Search results: a20

Sort order

240 models

P
Printablesredangel1984

Universal Frame Stiffener for Geeetech A20, A30; Creality CR10, CR10s; Tronxy, Sovol etc.

If you like it feel free to leave a comment or even better,buy me a "coffee": https://www.buymeacoffee.com/redangel1984 If you are looking for bracing/stiffener for your printer which uses 2040-AluminiumExtrusions for the frame, look no…

Downloads
739
Likes
107
Rating
5
P
PrintablesHeli3D

Bose A20 caddy

a caddy for your Bose A20 com box. holds 2 spare AA batteries and fits on snuggly

Downloads
367
Likes
30
Rating
5
P
PrintablesBrian Amato

Lominie A20 Tank Clamp Sleeve

While I'm sure it was fine, the idea of metal on glass made me uncomfortable, especially under a clamping load. I also noticed there's potential for water to find its way out of the tank via capillary action and I wanted to prevent that…

Downloads
10
Likes
0
Rating
0
P
Printablesmakitprojects

OpenRC Tractor MK3 TEA20

The new OpenRC Tractor is finally here!! It's been almost two years since I started working on this new MK3 TEA20 project. Now, after hundreds of hours of design, test, print, redesign… it’s finally here and all the hard work has paid…

Downloads
4,599
Likes
876
Rating
4.94
P
PrintablesNotForEveryone

Subaru FA20 & EJ Oil Funnel

This is a screw on oil funnel for the FA20 engine in the 2015+ Subaru WRX. It also works on a 1997 JDM ej20k so this very likely works on any Subaru engine out there. Just take the cap off and this fits into the oil filler neck. This…

Downloads
2,137
Likes
229
Rating
5
P
Printablesmakitprojects

OpenRC Tractor MK3 TEA20 XL

Update 12-01-2025 Part 40a was not the final version and it didn't fit, now is corrected. Part 4-2a (standard fit) was not correct, now is corrected Added parts 4-2a and 4-2b with even higher tolerance (loose fit). Update 08-01-2025…

Downloads
1,542
Likes
302
Rating
5
P
Printablesmrusk

Bose A20 Aviation Headset Control Module Holder

Various on-board holders for Bose A20 Control Modules. The modules fit in perfectly and are aligned with the top layer of the holder for optimal accessibility of the keys and volume knobs. Also fits for the Bluetooth Version. Fix in a…

Downloads
1,219
Likes
44
Rating
5
P
Printablestato_713

Samsung Galaxy A20 & A30 & A30s a205 a305 a307 case

Originally published here: Samsung Galaxy A20 & A30 & A30s a205 a305 a307 case by tato_713 - Thingiverse This case is for the Samsung A20 phone (models started with a205), for the A20s (a207 models) look here . This case was tested on the…

Downloads
850
Likes
20
Rating
5
P
PrintablesITG Gear

3D casing model files for Lenovo M90q/P340 tiny with RTX A2000

Enhance your Lenovo M90q with this custom-designed 3D case tailored for the RTX A2000. This 3D model file is designed to optimize airflow, maintain compact size, and enhance the overall aesthetics of your setup. The model ensures…

Downloads
775
Likes
48
Rating
5
P
Printablesmakitprojects

OpenRC Tractor MK3 TEA20 platform trailer

This is a simple platform trailer to carry your TEA20 tractor. For the hitch, you have two options depending on the hitch you installed on your TEA20. This trailer is not RC controlled, it is manual, but it works quite good.…

Downloads
698
Likes
91
Rating
5
P
PrintablesTheDIYGuy999

Accessories and improved parts for the OpenRC Tractor MK3 TEA20 from makitprojects

The tractor is awesome, but I decided to improve some parts. They are provided as STEP files (better quality than STL)

Downloads
606
Likes
81
Rating
5
P
PrintablesThinhDora

NEC Mate MC-3 + RTX A2000 custom closure and bracket

Brass-nut holes' size is 4.7mm (diameter) x 6mm (depth). You can insert M3x4x5 or M3x6x5 brass nuts.

