145 models
Wall mount for the 18V DV 18DL Hitachi Cordless Drill. I started with Slavish's design for a 12V Impact Driver mount and modified as needed. Thanks to Slavish for a place to start and a great idea. Drill hangs out of the bottom, so be…
Da für diese Heißluftlötstation keine richtigen Füße mitgeliefert wurden und das Ding etwas wackelig steht, und, weil die Düsenvorsätze lose dabeiliegen, habe ich diese Basis konstruiert. Die Seitlichen Laschen krallen sich an den…
This is a remix of Jakeleeee's Prusa Mini 48deg heatbed connector cover, which stretches it to be about 3mm longer, to provide the additional clearance that I found was required on my Prusa Mini+ to allow the cables to exit without being…
Airbox flange to 3" (MAF delete) for Nissan S13 Ca18det
Adapter to connect a Hikoki UP18DA to a SUP pump hose.
A tray that can keep all your soldering equipment secured in one area. Designed to hold a Hakko FX-888D Model Soldering Iron and Station. Complete with 12 T-18 size slots for nozzle heads. A solder spool holder with varying size holes to…
I designed this battery case to fit the Yaesu VX8DR ham radio. It also fits the FT1dr, FT2dr, FT3dr, and FT-5dr. It takes 18650 Li-ion cells. I will link to some of the parts I used below. This is designed to use unprotected cells. The…
Hot Air Soldering Gun handle 8858/858D
Clamp for the Hakko FX-8801 handpiece (supplied with FX-888D) from fns720 's h eat-set insert press modified to fit thrutheframe 's press for 2020 extrusion and MGN9 rail. The clamps are secured with a 40mm M3 bolt. Two versions are…
This is a nozzle holder for hot air gun station Atten 858D+ : https://eleshop.fr/atten-at858d-hot-air-soldering-station.html Easy to print, just unscrew the 2 screws on the side, place the nozzle holder and screw back with originals…
Couldn't find something to attach to this particular Hakko model to hold my spare tips and solder. So I made this one. Category: Tools
A Simple tip holder I designed for the Hakko FX888d soldering iron. The holes are a little snug at first but inserting the soldering iron tips a few times will loosen it up.
Just a small holder for the nozzles of the 858D, which can be attached with an M3 screw on the left side of the station.
Very simple tip holder for the HSW. Holds 14 tips. This is designed to be easily removed from the HSW when needed. All feedback welcomed.
Esalta la passione per il mondo BMW con questa esclusiva silhouette della BMW F20 118d/116i. Realizzata con precisione, la sagoma cattura le linee dinamiche e sportive della vettura, poggiando su una solida base che integra una targhetta…
Scale Model of the WSR-88D NEXRAD Radar dish and pedistal. Model was done in Fusion 360 using drawings from the techmanual. Some parts have been scaled up to allow 3D printing. my printer was pretty small back in 2018, so I printed each…
This is part of a set of beginner friendly 3D printable ribs I created for myself. The edges are soft as to not tear the wall. Friendly for even potters just finishing their first 6-week class without the most centered wall. The duller…
Required a stand that allowed visibility into each well of a 96 deep well PCR plat for some covid19 research work, the stand is designed to allow visibility into each well to see which well is being used. This was designed for our…
Glue your o ring out of 3mm o-ring cord and asemmble your maf adapter of choice. If i see that stuff on etsy or ebay i am going to mount my old rod bearings in your motor or bent your rocker arms.
A Raspberry Pi controlled set of printed components to build a 4-legged / 8 degree of freedom (8DOF) walking robot 'inspired' by the various Arduino MiniKame robots that can be found on the web.. Eight servos, controlled by a PCA9685…
Simple hanger for Ryobi R18DD3-115S and similar screwdrivers.
I have a recessed light in my ceiling that reflects off of my tv. I created this light shield to block the light. The ceiling has an 18 degree pitch. The diameter of the recessed light fixture is 122 mm. The model is designed to fit…
A tray that can keep all your soldering equipment secured in one area. Designed to hold a Hakko FX-888D Model Soldering Iron and Station. Complete with 12 T-18 size slots for nozzle heads. A block of 3 holders for thin tools such as…
8D8 Discussing the use of torture with Boba Fett Modeled in Blender Fixed for 3d Printing in Blender and Makeprintable. Added small model orientated with tree supports already added. (meshmixer)
I own a Mercedes 508D , but some of the door trim was missing. I modelled a replacement part. fits nice. printed without support in PETG.
