Search results: adaptor

Sort order

2,278 models

P
Printablessternli27

Bosch Professional 18V Battery Adaptor Adapter Module

This battery adapter is used in multiple of my other designs. For Makita 18V Batteries, see my design here: https://www.printables.com/model/436132/ For Milwaukee M18 Batteries, see my design here:…

Print approx. €4.30–€5.26 excl. taxPreliminary estimate for one variant

Downloads
1,988
Likes
239
Rating
4.6
P
Printablessternli27

Makita 18V Battery Connector Adaptor Adapter Module

This battery adapter is used in multiple of my other designs. For Bosch 18V Professional Batteries, see my design here: https://www.printables.com/model/427974/ For Milwaukee M18 Batteries, see my design here:…

Print approx. €4.45–€5.44 excl. taxPreliminary estimate for one variant

Downloads
1,086
Likes
109
Rating
5
P
PrintablesPeter

Cricut Sharpie Pen Adaptor

Add the ability to use Sharpie pens with your Cricut! Tested with the Maker, should work with other models too. Prints well with PLA, works well with the 'Avoid crossing perimeters' setting to ensure there's no stringing. I tried Martin…

Print approx. €0.30–€0.37 excl. taxPreliminary estimate for one variant

Downloads
388
Likes
43
Rating
5
P
PrintablesJoe Balough

e6000 to Luer Lock Syringe Adaptor

Never lose a drop of e6000 again! This thing adapts the e6000 nozzle to a luer lock so that you can load a glue syringe easily. To use: Screw the luer lock end on a syringe Jam the nozzle of e6000 in the other end Squeeze the e6000 tube…

Print approx. €0.14–€0.17 excl. taxPreliminary estimate for one variant

Downloads
295
Likes
30
Rating
0
P
Printablesnicholaskillin

Ryobi miter saw to shopvac adaptor

My miter saw is the Ryobi TSS103T. The inner diameter of the part that attaches to the miter saw is about 37.9mm (1.5 inches). The outer diameter of the part that attaches to the shopvac hose is 55mm (2 11/64 inches). I had to do just a…

Print approx. €2.30–€2.81 excl. taxPreliminary estimate for one variant

Downloads
292
Likes
42
Rating
5
P
PrintablesFilcuk

Inline Fan 100mm to 80mm Air Duct Adaptor

An adaptor to fit 80mm air duct onto a 100mm inline fan. The fan pipe outer diameter should be a few mm less than 100mm, and the adaptor should be a perfect fit. If your fan is not a good fit, scale the model using larger inner wall…

Print approx. €2.12–€2.59 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
203
Likes
22
Rating
4
P
PrintablesClamikra

Adaptor Disk for Prusament Spools for Bambu Re-Spooler by Miklos Kiszely

Inspired by the spool locking mechanism of the spool rewinder by jcjames_13009 I remixed the flat 50mm Spool holder of the wonderful Bambu Lab P1 / X1 / X1C / X1CC Filament Spool Switcher & Winder by Miklos Kiszely . I use the Bambu…

Print approx. €2.66–€3.25 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
169
Likes
39
Rating
5
P
PrintablesJames Bond

Print Bed Scraper Adaptor

Fits multiple different types of print bed scrapers. The scraper should be similar in form to the ones in the pictures. Use the included G-Code, or create your own from the STL file. Happy Printing!

Print approx. €0.33–€0.40 excl. taxPreliminary estimate for one variant

Downloads
164
Likes
26
Rating
0
P
Printablesstkl12

Roborock H7 - wall mount for adaptors

I used to have the adapters magnetically mounted to the charging station, but they never quite stayed there. So i quickly designed this wall mount. It is meant to be screw into the wall, but you can use the step-file to adjust it to your…

Print approx. €9.79–€11.96 excl. taxPreliminary estimate for one variant

Downloads
81
Likes
16
Rating
5
P
PrintablesRado

Parkside PMFAP router round adaptor

As you can see in pictures you can reassemble parts from existing router to this model. Only 1pc. M4 nut is needed to put in during printing at Z=30,5mm and continue printing.