Downloads
562
Likes
60
Rating
5
P
Printablesjuricabi

SAMSUNG GALAXY A20E TPU CASE

Bottom is flat. Case is tested. Best printed slowly in TPU.

Downloads
549
Likes
15
Rating
4
P
PrintablesFlaku34

LGA2011 to am4 cpu cooler adapter

The model is an adapter for stock AMD am4 cooled to fit onto the LGA2011 style socket. I used mine on the HUANANZHI X99-8MF motherboard. It simply bolts to an Intel socket with four M4 bolts and AMD cooler screws directly to the adapter.…

Downloads
471
Likes
40
Rating
5
P
Printablesmakitprojects

OpenRC Tractor MK3 TEA20 hitch

This is a realistic working rear arm controlled hitch. It pairs with the OpenRC Tractor TEA20 platform trailer. List of parts and materials can be found in the project BOM spreadsheet .

Downloads
456
Likes
91
Rating
5
P
PrintablesZach

CRJ Series Bose A20 / A30 headset controller holders

Keeps those pesky control bricks off your lap and out of the way while you're flying! (CRJ series) Variations include the A20 and A30 series controllers and hooks to go over the side of the cubby, either on CA or FO side, (both work)…

Downloads
419
Likes
15
Rating
5
P
PrintablesPrintLapse

Bose A20/A30 Aircraft Radio Holster

An easy way to mount your Bose Radio in the cockpit.

Downloads
380
Likes
18
Rating
0
P
Printableswanderer_76

Rear tyres - OpenRC Tractor MK3 TEA20

The OpenRC MK3 Tractor is a great model. Just about the only thing I didn't like on it though are the rear tyres. To me, they didn't quite have the look of “real” tyres. I've printed them out of PLA. These are printed in two pieces that…

Downloads
363
Likes
52
Rating
5
P
PrintablesMINILab3D

Fan duct geeetech a20m

Fan duct geeetech a20m

Downloads
351
Likes
19
Rating
4.5
P
PrintablesR1CDM

LGA2011 Narrow AM4 bracket

There are two options, the first is a copy that can be bought for example on Aliexpress, but for my top flow cooler it did not fit, one wall interfered, so in the second version it was removed, but the rigidity of the structure was not…

Downloads
324
Likes
13
Rating
5
P
PrintablesITG Gear

RTX A2000 OCuP4 V2 Enclosure Oculink eGPU dock

Transform your tiny/micro PC into a high-performance powerhouse with our RTX A2000 OCuP4 V2 Enclosure designed for OCuLink eGPU setups. This compact and efficient enclosure is perfect for gaming, professional work, and any GPU-intensive…

Downloads
320
Likes
29
Rating
0
P
Printableswanderer_76

Back Blade - OpenRC Tractor MK3 TEA20

Simple little print. All the hardware is 3mm (if you've built the tractor no doubt you have enough hardware left over) The blade can be set to push or pull and also locked in at an angle left or right depending on the need. While it's not…

Downloads
307
Likes
40
Rating
5
P
PrintablesFrittenpit

Noctua NF-A20 PWM Fan Shroud

simple Fan Shroud for the NF-A20 with 170x170mm and 154x154mm hole spacing

Downloads
301
Likes
34
Rating
5

LGA2011-3 to AM4 bracket mount

LGA2011-3 to AM4 bracket mount. Suitable for stock AMD coolers. PLA may melt, use ABS, PetG, or other high temperature plastics. 100% infill is appreciated (3+ perimeters). Model is high loaded.

