Gecko fridge magnet 8x3mm
Remix originally from Thingiverse: 1363148 (I think). Scaled up and bottom chopped off slightly for better printability. Has 2 holes for 8mm round magnets 3mm thick.
- Downloads
- 1,723
- Likes
- 316
- Rating
- 4.96
384 models
Remix originally from Thingiverse: 1363148 (I think). Scaled up and bottom chopped off slightly for better printability. Has 2 holes for 8mm round magnets 3mm thick.
8x32 LED Matrix Frame No glue*, tape or screws needed Accessible USB port Wall- or desk-mounted Snap-fit sockets for ESP-WROOM-32, MAX4466 or MAX9814 microphone and DC Power Connector for easy installation Optional socket-less version * I…
This is a modified version of this Pixel It case . It was created with the excellent Pixel It project in mind. The case has mounting points and an access port for the D1 mini, a cable path to make free-standing use easier, and optional…
Dübel d6-D8x39 8Stück Ich empfehle PETG und 100% Füllgrad. Der seitlich angebrachte “Flügel” ( Verdrehsicherung ) gehört beim Druck natürlich nach unten. Bei Verwendung von ABS, PC oder Nylon kann es zu Warping beziehungsweise…
I remix the model from LayersFarm https://www.printables.com/model/308131-bambu-lab-y-splitter-with-pc4-m10-pneumatic-connec/files in order to fit my 8x3mm magnets.
This model houses a WS2812 8x32 LED matrix, an ESP32 and the necessary cables. I'm using it as a status display for my PV inverter, the ESP runs Pixelix to display the contents. Most printers are too small to print the three parts in one…
- 8x3mm magnets to be glued in - 15% infill used in example - Big Note on this print: The example pictured used a layer modifier to add ironing from 3.5-4.5mm. It's not necessary, but I did not test without it on. If you have never done…
I wanted to add an OLED to my custom ergonomic keyboard, but there wasn't a great place on the case. This is a simple solution. Two versions. The original is thicker with a wider bezel. It's easier to print and work with, but a little…
I have 8x3mm magnets instead of 6x3mm magnets which the original thing was designed for so I just enlarged the magnet hole in tinkercad. I used a hole diameter of 8.2mm in the design, and my 8x3mm magnet press fits in perfectly and holds…
Chaned the magnet hole for 8X3 mm mangets. Filter I use: https://www.amazon.com/dp/B0782T7L6P
Original: https://www.printables.com/model/217840-axe-magnet I liked the original, just wanted it smaller, so I scaled it down and changed the magnet size to 8x3mm (wxh) Smallest version of the original that could support 8x3mm magnets I…
This was based on the diffuser at https://www.thingiverse.com/thing:1903744. It has the same internal dimensions (10mm square grid, 9.2mm internal with 0.8mm walls between). I added added a 0.4mm layer to the top, a 0.4mm recess for the…
This insert was designed for a digital caliper as an addition to the BaBo organizer from Willi Dimensions: 3 x 3 + 5 x 2 (lenght: 8, width: 2-3) ----------------------------------- Update V2: Added some pads where the caliper lays on, so…
I love the original fish magnet from kennyd1gital but I don't have the exact magnet size, so I made this remix for 8x3mm magnets. You can stick a maximum of 3 magnets in, but in my opinion 2 are enough :) Please also give a like to…
“So, my sadness makes perfect sense…and I do have vague memories of people refusing to breed with me.” - 8x3mm magnets to be glued in - 15% infill used in example -example printed on an MK4 using prusament filaments (PLA) If you’d like to…
CORE One Nozzle replacement tool remixed with space for two 8x3mm round magnets so it can be stuck to the side of the printer. Versions included for for Prusa and E3D, Sock and No Sock. For detailed information about the Prusa vs E3D…
- 8x3mm magnets to be glued in - 15% infill used in example -example printed on an MK4 using prusament filaments (PLA) If you’d like to shoot some spare change or a dollar my way, you can donate here (paypal). (check out my profile for…
I want to have a led matrix to show information of my weather station. I first looked at the design from fractalnoise but one 8x32 matrix does not offer enough space. So I decide to make my own design. To have more space i make the design…
- 8x3mm magnets to be glued in - 15% infill used in example -example printed on an MK4 using prusament filaments (PLA) If you’d like to shoot some spare change or a dollar my way, you can donate here (paypal). (check out my profile for…
“Now get out from there, you're ruining the painting!” “You're ruining my joke.” 8x3 magnets to be glued in. Examples printed with 15% infill. If you’d like to shoot some spare change or a dollar my way, you can donate here (paypal).…