Print approx. €5.28–€6.46 excl. taxPreliminary estimate for one variant

Downloads
79
Likes
33
Rating
0
P
PrintablesFC2M3D

DREAME adaptor for AQUAPUR Attachment (Remix)

I had this AQUAPUR adaptor for quite some time, but doesn't fit on my DREAME XR vacuum cleaner. So I remixed design from 3D Galaxy . I printed in PETG Infill: 30% or 40% Layer Height: 0.20mm Supports: Yes, organic If you like my work…

Print approx. €3.30–€4.03 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
79
Likes
11
Rating
0
P
PrintablesHellboy383

Go Pro adaptor

Go Pro Mount adaptor to suit Haydn Fiberglass extension pole. The one I used was available at Bunning NZ https://haydn.co.nz/collections/extension-poles/products/professional-extension-pole?variant=35674313490587 Print with 3 perimeters…

Print approx. €2.49–€3.05 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
69
Likes
11
Rating
0
P
PrintablesSteamroller17

Picture Frame Command Hook Adaptor

Small hook adaptor for Ikea(or similar) picture frames. I made this one specifically for Ribba Ikea frame and the Command 450g hook. Has a small tab to keep it on the frame while hanging it on the wall. Will update if I run into a…

Print approx. €0.08–€0.09 excl. taxPreliminary estimate for one variant

Downloads
64
Likes
8
Rating
0
P
PrintablesJoeBranch

Shopvac to Dust Cyclone Adaptor

Simple dust cyclone to shopvac hose adaptor. This allow to connect the “standard” amazon dust cyclone to the “standard” ridgid type shopvac hose! Don't forget to post a photo of the modele you make here in the Makes & Comment section to…

Print approx. €3.01–€3.68 excl. taxPreliminary estimate for one variant

Downloads
59
Likes
10
Rating
0
P
Printablesayjay

adaptor Somfy - Busch Jaeger adapter

It has to parts. An adapter for your Somfy remote control wich fits perfectly into a Busch Jaeger power outlet/light switch and a lid to cover it. You assamble it this way: 1: You put the adapter into the Busch Jaeger part, from behind.…

Print approx. €0.28–€0.35 excl. taxPreliminary estimate for one variant

Downloads
53
Likes
5
Rating
0
P
PrintablesOeschMe

Cupholder adaptor for Volvo FE (Updated to V2)

Pressure fitted adaptor for Volvo fE central console cup holder. I drink from 0,33 (slim) and 0,25 litre cans at work, and those won't stay upright in the original cupholder, so I made adaptor for it. V1 Doesn't fit regular (fat) 0,33 or…

Print approx. €4.79–€5.85 excl. taxPreliminary estimate for one variant

Downloads
28
Likes
1
Rating
0
P
Printableskraliks

Apple MagSafe Adaptor for Aukey MagSafe Charger Stand

Tested with Swissten's MagSafe but shall work with original MagSafe (similar dimensions). Nozzle 0.8 with layer 0.30 takes 16 minutes to print. Nozzle 0.4 with layer 0.20 takes 21 minutes ti print. Attached original project. Feel free to…

Print approx. €0.44–€0.54 excl. taxPreliminary estimate for one variant

Downloads
21
Likes
0
Rating
0

Magnet adaptor for goBilda uchannel.

This magnet adaptor holds tools and hardware in place while constructing projects. The adaptor can also be used to organize your smaller steel based hand tools. I designed the printed hardware base to align with goBuilda's extruded…

Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant

Downloads
4
Likes
0
Rating
0
P
PrintablesHonza David

Prusa lubricant LM8UU adaptor (Bearing pacifier)

Simple tool for lubricating LM8UU bearings. Print instructions New version! We found a few things we could improve, so we did, as we always do :-) Screw the printed tool on the Prusa Lubricant tube, carefully put the bearing on and turn…

Downloads
6,713
Likes
730
Rating
4.95
P
PrintablesNomad

Bambu Labs AMS Cardboard Spool Adaptor

I wasn't liking any of the spool adaptors I was finding for the AMS so I designed my own. This one snaps securely to the edge of the spool. It can easily be taken on and off the spool. I have tested it with Polymaker and Overture spools.