Downloads
292
Likes
10
Rating
0
P
Printableschal

Atomstack Laser X20 A20 S20 Pro cable chain mount with screws and heatsets

The mounts are work in progress. I used a 10x20 cable chain to fit the cables and the hose of the air assist: https://www.amazon.de/dp/B08R1LFZTN?psc=1&ref=ppx_yo2ov_dt_b_product_details Used these belt clamps (one especially on the X…

Downloads
289
Likes
20
Rating
0
P
Printablesredangel1984

Dual Z Adjustable Bracket for Geeetech A10 / A10M / A20 / A20M + Short Firmware Instructions

Update 09.01.2020: I updated the lead screw nut hole to accept a wider range of lead-screw nuts, before the diameter was 22.0mm and now in V2 its 22.6mm. I also added some minor tweaks overall. (check out the gif on the bottom of the…

Downloads
282
Likes
26
Rating
4.67
P
Printablesswoosh

Noctua NF-A20 Desk Fan

A housing to create a silent desk fan out of a Noctua NF-A20. Bill of Materials ~320 g of filament AF-A20 fan, “5V” or “5V PWM” variant (comes with a Molex-to-Molex extension and a Molex-to-USB adapter cable) 8 x M4x40 SHCS screws (for…

Downloads
254
Likes
25
Rating
0
P
PrintablesToneDreams

200mm Desk Fan Stand (noctua 200mm NF-A20)

Model Name: 200mm (Noctua) and 120mm Fan Stand using rubber mounts – 25° Angle (Mini Build Plate Friendly) Summary: A compact fan stand designed for 200mm Noctua fans, angled at 25°, and sized to fit within the 170mm build volume of a…

Downloads
218
Likes
17
Rating
5
P
PrintablesViktor Nieman

W201 central locking for trunk ( A2017500092 )

I made a replacement part for the central locking of a w201 trunk. Orginal part number (A2017500092) I printed it using my X1 CC with PA6-CF (100% infill) laying flat on the long part. works perfect so far. you may have to scale it…

Downloads
213
Likes
19
Rating
0
P
PrintablesGregory Ketell

Bose A20 control mount

Bose A20 (TM) control box mount. Attach the dovetail mount with the curve pointed up either by drilling and tapping for flush-fit screws or by using your favorite double-sided adhesive. Then slide the mount itself onto the dovetail. If…

Downloads
203
Likes
14
Rating
0
P
PrintablesRes16

Afterburner Mount for Creality Ender 3 / Geeetech A10, A20, A30, ...

This is a Afterburner-mount for a Ender-3 style printer. The mount does not use the original metal bracket, but the excentric nut is necessary. I have it running on my Geeetech A10 and it does it's job quite well. Feel free to give some…

Downloads
197
Likes
47
Rating
5
P
Printablesmakitprojects

OpenRC Tractor MK3 TEA20 license plate

You can choose option A (fender) or option B (behind seat). In both options there is a blank license plate so you can import it to your favourite 3d modeling software and personalize it. Option A: Fender If you choose to put your license…

Downloads
196
Likes
48
Rating
0
P
Printablesjuricabi

SAMSUNG GALAXY A20 TPU CASE

Bottom is flat. Case is tested. Best printed slowly in TPU.

Downloads
195
Likes
6
Rating
5
P
PrintablesAlex Fanthome

Noctua NF A20 Fan Duct

Taking inspiration from: https://www.printables.com/model/268401-noctua-desk-fan But re-modelled for the A20 (200mm Fan) You can either print with the fan arm “plugs”, or if you skip the first 2mm, you can skip those plugs and print…

Downloads
194
Likes
23
Rating
0
P
PrintablesNoBrakes

Tractor cultivator updated for TEA20.

Personally I wanted nothing else but a plow or cultivator at the rear of my TEA20. I decided to search the web and found a cultivator posted 6 years ago which needed a little attention. But would fit my TEA20 perfectly with a few…

Downloads
180
Likes
31
Rating
5
P
PrintablesThx And Bye

Replacement for Mercedes A2016830035 ATTACHMENT ANGLE BRACKET

An attachment angle for my car broke so I created a replacement in CAD. For the unlikely case that anyone is searching for a replacement of this part, I put it here. It's the part that connects the center console panel to the tunnel…

Downloads
178
Likes
15
Rating
0
P
PrintablesArtyom

Narrow ilm lga2011 adapter

No support required, ideally should be printed with ABS. Was using 6 pc. M4x15 bolts, 4 pc. M4x18 bolts, 6 washers and two M4 nuts to attacht this to dual cpu motherboard.

