Search results: adapted

Sort order

144 models

P
PrintablesOgre Ray

AUKEY RGB Touch Lamp Adapted - Moon Lamp

I reverse engineered the AUKEY Table lamp adapter pattern and put it on the bottom of the moon. The moon now mounts into the AUKEY lamp, and can have multiple RGB colors or bright nesses…. the AUKEY Lamp base is sturdy and supports the…

Print approx. €0.94–€1.15 excl. taxPreliminary estimate for one variant

Downloads
19
Likes
0
Rating
0
P
PrintablesIts-my-right

Prusa MK3s+ Fan shroud adapted for Mk3s

Prusa released the printable parts for MK3s+ and the fan shroud is much better than the stock one of the Mk3s, so, for everyone who don't want to fully upgrade from Mk3s to Mk3s+ but still would like better cooling, I cut the second…

Downloads
6,778
Likes
294
Rating
4.88
P
PrintablesPexaba

Gridfinity Baseplates adapted to Multiboard system

V1 - untested - 2x3 and 1x2 Gridfinity Baseplates adapted to Multiboard system - untested - tested: 2x4 Printed in clear resin it fit too loosely into the Multiboard octagon tile, but with a bit of glue it now holds a 600g bluetooth…

Downloads
981
Likes
149
Rating
5
P
PrintablesFab3D Udesc

Pythagorean Mug (an adapted pythagorean cup)

V2 is available now. As requested, we've lowered the handle (consequently, the siphon), so the draining action should now start at about 2/3 of the cup. In the original file, the mug would have to be almost full before it started…

Downloads
473
Likes
62
Rating
5
P
PrintablesAjax Bachor

Foxeer Wildfire Adapted case for Digidapter

Modified V3 Shell to properly fit the Foxeer Wildfire Analog Module

Downloads
386
Likes
5
Rating
0
P
PrintablesNanodesigner

Contribution to the "Retractable_Probe_Dock for Klicky Probe and Quickdraw Probe" system for Voron of "Tronfu" adapted to VzBotrobe" per Voron di "Tronfu" riadattato alla VzBot

Contributo al sistema "Retractable_Probe_Dock for Klicky Probe e Quickdraw Probe" per Voron di "Tronfu" riadattato alla VzBot. Più che contributo, e un restyle estetico al modello di Eduardo Sousa ma modificando il sistema di regolazione…

Downloads
378
Likes
55
Rating
0
P
Printablesedmar

Reolink E1 mount - new and old model - adapted for my tilt mount

Obs: This mount was primarily designed to be used with my tilt, both for desk and wall mounting, which can be found at this link: https://www.printables.com/model/1073632-reolink-e1-mount-magnet-wall-and-table-mount I have Reolink…

Downloads
345
Likes
25
Rating
4
P
PrintablesSink

Lamp #57 - Square Block lamp shade adapted to Bambu Lamp Kit 001 Base

A printed offset block lamp shade using the Bambu Lamp Kit 001 Base and Puck Led lamp. This shade uses a square base to adttach to the bambu Led Lamp 001 circular base. Lamp w/Base: 215 mm by 80 mm wide No supports required. The puck led…

Downloads
306
Likes
67
Rating
5
P
PrintablesSmeat1957

Heat Set Insert Press Adapted for 608zz Bearing

This is based on Adafruits model. I adapted this to use the 608zz bearing, and printed a base

Downloads
289
Likes
50
Rating
5
P
PrintablesSasha D

Hadley Adapted FuseBridge 1.25" Focuser

UPDATES: Added version with mounting screw holes countersink so knob does not collide with screw head for those using full sized screw heads. This focuser is based on the Crayford design, where a smooth pinion is rolled along a smooth…

Downloads
281
Likes
52
Rating
5
P
Printablesschreider

Drag Chain Clips adapted for a 10x15 chain for Flashforge Adventurer 5M (AD5M)

Link to the chain To install it, you will need: 1) Screw M3x10 ISO7379 (10mm is the size of the smooth part! To this length, 6mm threaded parts are added, a total of 16mm!) Or screw the limiter onto a regular M3x16, the file is available…

Downloads
259
Likes
33
Rating
5
P
PrintablesSparrowHawk

Adapted Bearing Holders for 22x7mm ø8mm Bearings - TIGHTER BEARING PIN

Remix Description: Added small ridges on bearing pin to create a tighter fit with ø8mm bearings. This ensures the bearing actually rolls on its internal ball bearings, rather than just freely spin around the pin. Also re-oriented the STL…

Downloads
252
Likes
22
Rating
4.8
P
PrintablesAndrei

Spiral vase with adapted smaller and taller plate

I didn't like the original plate as it is a little bit to big relative to the vase and it could not hold any water being to shallow so I made a smaller design that has higher walls.