Downloads
2,927
Likes
346
Rating
4.83
P
PrintablesMartin Jakobsen

Can to mug adaptor

Its too cold outside to hold a cold beer after work so ive designed this to keep the cold fingers away from the even colder beer. Tested by hard and hardly working coworkers 10/10 Does not stand on table too great, but table doesnt mind…

Downloads
2,721
Likes
755
Rating
4.25
P
PrintablesZeeflyboy

Pimax Dream Air Facial Interface (Studioform v1) and Apple Strap Adaptors

NOTE: this interface was designed to suit the studioform BSB X1 foam interfaces/the original V1 studioform dream air interfaces (which were the same thing). If you want to use the newer v2 studioform interface they are notably larger and…

Downloads
2,636
Likes
79
Rating
4.75
P
PrintablesPrusa Research

Resin tank cleaning adaptor

This tiny part will help you get rid of cured resin leftovers stuck to the FEP foil on the bottom of the resin vat. Simply attach the part onto the front corner of the platform, trigger the cleaning procedure using the printer's…

Downloads
2,381
Likes
168
Rating
5
P
PrintablesHondzik

Gardena valve adaptor

this part: https://1url.cz/FKSrA for this valve: https://1url.cz/EKSry only small O-ring needed

Downloads
2,372
Likes
353
Rating
4.88
P
PrintablesYanev

Makita battery adaptor + XT60 + OBI

Parts are print oriented with no support. Only OBI Cap 2colors is not print oriented. It need 1pc M3x16mm and original connector 643852-2 (3,5 euro from Makita). Fusion360 file can be use to modify the model or import in other projects.…

Downloads
1,912
Likes
297
Rating
4.91
P
Printableskatech35

Cupholder Adaptor (Yeti Rambler & Nalgene)

I designed this adaptor for the cupholder in my 2018 F150 to hold either my 14oz Yeti Rambler or 32oz Nalgene bottle to keep them from sliding around the truck. Should fit 2015-2020 Ford F150's and also confirmed to fit in the 2021 Ram…

Downloads
1,823
Likes
304
Rating
4.91
P
PrintablesKretzu

PARKSIDE X20 Battery Adaptor

PARKSIDE X20 Battery Adaptor - adapt any power tool to use a Parkside x20 Battery . Revive your old tools.

Downloads
1,717
Likes
169
Rating
4.8
P
PrintablesMichael

Your last spool - Prusament Spool to Refill Adaptor (Masterspool)

Whats even better than upcycling? Not creating waste in the first place. This turns your Prusament-Spool into a Refill-one. If you are looking for a design that does not require glue, I recomment this one:…

Downloads
1,551
Likes
701
Rating
4.93
P
PrintablesRamjetX

RamjetX Thrustmaster T300 T500 TX TSPC 70mm Hub Adaptor Kit

Hi Internet Sim Racers, After doing a final test print of my Thrustmaster Txxx 70mm hub adaptor kit... I feel it's ready for public thrashing. Ok, so whats in the pack I hear you ask... through some form of audio bug I have in your…

Downloads
1,533
Likes
86
Rating
5
P
PrintablesFpstoaster

mantis tool grid adaptors

socket adapters for mantis tool grid system keeps long sockets from rolling around by standing them on an angle

Downloads
1,375
Likes
188
Rating
4
P
PrintablesZephyr

Cupholder Milk Crate Adaptor

I scaled the original model to 62% and added a base to the bottom to fit in most vehicles cup holders. Just want to add on that I'm not an original designer, this similar design has been in my local area however I could not find a file…

Downloads
1,342
Likes
73
Rating
5
P
PrintablesINeedOneDesigns

Prusa MK3 Spool Holder Side Mount Adaptor

I didn't like the weight of the spool on top of my printer any more So I designed an adaptor to use the original spool holder that came with my MK3, which adapts it to mount on the side of the printer. An easy print part, I printed mine…

Downloads
1,339
Likes
175
Rating
4.97
P
PrintablesJBoe

Lubricant LM8UU adaptor for Super Synco Lube DE21030 with screw cap

Purpose: Tool for lubricating LM8UU bearings with a 85g tube Super Synco Lube DE21030 synthetic grease and a screw cap. Are you looking for the same tool with screw cap for the original prusa grease tube? Look here:…

Downloads
1,320
Likes
212
Rating
5
P
PrintablesEl Manu

INTEX POOL ADAPTOR (Ø32mm and Ø38mm)

When you buy an Intex pool, it's coming with a small pump and hoses, generally too small for the pool volume : you have to buy a bigger pump with sand filter, generally sold with only ONE hose adaptor. This thing allow you to print the…

Downloads
1,284
Likes
129
Rating
5
P
PrintablesFyrby Additive

120mm Fan To 100mm Pipe Adaptors

🟩 🟦 🟦 🟪 🟥 🟧 🟨 Design These items are made to fit to standard 120mm fans commonly made by computer, chassis and rack fan manufacturers to connect to a 100mm flexible ventilation pipe with a clamp. There are two different looks available.…

