Clip Heizung Abdeckung seitlich Befestigung Flachheizkörper ZK00940001 z.B. Kermi
Gedruckt mit Prusament PETG 0,2er Layer 70% infill
Print approx. €0.27–€0.33 excl. taxPreliminary estimate for PETGSource material: PET
- Downloads
- 224
- Likes
- 13
- Rating
- 5
165 models
Gedruckt mit Prusament PETG 0,2er Layer 70% infill
Print approx. €0.27–€0.33 excl. taxPreliminary estimate for PETGSource material: PET
Dust collection with 58mm attachment for vacuum. Replaces Dust Nozzle 416497-7 and has attachment for existing vs direct attachment of 58mm vacuum. Print Settings Printer brand: Prusa Printer: i3 MK3 Rafts: Yes Notes: I printed using…
Print approx. €1.83–€2.24 excl. taxPreliminary estimate for one variant
Huge credit and thanks goes to, joestrander, for supplying and providing the original file through Thingiverse. I remixed the original file to fit the Polymer 80 PF940SC Glock 26 frame a little more tightly, allowing for a more seamless…
First off, thanks to, PrintedFirearm, for providing the "Glock magazine base extension", as it gave me a good starting point, and thanks to, joestrander, for providing the "G19 to G26 mag adapter." I modified the Glock magazine base…
Fan shroud to mount an Noctua NF-A4x10 to an LSI 9400-16i HBA. Design idea copied from @BlackHornet_355398 's fan shroud here: https://www.printables.com/model/377809-lsi-9300-16i-noctua-nf-a9x14-fan-shroud I have a LSI 9400-16i, but this…
I wanted a new stereo with Bluetooth and reversing camera for my old Volvo 940 and found a really cheap 2 DIN from China, only known as 7018B. It doesn't use a metal frame, the radio is put in the frame and then the entire thing is…
Simple tray for Philips Multigroom 7940 that you can change intro travel box or case. You can print whole thing without supports - the only think you can add them is the edge of the snap lock on top cover (support will make dimensions…
The son of a friend of mine broke the original winch on his Playmobil Crane (Model 4036). Unfortunately, the parts are no longer available from playmobil. So i took it to replace the parts with 3d printed versions. The winch prints…
Printed face down. 3 walls 0.3 layer. with supports. Mounted with clips at the back. but can also be used without the clips. snug fit both on gauge side and airvent.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
These are the (upper) parts for an original garden model railway car LGB Nr 94005. You need to have the undercarriage yourself. Alll parts are designed and split so that you can print it without supports with exception of the railing.…
I am CAD Kim, the manager of the DCinside Minipc Gallery, a leading mini PC community in South Korea. You can find my channel here : Kim_CAD on YouTube . This is a full case replacement Mod Kit for the MINI PC called GenMachine. It is a…
A remix of another person's already great webcam holder. Please read the "Differences of the remix..." for more info.
This model is compatible with the lego system.
Simple bracket for hanging a FUJITSU FUTRO S940 thin client on the wall. Additionally, only 3x 4mm at least 50mm long countersunk screws and corresponding dowels are required. Ensure alignment on the print bed so that the upper hook can…
Just simply snaps into a rectangular hole / switch location in the dash of a Volvo 940 or 740. Photos show both original as printed part Note: Due to potential high car interior temperatures in summer time, do not print in PLA! (it will…
Do you love old volvos? Own old volvos? Or just like a cars in general. Well here you have the latest addition to you kitchen perfect for this christmas. Cookie cutters that are made to be 1/50 times the size of their normal counterpart…
This model is compatible with the lego system.