Downloads
165
Likes
9
Rating
5
P
Printablesti-gil

Bose A20 Control and battery holder

Bose A20 Control and battery holder

Downloads
161
Likes
15
Rating
0
P
PrintablesbOBERmASTER

Atomstack A20/S20/X20 mount with adjustment

mount with adjustment for Atomstack A20/S20/X20 model fill >= 50% for assembly with laser you need: mount x3 mount2 x1 m5 screw 12-15mm x4 m5 nut x4 5mm washer x8 (optional)

Downloads
156
Likes
17
Rating
5
P
PrintablesAndi E.

Noctual Fan Adapter Mounting Plate 200 mmThis is a mounting plate for a 200 mm x 200 mm Noctua fan (NF-A20 series).

This is a design of a mounting plate for a 200 mm x 200 mm Noctua NF-A20 Fan. I used it to build a ventilated 3D-Printer cabinet. The mounting plate was printed on a Bambulab P1S with the 0.2 mm standard profile settings and a 0.4 mm…

Downloads
150
Likes
14
Rating
5
P
PrintablesNerdsMcGee

Insignia TV Feet - 43" NS-43D420NA20

Replacement feet for a 43" Insignia TV I acquired. The TV in question uses M4 screws.

Downloads
140
Likes
2
Rating
5
P
PrintablesLucas Roach

Subaru FA20 Rear Main Seal Installer

Used to properly install a rear main seal on Subaru FA20 engines (BRZ / FRS / 86 / WRX) ensures the seal is installed at the proper depth. I used this on my 2013 BRZ.

Downloads
136
Likes
10
Rating
5
P
PrintablesAlex

Samsung A20e iFruit TPU phone case

the title basically depending on how tight you want it you can scale it down like 0.2mm on X and Y axes

Downloads
136
Likes
12
Rating
0
P
Printablesredangel1984

"Der Skorpion" - Fan Duct for Geeetech A10M and A20M dual colour printers

Update 29.12.2018: Version 1.1 of Skorpion where the duct mount was thickened and the duct outlet was shortened to be a little more far away from the heater block Because the cooling on my A10M and A20M was not quite convincing, I…

Downloads
135
Likes
10
Rating
0
P
Printablesmatej

Haky na aku retezovou pilu / AKU chainsaw wall hooks (Parkside PKSA20)

Pila nemá bednu a není ji kam šikovně strčit. Navíc musí být ve vodorovné (víceméně) poloze, aby z ní netekl olej. Tak šla nakonec na zeď.

Downloads
127
Likes
23
Rating
0
P
PrintablesREDZC

Fan Duct Geeetech A20 easy print without support, tested

Easy printable. Print it without support. Tested 0.15mm, PLA

Downloads
124
Likes
4
Rating
0
P
Printableschal

Atomstack X20 A20 S20 Pro power supply mount

Print two. Screw them down with 4 screws.

Downloads
123
Likes
5
Rating
0
P

Intel LGA2011 to AMD 754/939 (may be AM2) cooler adapter

I made an adapter for my new chinese x79 motherbord and old AMD 754 cooler that I had. It will probably work for AM2/AM3/AM4, but I'm not sure. Category: Computer

Downloads
116
Likes
8
Rating
0
P
PrintablesHetothet

Low Poly DA20 Plane 1:232 scale

The print on the picture is resized by 200% i recommend you resize it to 200% as well before printing. Please don't forget to post a make and like the design if you enjoyed it :) happy printing!

Downloads
116
Likes
10
Rating
0
P
Printablestato_713

Samsung Galaxy A20s a207 case

Originally published here: Samsung Galaxy A20s a207 case by tato_713 - Thingiverse This case is for the Samsung A20s phone (models started with a207), for the A20 (a205 models) look here . Thanks to Cesar Augusto Finger for testing this…

Downloads
115
Likes
3
Rating
0
P
Printablesjuricabi

SAMSUNG GALAXY A20S TPU CASE

Bottom is flat. Case is tested. Best printed slowly in TPU.

