Search results: 9c

Sort order

234 models

P
Printablesluisriverag

Mini Pocket Slide Box (9cm | 12cm | 15cm) - H1.5cm-H3cm

Keep your small essentials organized and easily accessible with the Mini Pocket Slide Box . Designed with a smooth sliding lid and a secure "click" closure , this container ensures your items stay safe while on the go.

Print approx. €1.92–€2.34 excl. taxPreliminary estimate for one variant

Downloads
308
Likes
22
Rating
5
P
PrintablesFuu

Gaciron V9C-800 Shade

I made a shade because the light is quite dazzling. Use double-sided tape for mounting. While keeping the brightest part of the light alive, I cut the upward light. Maybe you can use it with V9CP.

Print approx. €0.63–€0.77 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
18
Likes
3
Rating
0
P
PrintablesTuTu

Mini Pocket Slide Box (5cm | 7cm | 9cm) - H1.5cm

👍 Don't forget to Like and Collect it, so you can easily find it later! ⭐ Keep your small essentials organized and easily accessible with the Mini Pocket Slide Box . Designed with a smooth sliding lid and a secure "click" closure , this…

Downloads
26,391
Likes
6,768
Rating
4.86
P
PrintablesTuTu

Mini Pocket Slide Box (5cm | 7cm | 9cm) - H2.5cm

👍 Don't forget to Like and Collect it, so you can easily find it later! ⭐ After a successful print, rinse with water for a smoother finish. The Mini Pocket Slide Box (25mm Tall) offers expanded storage while maintaining its compact and…

Downloads
3,460
Likes
788
Rating
4.93
P
PrintablesBlinkinlabs

19cm network rack

I wanted to organize our small pile of home networking gear, so I designed this 3d-printed rack. From top to bottom, it holds: Feed-through patch panel with slots for 9 keystone jacks Cisco SG250-08 L3 managed switch GL-iNet GL-MV1000…

Downloads
3,133
Likes
684
Rating
4.83
P
Printablestkachmikhailo

Legs for fpv drone (9cm-12cm-17cm)

If you like my models, please support me on Patreon (link in profile). your financial support will help me continue to help the defenders of Ukraine . thanks for the help everyone.

Downloads
1,307
Likes
48
Rating
5
P
PrintablesMatelier

Fishing Softbait Shad Mold 9cm

3D printable mold to pour silicone 9cm Westin clones YOURSELF! No supports needed. Would recommend ABS/ASA at the minimum to ensure quality pouring without destroying the mold. You can print either the master itself to make your own mold…

Downloads
1,201
Likes
499
Rating
0
P
PrintablesLaminate

MGN9C Rail and Carriage

A super cheap, super decent alternative to MGN9C rails. The carriage size is nominal, scaling to 101-103% will work depending on a list of factors. I used 102% with PLA and received favorable results. Once assembled and the carriage can…

Downloads
844
Likes
134
Rating
4.43
P
PrintablesLloyd Summers

Food / Freezer Bag Clip - 9cm (90mm) and 14cm (140mm)

This is a super handy clip for the pantry, freezer and just other bags. We use them for chip bags, and freezer stuff. I print them using PLA+, and we have clips that we are still using that have lasted 6/7/8 years in the freezer. And are…

Downloads
809
Likes
85
Rating
4.5
P
Printablesthrutheframe

Heat Insert Press (mgn9c remix)

Description It was high time I build a brass insert press rig. There were several designs available on Printables and Thingiverse, but me being me, I had to design my own over-engineered version with the parts that I have at my disposal.…

Downloads
738
Likes
268
Rating
4.86
P
PrintablesJohnGol

Mini Pocket Slide Box - extended the 5cm box -> 6cm 7cm 8cm 9cm 10cm

I extended the 5cm box to make it 6cm, 7cm, 8cm, 9cm, and 10cm, respectively. I didn't change the other dimensions.