Downloads
233
Likes
23
Rating
5
P
PrintablesSink

Lamp #56 - Honeycomb style lamp shade adapted to Bambu Lamp Kit 001 Base

A honeycomb pattern lamp shade adapted to use use Bambu Lab Lamp Kit 001 base Shade with base: 190 mm height x 85 Width No supports required. The puck led used here: (The example used a 5W, 2700K, Warm White)…

Downloads
227
Likes
37
Rating
5
P

Jiji Cat Adapted for Multi material printing

I've adapted this model: https://www.thingiverse.com/thing:3369946 Using Meshmixer and a reasonable amount of patience (lol). Print instructions The design was meant to be printed using the MMU2S from Prusa Research. High resolution is…

Downloads
221
Likes
64
Rating
4.88
P
PrintablesDaniel615be

Adapted pieces for the Automatic Filament Rewinder

To lower the angle and reduce the tension on the spool, I've raised the length of the slider aligner pivot by 10 mm. To reduce the friction I use a Capricorn's PTFE tube on the slider aligner arm. I've adapted the tension arm to use a…

Downloads
205
Likes
38
Rating
5
P
PrintablesPaul Corbett

Multiboard adapted

Combined both parts into one.

Downloads
201
Likes
33
Rating
5
P
PrintablesTmpx64

Strong Lack Bracket - adapted for 2.5mm Ø countersunk screws

Remix of Stigern's great model, with screw holes adapted for 2.5mm Ø countersunk screws (2.5mm x 20mm screws used in my case, EAN: 4053199302444 )

Downloads
201
Likes
67
Rating
5
P
PrintablesTadTadd

Replacement bracket for Valoi Copy Stand, strengthened and adapted for Arca-Swiss mount

This is a bracket that mounts on any standard 3030 T-slot rail, with a T-nut and a M5 bolt in the back. You can attach a common Arca-Swiss adapter plate to the front using a ¼-20 socket head screw with a washer. I designed this because I…

Downloads
198
Likes
28
Rating
5
P
PrintablesStagebox

M3 Adapted Ducky Iron Sights Variant

I liked the height, the design and the adjustability and just didn't have the right screws at hand. So I adjusted the model for the M3s that I had. Because those didn't fixate the sights in the notches of the rail due to the smaller…

Downloads
144
Likes
47
Rating
5
P
PrintablesGabor

VZ-printhead adapted for VCore3 + stock MGN12C + Orbiter 2.0 + Rapido UHF + CPAP

Its a heavily modified version of the ingenious design from Vez3D, exclusively for the VCore3 with the stock MGN12C rail

Downloads
143
Likes
17
Rating
0
P
PrintablesAndrew312

Stealth Press (Adapted to 2020 Extrusion)

I had a lot of spare parts after converting my Ender 3 to a Switchwire, including a linear rail that was 20mm too long for the orignal Stealth Press. So I decided to just adapt the existing files to my spare 2020 aluminum extrusion that…

Downloads
139
Likes
25
Rating
0
P
PrintablesBruce

Modular Miniature Vise Adapted for Imperial Bolts and Nuts

I loved HD_Creator's vise but I found 6mm bolts and nuts very hard to find in the USA. I revised it slightly to allow the use of common 1/4in-20 hardware which is available everywhere here. I used TinkerCad to enlarge the hex shape in the…

Downloads
137
Likes
27
Rating
0
P
PrintablesSendoushi

Voron Trident tensioner adapted to Legacy

Voron Legacy tensioners on the drives are flawed and I would like to have a bit more control on the front. Voron Trident front tensioners are quite well engineered. This is an adaptation of those tensioners to work with the Voron Legacy.…