This is a mounting plate for the dual motor driver board that uses a L298D. They are widely available. This mounting plate serves three purposes: act as a spacer between the mounting surface and the board (4 mm) prevent scratching the…
Printed PLA .2 layer no supports and all parts should be positioned to print. Make sure you print 2 side rails and 2 rod pins. My printers tolerances are pretty tight but I did have to hit one of the side rails with sandpaper very…
For USB plug use FLEX material.
A little holder for your TP-Link TL-SF1008D eight port ethernet switch. You can conveniently slide the switch in and have it secured by the clip. Pulling on the ethernet cables only pulls the switch tighter into the mount, not out of it…
This is a 3d shadow of an 8d cube. A truncated version of it that did not need support was featured on the cover of Make Magazine Winter 2013.
This handle allows you to more easily pull your scooter in its folded form rather than having to carry it. Its consists of two clamps that attach a bar/tube to your handlebar to be used as grip. The clamps are designed with 22mm diameter…
A 10-inch rack mount for the TP-Link TL-SG1008D V5 switch. Same version as reviewed here: https://www.servethehome.com/tplink-tl-sg1008d-review-unmanaged-8port-gigabit-switch/ This mount comes in two variants, one for the plain switch,…
I was inspired by https://www.thingiverse.com/thing:4931271 But sadly that thing did not work for my AW3418DW monitor. So after a dozen of trial & error, I finally made something working great for me. Hopefully it works for you too.
This magnetic tips holder for the soldering station Hakko FX-888D was inspired by amcanhazdeath's Hakko Tip Holder . The Hakko FX-888 was elected as Japan Design Selection 2009 according to Hakko's official website . Here is my attempt to…
Got really annoyed with the tips for my soldering iron tipping over. This is a better solution to store these tips. May be a bit tight depending on your printers calibration. May be worth scaling to 110% Soldering Tips:…
PETG required for springiness.
B5 Audi VW Upper Radiator Mount 8D0121276 Found my project car was missing these upper radiator mounts and found that supply was limited or had long lead times to get new replacements. I was lucky enough to find a set in a junk yard and…
Hakko FX-888D soldering station modification that provides a way to hold solder and extra tips. Easily mounts to soldering iron holder for easy access to solder and extra soldering iron tips. Cleaning brushes and soldering iron holder are…
I created this part to hold my 5.8dBi RAK antenna in my attic. Assembly instructions: Screw the clip with a wood screw Clip the antenna inside the support Repeat with a second clip you're done! Print instructions: Files You can use the…
This a remix of the Moai sand mold. I added 8deg draft, so you get the cast out without damage. The mold can also be clamped together and is self aligning. The file “moai_supported.3mf” contains all needed support for easy printing.…
Modified version of Metabo / Hikoki C18DBAL circular saw dust port by Sekellus1 to allow use with the osVAC system. Printed with Bambu P1P in PLA. Perimeters: 3 Layer height: 0.2mm Supports: only needed on buildplate to support mounting…
[ENG] Printed on an ender 3 at 0.28 layer hight support needed but it use the stock screws [FR] Imprimer avec une ender 3 a 0.28 de hauteur de couche nécessite des support, mais utiliser les vis de la machine
For this press: https://www.amazon.com.au/gp/product/B077LPTD2T https://www.amazon.com/DASBET-Universal-Adjustable-Workstation-Workbench/dp/B0CPJ1JCD1
8878D soldering station holder for IKEA Skådis Print instructions Unassociated tags: skådis Category: Electronics Summary 8878D soldering station holder for IKEA Skådis Print Settings Printer Brand: Prusa Printer: i3 MK3 Supports: Yes…
This is an add-on for the YAOGONG 8878D soldering station, that fits the stock soldering iron stand, has 12 slots for additional soldering iron tips and 3 for the hot air gun tips. It's great if you have multiple tips and don't like to…
Holds 10 nozzles for the 858D hot air rework station. Designed to be attached to the top of the 858D using 2x6mm magnets inserted and glued in the holes on the underside. Round protrusions are 20.5mm in diameter. I printed it with PLA,…
Print the main body along with two retaining clips. These just screw in with a couple of M3 screws on the back to hold it in place.