Downloads
111
Likes
2
Rating
0
P
PrintablesFlundran

Noctua NF-A20 feet

Remixed mount for the Noctua 200 mm fan (NF-A20) to enable me to places them on my window sill without tipping over. To assemble you either need: 2 - M4x40 2 - M4 nuts 2 - M4 washers (optional) or: 4 - Fan screws (not tested but should…

Downloads
111
Likes
11
Rating
0
P
Printablesfirepower

E3D V6 Mount Geeetech A10 A10M A20 A20M

E3D V6 Mount A10 A10M A20 A20M Designed to mount on the existing A10 X carriage, use two M5x30mm SS Hex head screws for more support / key instead of original dome head screws for top roller bearings, for quick removal and replacement…

Downloads
109
Likes
14
Rating
0
P
PrintablesAlpha_Salsa

RTX A2000 fan shroud

RTX A2000 fan shroud, it doesn't perform that good. I wanted to test how viable such a thing was in practice. The files are for whoever wants to do something with it. Beware! The holes are like +- 1/2mm right. The screw might go in at an…

Downloads
108
Likes
12
Rating
5
P
Printables3DMakerNoob

Geeetech A20M Purge Bucket

Here's my first iteration of the purge bucket for the Geeetech A20M. Installing this along with the tool changing script (tested on Simplify3D Only), will allow the purge to happen within the bucket instead of the printer printing a purge…

Downloads
104
Likes
21
Rating
0
P
PrintablesGorobey

Geeetech A20 Direct Drive

In this remix I just edit for make support compatible with: https://www.amazon.it/gp/product/B085ZM19QC/ref=ppx\_yo\_dt\_b\_asin\_title\_o09\_s00 To use it I decreased the acceleration of the extruder to 400. The printer is stable at up…

Downloads
94
Likes
5
Rating
0
P
PrintablesValentin

Mercedes A2017270287 - W201 W124 - Door Panel Clip - Vapor Barrier

Mercedes Part A 201-727-02-87 This a printable replacement part of the door panel clip for the vapor barrier behind the door panels of various Mercedes models such as the Mercedes W201 (190, 190E) as well as the W124 (E-Class) . Would…

Downloads
91
Likes
12
Rating
0
P
Printablesbladel

Geeetech A20 fan 5015

Better fan for the Geeetech A20(M) Parts needed: -5015 fan -2x M3x25 Print the duct with the large side facing the buildplate.

Downloads
89
Likes
3
Rating
0
P
PrintablesIonNight

Noctua NF-A20 shelf/table mount and ducts

Noctua NF-A20 fan duct and table clamp mount I chose to go for table clamps on this one, bc the A20 fan is heavier than the 120 and 140mm fans. A table stand would be a lot bigger and I dont want to waste filament if I dont have to The…

Downloads
88
Likes
14
Rating
5
P
PrintablesSamdsx

TEA20 counter weights

TEA20 counter weights for the awesome model from @makitprojects_103007. One hole M3 needs to be done in order to add the M3 screw in front, the 2 back holes are already part of the chassis. If you like it please hit the LIKE button, it…

Downloads
87
Likes
11
Rating
0
P
PrintablesMateusz Urban

Boeing 737 Headphones Hanger for Bose A20 and A30, compatible with other headphones as well

After some research I decided to create my own 737 hanger for headphones. Specifically designed for Bose A20, but other models fit easy as well. The hanger is designed to be clamped onto a sun visor rail. Designed in a way to fit FO as…

Downloads
86
Likes
3
Rating
0
P
Printables3DPrintBeginner

Geeetech A20M custom build plate

I started using Prusa Slicer a lot more in the past few weeks with great results so i thought i make it look better. For each of my printers i added a custom build plate. This improves looks and it also makes it easier to see what printer…

Downloads
86
Likes
1
Rating
0
P
PrintablesIason Argyrakis

Mercedes Phone Holder for A180, A200 W176 | Compatible with iPhone & Android

Securely place your phone in your Mercedes A180, A200 W176 middle console. Compatible with iPhone & Android. Simple design, easy install No support needed