The Part that goes behind the printer is around 40mm wide and over all its only 70mm wide. The holes are also widen for 8mm magnets. You can find the original here:…
- 8x3mm magnets to be glued in - 15% infill used in example - Big Note on this print: I used a layer modifier to add ironing from 3.5-4.5mm. This allowed for better quality of the outline, to avoid gaps etc., without ironing every top…
“We’ll get cars and like, we’ll get jobs, and we’ll have to like, mow lawns and scrub the grill, but we’re never gonna score ever! It’s gonna suck!” - 8x3mm magnets to be glued in - 15% infill used in example -example printed on an MK4…
This is another IKEA Skadis pegboard with dimensions 28x32cm that is ment to be used attached to the side of other IKEA shelves that have 28cm of depth. This version is ment to be attached with double sided tape on the proper spots that…
These models are modular in design and made to connect to each other on a surface like a refrigerator.
“Cream of the crop!” - 8x3mm magnet to be glued in - 20% infill used in example -example printed on a mini+ using prusament filament (PLA) If you’d like to shoot some spare change or a dollar my way, you can donate here (paypal). (check…
“Beavis, I have seen the top of the mountain, and it is good.” - 8x3mm magnets to be glued in - 15% infill used in example -example printed on an MK4 using prusament filaments (PLA) If you’d like to shoot some spare change or a dollar my…
- 8x3mm magnet to be glued in - 15% infill used in example -example printed on an MK4 using prusament filaments (PLA) If you’d like to shoot some spare change or a dollar my way, you can donate here (paypal). (check out my profile for…
“This is ham, soaked in rum.” - 8x3mm magnet to be glued in - 20% infill used in example -example printed on a mini+ using prusament filament (PLA) If you’d like to shoot some spare change or a dollar my way, you can donate here (paypal).…
This insert was designed for a vernier caliper and ruler as an addition to the amazing BaBo organizer system from @Willi. Check out his site for more great inserts and modules. This vernier caliper and ruler insert can be used for vernier…
“It's okay to lose to opponent. It's never okay to lose to fear.” - 8x3mm magnet to be glued in - 20% infill used in example -example printed on a mini+ using prusament filament (PLA) If you’d like to shoot some spare change or a dollar…
The park is being audited today. Pops tried to pay the taxes with lollipops This is, by far, my favorite magnet design yet. Don't tell the other magnets…or you're fired. MORE REGULAR SHOW MAGNET DESIGNS COMING SOON! 8x3mm magnets to be…
- 8x3mm magnets to be glued in - 15% infill used in example - Big Note on this print: I used a layer modifier to add ironing from 3.5-4.5mm. This allowed for better quality of the outline, to avoid gaps etc., without ironing every top…
“Me, I don't like parties.” - 8x3mm magnets to be glued in - 15% infill used in example -example printed on an MK4 using prusament filaments (PLA) If you’d like to shoot some spare change or a dollar my way, you can donate here (paypal).…
- 8x3mm magnets to be glued in - 15% infill used in example -example printed on an MK4 using prusament filaments (PLA) If you’d like to shoot some spare change or a dollar my way, you can donate here (paypal). (check out my profile for…
- 8x3mm magnets to be glued in - 15% infill used in example -example printed on an MK4 using prusament filaments (PLA) If you’d like to shoot some spare change or a dollar my way, you can donate here (paypal). (check out my profile for…
This case was designed to fit an 8x32 LED matrix and a microcontroller in the back. There are two different case thicknesses to give you a little extra space for the hidden microcontroller. The case is designed to be a tight fit for the…
TPU/PLA Bullets (8x30mm) without MMU/glue! | REMIX for Glock 19 "working toy gun" G19 note: There are 4 DIFFERENT VERSIONS of the bullet (8x30mm) , see in the picture below! Select the preferred size of the tip & bullet to match them!…
“Here we go!” - 8x3mm magnets to be glued in - 15% infill used in example -example printed on an MK4 using prusament filaments (PLA) If you’d like to shoot some spare change or a dollar my way, you can donate here (paypal). Quick Update:…
Always guard your pepperonis. 8x3mm magnet to be glued in…you know who else glues stuff in? MORE REGULAR SHOW MAGNETS COMING SOON (4 total!) 8/2023 - Redesigned the entire model to be more muscle-y, bro. New design allows for easier…
The magnets are hidden about 0.6mm below the surface of the bottom and button peaces. You will need to put a pause in the G-code to insert the magnets.