Downloads
693
Likes
67
Rating
5
P
PrintablesABG3D

3D Printable MGN9C rails and guide block

About this rail: I took inspiration from Gulsifer's models, but they ended up being too loose a fit with how my Ender 3 V2 has been set up, so I went and found the technical drawings for the MGN series rails and designed my own MGN9C…

Downloads
460
Likes
43
Rating
5
P
PrintablesGulsifer

Dragon Burner Mount MGN9C for the Rook

This is a mount for the rook MGN9C carriage This will require 2 M3 heat inserts in the holes

Downloads
361
Likes
67
Rating
5
P
Printablesdmuva

19cm network rack additional mounts

Added few more mounting plates: Intel 7th gen NUC, unscrew front screws and pull into the mount, then screw them back to fix. TP-Link managed switch TL-SG108P(E) mount. Additional plate to mount power bricks and wires.

Downloads
353
Likes
59
Rating
5
P
PrintablesGulsifer

150mm, 200mm & 250mm MGN9C Linear Rails

I hand meshed this with calipers and redesigned it to have tolerance. I have also printed them multiple times to test. Print the parts on the flat bottom side. You will need to reorient it in your slicer.

Downloads
339
Likes
47
Rating
4.67
P
Printablesbigtallbill

Slightly Taller 9cm Case

Prints exactly the same as the original, it's just taller :)

Downloads
321
Likes
28
Rating
5
P
Printablesmobiobi

XJ99C Noctua NF-A12x25 Mod

This is my best fan design, to date. Recommend 0.15mm layers or smaller, any filament, should print without support but might need a brim. The tail might improve flow ~10%, the intake only about ~2%. Graph shows a rough system curve for…

Downloads
297
Likes
48
Rating
5
P
PrintablesspectrexFPV

CustomFPV Camera Mount [c03 and 199c]

Remix of CustomFPV and Aerial Outlaws' Camera Mount for tiny whoops Features Available Angles: 10°-60° @ 1° interval apart Mounting Pattern: 25.5x25.5mm AIO/Whoop mount Weight: 0.5±0.1g No 42° angle. Why? Because we have 42.5° Note: A…

Downloads
295
Likes
24
Rating
5
P
PrintablesJemison

Voron V0.2 MGN9C X-Carriage with Endstop

V0.2 MGN9C X-Carriage with Endstop

Downloads
283
Likes
30
Rating
5
P
PrintablesZen3Dlab

MGN9C/MGN12H adapter

required hardware: 4pcs FHCS M3 5mm 4pcs M3 square nut (5,5mm x 5,5mm x 2mm) Zen3D

Downloads
275
Likes
27
Rating
5
P
PrintablesFanasia Lab

NVIDIA Tesla V100 SXM2 9cm Heatsink Fan Shroud for 80mm Fan

This model modified the original fan mounting part to fit 80mm fan, which allows more air flow to make the GPU even more cooler. Also the inner has been enlarged a little for the shrinking of ABS prints. The original model was created in…

Downloads
262
Likes
14
Rating
0
P
PrintablesDan

Simple 9cm bracket shelf

I needed a very simple 9cm shelf bracket, sooo, I made it ! If you print it please post a make and give feedback. Thanks

Downloads
232
Likes
39
Rating
5
P
Printablesthall72
Downloads
228
Likes
39
Rating
0
P
PrintablesRyper3D

Prusa MINI upgrade X axis to linear rails MGN9C

This is our second mod for Prusa MINI, a mod for upgrading X-axis to linear rails, tested with an approved self-test. We can use stock extrusion system or Orbiter :D BOM Rails Hiwin (ideally) MGN9C 280mm Printed parts from this mod…

Downloads
215
Likes
61
Rating
2.5
P
Printablestato_713

Xiaomi Redmi 9A & 9C & 9 Activ case

Some of the models are designed for rigid materials and others for flexible ones. The models materials are not interchangeable , so pay attention to the file names. If you have any request on the design just ask me. For other phone cases…

Downloads
207
Likes
4
Rating
0
P
PrintablesBlurking

Toroidal 9cm Fan Blades

After accidentally breaking this old PC fan I decided to attempt to fix it with a quieter design but still have decent airflow. You can probably do better, but I'm happy with it.