Downloads
86
Likes
13
Rating
0
P
Printablesfns720

Anker A2046 Powerport Atom III Slim wall mount

Anker's GaN chargers are my favorit. As they are quite slim I thought it might be a good space-saver idea to make a wallmount. I put two standard countersunk holes on its middle but you can securely mount them using 3M's command tapes as…

Downloads
85
Likes
5
Rating
0
P
PrintablesTom

Unique Color Generator for Geeetech A20M Cura Plugin

Hi guys, you maybe know my issue... You brought a 3D Printer with a dual extruder and after printing numerous cats, geckos, and traffic cones you're trying to find out what you should do now with this machine. I tried to figure out what…

Downloads
84
Likes
5
Rating
0

Geeetech A20T 5015 fan duct

The 40mm fan on my Geeetech A20T broke, and it is hard to find this 40mm fan in 24 volts. The 5015 50mm fan is far easier to get in 24 volts, costs far less, pushes more air, and is far more robust. This duct also reduced stringing by…

Downloads
80
Likes
9
Rating
0
P
Printablesilver

Sound devices A20TX CLIP holder for Rycote PCS

PETG - for strength and flexibility in the clip 100% infill - for strength in the clip Tree support for the clip + upper arc. -- A20 is secured with 2 countersunk screws (2,5x8mm), remember to remove small Allen set screws first, there’s…

Downloads
80
Likes
4
Rating
0
P
PrintablesMatteo

Satsana modified for Geeetech A20

Satsana modified for Geeetech A20 with the wall to mount the board

Downloads
77
Likes
9
Rating
0
P
Printablesredangel1984

E3D Hemera Mount for Geeetech A10 / A10M / A20 / A20M ... A## and A##M printers

Mounting instructions can be found in the PDF in the file section: <------ If you like this mount please use the "TIP DESIGNER" button and leave a tip for a hot or cold beverage. you can also use the link:…

Downloads
76
Likes
5
Rating
0
P
PrintablesJimiNewtron

Geeetech A20 fan shroud

This is my recreated version of the original fan shroud of my Geeetech A20. I modeled it after the original fan shroud broke. It snap fits into the hole of the fan and can be additionally locked with the screw. I removed the curve on the…

Downloads
75
Likes
3
Rating
4
P
PrintablesNeo862

Wrench for Openrc Tractor Mk3 - TEA20

Here is my first design : A Wrench for the toolbox of the Openrc Tractor Mk3 - TEA20 of Makit that you can find here : https://www.printables.com/model/318896-openrc-tractor-mk3-tea20 The wrench fit perfectly for the toolbox.

Downloads
75
Likes
16
Rating
0
P
PrintablesNexox Enigma

Dual Fan Duct for SuperMicro 1U LGA2011 heatsink

I bought an older SuperMicro server motherboard off ebay and it came with a low-profile 1U heatsink, which depends on airflow from some very loud fans, directed through the fins by the close-fitting top of the server chassis. Since I put…

Downloads
75
Likes
11
Rating
0
P
Printablesksxx

surface splinter protection insert for Parkside Jigsaw model PSSPA20-Li D3

I made this replacement part before I loose the original one since I doubt I will be able to ever buy one… I made 2 versions. One that is the same as the original and one with a narrower cut for the blade. Don't know on which other models…

Downloads
75
Likes
7
Rating
0
P
PrintablesVincentDB

LGA2011 CPU case

A small, stackable case for Intel LGA2011 (Intel Xeon E5 v1-v2) CPU's. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't Matter Supports: Yes Resolution: 0.2mm Infill: 20% Category: Computer

Downloads
74
Likes
8
Rating
5
P
PrintablesJohanTess

Atomstack X20/A20/S20 Laser Seal

For Atomstack X20, A20, S20 Sealing the air-assist chamber good or bad idea? I was surprised by the amount of dirt (soot) I found in the chamber after a few cuts. The soot can land on the protective lens and cause distortion or more…

Downloads
74
Likes
5
Rating
0
P
PrintablesSamdsx

Dumper trailer hook for TEA20 tractor

Dumper trailer hook for better fit on the TEA20 tractor from @makitprojects_103007. The original one sits to low on the tractor hook. You can find the trailer here .