I love my Yaesu VX-8DR. It has been discontinued for many years now. Last I checked, replacement parts are hard to find. The screw that holds the dust cover over the headphone and DC ports on mine broke off. While the dust cover does…
Radiomaster TX16S antenna plate for a long range 8db 2.4 Ghz antenna. At the same time making the antenna removable in case you want to replace your stock antenna. I made it so that it's easy to print with a flat bottom. It wil take the…
I Create a Nozzle Holder for my 858D Hot Air Rework Station You need 2 10x2 Neodym Magnets: https://amzn.to/2VnqfVu Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: No Supports: No Resolution: 0,2 Infill: 25%…
I created this part to hold my 5.8dBi RAK antenna in my attic. Assembly instructions: Slide the antenna inside the support Root the cable from antenna below the support If necessary screw the support with 4x 4x30 screws you're done! Print…
The holder holds the two differently sized cups on the machine body. For Yaogong hot air station.
This is intended to be used with DCS-BIOS . I also designed a custom PCB for the button matrix. You can find the KiCAD project and the Arduino source on GitHub . The GitHub repository also contains a BOM with all hardware parts you need.…
Dieser Eckenschutz wurde ursprünglich für meinen Sub 18D gefertigt, passt jedoch auf nahezu jede Ecke mit einem Radius von 10 mm. Die Abmessungen betragen 60 mm × 60 mm × 50 mm , wobei alle drei Innenseiten einen Radius von 10 mm…
A sturdy, reusable replacement cap for standard 1‑gallon water and milk jugs This model is a functional, easy‑to‑print cap designed around the 38DBJ neck standard , commonly used on 1‑gallon water and milk containers in the US. It’s a…
In order to save some space on my desk of my "home office", I've made this little mount for my Dell monitor (U2518D). Currently it's used with a Carbon X1 (6th?) gen, but it has been designed for my next workstation, a Dell Latitude (most…
Printer: Tronxy 200x200 Material: Petg Nozzle diameter: 0.4mm Number of bottom layers: 3 Number of bottom layers: 3 Bed temperature: 70C Nozzle temperature:~250 Support: yes
The YIHUA 858D hotair station is shipped with different nozzle attachments. Mine came with “hose clamp” styles ( with screws). So I made this one for 3 nozzles, which fits on top of the station. There is space for 4 magnets d=8mm h=2.8mm,…
Protective plate for Hitachi cordless jigsaw. Requires 4 M5 machine screws. https://a360.co/2Gsb81T Print instructions Category: Parts Summary Protective plate for Hitachi cordless jigsaw. Requires 4 M5 machine screws.…
Ryobi R18DD5 RYOBI ONE+ VERKTYGSHÅLLARE
HAKKO FX-888D Holder (2 Part Version) Combined the vertical piece and the main base of the model by cluckOmatic and moved it a bit farther away from the main box. Horizontal piece is unchanged. I quickly meshed these two items together so…
My hot air soldering gun would sometimes fall out. So I made these 2 pices to help it stay in place.
There are plenty of other options for the nozzle holder here on the site. But the designs are mostly for completly round nozzles and the attachment on the other side of the heating pistol will need more space than needed. Therefore I…
You might want to print this, if the nozzle holder collides with the baseplate: https://www.printables.com/model/576604-handle-spacer-20mm-858d-smd-soldering-station Made in OpenSCAD, the source files are attached. They combine these…
Remote control holder, print from the outside to the inside, for tapered head screws, in the material and color of your choice
I was looking for an easy way to mount a camera and light on my Dell U3818DW Ultrawide Display. I first made a model of the upper part of the display stand and used it as a cutout for a simple box with holes for universal camera screws.…
This is an inexpensive visual center punch that lines up with measurement lines and makes it fairly easy to strike accurate, centered punches. It also has additional ruled posts that permit you to strike additional spaced punch marks with…
Compatible with Yihua, WEP, BAKU and similar 858D type stations.
This is a re-made based on Zack's original template and has been improved with the following modifications, taking into account MachoThick's design : A reserved charging hole for ES15. An added Hakko FX-888D soldering iron tip hole…
a stand that makes it easier for me to work with the hotair station and keep my workplace tidy
Simple holder for the basic nozzle set which came with hot air station. magnets hold the nozzles in place and to the body of the air station. Magnets are 8mm x 3mm…
REQUIRES LONGER M4 Screws! Print with holes going “veretically”. Any settings will work. Does not require support.