Downloads
205
Likes
23
Rating
0
P
PrintablesAmyRayn

Planter Blumentopf 9cm

Verfügbar auch unter:…

Downloads
202
Likes
26
Rating
0
P
PrintablesAmyRayn

Planter Blumentopf 9cm

Auch verfügbar unter: https://www.etsy.com/de/listing/1643464244/blumentopf-9cm-3d-gedruckt-zion

Downloads
185
Likes
28
Rating
0
P
PrintablesPatrick

Hb9cv antenna

Mor infos: http://oe1iah.at/Hardware/Antennen/70cmHB9CV.shtml#close

Downloads
181
Likes
35
Rating
0
P
PrintablesMaFe1991

Comfee-MK-MPPH-09CRN7-Zuluft (3-Schlauch-System)

(FILE-UPDATE → printed and tested) NICHT VERWENDEN BEI : Kamin, Gastherme oder anderen Gefahrenquellen bezgl Kohlenstoffmonoxid im Raum. Der Einsatz eines Rauch- und CO-Melder s wird an dieser Stelle auch empfohlen wenn sich derartiges…

Downloads
171
Likes
6
Rating
0
P
Printablesthall72
Downloads
165
Likes
30
Rating
5
P
Printablesmirabatek

ToDo List (Checklist) Stencil for 9x9cm notes

ToDo list (checklist) stencil for 9x9cm paper note block. You can choose square or circle checkboxes. There are two versions with 8 and 10 items.

Downloads
147
Likes
29
Rating
5
P
PrintablesBasementLAB

Photo Frame Polaroid - Picture Frame - 9x9cm (10,2x12cm) - Hexagonal Shape - Portafoto per Polaroid

Photo Frame - Picture Frame Polaroid 9x9cm (10,2x12cm) - Hexagonal Shape - Portafoto per Polaroid Update 07/05/2025: added Hex Polaroid 9x9 Frame_1 REV_C.stl, geometry cleanup Resize to adjust dimension If you download/enjoyed this file,…

Downloads
145
Likes
39
Rating
0
P
PrintablesTIMBOLOGIST

SOUTH BEND LATHE MODEL 9C ( 1937-1940 ) THREAD CHASING DIAL

This is a replacement part for a South bend lathe model 9C that I just received, this part was worn out so made a replacement out of ABS PLA may be stronger. I made it in 2 halves and glued them together with ABS juice. The lathe has a…

Downloads
144
Likes
13
Rating
5
P
PrintablesRice_Bowl

Whoop Canopies [Runcam Nano 3, Foxeer Razer Pico, LDARC 199c V2.1]

The Runcam Nano 3 bracket is the same as the one used with the Mobula Canopy which attaches to the back of the Nano's backside and is attached to the canopy via 2 screws. Normally, you would print this in a rigid filament such as PLA. The…

Downloads
140
Likes
8
Rating
0
P
Printablessegrwolf

16MM tube grow tent 9cm lightwaight shelf

Lightweight and thin version of the shelf for a 16mm pipe

Downloads
139
Likes
15
Rating
0

Rear Wheel Bearing Cap Cover For Audi A1 A2 A3 8L 8P 8V A4 B6 B7 Q2 Q3 TT 1J0501249C

Snug fit. Better use PETG, because bearing may become hot, when alot of breaking.

Downloads
131
Likes
28
Rating
0
P
PrintablesAnollya

VESA Adapter - Samsung 32UR59C

VESA Adapter for Samsung 32UR59C Print it with PETG Layer 0,2 Infill ~20% 4 perimeter temperature ~245 C° Category: Parts

Downloads
126
Likes
15
Rating
5
P
PrintablesTIMBOLOGIST

SOUTH BEND LATHE MODEL 9C ( 1937-1940 ) CHANGE GEARS PART 2

This is the second part of a set of change gears for cutting threads on an 8TPI imperial leadscrew lathe these was designed for a South Bend lathe model 9C. The teeth have 14.5 degree pressure angle The gear has a DP of 18 The module is…