Downloads
73
Likes
18
Rating
0
P
Printablesjyc35

Geeetech A20m mount 2in1 bigtreetech cyclops hotend

11/26/2020 Update: V3!! (Green) Fixed part that was touching M5 screws, Added mounting point for 40mm fan As i accidentally destroyed my Geeetech A20m hotend trying to unclogged it. So i'm designing a mount / backplate for the Bigtreetech…

Downloads
64
Likes
12
Rating
5
P
PrintablesSajmahal

Threaded Cap for FA20 EJ Oil Funnel

A nice little cap to go along with the funnel made by NotForEveryone. I keep the funnel in the car and it leaks a bit of oil after refilling my car so I thought this would be a nice addition.…

Downloads
64
Likes
14
Rating
0
P
PrintablesDickie_does

Sub250 Huma20 FPV Walksnail Mooklight & GPS

Sub250 said that the Huma was only suitable for the DJI 03, however just two parts are required to fit a Walksnail Moonlight as well as some 30mm (M2) standoffs and two 10mm x M2 bolts.

Downloads
61
Likes
5
Rating
0
P
PrintablesBM

Bose A20 zip tie mount

Printed in petg with supports. Print vertical

Downloads
59
Likes
7
Rating
0
P
PrintablesWilli

Mercedes A2089130172 W208 Clip

Clip für den Sitz des W208 zur Befestigung der hinteren Verkleidung. Muss als Spiegelteil für die Gegenseite gedruckt werden.

Downloads
57
Likes
13
Rating
0
P
PrintablesOne Maker Show

Vacuum adapter for BLACK+DECKER KA2000-QS To FESTOOL hose.

Vacuum adapter for BLACK+DECKER KA2000-QS To FESTOOL hose.

Downloads
56
Likes
13
Rating
0
P
Printablesikke0666

Hefbok for MK3 TEA20

Use together with MK3 TEA20 https://www.printables.com/model/318896-openrc-tractor-mk3-tea20 and platform trailer https://www.printables.com/model/484950-openrc-tractor-mk3-tea20-platform-trailer both models are from makitprojects…

Downloads
56
Likes
5
Rating
5
P
PrintablesSamdsx

TEA20 Hitch

TEA20 Hitch remix from @makitprojects_103007 to fit @TheDIYGuy999_1267409 coupler. The hitch part 4 is fixed to part 3 with 2 M3 screws.

Downloads
56
Likes
7
Rating
0

Slide Potentiometer PTA2043-2015DPB103

I made it because I couldn't find any online and I want it for a project. It is based on the information given by the datasheet . I hope you find it useful.

Downloads
54
Likes
4
Rating
0
P
PrintablesTocxo

Dron body Potensic A20

The design is inspired by the Hover Air drone. It is designed to be assembled and glued. The files are optimized for perfect balance and work just as well as the original body, but without the camera or front light, which I removed for…

Downloads
52
Likes
4
Rating
0
P
PrintablesMeister Edel

Noctua NF-A20 3D CAD Model

I am just creating sth. around the NF-A20 fan. If you have a project too here is the CAD file of the fan - you don't have to take all the measurements yourself :D Have fun!