Downloads
127
Likes
34
Rating
0
P
Printablesrobot ex

Airbrush HexDesign Stand adapted to fit more airbrushes

Airbrush HexDesign Stand adapted to fit more airbrushes including those with air valves

Downloads
125
Likes
18
Rating
4.5
P
PrintablesMichael Paul

Adapted Wiper Clip for Subaru Impreza to Rain-X

Adapted Wiper Clip for Subaru Impreza to Rain-X printed in asa

Downloads
107
Likes
6
Rating
0
P

Squirrelbrain's Pi 3 housing adapted for thread inserts

I have taken a wonderful Raspberry Pi 3 case from Squirrelbrain and adjusted the design for use of ruthex thread insert instead of screwing bolts directly into plastic. For mounting of Pi plate the M2 thread inserts are used. All the of…

Downloads
106
Likes
21
Rating
4
P
Printablesm0k2001

Adapted ZeroClick on Voron 0.2 Mini StealthBurner

I didn't find an existing way to adapt ZeroClick on my MiniSteahburner so I finally decided to redesign it by my own. I chose to fix it with 2 screws (M2 8mm is fine) and 2 M2 brass inserts (M2 3mm). You have to reprint your toolhead. I…

Downloads
96
Likes
14
Rating
0
P
PrintablesTenocticatl

Filament Drybox (the best-of-the-best components), adapted for "Kichly" boxes

Introduction: SteveT did a great job collating parts and doing a writeup of the assembly, I just didn't pay close attention when buying parts and ordered the wrong bins. These were branded “Kichly” rather than “Skroam”; the biggest…

Downloads
93
Likes
15
Rating
0
P
PrintablesMorcillus Rex

Bearing Spool Holder adapted for Elegoo Centauri Carbon 2

I needed a spool holder that fit small diameter filament spools from local brands. Uses same pin and roller as the original. Removed the logo. I printed it in petg, using it with printed bearings, decently tight fit on the printer, no…

Downloads
92
Likes
19
Rating
0
P
PrintablesMatej

Raspberry Pi 3, Pi 2 - adapted design without screw

Adapted design for assembly without together screw. Screws replaced with plastic snap-in latches. Original thing: https://www.thingiverse.com/thing:922740 Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No…

Downloads
86
Likes
10
Rating
5
P
Printablesmarbell

Micro swiss NG extruder fan shroud 5015 adapted and for volcano hotend

NG extruder fan shroud 5015 adapted since I like to use 0.6 nozzle I also made a volcano adaption for this fan shroud with 5015 blower

Downloads
86
Likes
13
Rating
4.5
P
PrintablesfreakyDude

Belt clamps adapted for TorxFighter GE5C and Beefy Idlers on Voron ChaoticLab Carbon Fiber Bracket Kit

This is a set of adapted V2 BeltClamps if you use the ChaoticLabs Carbon Fiber Bracket Kit together with TorxFighter Zero offset Clamped GE5C Mount for Voron 2.4 + Beefy Front Idler The V2 BeltClamp design is used where possible and the…

Downloads
74
Likes
16
Rating
0
P
PrintablesJosuanbn

Bauer Full Face Visor adapted clips for CCM Helmets

I purchased two Hockey CCM Helmets in a end-off-life offer, but actually, the Full Face Visors I have are from Bauer. The holes for the clips in the CCM helmet are 11mm wider than in Bauer helmet and I designed this clip variant to avoid…

Downloads
74
Likes
3
Rating
0
P
PrintablesGrubbyZebra

IR Filament Sensor Adapted for Bondtech Prusa Mk2/s upgrade

I didn't like the design of the Bondtech IR filament sensor adapter for the Mk2/s upgrade extruder ( https://github.com/BondtechAB/Bondtech_Prusa_i3/tree/master/CAD-Files/MK3s%20Sensor%20Add-On ), so I made my own. this one flips the…