Downloads
118
Likes
15
Rating
0
P
Printableskaje

Circuit Board Holder - TI-LaunchXL-F280049C

[Update March 26, 2020 - see note below] This was made for my build of the [clough42] Electronic Lead Screw project. Use with #4 x 3/8 sheet metal screws (#4 ~= 3mm). This is a simple frame to hold the TI-LaunchXL-F280049C for use on the…

Downloads
117
Likes
6
Rating
5
P
PrintablesSimon Ks

Franklin Method Ball Alternative, Fitness Massage Ball, 9cm, TPU

Rotate the model to stay flat on one of the nobs. Print settings TPU 95 material 20% Cubic infill 3 walls normal supports

Downloads
113
Likes
9
Rating
5
P
Printablesthall72
Downloads
111
Likes
14
Rating
0
P
PrintablesAron

MGN9C Rook Carriage for MiniSB / Dragon Burner

The original MGN9C Carriage would hit the X Rail mount from the Rook design. Chopped off the back to avoid collision. Used this to mount my Dragon Burner to my Rook 2020 Model.

Downloads
111
Likes
13
Rating
0
P
PrintablesL.T

AEG Comfort 6000 AXP26U339CW – Dual Hose Conversion Adapter

This adapter is designed exclusively for the AEG Comfort 6000 AXP26U339CW. Compatibility with other AEG models or portable air conditioners is not guaranteed , even if they appear to have a similar housing. The adapter converts the…

Downloads
109
Likes
2
Rating
0
P
PrintablesMrStolarsky

19cm Mini Server Rack - Wall mounted back

I needed to hang the mini rack off the wall and modified this to accept 4 screws. The holes are 4mm so any reasonable size screw will work. The shelf visible in my pictures is this on from Moshe. Check out my other models for Home…

Downloads
106
Likes
40
Rating
0
P
Printableszy l

voron 0 X Carriage for MGN9C

X Carriage for MGN9C,The installation position of the tool head is not affected

Downloads
101
Likes
18
Rating
5
P
Printableshk_man

Heat Insert Press (mgn9c remix) - soldering iron bracket remix

Soldering iron bracket remix for blue solder iron with heat set insert tips. The small hole is used to mark the bottom. Please pay attention for parts orientation. Screws and fixtures for printed parts m3 Nuts , 4pcs. m3 Screw x8 (or…

Downloads
100
Likes
23
Rating
0
P
Printablesmobiobi

XJ99C Fan Mod for @Leander's Fan Showcase

Really like Leander's model, tweaked one of my fans to work in it. Showed a peak of 4m/s (1000ft/min) flow with it clamped down, and some silly amount of cranking. Decided to bypass the rachet mechanism, so it's mounted direct to the…

Downloads
97
Likes
19
Rating
0
P
PrintablesMrStolarsky

19cm Mini Server Rack - Home Assistant Yellow Mount

This is a front plate or a mount for the Home Assistant Yellow for the Blinkinlabs 19cm Mini Server Rack. It uses the two front screws from the bottom of the Yellow. The hole to the right is for the cables if you decided to route them to…

Downloads
95
Likes
21
Rating
0
P
PrintablesWadim

NVR box for board 9CH XM8536E

The case is made for a cheap popular video surveillance board from Aliexpress (46х118mm 9CH NVR). To store the recording, I use an old solid-state hard drive without a case 65x42 mm. This model does not use screws. Assembly sequence:…

Downloads
94
Likes
7
Rating
0
P
Printableskadous

Bicycle holder Xiaomi Redmi 9C / Držák mobilu Xiaomi Redmi 9C na kolo

Bicycle holder Xiaomi Redmi 9C is a simply holder for mobile phone for mounting on handlebars of bicycle. Is it posiible insert in the holder the phone with a rubber cover. The holes in the holder are to be able the phone charge and…

Downloads
91
Likes
9
Rating
5
P

Voron Stealthburner MGN9C X-Carriage Plate

This is a fully modified Voron Stealthburner mount that allows you to put it in for example: Rook 2020 Modified Voron 0 Or any 3d printer based on MGN9C