Downloads
1,280
Likes
180
Rating
5
P
Printablesleeii3

Makita DVC750L vacuum adaptor for Makita DBO180

Makita DVC750L vacuum adaptor for Makita DBO180

Downloads
1,257
Likes
218
Rating
4.8
P
Printablesmakemeone.xyz

Snapmaker U1 - PTFE Adaptor for Autofeeder - minimal print time

Why and what for This will allow you to connect 4mm OD (standard size) PTFE Tubing to Autofeeders of Snapmaker U1. You can customize all the colors. Discussion topic -…

Downloads
1,250
Likes
230
Rating
4.86
P
PrintablesTache

CAMLOCK Adaptors (in 0.5 mm increments)

These are CAMLOCK compatable nozzles from 20mm to 80mm (in 0.5 mm increments). They are compatable with the awesome and award winning CAMLOCK Connector by @peterh . Hints: You may want to flip the prints to have the wider diamater ends on…

Downloads
1,182
Likes
306
Rating
5
P
PrintablesMartin_au

Sunlu S2 reverse bowden adaptor

Technically not a remix, but the concept is similar enough to VoltexRB's work that I've nominated it as such. Basically works the same as their version, but has a slightly better fit and deeper grooves to make it harder to come loose.

Downloads
1,159
Likes
172
Rating
4.94
P
PrintablesNoctua_at

NA-FMA1 120/140mm Adaptor for Noctua 120mm fans

The NA-FMA1 fan mounting adaptor permits the installation of the NF-A12x25 and several other Noctua 120mm fans on 140mm watercooling radiators (or other screw-mount applications that are designed for 140mm fans, e.g. as a case fan).…

Downloads
1,159
Likes
458
Rating
5
P
PrintablesHaro

Creality Ender3 V3 SE Spool Holder 90 degree rotating Adaptor

The existing spool holder of the ender 3 V3 SE added to the shaking of the Z-axis to reduce shaking and enable better filament supply by rotating the direction of the spool holder 90 degrees. material 1. M5 nuts x 2 2. M5 x 15mm = 1, M5 x…

Downloads
1,136
Likes
95
Rating
5
P
PrintablesWeissnix4711

Logitech G29/G920 Quick Release adaptor

WIP! Let me know how well it works. Logitech G29/G920 Quick Release adaptor using 32mm bike seat clamp, like this one . Files Female adaptor for fitting to the Logitech base Male adaptor for refitting original Logitech wheel Male adaptors…

Downloads
1,121
Likes
93
Rating
5
P
Printables05WEL

Dewalt Battery to Makita Tools adaptor

Cordless tool battery adapter. Dewalt Battery to Makita skin tools Extra hardware spade connectors wire 9mm female terminal fuse terminal M3 x10mm bolt & Hex nut Prep spade connectors like this, flatten out the shoulders if you can…

Downloads
1,055
Likes
138
Rating
5
P
PrintablesRipe3D

Flex Atx to Atx PSU adaptor plate

Flex ATX to ATX PSU adaptor Plate. The Horizontal orientated adaptor is also compatible with 1u PSUs. Allows you to fit a Flex ATX power supply onto standard ATX PSU mounting points. Please select the required Orientation. Each Adaptor…

Downloads
989
Likes
47
Rating
5
P
PrintablesKelly Egan

GoPro to tripod mount adaptor

This is an adaptor to convert a GoPro mount (either side) to a standard 1/4-20 tripod mount. Print instructions Category: Camera Post-Printing A 3/4 inch 1/4-20 bolt is pressed into the mount base and a 1/4-20 screw can be glued into the…

Downloads
983
Likes
172
Rating
4.8
P
PrintablesPeter H

SHOPVAC CAMLOCK ACCESSORY ADAPTOR

DOWNLOAD CAMLOCK end fitting HERE. This part will make any of my old VACUUM ADAPTERS compatable to the new CAMLOCK end. It will be useful if you want to change over before making new fittings or if you like the new setup but don't want to…

Downloads
912
Likes
146
Rating
5
P
Printablesryantaylor

Bi-Directional J1772 Tesla Adaptor Lock

A design by EGoe from Thingiverse for a J1772 Tesla Adaptor Lock, with some considerate modifications: Bi-directional There is a small press-fit that helps keep the ring attached to the adaptor while you carry it around. There are two…

Downloads
900
Likes
101
Rating
5
P
PrintablesAlex D

Festool D27 hose adaptor

I made this adaptor to connect my Festool D27 hose to some cheap Titan shop vac attachments I bought, but it should fit any attachments with an internal diameter of 32 mm. The Festool cleantec end locks into place with retaining tabs…

Downloads
874
Likes
86
Rating
5
P
Printablesmoebio

T-ring T2 adaptors for Canon EOS for telescopes

T-ring adaptors for 2" and 1.25", should work on any telescope. The adaptor if of the EF type, it should work on any Canon EOS cameras.