Downloads
72
Likes
14
Rating
5
P
PrintablesPH_Zero

Playmat Tube adapted for Witcher The Old World Playmat

This is just a remix with adjusted measurements for the playmat of The Witcher Old World, which is pretty large. You need to print all in vase mode. I printed all on PETG, but PLA will work just fine. Need to print: 1 x cap 1 x Base 3 x…

Downloads
72
Likes
5
Rating
0
P
PrintablesLa3emedimension

Crayford reducer V2 adapted for Skywatcher "classic" focuser

Remixed the main button so it can be installed on a Skywatcher Crayford focus button. If you want really smooth operation, check out the anti-wiggle needle mod here:…

Downloads
70
Likes
10
Rating
0
P
PrintablesWalter Layher

Multiple Mechanism Auto-Rewind Spool Holder, Adapted for Prusa 2kg Spools

I have been using these very reliable spoolholders by ea69 for a few years now and always wanted to have one for 2kg Prusa spools. I used the step file and made the stand and the threaded shaft 40 mm wider. I did not know the parameters…

Downloads
66
Likes
13
Rating
5
P
PrintablesNinjafyrus

Elucidator from SAO with the handle adapted to The Lucky 13.

Basically, I cut the handle off the original and attached it to an existing Elucidator model so I could use it.

Downloads
65
Likes
11
Rating
0

Ender 5 S1 Front Bed Supports, adapted to work with linear rail kit from Hoon

I've printed all the parts from PETG (230°C/70°C), without support, layer 0.3, cubic infill 30%, 4 walls, 4 top/bottom layers.

Downloads
63
Likes
10
Rating
0
P
PrintablesDirk De Wolf

Worx Accu holder adapted for multiboard

Added two pegs to the original design to mount it on a multiboard.

Downloads
63
Likes
4
Rating
0
P
Printablesespressohackers

Dosing cup holder for DF54 adapted from DF64

DF54 has two holes, against 1 in DF64, I remixed the original model. The two holes were fixed a little below the one in the version for DF64 so that the dosing cup can get closer to the chute. Publishing here for someone to print and test…

Downloads
62
Likes
8
Rating
5

Adapted Bocce Launcher

This is my first 3d project upload. I remixed a hot wheels launcher to make an adapted bocce launcher. This was a way to make an accessible bocce launcher for use during adapted physical education classes. This is the 4th or th…

Downloads
59
Likes
3
Rating
0
P
PrintablesRPK

Wire Shelving Clip-in Divider/Stoppers - adapted for 30mm

Thanks to "Triple G Workshop" for the great shelf stopper. Instead of having to create one myself, I was able to save a lot of time by modifying the existing model. By adapting it to a wire spacing of 30 mm in width and 18.5 cm in height,…

Downloads
58
Likes
12
Rating
0
P
Printableschantepierre

Crayford reducer by EleusisT adapted for ST80 stock focuser

Remixes the main knob so it can be slip-fitted on a skywatcher ST80 stock focuser knob. If you want truly smooth operation , see the anti-wiggle needle mod here :…

Downloads
57
Likes
4
Rating
0
P
PrintablesContomo

Keen-One adapted to fit advancements made

All other parts which used to require drop in nuts now use heatset inserts! they are M4mm knurled inserts 8mm long. changed the motor mount to now be longer, aswell as the motor cover, to fit the 1:27 stepper gearbox mod also posted in…

Downloads
57
Likes
1
Rating
0
P
PrintablesFuntomaas

3D Scanner PaScn3D Mk.0: Remix adapted for Prusa Mini+

I like Tomasz' original Version for the Prusa I3 MK3, but I own a smaller Prusa Mini+, so I changed some things. When I started I wasn't quite familiar with FreeCAD and Prusa-Slicer, so I had some learnings and of course I would make it…

Downloads
53
Likes
19
Rating
0
P
PrintablesStephan Prantl

Chaining Pot Lid Rack - adapted

A pot lid rack that prints in lil sections - adapted original model to make it a bit nicer by having clean start and end parts. Original model: https://www.printables.com/model/1178526-chaining-pot-lid-rack. Thanks to…

Downloads
53
Likes
7
Rating
0
P
PrintablesEclypse3D

Sovol SV06 BTT Manta M5P controller adapted frame bracket mount

I modified the original mounting bracket model from Sovol for the Sv06 to allow the mount of the BTT M5P mcu box created by Raziel. I took the stock bracket and extended it 13mm to clear the top of the box. I could not put the mounting…