Downloads
89
Likes
5
Rating
2
P
PrintablesDZa

Rookery Belt Cradle reinforced [MGN09C]

The original part has already broken twice in the same place. Both times after about a month of use. (With normal use --> approx. 20h per week printing time) I then decided to make a few minor changes to the original part. I added a…

Downloads
86
Likes
10
Rating
5
P
PrintablesDan

My Customized Belt Version 2.2 109cm

Customized version of https://www.thingiverse.com/thing:3592064 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=3592064 Instructions Using the following options: length = 1099 Category: Accessories

Downloads
85
Likes
16
Rating
0
P
PrintablesBasementLAB

Photo Frame Polaroid 9x9cm (10,2x12cm) - Hexagonal Shape Type Modulare - Portafoto modulare per Polaroid

Photo Frame Polaroid 9x9cm (10,2x12cm) - Hexagonal Shape Type Modulare - Portafoto modulare per Polaroid If you download/enjoyed this file, please leave a like - Thx

Downloads
85
Likes
26
Rating
5
P
PrintablesWilliam Brack

mk1 Subaru Forester SK Angled Tweeter Bracket Dash (Midrange) S2S69c

Subaru Forester SK Angled Tweeter Bracket Dash (Midrange) for the alpine S2S69c

Downloads
83
Likes
10
Rating
0
P
Printableslolthekidison

Voron Trident MGN9C

Keeps everything basically the same just adjusted for mgn9c rails. XY Joints use the stock top plate. I don't know why you'd need this mod but here it is.

Downloads
82
Likes
19
Rating
0
P
PrintablesWatchmakerT

Adjustable Feet for Furniture up to 15cm / Einstellbarer Fuß für Möbel von 9cm bis 15cm

Ein einstellbarer Fuß für Möbel, dieser wird mit 3 Schrauben an dem Möbelstück befestigt und kann dann mit der großen M30 Schraube in der Höhe eingestellt werden. Lässt sich einfach drucken mit PETG oder PLA. Das Innenteil ist 3% kleiner…

Downloads
79
Likes
9
Rating
5
P
PrintablesTGS22

Ender 2, 3, CR10, CTC A10S E3Dv6 Hotend Mount and IGUS TWE 04-12, MGN9c Rail Mount

English: Tested and in action Igus Linear Rail Type TWE-04-12 = MGN9C Advantage of the Igus linear guides is that they run lubricant-free and quietly, the model TWE-04-12 is also adjustable and thus the bearing play can be reduced so that…

Downloads
77
Likes
11
Rating
0
P
PrintablesKuryMakesThings

Printed MGN9C for Foam Blasters

Printed MGN9C rail but with the hole positions matching the HIWIN 155mm long rail and the Aliexpress vendor 150mm long rail. 7.5mm and 5mm hole distance from edge, respectively. This is intended for the Crush foam blaster to reduce…

Downloads
76
Likes
11
Rating
0
P
PrintablesJpsaila

Voron 0.2 carriage and motor frames modified for MGN9C rail

Modified X carriage and A/B motor drive frames to use an MGN9C rail on the x axis. The hotend assemby now sits 2mm higher. since the MGN9C carriage is 20mm wide instead of the 17mm on the MGN7H the A/B motor frames have also been modified…

Downloads
76
Likes
12
Rating
5
P
Printablesrickening

Sturdy Ikea Metod Leg (9cm - 15cm height adjustable)

The original ikea legs for the IKEA Metod kitchen cabinets seemed too flimsy and expensive to me, so i designed these as a 3d printable replacement. Has successfully been holding up my entire kitchen for three months now. One height…

Downloads
75
Likes
30
Rating
0

Sorting tray or Token tray with funnel - 9cm

Easy to print token tray. Approx 9cm square and 1.5cm high.