Found the 1995 Volvo 850 seatbelt release button by ksihota and printed that one first, but I couldn't get it to snap in place, instead it snapped of from one of the sides, so I looked closer and noticed that it was to tight in the…
Hazard switch cap for Volvo 940 or 740. Two designs: - Without the triangle cutout - With triangle cutout. Here you can place a little peace of red plastic / foil behind it, so the triangle lights up red when hazard lights are on Print…
The tailgate panels of the 700 and 900 series often suffer from cracked mounting points. I decided to come up with a neat way to fix this. I've design a few parts that can be printed on a 3D printer. Make sure you use ABS of ASA material.…
Volvo 940 Roof trim cap replacement above the driver side door. Will also probably fit Volvo 740.. These things often come loose and they rattle.. This version you can screw in tightly. Part B is optional, you can glue it on the back to…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Der Ofen dient in erster Linie als Ergänzung des Modells vom Streckenposten Kälberbruch , ist da aber bei der Vermessung und Dokumentation nicht nachgewiesen und damit dafür hypothetisch. Daher hier als gesondertes Modell, gern auch fürs…
This is a wall mount for a wireless router. This router is very light and thin enough to fit behind a dresser (as in my case) I am using this extra router as a wireless extension I have it connect via ethernet to my main router, but it…
I needed to change the scraper seals of my 1992 Suzuki Intruder 800. Saw that I needed a special tool from Suzuki to hold the damper rod in place when unscrewing the bolt. Googled the tool and redesigned it in Onshape. I have made two…
This is a replacement part for a South bend lathe model 9C that I just received, this part was worn out so made a replacement out of ABS PLA may be stronger. I made it in 2 halves and glued them together with ABS juice. The lathe has a…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Hood prop rod retaining clip for Suzuki, part number 09403-07311 The model is based on accurate dimensions taken from the original clip and fits perfectly on a 1999 Suzuki Jimny. Designed as a direct replacement for broken or brittle…
Print in PETG. Designed to be printed without infill/ solid plastic. Print upside down. I used spray filler to make it smooth. I did not want holes in my dashboard, so i added a hole in the back. .ipt files available upon request.
batman logo from 1940 to 2008
The Mark of Zorro - Zorro (Tyrone Powers) with Tornado - 1940 3D printable model.
It's a snug fit so I made it so that you just need to press down on the top for the bottom to pop up enough to grab it.
This is the second part of a set of change gears for cutting threads on an 8TPI imperial leadscrew lathe these was designed for a South Bend lathe model 9C. The teeth have 14.5 degree pressure angle The gear has a DP of 18 The module is…
Remix of the 20mm 16i fan shroud to fit a 9400-16i May fit others but I've only tested With that. Made it slightly wider to clip over the PCB rather then under the heat sink. Included a .dwg that contains 1 object all merged together and…
Replacement Straps for the Casio GW-9400. Models for 3DP optimized straps as well as close to original straps included. I recommend printing the 3d printing optimized straps. The bumps in the original whatchstraps result in a rough…
Just Print it front face down.. Note: Due to potential high car interior temperatures in summer time, do not print in PLA! (it will melt/deform) Print in ABS, ASA or other more temperature resistant material
Print in semitransparent material. I printed it in PLA and it held up just fine, despite the high temperatures in the car in the summer. Prints well without support.
Its a Complete Replacement for the Shure SRH 940 headphones. Printet in PETG with 4 walls and 20% infill. For the Headband, its best to print it solid and i uesd a brim. For the brackets you need support. i Printed it in an upright…
About Round Multibox 3.4L (EAN 8694064003156, produced in Turkey) with internal diameter of 22cm can be used as dry box for storing a spool of filament. It lacks seal and is made from elastic plastic so it needs tightening - that's why I…
I have purchased a new Volvo 940, first one in 14 years. Back then I only had a stick welder to do stuff and hand tools. Now I got 3D printers, so when it was time for me to increase power in my 940 Turbo. Injectors and MAF housing will…
This is a model of this building: anyway it's close. The top balcony and the front porch of the actual building are very small so I made those a bit larger, and I wasn't sure of the interior layout but this should be close on the first…
Magnetic lock replacement for the center console / armrest on a Volvo 940 (and probably 740) - Dimensions of magnet used : 10mm diam, 5mm height, 2.5mm hole (flanged) Search on Aliexpress for “10x5 round magnet with hole” - Screw clip is…
A box/tray for all the bits and pieces besides the main pieces. All rooms have a fillet edge so its easy to grab even the small parts. Height is made so it fit in the game box on top of the piece boxes a the plate (see picture). Size is…
A simple coin tray a friend asked me for.