- 8x3mm magnets to be glued in - 15% infill used in example -example printed on an MK4 using prusament filaments (PLA) (prusament orange looked so good!) If you’d like to shoot some spare change or a dollar my way, you can donate here…
- 8x3mm magnets to be glued in - 15% infill used in example -example printed on an MK4 using prusament filaments (PLA) If you’d like to shoot some spare change or a dollar my way, you can donate here (paypal). (check out my profile for…
- 8x3mm magnets to be glued in - 15% infill used in example - Big Note on this print: I used a layer modifier to add ironing from 3.5-4.5mm. This allowed for better quality of the outline, to avoid gaps etc., without ironing every top…
Simple case for an ESP8266 or ESP32 board (in my case NodeMCU), a temperature sensor DHT11 or DHT22 and a small SSD1306 oled screen. Works great as a small Duino-Coin IoT setup. Designed with Tinkercad. Parts need to be glued together…
A remix of the Gridfinity Magnet Dispensor by Carl Belcher, with the Honeycomb Wall standard!
- 8x3mm magnets to be glued in - 15% infill used in example -example printed on an MK4 using prusament filaments (PLA) If you’d like to shoot some spare change or a dollar my way, you can donate here (paypal). (check out my profile for…
“What can I say? I'm a Vagittarius. Oh!” - 8x3mm magnets to be glued in - 15% infill used in example -example printed on an MK4 using prusament filaments (PLA) If you’d like to shoot some spare change or a dollar my way, you can donate…
You'd better get yourself a garlic T-shirt, buddy, or it's your funeral . 8x3mm magnet to be glued in. Example print used 15% infill. 8/2023 - Redesigned this model, as it needed some fixing. Turned out fantastic with a layer color…
“Personally, I liked the university. They gave us money and facilities, we didn't have to produce anything! You've never been out of college! You don't know what it's like out there! I've WORKED in the private sector. They expect…
I didn't have anymore 5x3 magnets that the original was designed for, so I fired up Shapr3d and made this version to fit the 8x3 magnets I had sitting around. I made it from scratch instead of just modifying the STL itself. Inserts…
“I like Lena Dunham. It's nice to see someone with my exact body type succeed.” - 8x3mm magnets to be glued in - 15% infill used in example -example printed on an MK4 using prusament filaments (PLA) (BIG THANK YOU to ChellaBelleM3d for…
I made in ABS with a original Prusa MINI
I used 2 pieces diffuser from old LCD monitor. Cut to 321x81mm. You will need diffuser frame (without screen) from original project. I made mounting bracket to fasten matrix led down and also used as mounting hole for back cover. Two…
Showcase your custom pixel art, scrolling text, and dynamic animations with this sleek and versatile enclosure, designed specifically for a flexible 8x32 WS2812 RGB LED Matrix. This case provides a sleek and professional look and durable…
Your nickname was never Ace. Maybe Ace Hole. Face up print with layer color changes: Example used 15% infill 8x3mm magnet to be glued in (New) Face down multi-material print: Same infill File is tagged ‘multi’ in the filename Paint bucket…
- 8x3mm magnets to be glued in - 15% infill used in example -example printed on an MK4 using prusament filaments (PLA) If you’d like to shoot some spare change or a dollar my way, you can donate here (paypal). (check out my profile for…
Print 2 of the grid parts from opaque material. Print 2 end panels and 1 center panel from translucent material. The two grid parts are connected with the center panel, then the end panels go on either end. This assembly sits down on the…
To the winch, wench! 8x3mm magnet to be glued in. Example print used 15% infill, but…we don't care whether or not we care. If you’d like to shoot some spare change or a dollar my way, you can donate here (paypal). (check out my profile…