Downloads
74
Likes
10
Rating
0
P
PrintablesMINI_EGG

mgn9c with orbiter v2 in voron v0

voron v0 X_Carriage for mgn9c with orbiter v2 BOM: M3x6 - x3 M3x8 - X1

Downloads
71
Likes
17
Rating
5

Ender 3 V3 SE Toolhead Carriage MGN9C

This is a great model, but I found some problems that I didn't like so I decided to fix them V1 - has a problem, it's touching the rail V2- fixed touching rail problems

Downloads
70
Likes
23
Rating
0
P
PrintablesBlackFury

Super Simple Tray (17x9cm)

I needed a pen tray that fits on the Prusa Mini bed and under my monitor. Super simple design with sizes 17cm by 9 cm. You can use it to store whatever knickknacks you have laying around.

Downloads
70
Likes
8
Rating
0
P
PrintablesLanka With

Samsung JOG button for LS49CG932SNXZA

My [Samsung 49 inch Odyssey 0.03 ms 240 Hz OLED G9 Gaming Monitor (LS49CG932SNXZA)] JOG button / joystick crapped on me . It seems to be a common issue[…

Downloads
70
Likes
0
Rating
0
P
PrintablesNordenia

Contenedor de 6 posavasos para posavasos de 9cm de diámetro / Container of 6 coasters for 9cm diameter coasters

Contenedor de 6 posavasos para posavasos de 9cm de diámetro / Container of 6 coasters for 9cm diameter coasters

Downloads
68
Likes
7
Rating
0

turntable 19cm

turntable 19 cm in diameter, with a 608z bearing in the center. I made this little tray to make scanning easier with the Creality Scan Ferret Pro 608zz : https://s.click.aliexpress.com/e/_DBGj5nZ

Downloads
68
Likes
12
Rating
0

Kitchen drawer organiser 31x39cm

Quick design of a Kitchen drawer organiser i made, because none i could find truly fit my kitchen drawers

Downloads
67
Likes
10
Rating
0
P
PrintablesTIMBOLOGIST

SOUTH BEND LATHE MODEL 9C ( 1937-1940 ) CROSS SLIDE NUT

This is a replacement part for a South bend lathe model 9C that I just received, this part was worn out so made a replacement out of ABS PLA may be stronger. I made it as a single piece model printed in the orientation as in the stl file.…

Downloads
67
Likes
7
Rating
0
P
Printablesmayday

Pioneer D-Series Tweeter Mount Bracket (TS-D65C & TS-D69C)

Mounting bracket for Pioneer D-Series tweeters (fits TS-D65C & TS-D69C). The two pieces are made to nest into one another, fully encasing the tweeter body. Made originally for a 2001 Mazda MX-5 Miata, this mount can be resized to fit any…

Downloads
66
Likes
5
Rating
0
P
PrintablesScott Adams

Unifi Lite 8, USG, and SB8163 19cm network rack mounts

They should all fit in with friction. The SB8163 gets hot so give it plenty of room and air flow. For the Unifi Lite, use a zip tie. It works ok.

Downloads
64
Likes
7
Rating
0
P
PrintablesHOLOR

Halter für Gothic Bird Feeder auf 9x9cm Pfosten/ Holder for Gothic Bird Feeder on 9x9cm pole

Mit diesem Halter kann der Gothic Bird Feeder von 3DMDesign auf einem 9x9 cm Pfosten montiert werden. Um zu verhindern, dass das Futterhaus sich auf dem Halter dreht, habe ich ihn mit doppelseitigem Klebeband festgeklebt. Am Futterhaus…

Downloads
64
Likes
8
Rating
0
P
PrintablesSB

Kleiner süßer Drache mit Aufhängung - Breite ca. 19cm Länge 12cm

Kleiner süßer Drache mit Aufhängung - Breite ca. 19cm Länge 12cm Auch beim Druck mit nur einer Farbe ergeben sich tolle Farbnuancen aufgrund der geringen Schichtanzahl. PLA / PETG 0,2mm oder 0,1mm