This model is compatible with the lego system.
printed with Prusa mk3s+ 15% cubic infill no supports I don't know CAD so modifications were made in prusaslicer
A Sample from my current Kickstarter - a 1940s Section Gang Track Maintenance Worker with Shovel in multiple scales, including 54mm, 32mm, 1-64 and HO 1-87. I test printed up to 1:18. Highly detailed and accurate.
I love the original design done by @Ornotermes and thanks to offering the original CAD drawing I was able to use my sub-par Fusion 360 skills to make some small modifications to fit my use-case. I used a Sony XAV-AX5500 and to allow for…
Flash Gordon Conquers the Universe - Flash (Buster Crabbe) & Dale (Carol Hughes) - 1940 3D printable model.
May need to scale it to size a bit based off fit and nozzle sizing. I printed this with 0.6mm nozzle with 0.15mm detail.
Never been a fan of the “A-beam” gauge mounting cluster, former owner had loosely mounted one. So I decided this time I would just remove the ash tray and that little storage compartment which I never use anyways so. Here it is, 3 gauges…
Flash Gordon Conquers the Universe - Ming the Merciless (Charles Middleton) - 1940 3D printable model.
If you think it's usefull, please leave a like. A OSVAC Adapter for Makita 9404J Beltsander. It slips on the outer -diameter so the Adapter is more Ridgid and the Airflow is not reduced because of minimizing the hole diameter with putting…
Requires 3x M6 Nuts and appropriate length M6 screws. Some cutting of the sound deadening is required, aswell as trimming of the plastic “tray” under the steering wheel/around the throttle pedal) Only tested with Hella part number…
The Mark of Zorro - Don Diego Vega (Tyrone Power) and Lolita Quintero (Linda Darnell) - 1940 3D printable model.
Flash Gordon Conquers the Universe - Dr. Alexis Zarkov (Frank Shannon) - 1940 3D printable model.
The print in the photo is printer at 0.15 mm layer height, Hilbert Curve fill pattern in five colors.
Ersatzteil Batteriedeckel für Vtech 119404. Spare part battery cover for Vtech 119404.
Only tested with MKM aftermarket steel pedal but should be the same with an OEM pedal.
This model is compatible with the lego system.
This is a replacement part for a South bend lathe model 9C that I just received, this part was worn out so made a replacement out of ABS PLA may be stronger. I made it as a single piece model printed in the orientation as in the stl file.…
Printed in 100% infill using PETG. Based on the link below, this should also fit the 9300, but I don't have one to test. https://shockbase.org/watches/compatibility_overview.php
This is the start of a set of change gears for cutting threads on an 8TPI imperial leadscrew lathe these was designed for a South Bend lathe model 9C. The teeth have 14.5 degree pressure angle The gear has a DP of 18 The module is 1.411…
This is a Metric Translation gear for cutting metric threads on an imperial leadscrew lathe this was designed for a South Bend lathe model 9C. photo is of 80/63 translation gear as I don't think this 127/100 would fit my present set up…
A proper desk for private detectives and investigators of all kinds, with both working drawers to keep things tidy as well as two secret compartments to hide valuables and important documents. Just remove the snap-in panels to open up the…
Flash Gordon Conquers the Universe - Ming's Throne Room - 1940 3D printable model.
Fan Cover to cool SSD and Ram for: Mini Gaming PC AMD Ryzen 9 7940HS 2TB PCIe4.0 SSD 32GB DDR5 5600 MHz RAM, Desktop Mini Computers Windows 11 pro, Radeon 780M Graphics, 2.5Gbps LAN, HDMI 2.1, 8K USB 4.0…
Commonly used spare part for Oleo-Mac chainsaws now available in your printer :-) Print from polycarbonate at 101% scale (PC has some heat shrinkage). .