Downloads
854
Likes
63
Rating
5

MWS Speedloader/Odin Adaptor

Update I have re-moddled it as the old file was a bit of a mess, new file and STEPs in the ‘Remodeled’ folder in the file list. (The fullsize versions still use the same mag catch.) Also, please use the print orientation shown in the…

Downloads
830
Likes
31
Rating
3
P
PrintablesFelstedSkiver

35mm to 120/220 film adaptor kit for Hasselblad and other roll film cameras

If you have a camera capable of taking 220 roll film you can use it to expose a full roll of 35mm film using the adaptors in this print. I've tried other 3D-printed adaptors but none worked in my Hasselblad A24 magazines, which is why I…

Downloads
803
Likes
108
Rating
5
P
PrintablesNoel Swede

5.25 x 4 bay to 3.5 x 6 hdd adaptor

low material HDD adaptor for 5.25 x 4 bay everything is provided. you will want a fan to keep the drives cool. I use it in my NAS to hold more drives.

Downloads
776
Likes
115
Rating
5
P
Printables05WEL

Dewalt Battery to Dyson V6 - adaptor

Dewalt Battery to Dyson V6 - adaptor Version 2 -- https://www.printables.com/model/1897716-dewalt-battery-to-dyson-v6-adaptor-_-version-2 No soldering needed Requirements SP0702 switch…

Downloads
717
Likes
99
Rating
5
P
PrintablesSimon

CR2032 to CR2450 adaptor

I created this battery adaptor for my aqara motion sensor as I had plenty of CR2032 batteries but no CR2450. Version 2 is 4mm thick that fitted perfectly with the motion sensor. I have included the 5mm version for other applications.

Downloads
710
Likes
61
Rating
5
P
Printablesjhobson

Canon RF adaptor

We have templates for both male and female pairs of the RF mount. They fit my camera and lenses without further modification. Having done this, I belive it is possible to have a mount that fits both RF and EF - you just have to cut a bit…

Downloads
700
Likes
39
Rating
0
P
PrintablesRob Kenny

Parkside & Ferrex tool adaptors to use Dewalt battery

My Main tools are Dewalt for which I am deep into the battery platform. Note: There are 2 versions of the Ferrex platform. examine the pictures to check if this matches. As a diyer, I can't justify buying all professional tools: some are…

Downloads
689
Likes
49
Rating
3
P
PrintablesTripi

Dummy 13 Magnet adaptor

Attach your Dummy13 to a metallic surface! Simple Magnet holder for the hip of a standard Dummy 13. it holds a 12mm x 2mm round magnet. Use standard Dummy13 Print settings, glue the magnet in the slot. Any feedback is welcomed!

Downloads
673
Likes
242
Rating
5
P
Printables05WEL

Dewalt Battery to Milwaukee Tools adaptor

Cordless tool battery adapter. Dewalt Battery to Milwaukee skin tools Extra hardware 6mm male spade connector x2 wire female fuse terminal x3 M3 x10mm bolt & Hex nut x2 470k resistor spring (0.5mm, 35mm, 5mm) a retractable pen spring will…

Downloads
671
Likes
106
Rating
4.5
P
Printablesbagofbagels

Beyblade Metal Fusion Adaptor for Beyblade X

Use your metal fusion beyblades with your Beyblade X launcher! You likely will want to remove the stem within the X launcher (that is for the BeyPass) as it may damage the face bolt sticker. The Beyblade X prongs will be pried off when…

Downloads
662
Likes
34
Rating
0
P
PrintablesCarl Slaughter

Carpuride W702 to Quadlock Receiver Adaptor

UPDATE 04-17-2024: I realized that the ram style mount on the back of the device is also used as a heat sink for the CPU inside the unit, so I modified the mount to include openings to allow for air flow around the aluminum mount plate.…