Downloads
63
Likes
8
Rating
0
P
PrintablesTIMBOLOGIST

SOUTH BEND LATHE MODEL 9C ( 1937-1940 ) CHANGE GEARS PART 1

This is the start of a set of change gears for cutting threads on an 8TPI imperial leadscrew lathe these was designed for a South Bend lathe model 9C. The teeth have 14.5 degree pressure angle The gear has a DP of 18 The module is 1.411…

Downloads
62
Likes
5
Rating
0
P
PrintablesWilliam Brack

mk2 Subaru Forester SK Angled Tweeter Bracket Dash (Midrange) S2S69c 50 degrees

a steeper angled part (50 degrees) to improve the directionality of the tweeters, with the sweep starting on the bottom surface to prevent touching the windscreen. best to print this in PETG or ABS, as with direct sun, it could get quite…

Downloads
59
Likes
9
Rating
0
P
PrintablesClement89

adaptateur MGN9C to MGN12H

ENGLISH This is MGN9C to MGN12H din rail adapter It was necessary for me to mount my rail on my Ender 3v2 with the model offered by SirStorm FRANCAIS il s'agit d'un adaptateur de rail din MGN9C a MGN12H il m'a était nécessaire pour monter…

Downloads
58
Likes
7
Rating
0
P
PrintablesVIFROSTGFX

Voron Trident MGN9C For Dragon Burner

This is a modified version of the original Chirpy2605 MGN9H Dragon Burner mount , adapted to support MGN9C linear rails. The mount is fully compatible with Voron V1 and V2 setups and retains all essential alignments and dimensions of the…

Downloads
58
Likes
5
Rating
0
P
PrintablesJoaelso

Spanbaum / Weihnachtsbaum 9cm / Christmas tree 9cm

Ich habe den Baum mit PLA in mattem Hellbraun gedruckt, wodurch er aussieht, als wäre er aus Holz gearbeitet. Der Baum ist 9 cm hoch und besteht aus 6 Teilen und einem Fuß. Nach dem Druck müssen die Teile noch zusammengeklebt werden. In…

Downloads
57
Likes
6
Rating
0
P
PrintablesspectrexFPV

LDARC 199c camera mount/canopy [Improved Complete Set]

LDARC 199c camera mount The design combines the idea of portofpv 's Ldarc 199c camera whoop canopy and brighfive's Bribrain LowRider version requested by the legendary TDog. Neither models were used as references. Features: Available…

Downloads
56
Likes
5
Rating
0
P
Printableshlim29

7x9cm case for prototype PCB

Print settings Tested with PETG. Should work with PLA 20% infill No supports 0.4mm nozzle Features 10mm height Vent holes on the bottom 1mm sunk border for a snap fit

Downloads
56
Likes
1
Rating
0
P
PrintablesCarlos

Ldarc 199c camera whoop canopy

A canopy for the Ldarc 199c camera. It is raised to help reduce impacts on the flight controller and hopefully last a bit longer due to crashes. If more angles are needed please let me know and I will model it up. Update: thickened up the…

Downloads
54
Likes
2
Rating
5
P
PrintablesTIMBOLOGIST

SOUTH BEND LATHE MODEL 9C ( 1937-1940 ) 127/100 METRIC TRANSLATION RING GEAR

This is a Metric Translation gear for cutting metric threads on an imperial leadscrew lathe this was designed for a South Bend lathe model 9C. photo is of 80/63 translation gear as I don't think this 127/100 would fit my present set up…

Downloads
53
Likes
5
Rating
0
P
PrintablesWilliam Brack

mk3 Subaru Forester SK Angled Tweeter Bracket Dash (Midrange) S2S69c recessed

a steeper angled part to improve the directionality of the tweeters, with the whole thing recessed into the recess of the car to minimise how much room they take up. my print was done with PETG in matt black, using tree supports in prusa…

Downloads
52
Likes
12
Rating
0
P
PrintablesPeter Ennist

Training Knuckles Ver 9C

Another Set of TRAINING Knuckles Ver 9C One Piece

Downloads
52
Likes
12
Rating
0
P
PrintablesJimmy D

Heat Insert Press (mgn9c remix)

I wanted a place to store extra tips and changed the base to accommodate. I was inspired by a similar design but I can't remember where I saw it. Forgot to mention, I tapped the 2020 extrusion for an M6x1.0 and ran a bolt through the base…

Downloads
52
Likes
20
Rating
0
P
PrintablesAmyRayn

Planter 9cm

Another planter with an inner diameter of 9cm.