Print with tree supports from the build plate. If you want more colors, adjust the print order by objects. No need to glue anything or use screws. PLA, 0,2 layer recommended
“Right. That's bad. Okay. All right. Important safety tip. Thanks, Egon.” - 8x3mm magnets to be glued in - 15% infill used in example -example printed on an MK4 using prusament filaments (PLA) If you’d like to shoot some spare change or a…
HANDLE WITH MAGNETS (8x3mm) - Cantilever tool/sewing box | REMIX note: Just print the “female version" twice and insert the bars with the magnet-holes instead of the original ones . For the yellow 215x215 box in the pictures, 3 magnets on…
- 8x3mm magnets to be glued in - 15% infill used in example - Big Note on this print: I used a layer modifier to add ironing from 3.5-4.5mm. This allowed for better quality of the outline, to avoid gaps etc., without ironing every top…
Remix of Hydra Logo Magnet. Split into two parts to make printing with the MMU easier. Also resized the magnet holes to be 8x3mm
This is a remix of Prusa Core One Side Storage by Swing King Design They mentioned that it may be helpful to increase the magnet size, and I had 8x3mm ones handy. This works perfectly for my needs, thought I'd share it with others. I…
a simple remix of the original but with bigger magnets. print with supports from printbed
“Try to imagine all life as you know it stopping instantaneously and every molecule in your body exploding at the speed of light.” - 8x3mm magnets to be glued in - 15% infill used in example -example printed on an MK4 using prusament…
Since my tool/pegboard have 38x38mm grid pattern, I wanted to print a mounting bracket to fit my chargers there. I staggered the mounting tabs, so you can install the chargers as tight as possible side by side. Installation requires: 2pcs…
This model is a remix of the famous filament cutter 45°. I found that a 60° angle cut is more likely to fit smoothly in the mmu2s tubings so ive designed this model out of Fusion360. It have been designed to house 8x3mm Neodym magnets…
English (Deutsche Beschreibung siehe unten) I offer the hex-bit-storage in several variations : This version offers room for 8 x 3 bits and for the Wera Rapidaptor (If you have no use for the Rapidaptor, see the other variations below)…
“You touch those and your G.I. Joes are gonna be M.I.A., my friend! and then who's gonna call Little Momma Joe, to tell her that her boy ain't coming home, cause SOMEBODY was asleep on guard duty!” The Master Shake magnet—just add your…
“Mother, you treat her right!” - 8x3mm magnet to be glued in - 20% infill used in example -example printed on a mini+ using prusament filament (PLA) If you’d like to shoot some spare change or a dollar my way, you can donate here…
“Well, they tell ya, 'Never hit a man with a closed fist.' But it is, on occasion, hilarious.” - 8x3mm magnets to be glued in - 15% infill used in example -example printed on an MK4 using prusament filaments (PLA) If you’d like to shoot…
English (Deutsche Beschreibung siehe unten) I offer the hex-bit-storage in several variations : This version offers room for 8 x 3 bits only Other variants are: 7 x 3 bits only 8 x 3 bits plus Wera Rapidaptor 8 x 3 Parfguide All variants…
It'll save your life someday! It's okay to yell this and then begin hambonin' when you feel threatened. (check out my profile for more Regular Show magnets) 8/2023 - Updated the entire design. I'd been wanting to redesign this one for a…
Magnetic Cable Clip that uses 8x3 circle magnets. Need superglue to hold the magnets permanently.
Simple remix changing the hole size from 6x3mm to 8x3mm.
A remix of "MC Taz Man's" chute from "thrutheframe" fantastic Chute Cover and Poop Management System for 8x3 magnets, which I had on hand. Some of my magnets were quite loose, and others were a bit more press fit. I used a drop of CA glue…
Simple Solar reflection guard for the Vortex Solo 8x36 monocular.