Downloads
650
Likes
28
Rating
5
P
PrintablesRamjetX

RamjetX Logitech G25/G27/G29 70mm Hub Adaptor Kit (Updated June 2019)

Hi Internet Sim Racers! I present the Logitech 70mm Hub Adaptor "kit" with 2 versions and a Quick Release Hub Adaptor. Whats in the Pack? 1) Standard 70mm adapter puck similar to that which is very popular. 2) Stubby 70mm adapter which…

Downloads
643
Likes
37
Rating
0
P
PrintablesMakes_by_Jake

90° Irwin Quick Clamp adaptor, Corner Clamp

This converts your Irwin quick clamps into a device to hold two boards at a 90° angle. I added metric and standard measurements on top and large holes so screws can be placed while the clamp is holding the pieces together. 50% infil…

Downloads
642
Likes
108
Rating
4.75
P
PrintablesMatthias

Kärcher WD Vacuum-Cleaner Adaptor

Use this adaptor to connect your vacuum hose. You need my further adaptors to connect this adaptor to your woodworking machine. I would be happy if you would design more adapters for the basic module. You can finde a file with the basic…

Downloads
628
Likes
92
Rating
4.6

Flashforge AD5X filament reel adaptor

Filament reel adaptor for Flashforge AD5X 62mm file and 73mm file

Downloads
611
Likes
62
Rating
4.67
P
Printablesippe

Ryobi Workshop blower adaptor

The blower is RYOBI ONE+ R18TB-0, and it's about 60 euros here in Europe. The blower has very good air flow but to get most use out of it, you really need some adaptors for it. This adaptor fits our camping mattresses and I'm sure all…

Downloads
604
Likes
100
Rating
5
P
Printablesmakeruniverse

Window adaptor for 100mm ventilation pipe (growtent ventilation)

We needed to get rid of resin smell. Solution: growtent with ventilation setup. Prints without support on prusa xl

Downloads
603
Likes
154
Rating
0
P
PrintablesTeachingTech

Dyson stick vacuum Ryobi battery adaptor

I had a dead Dyson battery in my V8 Absolute stick vacuum for a second time. Rather than buy a replacement battery (o a replacement vacuum), I created these printer parts so the Dyson could use Ryobo one+ 18V batteries. The result? It…

Downloads
600
Likes
201
Rating
5
P
PrintablesmahatmaJman

TS100 Dewalt battery adaptor

Iron stand and adaptor clip for TS100 iron and Dewalt Li-Ion batteries. Use 0.5mm copper sheet for the connecting blades, and XT60 connector for connection to TS100 standart XT60 lead. Use the printable jig to solder the connector to the…

Downloads
594
Likes
336
Rating
4.75
P
Printablesjosepilar

DJI O3 Air Unit Cage 20x20 and 30x30 adaptor

Didn't like the idea of removing screws to mount the O3 air unit into a tpu mount adapter so I designed this case for the unit to sit on, it has 20x20mm and 30x30mm mounting holes, a channel to run wires under and a couple of braces that…

Downloads
588
Likes
30
Rating
0
P
PrintablesNottub

Router Table Adaptor for Makita

Adaptor for mounting the router to the board

Downloads
566
Likes
134
Rating
5
P
PrintablesSpudd78

11" 2021 Ipad Pro adaptor for DJI RC-N1 controller

Want to use your 2021 11" Ipad pro as the interface for your DJI mini RC-N1 controller instead of a phone? Don't want to remove the Ipad from the Logitech Touch Combo case ( https://www.amazon.co.uk/gp/product/B07W4DH1Y5 but are ok to…

Downloads
558
Likes
60
Rating
5
P
Printablesnot michael

Case for iPad 10 + Pencil (1st gen)+ Adaptor

Printed with PETG in a Bambu P1S. Pencil mounted on the left side as it makes carrying the iPad easier, for me at least. Lays flat on the table, makes writing/drawing easier. Edit: adjusted the dimensions a little for a better fit, added…

Downloads
558
Likes
48
Rating
0
P
PrintablesHonza David

Prusa lubricant LM10LUU adaptor (Bearing pacifier)

This improved MK4 version has some new features you asked for - we found a few things we could improve, so we did, as we always do :-) Screw the printed tool on the Prusa Lubricant tube, carefully put the bearing on and turn it…

