. As with the original stand, it can be mounted for horizontal or vertical position. It…

Downloads
406
Likes
22
Rating
5
P
PrintablesMarMarMarielle

Mercedes G63 AMG

Importing is quite small, you can just scale it up! I've found printing it diagonal like you do on resin printers works the best for this model. 10% infill worked fine, I let Cura/Creality Slicer make supports for me, they came off really…

Downloads
400
Likes
19
Rating
4
P
Printablesblackjackbender

2-1/2" - 63mm / 64mm Magnetic Dust Collection Connectors / Fittings

Inspired by the Robert Bieber magnetic dust collection fittings which I use in my shop. I needed something in the 2-½" variety and due the proximity of fittings on a couple tools using the original design was not viable so I created my…

Downloads
395
Likes
54
Rating
5
P
PrintablesWind_Redrock

Messerschmitt Me-163B Komet

Messerschmitt Me-163B Komet

Downloads
393
Likes
23
Rating
5
P
PrintablesJoe Fincher

Lego Technic Axle and Pin Connector 6332570

This is a recreation of Lego Technic part 6332570 (axle and pin connector). I printed on my Prusa i3 MK3S at .10 detail. After printing, I would recommend either the .07 or .05 ultradetail. The part works perfectly but it is not totally…

Downloads
392
Likes
34
Rating
0
P
Printablesthall72
Downloads
387
Likes
51
Rating
0
P
PrintablesMartin Majewski

Bosch Professional - GTS 635 216 - Suction Hose Adapter To 36 mm

This is my take on a DIY suction hose adapter for the GTS 635 216 bench saw. My vacuum cleaner from Einhell has a hose with an outer diameter of 36mm and an end socket wall thickness of 2mm. This adapter takes both into account and…

Downloads
387
Likes
33
Rating
5
P
Printablesthall72

Lego Compatible (67638.dat) Minifig Centaur Body

This model is compatible with the lego system.

Downloads
386
Likes
73
Rating
5
P
Printablesthall72
Downloads
382
Likes
43
Rating
5
P
PrintablesChase Adkins

Skil Table Saw TS6307-00 Miter Bar

This is a 300mm miter bar that fits the Skil TS6037-00 table saw. It has 5 holes in the top that I used for heat set inserts for an M5 bolt, but the Fusion file is available if you would like to do something different.

Downloads
371
Likes
42
Rating
0