A barely-a-remix of thrutheframe's excellent round hygrometer mount for dry boxes. The only change here is that the magnet holes have been widened out to accommodate 8mm by 3mm round magnets instead of the original 6mm ones. Works…
Like keejo's magnets just with bigger magnets, they are even compatible to keejo's . Dimensions 35x36x4,4mm Non printed parts One magnet with 8x3mm for each Lizard. Print instructions I printet it our of PLA with the 0,2mm quality setting…
8x3 Magnets pushed in from the back
allows you to install a 8x3 magnet into Honeycomb Storage Wall insert. Great for holding small files,screwdrivers,pry tools and any other small metal items you want to mount to the HSW.
“Don't you know what's goin' on out there? This is no Sunday School picnic!” 8x3mm magnets to be glued in. Example print used 15% infill…because there was no more room in hell! If you’d like to shoot some spare change or a dollar my way,…
Meatwad get the honies, G'! Uses an 8x3mm magnet Don't forget to pick up the Ignignokt & Err magnets, here: https://www.printables.com/model/219088-ignignokt-magnet-can-you-see-this-denver-8x3-magne Print: -Supports: Boy, you don't need…
“Shake, get rid of the damn sandwich! If you keep it here, you're gonna eat it, then you're gonna die.” The Frylock magnet—just add your own 8x3mm magnets. If you’d like to shoot some spare change or a dollar my way, you can donate here…
“I am the terror that flaps in the night! I am the wrong number that wakes you at 3am...” - 8x3mm magnets to be glued in - 15% infill used in example -example printed on an MK4 using prusament filaments (PLA) If you’d like to shoot some…
UPDATE I've updated the design to make the arm a little stronger. Every arm I tested (in PLA) broke at the hinge point. Might need to be printed with ASA or CF. My filament lever broke. I had some 8x3mm magnets laying around, but they are…
“Remember I told you I didn't like getting egg on my face? Well, right now, I'm wearing a whole omelet.” - 8x3mm magnet to be glued in - 20% infill used in example -example printed on a mini+ using prusament filament (PLA) If you’d like…
It's super simple. I originally designed a simple box with a lid for storing pencils, pens, and paintbrushes. https://www.printables.com/model/619803-simple-storage-box-with-lid-for-paintbrush-pen-pen I was looking for a small storage box…
“[reading from the manual] How to Turn Off Your Suck-O-Matic.” "In case Suck-O-Matic sucks instructions, see page 101…"PREPARE TO DIE"?!” - 8x3mm magnets to be glued in - 15% infill used in example -example printed on an MK4 using…
Imported from my designs on Thingiverse. Original upload was 22.07.2019 (dd.mm.yyyy) Look-alike Porsche Rim for 68.8x36ZR, this is not the same rim as the one Lego sells, this is smaller. I dont have the large one, so this is designed by…
I printed everything with .15mm layers so the top of the magnet is covered by 4 layers instead of 3
I have a lot of 8x3mm magnets so I modified the OurAngryBadger model in order to mount the muffler only with magnets. Print / Install Instructions: I recommend printing with 4 walls, 6 top and bottom layers, and 0.16mm layer height on…
I absolutely love the feeling of two magnets repelling each other. That little bit of resistance and the way they sort of slide past each other is just cool. These rings embed 8x3mm magnets inside them and are super fun to play with.…
Inlay für Kronkorken um einen 8x3mm Neodym Magnet wir z.B.hier: https://amzn.to/2FPV8sI anzubringen. Kann als Pinnwandmagnet oder für Kühlschränke verwendet werden ;) Print instructions Category: Organization Print Settings Printer Brand:…
“Launchpad! Can't you even ride a camel without crashing it?” - 8x3mm magnets to be glued in - 15% infill used in example -example printed on an MK4 using prusament filaments (PLA) If you’d like to shoot some spare change or a dollar my…
Oh, I adore Rock Paper Scissors! Except where I come from, it's called “Quartz Parchment Shears!” 8/2023 - Updated the STL with some improvements, support for a second magnet, and better layering for printing in layer change colors.…
- 8x3mm magnets to be glued in - 15% infill used in example -example printed on an MK4 using prusament filaments (PLA) If you’d like to shoot some spare change or a dollar my way, you can donate here (paypal). (check out my profile for…