A magnetic holder for the different tool end sizes that come with the 858D Rework Station (and possibly others). The magnet holes on the bottom are sized for 10mm x 2mm magnets. It should also be said that the tips need to be cool before…
A remix to hold 9 tips instead of 5. Tweaked the dimensions for a better fit. Print Settings Rafts: No Supports: No Resolution: 0.2 Infill: 40 Filament: ESun ABS+ Notes: . Category: Tools
Insert for a size 28D pill bottle. Used to separate and store two different prescriptions in the same bottle. Also great for prescriptions requiring intermediate doses (one and a half tablets). Recommend poking a small hole in the bottom…
If you have one of these super cheap 2U Rackable Systems Server Chassis (Sometimes sold as SGI Servers as well), you may get into trouble keeping the rear CPU cool enough. I got into this issue with my Supermicro X8DTI-F Dual Socket 1366…
As I wasn't able to find a battery powered planer with guides to chamfer our beams, I decided to design them on my own. It perfectly fits the existing holes on the base plate. You will need some longer screws to connect the adapter and…
Compact case for hot air station electronics. Mounting for 1602 lcd display, 2 potentiometers, hot air gun GX16 socket and mains power socket. The case has removable lid attached by 2 M5x8 flat head screws. 2 versions avilabile for each…
Printer Brand: i3 MK4 Rafts: No Supports: Enabled Layer Height: 0.2mm Nozzle Diameter: 0.4mm Material: PETG
Friend of mine collects Commodores and related accessories. One of the keyboards he acquired was missing the fold out to elevate it. I broke out the calipers and replicated it in Fusion 360. I printed it 3 walls, 20% infill, with PLA, .2…
The holder can be printed from any material. No supports are necessary when the model is placed on the build plate with the foot facing down. A layer height of approx. 0.15mm is recommended. By using threaded inerts for M3, it is possible…
It's the crisis, spare 6 servos. This is all the modified parts to convert the 18DODF hexapod( http://www.thingiverse.com/thing:432829 ) to a 12DOF quadruped. the coding part need some heavy tweak ;)…
Insert for holding soldering iron tips.
Vytiskněte všechny části domalujte detaily a slepte.
Halterung für D-Link DSG-1008D. Habe es für die Hutschiene gebaut. Gedruckt auf P1P mit 0,4 Düse und Baum Struktur Stützen, mit standartprofiel 0,2mm. Verwendet wurde PLA.
If you find modern sewing machine's wheels too slippery, this model is for you. Well, this particular one is for Singer 14T968DC serger/coverstitch but its wheel is slippery too. Designed to print with slightly flexible filament I have,…
Update: Added a short version only 10mm,8mm,5mm Just a Holder for 10mm,8mm,5mm and 3mm Nozzle. Heat the PLA and screw the screws in :) Print Settings Printer: Craftbot Plus Rafts: No Supports: No Resolution: 0.3 Infill: 19 Category: Tool…
Front Floppy YT Data model YD-702d-6638d for MSX 8235 and 8245
Holder for Soldering Station 948DB+ Introduction and Functionality The holder for the 948DB+ soldering station has been designed with user comfort and ergonomics in mind. Thanks to its careful design, this model provides a stable and…
I wanted to store my hot air station tips on the station itself, so I made this organiser. It clamps onto the side wall of the tip firmly, and should work with any ~23-25mm diameter tips. The pictured print is with a 0.25mm nozzle, 0.10mm…
Type of corner / connector allowing to build a number of bespoke gates for Whoop Drone Racing. Fits 20mm or 22mm PCV Other Drone Accessories here: https://www.printables.com/@StudioMechanik/collections/3053772
There are two versions, the only difference is the individual mm markings - on one they are proud/raised; on the other they are recessed. Choose whichever suits your printer (they are 0.1mm width so YMMV). Printed at 0.15mm for detail…
My commodore 128D faceplate was damaged many years ago, I bounght my first 3D printer recenlty and I thought was a good learning experience try to repair it. Category: Replacement Parts
This model Replace Hitachi CJ18DSL tool change. I lost clear plastic guard and does not have its dimension so this 3D model may not fit the plastic guard. Print with at least 80% infill
Device to align and stack a KEOGR T12 Solderingstation on top of a 858D Hotair solderingstation. My print was done with PETG and 0.4mm nozzle. But any other Material and Setting should work.
Wall mount for the Thomson TO8D 8-bit computer. It might also work with Apple IIs, or other chunky computers. For thinner 16-bit computers, see LeeF's original model.
I designed a lens hood and rear lens cap for my Nikon 105mm f/2.8 D Macro lens. The hood has 52mm threads on the inside as well as the outside so you can attach the front cap without removing the hood. The rear lens cap also has 52mm…
TL;DR Gear design vase, could but need not printed in vase mode. Collection https://www.printables.com/social/277533-yahbluez/collections/417438 https://www.printables.com/social/277533-yahbluez/collections/447662 Motivation Playing with…
Flash disc holder + insert for Yenkee YTC 020----Flash signature