Downloads
53
Likes
4
Rating
0
P
Printablesdaimhinm

Prusa Mini Dual 4010 Part Cooling Fans (Adapted from Annex K3)

Add dual 4010 fans to a stock Prusa Mini or SliceEngineering Copperhead. Uses Annex Engineering K3 4010 fan ducts, at original angles and spacing. Suggested 5V Fans: BFB0405HHA-A (2 wire, no Tach) or BFB0405HHA-AF00 (3 wire, w/ Tach) If…

Downloads
53
Likes
18
Rating
0
P
PrintablesFer Estrada

Ender 3 S1/ S1 Pro Extruder Upgrade: 5015 layer fan + 3010 HS fan + V6 hblock (Optional) + all other adapted parts needed

This MOD replaces the stock 4010 fan with a 5015 layer fan,a 3010 for heatsink cooling and an optimized fan duct. 5015 Fan improves air flow and air volume. It's adjustable in height. 3010 fan, replaces the crappy and noisy one that needs…

Downloads
50
Likes
9
Rating
0
P
PrintablesJonas Bouchard

Adapted Dual 5015 Fans for Ender 5 S1

It no longer intercepts with the belt.

Downloads
50
Likes
5
Rating
0
P
Printablesgziegler

Voron M4 Extruder adapted to soft TPU

This is a remix of the Voron M4 extruder for Ender 3 V2, see https://vorondesign.com/voron_m4 and https://www.thingiverse.com/thing:4901100 I publish only the modified midsection, which I have optimized for extruding soft TPU, i.e.,…

Downloads
49
Likes
18
Rating
0
P
PrintablesTeresito

Creality K1 Adapted Moons Extruder

The goal of this design is to utilize my spare creality k1 extruder to my other 3d printer (specifically my CR-10 V2) and gain learning experience making 3D designs Please refer to the original extruder design for the inner motion…

Downloads
47
Likes
21
Rating
0
P
Printablesdaimhinm

REVO Prusa Mini Dual 4010 Part Cooling Fans (Adapted from Annex K3)

Add dual 4010 fans to a Prusa Mini with a REVO hotend. Uses Annex Engineering K3 4010 fan ducts, at original angles and spacing. Suggested 5V Fans: BFB0405HHA-A (2 wire, no Tach) or BFB0405HHA-AF00 (3 wire, w/ Tach) If you want the fans…

Downloads
45
Likes
14
Rating
0
P
PrintablesPatrickP

Adapted Knife Handle

I designed this knife due to my own limitations while handling ordinary cutlery. The body and 2 grips can be pressfitted together depending on handedness. I used ABS and had no issues with stability so far, given that the visible part of…

Downloads
42
Likes
11
Rating
0
P
Printablesfranciscorp

LED Light Bar Prusa i3 MK2/MK3 - Adapted for 9x17.8mm rail

This is a slight modification in the LED Light Bar to fit a 9x17.8mm u-profile. Para os Brasileiros que estão tentando montar o LED Light Bar, esta é uma versão modificada que encaixa perfeitamente no seguinte perfil de alumínio:…

Downloads
41
Likes
5
Rating
0
P
PrintablesIfrit

Emergency Stop Button adapted to tact switch

I had 2 EMO button but only 1 module to cut the main voltage. To re-purpose the 2nd EMO, I've made this box to adapt a small 6mm tact switch (pushbutton). The height is adapted to screws I had in stock. The hole is large enough for a 2…

Downloads
41
Likes
5
Rating
0
P
PrintablesTeresito

Creality K1 Adapted Moons Hotend

The goal of this design is to utilize my spare creality k1 extruder to my other 3d printer (specifically my CR-10 V2) and gain learning experience making 3D designs I have provided my step file in hopes of other people adapting it into…

Downloads
40
Likes
5
Rating
0
P
Printablesbrocode

Adapted Front with Torpedo Tubes - MCRN Morrigan class

With four short little wire parts you can make the torpedo covers work fine and have the morrigan class with two torpedo tubes. I even fixed the part to connect parts xxx_-_morrigan10 and xxx_-_morrigan15 better but still holding really…