Downloads
51
Likes
7
Rating
5
P
PrintablesRenátó Kulman

VZbot MGN9C Y gantry adapter no support

Top part is the same, can be dowloaded from the github link. It only support countersunk screws now and only MGN9C carriage.

Downloads
51
Likes
7
Rating
0
P
Printablescuiviemen

Stealth Press ZERO TS100 arm using MGN9C

Description: Stealth Press ZERO TS100 arm to fit on MGN9C carriage. Note: The M3x8 x4 are too long to screw the arm to MGN9C (unsure if is problem in original design too) so you have to use 4x M3x6. Also my T100 from Miniware is too large…

Downloads
50
Likes
7
Rating
0
P
PrintablesCarlos Oliveira

Dual Wine Bottle Holder – Horizontal Rack for 2 Bottles | Minimalist Display & Storage (3cm/6cm/9cm Versions)

This is the first 3D model I've ever shared , designed in Fusion 360! It's a horizontal wine bottle holder for two bottles , stacked one above the other, keeping the cork in contact with the wine and the label clearly visible — perfect…

Downloads
50
Likes
12
Rating
5
P
Printablesjeemartin

Slotit Nissan R89C 1/32 chassis

Slotracing for BL motor and Slotit Nissan R89C 1/32 body

Downloads
50
Likes
5
Rating
0
P
PrintablesAmyRayn

Organic Planter 9cm

Made for a 90 mm plant.

Downloads
50
Likes
7
Rating
5
P
PrintablesDaniel433

MGN9C Generic Arm for Stealth Press ZERO

No support is required as long as model is positioned as in the last picture.

Downloads
49
Likes
6
Rating
0
P
Printablesorb1t

simple narrow 9cm spool holder

This is a remix of my filament stand / spool holder to make it even more narrow and fit into my drybox. you can either use my bearing axis from the main post or this simple axis without bearings, all parts are interchangeable. How to…

Downloads
49
Likes
4
Rating
0
P
PrintablesMrBramme

Ikea Äpplarö hangar for Ikea Fejka (9cm) plants

Some hangars to hang the Fejka plants from an Äpplarö rack. As shown in the picture, they need a gentle nudge to "clip" over into the rail but fit nice and snug. I printed in Galaxy black PETG Sorry for the rotated pictures ... :) Print…

Downloads
48
Likes
12
Rating
0
P
PrintablesColLynch

Asus MB169C+ Stand

Set of Legs to hold Asus MB169C+ Monitor. Designed for use with Dell Latitude 5591 Laptop, because the included folding cover/stand is a nice cover, but a terrible stand. One leg has an opening to allow the USB-C cable connection. Holds…

Downloads
48
Likes
4
Rating
0
P
PrintablesMichal Janout

Skoda wheels Logo ⌀9cm

Skoda wheels Logo ⌀9cm if you want you can make it smaller and fit it as car logo. Model was colored with marker

Downloads
48
Likes
6
Rating
0
P
PrintablesMr_Kes

Pull-start handle for 2-stroke 47cc/49cc engine

Pull-start handle for 2-stroke 47cc/49cc engine. Use M3 nuts and bolts to assemble it. Print Settings Printer Brand: Creality Printer: Ender-3 v2 Rafts: No Supports: No Resolution: 0.3mm Infill: 50% Filament: gembird PLA+ black Notes: For…

Downloads
48
Likes
9
Rating
5
P
Printablesexen904

Additional Mounts for the 19cm Rack

Created some additional mounts for the 19cm Rack, following the original dimensions. Except for the Optiplex Mount they all hold themself and have locations for the originally designed wallmount screws. For the screws I used M3…

Downloads
47
Likes
2
Rating
0