Downloads
545
Likes
68
Rating
5
P
Printables05WEL

Makita Battery to Dyson V6 - adaptor

Makita Battery to Dyson V6 - adaptor No soldering needed Requirements SP0702 switch (https://www.jaycar.com.au/spst-red-momentary-round-pushbutton/p/SP0702) 9.5mm male spade terminals (https://www.aliexpress.com/item/4001062653078.html)…

Downloads
543
Likes
50
Rating
4.5
P
PrintablesSi1verEag1e

Airsoft MP5 mag adaptor for AK

DISCLAIMER: Airsoft part only, utterly useless in any real firearm! It started as a joke, then became a bet and in the end turned into surprisingly working project: Someone offered me an MP5 hi-cap he had no use for, and i wondered, if i…

Downloads
537
Likes
56
Rating
0
P
PrintablesBillC

1/2 inch NPT Male/Female adaptor

Recently had a bathroom fitting break in the wall because it was under too much tension. Needed an adaptor to relieve that strain and could not find any. So I imported both male and female garden hose fittings and cut and stitched to give…

Downloads
536
Likes
15
Rating
0
P
PrintablesmahatmaJman

Dewalt battery to XT60 adaptor

Two piece adaptor that clips to the top of a Dewalt battery and provides an XT60F connection out. I used some 0.5mm copper sheet for this to create the contacts, but you could flatten a thick copper wire or use tin to do the job. Cut and…

Downloads
535
Likes
137
Rating
5
P

elegoo spool adaptor

elegoo spool adaptor

Downloads
530
Likes
49
Rating
5
P
PrintablesSouthpawBob

Neptune 4 Spool holder adaptor

This adaptor allows you to move the spool holder from your Neptune 4 (and probably 3? Please let me know!) off the top of the printer and mount it to a wall, or in my case to a board to sit beside the printer. This should improve…

Downloads
529
Likes
95
Rating
5
P
PrintablesFyrby Additive

140mm Fan To 100mm Pipe Adaptors

🟩 🟦 🟦 🟪 🟥 🟧 🟨 Design These items are made to fit to standard 140mm fans commonly made by computer, chassis and rack fan manufacturers to connect to a 100mm flexible ventilation pipe with a clamp. There are two different looks available.…

Downloads
515
Likes
95
Rating
4
P
PrintablesAlex Collins

Lubricant LM8UU adaptor (Bearing pacifier) for Super Lube 210XX

The applicator end is unmodified. Threaded end is enlarged and modified to have a 9/16-16 UN thread to fit an 85g Super Lube tube. Note: the thread dimensions were found by trial and error, so might not be exactly right, but seem to fit…

Downloads
500
Likes
79
Rating
5
P
PrintablesReypatey

Quechua Air Mattress / Luftmatratze Adaptor to Bike Pump

Adaptor for Decathlon Quechua Air Mattresses to regular Bike Pumps. My Mattresses intake is about 17.6mm wide. The Adaptor's width goes from 16mm to 19mm and it's 40mm high plus the little screwthread part. I've printed mine with 0.2mm…

Downloads
494
Likes
30
Rating
5
P
Printables05WEL

Milwaukee Battery to Dyson V6 - adaptor

Milwaukee Battery to Dyson V6 - adaptor No soldering needed Requirements SP0702 switch (https://www.jaycar.com.au/spst-red-momentary-round-pushbutton/p/SP0702) 6mm male spade terminals…

Downloads
480
Likes
42
Rating
0
P
Printablesralphius

28BYJ-48 stepper to Lego Technic adaptor plate

Mounting plate with 10 Lego technic compatible peg holes that clips round a standard, cheap 28BYJ-48 unipolar stepper motor. The stepper motor drive axle is perfectly aligned so as to mesh with other technic gears. Printed on an TronXY…

Downloads
473
Likes
55
Rating
0
P
PrintablesPatrick

Cap for Prusa lubricant LM8UU adaptor

A Cap for the "Prusa lubricant LM8UU adaptor" Designed by Honza David. This is ONLY the Cap, for the adaptor check out David Honza´s Design. It is a loose fit . If you want it to be tight scale in down in the slicer. “With some trial and…

Downloads
466
Likes
53
Rating
4.71
P
PrintablesAnsh

HydroFlask Car Cup Holder Adaptor

Designed for the 40oz / 1.2L HydroFlask bottle. Measurements of the section that goes into the car's cup holder: Diameter: 7.5 cm Height: 5.72 cm