Downloads
40
Likes
6
Rating
4
P
PrintablesCabista

Hand Can Holder - "adapted"

Can Hand Holder for SUP-Board, Kajak… https://www.printables.com/model/980526-stand-up-paddleboard-05-l-dosen-07-l-thermoskannen

Downloads
39
Likes
11
Rating
0
P
PrintablesForfelet

mmu3-selector-front-plate-R4 adapted for PC4-M10 with indicator

Add supports under indicator Print ring separately (100% scale) PETG 0.2mm, 20% grid infill, nozzle 0.4

Downloads
39
Likes
5
Rating
0
P
PrintablesTonis Designs

Adapted almost perfect Ender 3 Tool Holder

I remixed the part to suit my needs better. Its a bit shorter and flatter now and can fit my iso-spraybottle and a brush

Downloads
37
Likes
1
Rating
0
P
PrintablesJonas95

Amalfi Organizer adapted for sleeved cards

As for @JeremyKREBS_559468's design, you may need to remove the carboard organizer from the box, fold the carboard around the printed organizer before reinserting it into the box. However, the fit could be better with thinner sleeves or…

Downloads
36
Likes
3
Rating
1
P
Printablesd.revan

Updated Thumbwheels for Hadley Adapted FuseBridge Focuser

Sasha D's Crayford-style focuser for the Hadley telescope is excellent! I highly, highly recommend it. Focus adjustments are MUCH smoother with the Crayford-style focuser. I ended up stripping the plastic threads on one of the setscrews…

Downloads
36
Likes
7
Rating
5
P
PrintablesTom Lauerman

End Cap for OpenBuilds extruded aluminum (adapted from other designs)

End Cap for OpenBuilds extruded aluminum (adapted from other designs)

Downloads
34
Likes
3
Rating
0
P
Printablesclevercode

Adapted Faceplate for Arducam and USB

Amended faceplate to fit https://www.amazon.ca/dp/B098L7WJ4C?th=1 USB splitter ports

Downloads
33
Likes
2
Rating
0
P
PrintablesMina

MiniSB adapted Latch for ERCF ECAS04

Moved the notch for the ECAS04 to the center of the part. Use standard Voron print settings.

Downloads
33
Likes
8
Rating
0
P
PrintablesEleusisT

Crayford reducer V2 adapted for Bresser hexafoc focuser

Remixes the main knob so it can be slip-fitted on a Bresser Hexafoc Focuser. Tested on Bresser AR102s/600 refractor but it should be working for any Bresser Hexafoc 2.5" Focuser (?)(TBC). Adds an attachment plate that fits the focuser…

Downloads
32
Likes
5
Rating
0
P

Mac mini M4 Power Button Adapted for the Wokyis Dock

I just mixed up GreaseMonkeys brilliant small power button model , it's been adapted to be used with the Wokyis Dock to combat the thicker edge of the dock itself and helps stop the annoying way you have to manhandle the dock and mac mini…

Downloads
32
Likes
1
Rating
0
P
PrintablesMorat

Adapted LED Holder for Barina T5 remixed from Hydoponics Tower with LED Lights

Remix of the LED holder for a different style of LED light: https://www.amazon.co.uk/dp/B0DJ73G4PX?ref=ppx_yo2ov_dt_b_fe

Downloads
31
Likes
2
Rating
0
P
PrintablesDWP

GEN2 Decor Handle - Adapted for 12mm screws! (DWP_Remix)

GEN2 Decor Handles - Adjusted for 12mm screws instead of the default 16mm and a bit ‘more chamfered’ for esthetics.