Downloads
52
Likes
4
Rating
0
P
PrintablesMeister Edel

Silent Breeze: The 200mm Magnetic Travel Fan (Noctua NF-A20)

Tired of loud, flimsy portable fans that barely move any air? This project transforms the industry-leading Noctua NF-A20 (200mm) fan into a versatile, silent, and fully portable cooling powerhouse. Whether you’re working on your laptop,…

Downloads
51
Likes
27
Rating
5
P
Printablescoolder1001

AMD Wraith Cooler to LGA2011 Mount

An adapter I made really quick to convert my AMD CPU cooler to fit one of those cheap Xeon motherboards. You mount the adapter pieces to the board using m4 6mm screws. Two important notes: 1. I haven't used this for high temp applications…

Downloads
50
Likes
6
Rating
0
P
Printablesmcweck

12mm tire hex adapter Turnigy Trooper SCT 4x4 1/10 A2016T 32746

Since I couldn't find anything on Ali when looking for a spare part, here is a replacement for the 12mm hex tire adapter (part number: 32746). I printed it in ABS, but it would probably also work in PETG or PLA. edit to your needs.

Downloads
50
Likes
3
Rating
0
P
PrintablesDas Faust

Geeetech A20/A20M GT2560 V4.0 to SKR 1.4 Turbo Adapter

Needed an adapter to install an SKR 1.4 Turbo with TMC2209 stepper drivers, after a few tries I finally came up with one that works. I used Jayo PLA Meta in Gray, 1.8 layer height. M3x5 Screws to mount the board, M3x5 with washers to…

Downloads
48
Likes
1
Rating
0
P
Printablesfirepower

A10M A20M Part Fan Duct

After trying other A10M Parts Fan ducts, and they blow on nozzle i remixed to place it lower and add lip to force some air downwards. Also fillet mounting hole corner. Print Settings Printer: Geeetech A10M Rafts: No Resolution: 0.2mm…

Downloads
48
Likes
2
Rating
0
P
Printableswavexx

ICOM IC-A20 bottom cap

Bottom cover for the ICOM IC-A20 for use without a battery. Two versions provided: ica20-cap-supports.stl : version with hand-crafted supports ica20-cap-nosupp.stl : no built-in supports The cap slides and clicks without play. Use a 0.4…

Downloads
45
Likes
4
Rating
0
P
Printablesfirepower

A10M A20M Parts Fan

After trying other A10/M Parts Fan ducts, they blow directly on nozzle. I copied the original A10M Fan duct and made it longer so it blow below the nozzle, also trimmed it and laid it flat by using 45 degree cuts. Print flat no supports…

Downloads
45
Likes
4
Rating
0
P
Printables3DPrintBeginner

Geeetech A20M custom build plate

I started using Prusa Slicer a lot more in the past few weeks with great results so i thought i make it look better. For each of my printers i added a custom build plate. This improves looks and it also makes it easier to see what printer…

Downloads
44
Likes
3
Rating
0
P
PrintablesFreman

Windscreen Mount for Navman MiVue A20 Rear Dashcam

My friends forgot to remove their mount from the rear windscreen and needed a new one... Rather than paying $15 + shipping I just knocked this out, partially from memory. I've provided two models, one that sorta follows the lines of the…

Downloads
43
Likes
2
Rating
0
P
PrintablesTomslick

Noctua NF-A20 Fan Edge Molding

I purchased a Noctua NF-A20 fan and it would not fit inside my computer case due to an internal interference. I decided to mount in on the outside of the case as long as I could make it look decent. I am pretty happy with the result. I…

Downloads
43
Likes
8
Rating
0
P
PrintablesLauge

PC stand with Noctua NF-A20

Just a simple stand for my DIY PC Case, which has a Noctua NF-A20 fitted underneath for airdflow.

Downloads
42
Likes
8
Rating
0
P
PrintablesIhgedasila

Geeetech A20M Cable Management

The Cable Organizer remain between two extruders to avoid any problem with the cable during the print. you will need the support and also two t-nuts and M3 screws. better to print with 50% infill. I put two different stl files whit the…

Downloads
42
Likes
2
Rating
0
P
PrintablesLapplandsCohan

Atomstack X20 A20 S20 Pro Z-axis adjustment stop switch fix

Installing the Z-axis adjustment accessory on the Atomstack *20 Pro models requires moving the Y-axis stop switch 20mm or the machine will fail to home, and even when moving the switch 20mm it will still fail if the laser head is in the…

Downloads
41
Likes
3
Rating
0