Subaru Forester SJ Cover Catcher Subaru OEM PNs: 94053AL100; 94053FJ000 Print inclined with organic supports, using the print post in the model itself. This reduces supports and keeps visible surfaces clean of support remains. Print post…
Maybe will help somebody... I needed to replace broken plastic lever for the engine in Fortius Tacx T1940. I printed with 12 perimeters, but in general it matters to have max perimiter count in the most fragile place (you can see on the…
On my parents home there are old Geberit (now Polipipe) Terrian gutters. Gutters are held by clips that are not avaliable to buy anywhere. I found project of replacement one made by Flicosh but it is not compatible with older models from…
Rear Door Handle Fiat Scudo / Citroen Jumpy / Peugeot Expert OEM 9408720738 - Maniglia Interna portellone posteriore Two Versions: Standard / Lite MANIGLIA INTERNA SERRATURA PORTA PORTIERA DESTRA PARETE POSTERIORE FIAT SCUDO FIAT…
Another Volvo 940 Turbo part. I wanted a more high flowing air filter, that also sucks in cold air and is "shielded" from the warm air in the engine bay. So I came up with this tube design, that utilizes the stock hole that is not…
If your 940 is not fitted with a Volvo guard alarm, you do not have the LED indicator in the front left speaker grill. If you want such an indicator, you can use this design. The speaker grill shows exactly where to carefully cut (dremel…
My son demanded one of his Playmobil cars to have a roof as otherwise it may get wet when it's rainy. This has proven to be a little challanging as the roof has curvatures in 2 directions and there is no step on the lower edge of the…
Replacement cover for the hole you can find in the kick panel under the steering column of a Volvo 940 (and maybe 940?) No supports needed when printing, just print it upright on the two screw holes Note: Due to potential high car…
repair piece for heater knob for 3522568 volvo 940 non ac printed fine with supports for clips mk3s
Iconic Movie Villains - Rebecca - Mrs. Danvers - 1940
This is a Metric Translation gear for cutting metric threads on an imperial leadscrew lathe this was designed for a South Bend lathe model 9C. The teeth have 14.5 degree pressure angle The gear has a DP of 18 The module is 1.411 The 63…
This model replicates the Subaru Clip Mat Floor C, part number 94099AA270 , used to securely fasten floor mats in various Subaru models. Perfect for enthusiasts, mechanics, or DIYers, this replacement clip ensures your floor mats stay in…
I upgraded my Alfa Romeo Giulietta's car entertainment system by 3D printing a magnetic tablet holder. Since I wasn't using the CD slot anymore, I designed a mount that fits right in there. The magnetic top holds the tablet securely, and…
Türöffner für eine Medion Mikrowelle MD 10940. Die Haltenasen brechen beim original gerne ab. Gedruckt mit PETG-CF. Das sollte halten für die Ewigkeit ;-(
Made for keychain and/or Tabletop display Printed using ESun PLA+ Green and Black @195°C, 200mm/s print speed and 0.2 layer height. Tank may need supports, snug default. Default print orientation will be its front facing upwards. Super…
Easy to print. Wheels move. Needs a bit of glue.
Volvo 940 tailgate interior upholstery repair parts. Fixes cracked mounting points. Bottom Side replaces outer mounting points (2) on tailgate interior upholstery. Bottom Center replaces inner mounting points (2) on tailgate interior…
Imprimé à la vertical en PETG , avec support sur le plateau.
Tisk raději na dvě poloviny, tryska 0,4, PLA.
This is a replacement part for a South bend lathe model 9C that I just received, this part was missing so made a replacement out of ABS PLA may be stronger. I made it in 2 halves and glued them together with ABS juice. The photo's are…
Honeycomb Storage Wall holder SATA 09401 feeler gauge. Possibly compatible with other gauges it's aprox: 86x10x13mm Non-Affiliate Link for this feeler gauge: https://www.amazon.com/dp/B097NN3RKD Although this is my own design additional…
Clips must be added with superglue :)
📄 Description Designed specifically for the Harbor Freight 69409 cable tie assortment, this Gridfinity-compatible bin keeps every size and color neatly separated, visible, and easy to grab. Buy here:…
My portable document scanner is incredibly useful, but it has one downside – it needs to have its charging cable plugged into a computer's USB port, not just a charging port. I don't have a lot of spare desk space, so I decided to create…
Throttle cable retaining clip for Suzuki, part number 09403-05311 The model is based on accurate dimensions taken from the original clip and fits perfectly on a 1999 Suzuki Jimny. Designed as a direct replacement for broken or brittle…
Printed at .3mm in PLA, 4 perimeters zero top and bottom layers. 30% infill “Stars”. No Brim no support on rack, the clip required support for the cutout.
Adapter von Makita Bandschleifer 9404J auf Standartabsaugdüse Ø35mm. Druckmaterial TPU