Downloads
30
Likes
7
Rating
0
P
Printablesmaniack

Crayford reducer adapted to Celestron SCTs

Updated to: Use a smaller diameter main knob for more clearance from the diagonal on a C5. The new main knob is the same diameter as EleusisT's original. Use snap fit connectors to secure the reducers' support to the secured base plate.…

Downloads
30
Likes
6
Rating
0
P
PrintablesLozamed

GBA casette shell insert (Adapted for varius types of cassete shells)

Game Boy inserts for cassete box I buy from aliexpress some cassete boxes for my GBA games and discovered they where incompatible (not close well) so I modfied some ones to make it fit GB/GBC made by @EntirelyTom_2031571 GBA made by…

Downloads
30
Likes
1
Rating
0
P
PrintablesHealow

Adapted front part for the legendary Morrigan Class from Martin

I had problems mounting the front part of the Morrigan class, this was only possible by a modification more bad than good (see photos). I have therefore slightly modified the mounting of the part so that it now fits without any problems.

Downloads
30
Likes
3
Rating
3
P
Printables3DDXL

TUSH Spool Holders Adapted for 1/4" ball bearings.

Spool Holder based on the TUSH model for ¼" (6.35mm) ball bearings. These bearings are common in the US. Printed in Overture PETG on a 0.6mm nozzle. Settings are based on the Mk3S/+ 0.6mm nozzle and Prusament PETG config. I add additional…

Downloads
29
Likes
6
Rating
0
P
PrintablesProto Modder

4010 Extended Blower Duct for K1 CHC Hot End – Adapted for Toybox Alpha

This 4010 extended blower duct is specifically designed to optimize airflow for the K1 CHC (Ceramic Heater Core) Hot End , seamlessly integrated with the Toybox Alpha 3D Printer's stock fan location . The duct channels airflow efficiently…

Downloads
27
Likes
1
Rating
0
P
PrintablesDaniele R.B.

Ender 3 Fan Shroud (Hydra Fan Duct Adapted)

This is a remix of the original Fan Shroud model to allow mounting on the Hydra Fan Duct: https://www.printables.com/model/169197-hydra-fan-duct-tool-change-system-for-ender-3-ende The duct is no more straight but slightly pointing…

Downloads
27
Likes
4
Rating
0
P
Printables0x4242

Eames LTR Side Table adapted 3D printable version - WIP

Currently the model is at 1:1 scale which won't fit most printers (table top dimensions are 392mm x 335 mm). Tolerance are 0.2mm between the parts, so some rework might be necessary if scaled down for printing. I'm still working on a…

Downloads
27
Likes
8
Rating
0
P
Printablesyukosteel

40mm fan duct adapted for Neptune 3 Pro

UPDATE: This cooling solution is only good if you have only 40mm or 60mm direct fan. There is much better cooling option using dual 5015 turbo blowing fans on slower speed . Remixed 40mm fan duct with wider air flow pipe to better and…

Downloads
27
Likes
2
Rating
0
P
PrintablesKaaG

Ryobi One 18v router base adapted for using with router bushing

Ryobi One 18v router base adapted for using with router bushing

Downloads
26
Likes
1
Rating
0
P
PrintablesMattW

Toyota 4Runner 5th Gen - 3.5" Dash Speaker Mounts - Adapted for JBL GX328

I decided to install JBL GX328 speakers instead of the Infinity speakers. I chose these speakers for their lower impedance, which more closely matches the stock speakers' 2-ohm impedance in my JBL system. I found out that they will not…

Downloads
25
Likes
0
Rating
0
P
PrintablesKevinsHope

Gold tile with adapted for magnetic tile

This is nothing particularly special. I created it to go with Dakanzla's magnetic tiles here: https://www.thingiverse.com/thing:1238980 If you want to know how I got the gold sheen on the paint job, I stood about 6 foot back with a can of…

Downloads
25
Likes
2
Rating
0
P
PrintablesLiberty4Ever

Ultralight Compact DJI Mini 3 Slip Case - Easily Adapted To Other Mini Drones

I made a compact ultralight slip case to protect my new DJI Mini 3 drone and RC-N1 flight controller when motorcycle camping. It's as small and lightweight as I could make it. Each of the overlapping side walls are 1.5 mm thick, so the…

Downloads
23
Likes
4
Rating
0

Abrelatas adaptado · Adapted can opener

Categoría : Producto de apoyo Contexto de uso: Alimentación y ocio Modo de uso : Para abrir latas mayoritariamente de conservas y/o con anillas grandes y de gran recorrido de apertura (sardinas, mejillones, etc.) Recomendaciones : Los…