Downloads
463
Likes
56
Rating
5
P
Printables05WEL

Milwaukee Battery to Dyson V7-8 - adaptor

Milwaukee Battery to Dyson V7-8 - adaptor No soldering needed Requirements SP0702 switch (https://www.jaycar.com.au/spst-red-momentary-round-pushbutton/p/SP0702) 6mm male spade terminals…

Downloads
452
Likes
44
Rating
5
P
Printablesairnozzle

Pet Bottle Thread to 1 Inch NPT Thread Adaptor (Homebrewing)

I use this adaptor to attach 1 inch ball valves to Pet Bottles to use them as conical fermenters and drain yeast easily Print with 0.1mm layer height and 100% infill.

Downloads
449
Likes
22
Rating
5
P
PrintablesTomR

12/16 - 16/22 Hose Adaptor

This adaptor allows you to combine two hoses with different diameters (12/16 mm to 16/22 mm), especially in a fish tank. This is useful if your filter has a different water-output than your aquarium inflow. The outer diameter of the…

Downloads
448
Likes
65
Rating
5

Safariland to Amomax Holster Adaptor

Update: Updated the model and re-did the interface for the Amomax side. Slightly thickened the whole thing and generally made it a bit nicer. Printing Instructions No support needed in the nut hole on the bottom. For settings I would…

Downloads
446
Likes
32
Rating
5
P
PrintablesBRIM

Dremel 300 Router Adaptor

Adaptor for Dremel 300 to be used as a router tool. Helps to move the router in a given distance over the surface of a part to be routed. Printed in PLA 0.2mm. Three parts: router adaptor, distance ring, knob. Other parts needed: Knob to…

Downloads
446
Likes
89
Rating
5
P

PVC Pipe T-Joint/L-Joint Adaptor

PVC Adaptor for 15mm Nominal Diameter PVC (Actual inner diameter is 18mm and outer diameter is 21.6mm) Update: T-Joint REV1 (31/5/'17): Apologies: I had the model oriented incorrectly. L-Joint Added (3/6/'17) Corner-Joint Added (9/8/'17)…

Downloads
436
Likes
78
Rating
0
P
PrintablesReyesR97

AD5X Spool Adaptor for every size

Adaptor for every size spool

Downloads
434
Likes
55
Rating
5
P
PrintablesPanda Makes

Tesla M40 120mm fan adaptor

I needed a way to cool my Tesla M40 in a traditional ATX case. This allows a 120mm fan to be used to cool the M40. I used this fan (warning it is vary loud and will need some sort of speed control)…

Downloads
432
Likes
12
Rating
0
P
PrintablesJamzy

Jonsbo N4 - Slim Front Fan Adaptor & 120x25mm fan version

Large bed only. (6/2/2025): added 25mm height fan model Print with support.

Downloads
421
Likes
17
Rating
0
P
PrintablesJason Fenn

73mm filament spool adaptor for Flashforge AD5X printers

73mm filament spool adaptor for Flashforge AD5X printers. Based on ELEGOO spool 73mm diameter and 61mm depth.

Downloads
416
Likes
41
Rating
5
P
PrintablesWyMafia

Chain lube adaptor - Extended face

At the request of a biker friend of mine, I've extended the edge facing towards the bike to further prevent overspray onto the bike's frame, engine and wheel.

Downloads
415
Likes
40
Rating
4.5
P
PrintablesiamSteve

E27 to E14 Lamp Shade Reducer Adaptor (Euro to UK)

You can print this without using supports and using 20% fill. It provides the same stiffness as a purchased adaptor and should pop straight into the lamp shade once printed. Note : (nothing to do with the print). When fitting the light…

Downloads
414
Likes
35
Rating
5
P
PrintablesEllie Lou

4 Inch Vent Adaptor For Bambu X1C and P1S

An adapter to attach the P1S or X1C's chamber exhaust to a 4" hose for exhausting it outdoors. I printed mine at 100% infill, 4 wall loops, in standard PLA. (Even when printing high temperature materials like nylon, I haven't found the…

Downloads
410
Likes
61
Rating
0
P
PrintablesHeiko

vakuum adaptor for Makita DHS680 (US: Makita XSH03) circular saw

This is an adapter made to suck dust from my Makita DHS680 circular saw with a shop vacuum. opening is 38mm in diameter. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Resolution: low Infill: 25%…

Downloads
406
Likes
62
Rating
3