Downloads
23
Likes
5
Rating
5

NRF52840 + SX1262 adapted case

Adaptada la carcasa para un NRF52840 y un SX1262 Tambien he agrandado el hueco de la bateria, ahora tenemos un hueco de 41mm x 25mm aprox., yo le he puesto una bateria de 1350 mAh y un bms y cabe perfecta. Dejad en comentarios si teneis…

Downloads
23
Likes
2
Rating
0
P
PrintablesMartin JM

Airbus A320 FCU ALT Knob adapted for Santi Luib III Mark 2

Altitude Select Knob for push pull encoder and 100/1000 select on A320 FCU adapted for Santi Luib III Mark 2

Downloads
22
Likes
1
Rating
0
P
PrintablesMomnoon

Magni adapted version for airflow.

Makes it compatible with the Magni. There is a model built in, as well as wing adapters for the original.

Downloads
21
Likes
4
Rating
0
P
Printablesdesordenado

Adapted the drill dust collector to be used on a washing machine drain hose

Drill dust collector adapted to work with a 26mm diameter hose used for washing machine drain pipe. This is part of my other model adapting the same pipe to be used with the Xiaomi Mini vacuum:…

Downloads
20
Likes
3
Rating
0
P
PrintablesDirk_P

Sovol SV06 Fan Duct 5015 Blower Fan Adapted

Fully based on and all credit to Sovol SV06 Fan Duct 5015 Blower Fan V3. Adapted the backplate so it fits in combination with Sovol SV06 (Plus) extruder mounted cable support . Printed in PETG, 0.18mm layer.

Downloads
20
Likes
0
Rating
0
P
Printablesmicrotherion

Camera mount, adapted for bayonet style connection to webcam

Camera mount model, adapted for my webcam which has a bayonet style mounting connection. FreeCad file is included, so all dimensions of the webcam connection are customizable and only the Prusa attachment side from the original model…

Downloads
19
Likes
2
Rating
0
P
PrintablesKrissiBT

Lens adapted for fuji film quick snap

adapted some of the parts to hold lenses from fuji film quick snap disposable cameras

Downloads
18
Likes
2
Rating
0
P
PrintablesBlueTip

BTT PiTFT50 Case (adapted to fit custom mount for Qidi Q2)

Added 1mm more space for the display thickness Added buttons Customized back plate

Downloads
18
Likes
5
Rating
0
P
PrintablesPinkbowhunter

lithholder adapted for ikea 205.431.57 led light

model reshaped to fit ikea 205.431.57 led light

Downloads
17
Likes
4
Rating
0
P
PrintablesJoBru

BBB Stem Headlight Mount (adapted from GoFix Mount to fit Busch Müller IQ-X)

Just a handy small piece which allows to mount a Headlight straight to the BBB Stems that are compatible with the GoFix Mount from BBB. Listed models on BBB website: BHS 09, 37 und 38Di2 but also fits the Actionstem BHS-52 as you see For…

Downloads
15
Likes
2
Rating
0
P
PrintablesSc1re

Molle adapted Fire Steel Holder

I modified this to attach to Molle as opposed to the knife. Thank you for doing the work on a great fire steel holder.

Downloads
14
Likes
4
Rating
0
P
Printablesarontaupe

4.2" ePaper Display Stand/Frame adapted for ESP32-DevKitC-1

Original stand and front cover still fit, please get the originals there, or use the ones also in the 3mf i widened the usb hole (my usb port was on the side, not the middle) Now the board is flippable. And i adjusted the bar to fit the…

Downloads
14
Likes
1
Rating
0
P
Printablesmatt dupreez

Adapted to fit more standard din devices

most din CB's have a notch behind them which does not allow them to clip into the original part, so that plate was remov

Downloads
13
Likes
0
Rating
0
P
PrintablesRaidy

BENTO BOX adapted for 5020 fans VORON style

Bento Box Filter Remix – 5020 Fan + Quick-Release A remixed Voron “Bento Box” air filter with a 5020 blower for more airflow and a quick-release lock for easy filter swaps. Still uses 4 magnets and the original filter cartridge (download…

Downloads
13
Likes
6
Rating
0